/* Header file for targets using CGEN: Cpu tools GENerator.
-Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc.
+ Copyright (C) 1996-2021 Free Software Foundation, Inc.
-This file is part of GDB, the GNU debugger, and the GNU Binutils.
+ This file is part of GDB, the GNU debugger, and the GNU Binutils.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along
-with this program; if not, write to the Free Software Foundation, Inc.,
-59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
-#ifndef CGEN_H
-#define CGEN_H
+#ifndef OPCODE_CGEN_H
+#define OPCODE_CGEN_H
-/* Version information. */
-#define CGEN_VERSION_MAJOR 0
-#define CGEN_VERSION_MINOR 6
-#define CGEN_VERSION_FIXLEVEL 0
+#include "symcat.h"
+#include "cgen/bitset.h"
-/* Prepend the arch name, defined in <arch>-opc.h, and _cgen_ to symbol S.
+/* ??? IWBN to replace bfd in the name. */
+#include "bfd_stdint.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ??? This file requires bfd.h but only to get bfd_vma.
+ Seems like an awful lot to require just to get such a fundamental type.
+ Perhaps the definition of bfd_vma can be moved outside of bfd.h.
+ Or perhaps one could duplicate its definition in another file.
+ Until such time, this file conditionally compiles definitions that require
+ bfd_vma using __BFD_H_SEEN__. */
+
+/* Enums must be defined before they can be used.
+ Allow them to be used in struct definitions, even though the enum must
+ be defined elsewhere.
+ If CGEN_ARCH isn't defined, this file is being included by something other
+ than <arch>-desc.h. */
+
+/* Prepend the arch name, defined in <arch>-desc.h, and _cgen_ to symbol S.
The lack of spaces in the arg list is important for non-stdc systems.
- This file is included by <arch>-opc.h.
- It can be included independently of <arch>-opc.h, in which case the arch
+ This file is included by <arch>-desc.h.
+ It can be included independently of <arch>-desc.h, in which case the arch
dependent portions will be declared as "unknown_cgen_foo". */
#ifndef CGEN_SYM
/* The assembler syntax is made up of expressions (duh...).
At the lowest level the values are mnemonics, register names, numbers, etc.
Above that are subexpressions, if any (an example might be the
- "effective address" in m68k cpus). At the second highest level are the
- insns themselves. Above that are pseudo-insns, synthetic insns, and macros,
- if any.
-*/
+ "effective address" in m68k cpus). Subexpressions are wip.
+ At the second highest level are the insns themselves. Above that are
+ pseudo-insns, synthetic insns, and macros, if any. */
\f
/* Lots of cpu's have a fixed insn size, or one which rarely changes,
and it's generally easier to handle these by treating the insn as an
integer type, rather than an array of characters. So we allow targets
- to control this. */
+ to control this. When an integer type the value is in host byte order,
+ when an array of characters the value is in target byte order. */
-#ifdef CGEN_INT_INSN
-typedef unsigned int cgen_insn_t;
+typedef unsigned int CGEN_INSN_INT;
+typedef int64_t CGEN_INSN_LGSINT; /* large/long SINT */
+typedef uint64_t CGEN_INSN_LGUINT; /* large/long UINT */
+
+#if CGEN_INT_INSN_P
+typedef CGEN_INSN_INT CGEN_INSN_BYTES;
+typedef CGEN_INSN_INT *CGEN_INSN_BYTES_PTR;
#else
-typedef char * cgen_insn_t;
+typedef unsigned char *CGEN_INSN_BYTES;
+typedef unsigned char *CGEN_INSN_BYTES_PTR;
#endif
#ifdef __GNUC__
-#define CGEN_INLINE inline
+#define CGEN_INLINE __inline__
#else
#define CGEN_INLINE
#endif
};
/* Forward decl. */
+
typedef struct cgen_insn CGEN_INSN;
/* Opaque pointer version for use by external world. */
-typedef struct cgen_opcode_table * CGEN_OPCODE_DESC;
+
+typedef struct cgen_cpu_desc *CGEN_CPU_DESC;
\f
/* Attributes.
- Attributes are used to describe various random things.
- ??? Will need to be revisited when expression support is added. */
+ Attributes are used to describe various random things associated with
+ an object (ifield, hardware, operand, insn, whatever) and are specified
+ as name/value pairs.
+ Integer attributes computed at compile time are currently all that's
+ supported, though adding string attributes and run-time computation is
+ straightforward. Integer attribute values are always host int's
+ (signed or unsigned). For portability, this means 32 bits.
+ Integer attributes are further categorized as boolean, bitset, integer,
+ and enum types. Boolean attributes appear frequently enough that they're
+ recorded in one host int. This limits the maximum number of boolean
+ attributes to 32, though that's a *lot* of attributes. */
+
+/* Type of attribute values. */
+
+typedef CGEN_BITSET CGEN_ATTR_VALUE_BITSET_TYPE;
+typedef int CGEN_ATTR_VALUE_ENUM_TYPE;
+typedef union
+{
+ CGEN_ATTR_VALUE_BITSET_TYPE bitset;
+ CGEN_ATTR_VALUE_ENUM_TYPE nonbitset;
+} CGEN_ATTR_VALUE_TYPE;
/* Struct to record attribute information. */
+
typedef struct
{
- unsigned char num_nonbools;
- unsigned int bool;
- unsigned int nonbool[1];
+ /* Boolean attributes. */
+ unsigned int bool_;
+ /* Non-boolean integer attributes. */
+ CGEN_ATTR_VALUE_TYPE nonbool[1];
} CGEN_ATTR;
/* Define a structure member for attributes with N non-boolean entries.
- The attributes are sorted so that the non-boolean ones come first.
- num_nonbools: count of nonboolean attributes
- bool: values of boolean attributes
- nonbool: values of non-boolean attributes
- There is a maximum of 32 attributes total. */
+ There is no maximum number of non-boolean attributes.
