include/configs: drop default definitions of CONFIG_SYS_MAXARGS

[people/ms/u-boot.git] / include / configs / vf610twr.h

diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index f122c9886f90c5f7f85eb59928043806de56c244..7fd59a103386de50d7e0ac068480c02acf8307d6 100644 (file)
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -11,8 +11,6 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_VF610
-
 #define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_MACH_TYPE               4146
@@ -22,7 +20,6 @@
 /* Enable passing of ATAGs */
 #define CONFIG_CMDLINE_TAG
 
-#define CONFIG_CMD_FUSE
 #ifdef CONFIG_CMD_FUSE
 #define CONFIG_MXC_OCOTP
 #endif
@@ -30,28 +27,17 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE                        115200
 
 /* NAND support */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR
 
-/* UBI */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
 /* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 #define MTDIDS_DEFAULT                 "nand0=fsl_nfc"
@@ -68,16 +54,11 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
 
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE            RMII
 #define CONFIG_FEC_MXC_PHYADDR          0
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 
 /* QSPI Configs*/
 
@@ -208,21 +189,11 @@
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #undef CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              \
-                       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START       0x80010000
 #define CONFIG_SYS_MEMTEST_END         0x87C00000
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE               (128 * 1024)    /* regular stack */
-
 /* Physical memory map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     (0x80000000)
@@ -237,9 +208,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
 #ifdef CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_SIZE                        (8 * 1024)