+ There is a maximum of 32 boolean attributes (since they are all recorded
+ in one host int). */
+
#define CGEN_ATTR_TYPE(n) \
-struct { unsigned char num_nonbools; \
- unsigned int bool; \
- unsigned int nonbool[(n) ? (n) : 1]; }
+struct { unsigned int bool_; \
+ CGEN_ATTR_VALUE_TYPE nonbool[(n) ? (n) : 1]; }
+
+/* Return the boolean attributes. */
+
+#define CGEN_ATTR_BOOLS(a) ((a)->bool_)
+
+/* Non-boolean attribute numbers are offset by this much. */
+
+#define CGEN_ATTR_NBOOL_OFFSET 32
+
+/* Given a boolean attribute number, return its mask. */
-/* Given an attribute number, return its mask. */
#define CGEN_ATTR_MASK(attr) (1 << (attr))
/* Return the value of boolean attribute ATTR in ATTRS. */
-#define CGEN_BOOL_ATTR(attrs, attr) \
-((CGEN_ATTR_MASK (attr) & (attrs)) != 0)
+
+#define CGEN_BOOL_ATTR(attrs, attr) ((CGEN_ATTR_MASK (attr) & (attrs)) != 0)
/* Return value of attribute ATTR in ATTR_TABLE for OBJ.
- OBJ is a pointer to the entity that has the attributes.
- It's not used at present but is reserved for future purposes. */
+ OBJ is a pointer to the entity that has the attributes
+ (??? not used at present but is reserved for future purposes - eventually
+ the goal is to allow recording attributes in source form and computing
+ them lazily at runtime, not sure of the details yet). */
+
#define CGEN_ATTR_VALUE(obj, attr_table, attr) \
-((unsigned int) (attr) < (attr_table)->num_nonbools \
- ? ((attr_table)->nonbool[attr]) \
- : (((attr_table)->bool & (1 << (attr))) != 0))
+((unsigned int) (attr) < CGEN_ATTR_NBOOL_OFFSET \
+ ? ((CGEN_ATTR_BOOLS (attr_table) & CGEN_ATTR_MASK (attr)) != 0) \
+ : ((attr_table)->nonbool[(attr) - CGEN_ATTR_NBOOL_OFFSET].nonbitset))
+#define CGEN_BITSET_ATTR_VALUE(obj, attr_table, attr) \
+ ((attr_table)->nonbool[(attr) - CGEN_ATTR_NBOOL_OFFSET].bitset)
/* Attribute name/value tables.
- These are used to assist parsing of descriptions at runtime. */
+ These are used to assist parsing of descriptions at run-time. */
typedef struct
{
const char * name;
- int value;
+ unsigned value;
} CGEN_ATTR_ENTRY;
-/* For each domain (ifld,operand,insn), list of attributes. */
+/* For each domain (ifld,hw,operand,insn), list of attributes. */
typedef struct
{
const char * name;
- /* NULL for boolean attributes. */
+ const CGEN_ATTR_ENTRY * dfault;
const CGEN_ATTR_ENTRY * vals;
} CGEN_ATTR_TABLE;
\f
+/* Instruction set variants. */
+
+typedef struct {
+ const char *name;
+
+ /* Default instruction size (in bits).
+ This is used by the assembler when it encounters an unknown insn. */
+ unsigned int default_insn_bitsize;
+
+ /* Base instruction size (in bits).
+ For non-LIW cpus this is generally the length of the smallest insn.
+ For LIW cpus its wip (work-in-progress). For the m32r its 32. */
+ unsigned int base_insn_bitsize;
+
+ /* Minimum/maximum instruction size (in bits). */
+ unsigned int min_insn_bitsize;
+ unsigned int max_insn_bitsize;
+} CGEN_ISA;
+
+/* Machine variants. */
+
+typedef struct {
+ const char *name;
+ /* The argument to bfd_arch_info->scan. */
+ const char *bfd_name;
+ /* one of enum mach_attr */
+ int num;
+ /* parameter from mach->cpu */
+ unsigned int insn_chunk_bitsize;
+} CGEN_MACH;
+\f
/* Parse result (also extraction result).
The result of parsing an insn is stored here.
if it ever gets inlined. On architectures where insns all have the same
size, may wish to detect that and make this macro a constant - to allow
further optimizations. */
+
#define CGEN_FIELDS_BITSIZE(fields) ((fields)->length)
\f
+/* Extraction support for variable length insn sets. */
+
+/* When disassembling we don't know the number of bytes to read at the start.
+ So the first CGEN_BASE_INSN_SIZE bytes are read at the start and the rest
+ are read when needed. This struct controls this. It is basically the
+ disassemble_info stuff, except that we provide a cache for values already
+ read (since bytes can typically be read several times to fetch multiple
+ operands that may be in them), and that extraction of fields is needed
+ in contexts other than disassembly. */
+
+typedef struct {
+ /* A pointer to the disassemble_info struct.
+ We don't require dis-asm.h so we use void * for the type here.
+ If NULL, BYTES is full of valid data (VALID == -1). */
+ void *dis_info;
+ /* Points to a working buffer of sufficient size. */
+ unsigned char *insn_bytes;
+ /* Mask of bytes that are valid in INSN_BYTES. */
+ unsigned int valid;
+} CGEN_EXTRACT_INFO;
+\f
/* Associated with each insn or expression is a set of "handlers" for
performing operations like parsing, printing, etc. These require a bfd_vma
value to be passed around but we don't want all applications to need bfd.h.
So this stuff is only provided if bfd.h has been included. */
-#ifdef BFD_VERSION
-
/* Parse handler.
- OD is an opcode table descriptor.
+ CD is a cpu table descriptor.
INSN is a pointer to a struct describing the insn being parsed.
STRP is a pointer to a pointer to the text being parsed.
FIELDS is a pointer to a cgen_fields struct in which the results are placed.
If not it is left alone.
The result is NULL if success or an error message. */
typedef const char * (cgen_parse_fn)
- PARAMS ((CGEN_OPCODE_DESC /*od*/, const CGEN_INSN * /*insn*/,
- const char ** /*strp*/, CGEN_FIELDS * /*fields*/));
+ (CGEN_CPU_DESC, const CGEN_INSN *insn_,
+ const char **strp_, CGEN_FIELDS *fields_);
/* Insert handler.
- OD is an opcode table descriptor.
+ CD is a cpu table descriptor.
INSN is a pointer to a struct describing the insn being parsed.
FIELDS is a pointer to a cgen_fields struct from which the values
are fetched.
INSNP is a pointer to a buffer in which to place the insn.
PC is the pc value of the insn.
The result is an error message or NULL if success. */
+
+#ifdef __BFD_H_SEEN__
typedef const char * (cgen_insert_fn)
- PARAMS ((CGEN_OPCODE_DESC, const CGEN_INSN * /*insn*/,
- CGEN_FIELDS * /*fields*/, cgen_insn_t * /*insnp*/,
- bfd_vma /*pc*/));
+ (CGEN_CPU_DESC, const CGEN_INSN *insn_,
+ CGEN_FIELDS *fields_, CGEN_INSN_BYTES_PTR insnp_,
+ bfd_vma pc_);
+#else
+typedef const char * (cgen_insert_fn) ();
+#endif
/* Extract handler.
- OD is an opcode table descriptor.
+ CD is a cpu table descriptor.
INSN is a pointer to a struct describing the insn being parsed.
The second argument is a pointer to a struct controlling extraction
(only used for variable length insns).
- BUF_CTRL is a pointer to a struct for controlling reading of further
+ EX_INFO is a pointer to a struct for controlling reading of further
bytes for the insn.
- BASE_INSN is the first CGEN_BASE_INSN_SIZE bytes.
+ BASE_INSN is the first CGEN_BASE_INSN_SIZE bytes (host order).
FIELDS is a pointer to a cgen_fields struct in which the results are placed.
PC is the pc value of the insn.
The result is the length of the insn in bits or zero if not recognized. */
+
+#ifdef __BFD_H_SEEN__
typedef int (cgen_extract_fn)
- PARAMS ((CGEN_OPCODE_DESC, const CGEN_INSN * /*insn*/,
- PTR /*buf_ctrl*/, unsigned long /*base_insn*/,
- CGEN_FIELDS * /*fields*/, bfd_vma /*pc*/));
+ (CGEN_CPU_DESC, const CGEN_INSN *insn_,
+ CGEN_EXTRACT_INFO *ex_info_, CGEN_INSN_INT base_insn_,
+ CGEN_FIELDS *fields_, bfd_vma pc_);
+#else
+typedef int (cgen_extract_fn) ();
+#endif
/* Print handler.
- OD is an opcode table descriptor.
+ CD is a cpu table descriptor.
INFO is a pointer to the disassembly info.
Eg: disassemble_info. It's defined as `PTR' so this file can be included
without dis-asm.h.
FIELDS is a pointer to a cgen_fields struct.
PC is the pc value of the insn.
LEN is the length of the insn, in bits. */
+
+#ifdef __BFD_H_SEEN__
typedef void (cgen_print_fn)
- PARAMS ((CGEN_OPCODE_DESC /*od*/, PTR /*info*/,
- const CGEN_INSN * /*insn*/,
- CGEN_FIELDS * /*fields*/, bfd_vma /*pc*/, int /*len*/));
-
-/* The `parse' and `insert' fields are indices into these tables.
- The elements are pointer to specialized handler functions.
- Element 0 is special, it means use the default handler. */
-extern cgen_parse_fn * const CGEN_SYM (parse_handlers) [];
-#define CGEN_PARSE_FN(x) (CGEN_SYM (parse_handlers)[(x)->base.parse])
-extern cgen_insert_fn * const CGEN_SYM (insert_handlers) [];
-#define CGEN_INSERT_FN(x) (CGEN_SYM (insert_handlers)[(x)->base.insert])
-
-/* Likewise for the `extract' and `print' fields. */
-extern cgen_extract_fn * const CGEN_SYM (extract_handlers) [];
-#define CGEN_EXTRACT_FN(x) (CGEN_SYM (extract_handlers)[(x)->base.extract])
-extern cgen_print_fn * const CGEN_SYM (print_handlers) [];
-#define CGEN_PRINT_FN(x) (CGEN_SYM (print_handlers)[(x)->base.print])
-
-/* Default insn parser, printer. */
-extern cgen_parse_fn CGEN_SYM (parse_insn);
-extern cgen_insert_fn CGEN_SYM (insert_insn);
-extern cgen_extract_fn CGEN_SYM (extract_insn);
-extern cgen_print_fn CGEN_SYM (print_insn);
-
-#endif /* BFD_VERSION */
-\f
-/* Base class of parser/printer.
- (Don't read too much into the use of the phrase "base class".
- It's a name I'm using to organize my thoughts.)
+ (CGEN_CPU_DESC, void * info_, const CGEN_INSN *insn_,
+ CGEN_FIELDS *fields_, bfd_vma pc_, int len_);
+#else
+typedef void (cgen_print_fn) ();
+#endif
- Instructions and expressions all share this data in common.
- It's a collection of the common elements needed to parse, insert, extract,
- and print each of them.
- This is an underutilized facility, and exists as a potential escape hatch
- for handling more complicated assembler syntaxes. */
+/* Parse/insert/extract/print handlers.
-struct cgen_base
+ Indices into the handler tables.
+ We could use pointers here instead, but 90% of them are generally identical
+ and that's a lot of redundant data. Making these unsigned char indices
+ into tables of pointers saves a bit of space.
+ Using indices also keeps assembler code out of the disassembler and
+ vice versa. */
+
+struct cgen_opcode_handler
{
- /* Indices into the handler tables.
- We could use pointers here instead, but in the case of the insn table,
- 90% of them would be identical and that's a lot of redundant data.
- 0 means use the default (what the default is is up to the code).
- Using indices also keeps assembler code out of the disassembler and
- vice versa. */
unsigned char parse, insert, extract, print;
};
\f
Not that one would necessarily want to do that but rather that it helps
keep a clean interface. The interface will obviously be slanted towards
GAS, but at least it's a start.
- ??? Note that one possible use of the assembler besides GAS is GDB.
+ ??? Note that one possible user of the assembler besides GAS is GDB.
Parsing is controlled by the assembler which calls
CGEN_SYM (assemble_insn). If it can parse and build the entire insn
The parsed value is stored in the bfd_vma *. */
/* Values for indicating what the caller wants. */
+
enum cgen_parse_operand_type
{
CGEN_PARSE_OPERAND_INIT,
CGEN_PARSE_OPERAND_INTEGER,
- CGEN_PARSE_OPERAND_ADDRESS
+ CGEN_PARSE_OPERAND_ADDRESS,
+ CGEN_PARSE_OPERAND_SYMBOLIC
};
/* Values for indicating what was parsed. */
+
enum cgen_parse_operand_result
{
CGEN_PARSE_OPERAND_RESULT_NUMBER,
CGEN_PARSE_OPERAND_RESULT_ERROR
};
-#ifdef BFD_VERSION /* Don't require bfd.h unnecessarily. */
+#ifdef __BFD_H_SEEN__ /* Don't require bfd.h unnecessarily. */
typedef const char * (cgen_parse_operand_fn)
- PARAMS ((CGEN_OPCODE_DESC,
- enum cgen_parse_operand_type, const char **, int, int,
- enum cgen_parse_operand_result *, bfd_vma *));
+ (CGEN_CPU_DESC,
+ enum cgen_parse_operand_type, const char **, int, int,
+ enum cgen_parse_operand_result *, bfd_vma *);
#else
typedef const char * (cgen_parse_operand_fn) ();
#endif
/* Set the cgen_parse_operand_fn callback. */
+
extern void cgen_set_parse_operand_fn
- PARAMS ((CGEN_OPCODE_DESC, cgen_parse_operand_fn));
+ (CGEN_CPU_DESC, cgen_parse_operand_fn);
/* Called before trying to match a table entry with the insn. */
-extern void cgen_init_parse_operand PARAMS ((CGEN_OPCODE_DESC));
+
+extern void cgen_init_parse_operand (CGEN_CPU_DESC);
\f
/* Operand values (keywords, integers, symbols, etc.) */
enum cgen_asm_type
{
- CGEN_ASM_KEYWORD, CGEN_ASM_MAX
+ CGEN_ASM_NONE, CGEN_ASM_KEYWORD, CGEN_ASM_MAX
};
+#ifndef CGEN_ARCH
+enum cgen_hw_type { CGEN_HW_MAX };
+#endif
+
/* List of hardware elements. */
-typedef struct cgen_hw_entry
+typedef struct
{
- /* The type of this entry, one of `enum hw_type'.
- This is an int and not the enum as the latter may not be declared yet. */
- int type;
- const struct cgen_hw_entry * next;
- char * name;
+ char *name;
+ enum cgen_hw_type type;
+ /* There is currently no example where both index specs and value specs
+ are required, so for now both are clumped under "asm_data". */
enum cgen_asm_type asm_type;
- PTR asm_data;
+ void *asm_data;
+#ifndef CGEN_HW_NBOOL_ATTRS
+#define CGEN_HW_NBOOL_ATTRS 1
+#endif
+ CGEN_ATTR_TYPE (CGEN_HW_NBOOL_ATTRS) attrs;
+#define CGEN_HW_ATTRS(hw) (&(hw)->attrs)
} CGEN_HW_ENTRY;
+/* Return value of attribute ATTR in HW. */
+
+#define CGEN_HW_ATTR_VALUE(hw, attr) \
+CGEN_ATTR_VALUE ((hw), CGEN_HW_ATTRS (hw), (attr))
+
+/* Table of hardware elements for selected mach, computed at runtime.
+ enum cgen_hw_type is an index into this table (specifically `entries'). */
+
+typedef struct {
+ /* Pointer to null terminated table of all compiled in entries. */
+ const CGEN_HW_ENTRY *init_entries;
+ unsigned int entry_size; /* since the attribute member is variable sized */
+ /* Array of all entries, initial and run-time added. */
+ const CGEN_HW_ENTRY **entries;
+ /* Number of elements in `entries'. */
+ unsigned int num_entries;
+ /* For now, xrealloc is called each time a new entry is added at runtime.
+ ??? May wish to keep track of some slop to reduce the number of calls to
+ xrealloc, except that there's unlikely to be many and not expected to be
+ in speed critical code. */
+} CGEN_HW_TABLE;
+
extern const CGEN_HW_ENTRY * cgen_hw_lookup_by_name
- PARAMS ((CGEN_OPCODE_DESC, const char *));
+ (CGEN_CPU_DESC, const char *);
extern const CGEN_HW_ENTRY * cgen_hw_lookup_by_num
- PARAMS ((CGEN_OPCODE_DESC, int));
+ (CGEN_CPU_DESC, unsigned int);
/* This struct is used to describe things like register names, etc. */
This should, but technically needn't, appear last. It is a variable sized
array in that one architecture may have 1 nonbool attribute and another
may have more. Having this last means the non-architecture specific code
- needn't care. */
+ needn't care. The goal is to eventually record
+ attributes in their raw form, evaluate them at run-time, and cache the
+ values, so this worry will go away anyway. */
/* ??? Moving this last should be done by treating keywords like insn lists
and moving the `next' fields into a CGEN_KEYWORD_LIST struct. */
/* FIXME: Not used yet. */
#ifndef CGEN_KEYWORD_NBOOL_ATTRS
#define CGEN_KEYWORD_NBOOL_ATTRS 1
#endif
- const CGEN_ATTR_TYPE (CGEN_KEYWORD_NBOOL_ATTRS) attrs;
+ CGEN_ATTR_TYPE (CGEN_KEYWORD_NBOOL_ATTRS) attrs;
+ /* ??? Putting these here means compiled in entries can't be const.
+ Not a really big deal, but something to consider. */
/* Next name hash table entry. */
struct cgen_keyword_entry *next_name;
/* Next value hash table entry. */
/* Top level struct for describing a set of related keywords
(e.g. register names).
- This struct supports runtime entry of new values, and hashed lookups. */
+ This struct supports run-time entry of new values, and hashed lookups. */
typedef struct cgen_keyword
{
/* Pointer to initial [compiled in] values. */
- CGEN_KEYWORD_ENTRY * init_entries;
+ CGEN_KEYWORD_ENTRY *init_entries;
/* Number of entries in `init_entries'. */
unsigned int num_init_entries;
/* Hash table used for name lookup. */
- CGEN_KEYWORD_ENTRY ** name_hash_table;
+ CGEN_KEYWORD_ENTRY **name_hash_table;
/* Hash table used for value lookup. */
- CGEN_KEYWORD_ENTRY ** value_hash_table;
+ CGEN_KEYWORD_ENTRY **value_hash_table;
/* Number of entries in the hash_tables. */
unsigned int hash_table_size;
/* Pointer to null keyword "" entry if present. */
- const CGEN_KEYWORD_ENTRY * null_entry;
+ const CGEN_KEYWORD_ENTRY *null_entry;
+
+ /* String containing non-alphanumeric characters used
+ in keywords.
+ At present, the highest number of entries used is 1. */
+ char nonalpha_chars[8];
} CGEN_KEYWORD;
/* Structure used for searching. */
typedef struct
{
/* Table being searched. */
- const CGEN_KEYWORD * table;
+ const CGEN_KEYWORD *table;
/* Specification of what is being searched for. */
- const char * spec;
+ const char *spec;
/* Current index in hash table. */
unsigned int current_hash;
/* Current element in current hash chain. */
- CGEN_KEYWORD_ENTRY * current_entry;
+ CGEN_KEYWORD_ENTRY *current_entry;
} CGEN_KEYWORD_SEARCH;
/* Lookup a keyword from its name. */
-const CGEN_KEYWORD_ENTRY * cgen_keyword_lookup_name
- PARAMS ((CGEN_KEYWORD *, const char *));
+
+const CGEN_KEYWORD_ENTRY *cgen_keyword_lookup_name
+ (CGEN_KEYWORD *, const char *);
+
/* Lookup a keyword from its value. */
-const CGEN_KEYWORD_ENTRY * cgen_keyword_lookup_value
- PARAMS ((CGEN_KEYWORD *, int));
+
+const CGEN_KEYWORD_ENTRY *cgen_keyword_lookup_value
+ (CGEN_KEYWORD *, int);
+
/* Add a keyword. */
-void cgen_keyword_add PARAMS ((CGEN_KEYWORD *, CGEN_KEYWORD_ENTRY *));
+
+void cgen_keyword_add (CGEN_KEYWORD *, CGEN_KEYWORD_ENTRY *);
+
/* Keyword searching.
This can be used to retrieve every keyword, or a subset. */
+
CGEN_KEYWORD_SEARCH cgen_keyword_search_init
- PARAMS ((CGEN_KEYWORD *, const char *));
+ (CGEN_KEYWORD *, const char *);
const CGEN_KEYWORD_ENTRY *cgen_keyword_search_next
- PARAMS ((CGEN_KEYWORD_SEARCH *));
+ (CGEN_KEYWORD_SEARCH *);
/* Operand value support routines. */
-extern const char * cgen_parse_keyword
- PARAMS ((CGEN_OPCODE_DESC, const char **, CGEN_KEYWORD *, long *));
-#ifdef BFD_VERSION /* Don't require bfd.h unnecessarily. */
-extern const char * cgen_parse_signed_integer
- PARAMS ((CGEN_OPCODE_DESC, const char **, int, long *));
-extern const char * cgen_parse_unsigned_integer
- PARAMS ((CGEN_OPCODE_DESC, const char **, int, unsigned long *));
-extern const char * cgen_parse_address
- PARAMS ((CGEN_OPCODE_DESC, const char **, int, int,
- enum cgen_parse_operand_result *, bfd_vma *));
-extern const char * cgen_validate_signed_integer
- PARAMS ((long, long, long));
-extern const char * cgen_validate_unsigned_integer
- PARAMS ((unsigned long, unsigned long, unsigned long));
+extern const char *cgen_parse_keyword
+ (CGEN_CPU_DESC, const char **, CGEN_KEYWORD *, long *);
+#ifdef __BFD_H_SEEN__ /* Don't require bfd.h unnecessarily. */
+extern const char *cgen_parse_signed_integer
+ (CGEN_CPU_DESC, const char **, int, long *);
+extern const char *cgen_parse_unsigned_integer
+ (CGEN_CPU_DESC, const char **, int, unsigned long *);
+extern const char *cgen_parse_address
+ (CGEN_CPU_DESC, const char **, int, int,
+ enum cgen_parse_operand_result *, bfd_vma *);
+extern const char *cgen_validate_signed_integer
+ (long, long, long);
+extern const char *cgen_validate_unsigned_integer
+ (unsigned long, unsigned long, unsigned long);
#endif
\f
/* Operand modes. */
to <arch>-opc.h, or add a hook. */
enum cgen_mode {
- CGEN_MODE_VOID, /* FIXME: rename simulator's VM to VOID */
+ CGEN_MODE_VOID, /* ??? rename simulator's VM to VOID? */
CGEN_MODE_BI, CGEN_MODE_QI, CGEN_MODE_HI, CGEN_MODE_SI, CGEN_MODE_DI,
CGEN_MODE_UBI, CGEN_MODE_UQI, CGEN_MODE_UHI, CGEN_MODE_USI, CGEN_MODE_UDI,
CGEN_MODE_SF, CGEN_MODE_DF, CGEN_MODE_XF, CGEN_MODE_TF,
+ CGEN_MODE_TARGET_MAX,
+ CGEN_MODE_INT, CGEN_MODE_UINT,
CGEN_MODE_MAX
};
/* FIXME: Until simulator is updated. */
+
#define CGEN_MODE_VM CGEN_MODE_VOID
\f
+/* Operands. */
+
+#ifndef CGEN_ARCH
+enum cgen_operand_type { CGEN_OPERAND_MAX };
+#endif
+
+/* "nil" indicator for the operand instance table */
+#define CGEN_OPERAND_NIL CGEN_OPERAND_MAX
+
+/* A tree of these structs represents the multi-ifield
+ structure of an operand's hw-index value, if it exists. */
+
+struct cgen_ifld;
+
+typedef struct cgen_maybe_multi_ifield
+{
+ int count; /* 0: indexed by single cgen_ifld (possibly null: dead entry);
+ n: indexed by array of more cgen_maybe_multi_ifields. */
+ union
+ {
+ const void *p;
+ const struct cgen_maybe_multi_ifield * multi;
+ const struct cgen_ifld * leaf;
+ } val;
+}
+CGEN_MAYBE_MULTI_IFLD;
+
/* This struct defines each entry in the operand table. */
-typedef struct cgen_operand
+typedef struct
{
/* Name as it appears in the syntax string. */
- char * name;
+ char *name;
+
+ /* Operand type. */
+ enum cgen_operand_type type;
/* The hardware element associated with this operand. */
- const CGEN_HW_ENTRY *hw;
+ enum cgen_hw_type hw_type;
/* FIXME: We don't yet record ifield definitions, which we should.
When we do it might make sense to delete start/length (since they will
be duplicated in the ifield's definition) and replace them with a
- pointer to the ifield entry. Note that as more complicated situations
- need to be handled, going more and more with an OOP paradigm will help
- keep the complication under control. Of course, this was the goal from
- the start, but getting there in one step was too much too soon. */
+ pointer to the ifield entry. */
- /* Bit position (msb of first byte = bit 0).
+ /* Bit position.
This is just a hint, and may be unused in more complex operands.
May be unused for a modifier. */
unsigned char start;
May be unused for a modifier. */
unsigned char length;
+ /* The (possibly-multi) ifield used as an index for this operand, if it
+ is indexed by a field at all. This substitutes / extends the start and
+ length fields above, but unsure at this time whether they are used
+ anywhere. */
+ CGEN_MAYBE_MULTI_IFLD index_fields;
#if 0 /* ??? Interesting idea but relocs tend to get too complicated,
and ABI dependent, for simple table lookups to work. */
/* Ideally this would be the internal (external?) reloc type. */
This should, but technically needn't, appear last. It is a variable sized
array in that one architecture may have 1 nonbool attribute and another
may have more. Having this last means the non-architecture specific code
- needn't care, now or tomorrow. */
+ needn't care, now or tomorrow. The goal is to eventually record
+ attributes in their raw form, evaluate them at run-time, and cache the
+ values, so this worry will go away anyway. */
#ifndef CGEN_OPERAND_NBOOL_ATTRS
#define CGEN_OPERAND_NBOOL_ATTRS 1
#endif
- const CGEN_ATTR_TYPE (CGEN_OPERAND_NBOOL_ATTRS) attrs;
+ CGEN_ATTR_TYPE (CGEN_OPERAND_NBOOL_ATTRS) attrs;
#define CGEN_OPERAND_ATTRS(operand) (&(operand)->attrs)
} CGEN_OPERAND;
/* Return value of attribute ATTR in OPERAND. */
-#define CGEN_OPERAND_ATTR(operand, attr) \
-CGEN_ATTR_VALUE (operand, CGEN_OPERAND_ATTRS (operand), attr)
-
-/* The operand table is currently a very static entity. */
-extern const CGEN_OPERAND CGEN_SYM (operand_table)[];
-
-enum cgen_operand_type;
-#define CGEN_OPERAND_INDEX(operand) ((int) ((operand) - CGEN_SYM (operand_table)))
-/* FIXME: Rename, cpu-opc.h defines this as the typedef of the enum. */
-#define CGEN_OPERAND_TYPE(operand) ((enum cgen_operand_type) CGEN_OPERAND_INDEX (operand))
-#define CGEN_OPERAND_ENTRY(n) (& CGEN_SYM (operand_table) [n])
+#define CGEN_OPERAND_ATTR_VALUE(operand, attr) \
+CGEN_ATTR_VALUE ((operand), CGEN_OPERAND_ATTRS (operand), (attr))
+
+/* Table of operands for selected mach/isa, computed at runtime.
+ enum cgen_operand_type is an index into this table (specifically
+ `entries'). */
+
+typedef struct {
+ /* Pointer to null terminated table of all compiled in entries. */
+ const CGEN_OPERAND *init_entries;
+ unsigned int entry_size; /* since the attribute member is variable sized */
+ /* Array of all entries, initial and run-time added. */
+ const CGEN_OPERAND **entries;
+ /* Number of elements in `entries'. */
+ unsigned int num_entries;
+ /* For now, xrealloc is called each time a new entry is added at runtime.
+ ??? May wish to keep track of some slop to reduce the number of calls to
+ xrealloc, except that there's unlikely to be many and not expected to be
+ in speed critical code. */
+} CGEN_OPERAND_TABLE;
+
+extern const CGEN_OPERAND * cgen_operand_lookup_by_name
+ (CGEN_CPU_DESC, const char *);
+extern const CGEN_OPERAND * cgen_operand_lookup_by_num
+ (CGEN_CPU_DESC, int);
\f
/* Instruction operand instances.
written are recorded. */
/* The type of the instance. */
-enum cgen_operand_instance_type {
+
+enum cgen_opinst_type {
/* End of table marker. */
- CGEN_OPERAND_INSTANCE_END = 0,
- CGEN_OPERAND_INSTANCE_INPUT, CGEN_OPERAND_INSTANCE_OUTPUT
+ CGEN_OPINST_END = 0,
+ CGEN_OPINST_INPUT, CGEN_OPINST_OUTPUT
};
typedef struct
{
- /* The type of this operand. */
- enum cgen_operand_instance_type type;
-#define CGEN_OPERAND_INSTANCE_TYPE(opinst) ((opinst)->type)
+ /* Input or output indicator. */
+ enum cgen_opinst_type type;
+
+ /* Name of operand. */
+ const char *name;
/* The hardware element referenced. */
- const CGEN_HW_ENTRY *hw;
-#define CGEN_OPERAND_INSTANCE_HW(opinst) ((opinst)->hw)
+ enum cgen_hw_type hw_type;
/* The mode in which the operand is being used. */
enum cgen_mode mode;
-#define CGEN_OPERAND_INSTANCE_MODE(opinst) ((opinst)->mode)
- /* The operand table entry or NULL if there is none (i.e. an explicit
- hardware reference). */
- const CGEN_OPERAND *operand;
-#define CGEN_OPERAND_INSTANCE_OPERAND(opinst) ((opinst)->operand)
+ /* The operand table entry CGEN_OPERAND_NIL if there is none
+ (i.e. an explicit hardware reference). */
+ enum cgen_operand_type op_type;
- /* If `operand' is NULL, the index (e.g. into array of registers). */
+ /* If `operand' is "nil", the index (e.g. into array of registers). */
int index;
-#define CGEN_OPERAND_INSTANCE_INDEX(opinst) ((opinst)->index)
-} CGEN_OPERAND_INSTANCE;
+
+ /* Attributes.
+ ??? This perhaps should be a real attribute struct but there's
+ no current need, so we save a bit of space and just have a set of
+ flags. The interface is such that this can easily be made attributes
+ should it prove useful. */
+ unsigned int attrs;
+#define CGEN_OPINST_ATTRS(opinst) ((opinst)->attrs)
+/* Return value of attribute ATTR in OPINST. */
+#define CGEN_OPINST_ATTR(opinst, attr) \
+((CGEN_OPINST_ATTRS (opinst) & (attr)) != 0)
+/* Operand is conditionally referenced (read/written). */
+#define CGEN_OPINST_COND_REF 1
+} CGEN_OPINST;
\f
/* Syntax string.
into the operand table. The operand table doesn't exist in C, per se, as
the data is recorded in the parse/insert/extract/print switch statements. */
-#ifndef CGEN_MAX_SYNTAX_BYTES
-#define CGEN_MAX_SYNTAX_BYTES 16
+/* This should be at least as large as necessary for any target. */
+#define CGEN_MAX_SYNTAX_ELEMENTS 48
+
+/* A target may know its own precise maximum. Assert that it falls below
+ the above limit. */
+#ifdef CGEN_ACTUAL_MAX_SYNTAX_ELEMENTS
+#if CGEN_ACTUAL_MAX_SYNTAX_ELEMENTS > CGEN_MAX_SYNTAX_ELEMENTS
+#error "CGEN_ACTUAL_MAX_SYNTAX_ELEMENTS too high - enlarge CGEN_MAX_SYNTAX_ELEMENTS"
#endif
+#endif
+
+typedef unsigned short CGEN_SYNTAX_CHAR_TYPE;
typedef struct
{
- unsigned char syntax[CGEN_MAX_SYNTAX_BYTES];
+ CGEN_SYNTAX_CHAR_TYPE syntax[CGEN_MAX_SYNTAX_ELEMENTS];
} CGEN_SYNTAX;
#define CGEN_SYNTAX_STRING(syn) (syn->syntax)
#define CGEN_SYNTAX_CHAR_P(c) ((c) < 128)
-#define CGEN_SYNTAX_CHAR(c) (c)
+#define CGEN_SYNTAX_CHAR(c) ((unsigned char)c)
#define CGEN_SYNTAX_FIELD(c) ((c) - 128)
#define CGEN_SYNTAX_MAKE_FIELD(c) ((c) + 128)
However, we treat mnemonics as just another operand of the instruction.
A value of 1 means "this is where the mnemonic appears". 1 isn't
special other than it's a non-printable ASCII char. */
+
#define CGEN_SYNTAX_MNEMONIC 1
#define CGEN_SYNTAX_MNEMONIC_P(ch) ((ch) == CGEN_SYNTAX_MNEMONIC)
\f
+/* Instruction fields.
+
+ ??? We currently don't allow adding fields at run-time.
+ Easy to fix when needed. */
+
+typedef struct cgen_ifld {
+ /* Enum of ifield. */
+ int num;
+#define CGEN_IFLD_NUM(f) ((f)->num)
+
+ /* Name of the field, distinguishes it from all other fields. */
+ const char *name;
+#define CGEN_IFLD_NAME(f) ((f)->name)
+
+ /* Default offset, in bits, from the start of the insn to the word
+ containing the field. */
+ int word_offset;
+#define CGEN_IFLD_WORD_OFFSET(f) ((f)->word_offset)
+
+ /* Default length of the word containing the field. */
+ int word_size;
+#define CGEN_IFLD_WORD_SIZE(f) ((f)->word_size)
+
+ /* Default starting bit number.
+ Whether lsb=0 or msb=0 is determined by CGEN_INSN_LSB0_P. */
+ int start;
+#define CGEN_IFLD_START(f) ((f)->start)
+
+ /* Length of the field, in bits. */
+ int length;
+#define CGEN_IFLD_LENGTH(f) ((f)->length)
+
+#ifndef CGEN_IFLD_NBOOL_ATTRS
+#define CGEN_IFLD_NBOOL_ATTRS 1
+#endif
+ CGEN_ATTR_TYPE (CGEN_IFLD_NBOOL_ATTRS) attrs;
+#define CGEN_IFLD_ATTRS(f) (&(f)->attrs)
+} CGEN_IFLD;
+
+/* Return value of attribute ATTR in IFLD. */
+#define CGEN_IFLD_ATTR_VALUE(ifld, attr) \
+CGEN_ATTR_VALUE ((ifld), CGEN_IFLD_ATTRS (ifld), (attr))
+\f
+/* Instruction data. */
+
/* Instruction formats.
Instructions are grouped by format. Associated with an instruction is its
- format. Each opcode table entry contains a format table entry.
+ format. Each insn's opcode table entry contains a format table entry.
??? There is usually very few formats compared with the number of insns,
so one can reduce the size of the opcode table by recording the format table
as a separate entity. Given that we currently don't, format table entries
??? Support for variable length ISA's is wip. */
+/* Accompanying each iformat description is a list of its fields. */
+
+typedef struct {
+ const CGEN_IFLD *ifld;
+#define CGEN_IFMT_IFLD_IFLD(ii) ((ii)->ifld)
+} CGEN_IFMT_IFLD;
+
+/* This should be at least as large as necessary for any target. */
+#define CGEN_MAX_IFMT_OPERANDS 16
+
+/* A target may know its own precise maximum. Assert that it falls below
+ the above limit. */
+#ifdef CGEN_ACTUAL_MAX_IFMT_OPERANDS
+#if CGEN_ACTUAL_MAX_IFMT_OPERANDS > CGEN_MAX_IFMT_OPERANDS
+#error "CGEN_ACTUAL_MAX_IFMT_OPERANDS too high - enlarge CGEN_MAX_IFMT_OPERANDS"
+#endif
+#endif
+
+
typedef struct
{
/* Length that MASK and VALUE have been calculated to
[VALUE is recorded elsewhere].
- Normally it is CGEN_BASE_INSN_BITSIZE. On [V]LIW architectures where
- the base insn size may be larger than the size of an insn, this field is
- less than CGEN_BASE_INSN_BITSIZE. */
+ Normally it is base_insn_bitsize. On [V]LIW architectures where the base
+ insn size may be larger than the size of an insn, this field is less than
+ base_insn_bitsize. */
unsigned char mask_length;
+#define CGEN_IFMT_MASK_LENGTH(ifmt) ((ifmt)->mask_length)
/* Total length of instruction, in bits. */
unsigned char length;
+#define CGEN_IFMT_LENGTH(ifmt) ((ifmt)->length)
/* Mask to apply to the first MASK_LENGTH bits.
Each insn's value is stored with the insn.
The first step in recognizing an insn for disassembly is
(opcode & mask) == value. */
- unsigned int mask;
-} CGEN_FORMAT;
-\f
-/* This struct defines each entry in the instruction table. */
+ CGEN_INSN_INT mask;
+#define CGEN_IFMT_MASK(ifmt) ((ifmt)->mask)
-struct cgen_insn
+ /* Instruction fields.
+ +1 for trailing NULL. */
+ CGEN_IFMT_IFLD iflds[CGEN_MAX_IFMT_OPERANDS + 1];
+#define CGEN_IFMT_IFLDS(ifmt) ((ifmt)->iflds)
+} CGEN_IFMT;
+
+/* Instruction values. */
+
+typedef struct
{
- /* This field is an array of functions that operand on this entry. */
- struct cgen_base base;
-#define CGEN_INSN_BASE(insn) (&(insn)->base)
+ /* The opcode portion of the base insn. */
+ CGEN_INSN_INT base_value;
- /* Each real instruction is enumerated.
- The simulator use to use this value but currently no longer does.
- This may go away in time. */
- int num;
-#define CGEN_INSN_NUM(insn) ((insn)->num)
+#ifdef CGEN_MAX_EXTRA_OPCODE_OPERANDS
+ /* Extra opcode values beyond base_value. */
+ unsigned long ifield_values[CGEN_MAX_EXTRA_OPCODE_OPERANDS];
+#endif
+} CGEN_IVALUE;
- /* Name of entry (that distinguishes it from all other entries).
- This is used, for example, in simulator profiling results. */
- /* ??? If mnemonics have operands, try to print full mnemonic. */
- const char * name;
-#define CGEN_INSN_NAME(insn) ((insn)->name)
+/* Instruction opcode table.
+ This contains the syntax and format data of an instruction. */
- /* Mnemonic. This is used when parsing and printing the insn.
- In the case of insns that have operands on the mnemonics, this is
- only the constant part. E.g. for conditional execution of an `add' insn,
- where the full mnemonic is addeq, addne, etc., this is only "add". */
- const char * mnemonic;
-#define CGEN_INSN_MNEMONIC(insn) ((insn)->mnemonic)
+/* ??? Some ports already have an opcode table yet still need to use the rest
+ of what cgen_insn has. Plus keeping the opcode data with the operand
+ instance data can create a pretty big file. So we keep them separately.
+ Not sure this is a good idea in the long run. */
+
+typedef struct
+{
+ /* Indices into parse/insert/extract/print handler tables. */
+ struct cgen_opcode_handler handlers;
+#define CGEN_OPCODE_HANDLERS(opc) (& (opc)->handlers)
/* Syntax string. */
- const CGEN_SYNTAX syntax;
-#define CGEN_INSN_SYNTAX(insn) (& (insn)->syntax)
+ CGEN_SYNTAX syntax;
+#define CGEN_OPCODE_SYNTAX(opc) (& (opc)->syntax)
/* Format entry. */
- const CGEN_FORMAT format;
-#define CGEN_INSN_MASK_BITSIZE(insn) ((insn)->format.mask_length)
-#define CGEN_INSN_BITSIZE(insn) ((insn)->format.length)
+ const CGEN_IFMT *format;
+#define CGEN_OPCODE_FORMAT(opc) ((opc)->format)
+#define CGEN_OPCODE_MASK_BITSIZE(opc) CGEN_IFMT_MASK_LENGTH (CGEN_OPCODE_FORMAT (opc))
+#define CGEN_OPCODE_BITSIZE(opc) CGEN_IFMT_LENGTH (CGEN_OPCODE_FORMAT (opc))
+#define CGEN_OPCODE_IFLDS(opc) CGEN_IFMT_IFLDS (CGEN_OPCODE_FORMAT (opc))
/* Instruction opcode value. */
- unsigned int value;
-#define CGEN_INSN_VALUE(insn) ((insn)->value)
-#define CGEN_INSN_MASK(insn) ((insn)->format.mask)
-
- /* Semantics, as CDL. */
- /* ??? Note that the operand instance table could be computed at runtime
- if we parse this and cache the results. */
- const char *cdx;
-#define CGEN_INSN_CDX(insn) ((insn)->cdx)
-
- /* Opaque pointer to "subclass" specific data.
- In the case of real insns this points to a NULL entry terminated
- table of operands used, or NULL if none.
- In the case of macro insns this points to data to control the expansion.
- ??? I'd rather not get carried away and lay things out with pedantic
- purity right now. Sure, other fields might better be tucked away in
- `data'. Not now. */
- PTR data;
-#define CGEN_INSN_DATA(insn) ((insn)->data)
-#define CGEN_INSN_OPERANDS(insn) ((CGEN_OPERAND_INSTANCE *) (insn)->data)
+ CGEN_IVALUE value;
+#define CGEN_OPCODE_VALUE(opc) (& (opc)->value)
+#define CGEN_OPCODE_BASE_VALUE(opc) (CGEN_OPCODE_VALUE (opc)->base_value)
+#define CGEN_OPCODE_BASE_MASK(opc) CGEN_IFMT_MASK (CGEN_OPCODE_FORMAT (opc))
+} CGEN_OPCODE;
+
+/* Instruction attributes.
+ This is made a published type as applications can cache a pointer to
+ the attributes for speed. */
+
+#ifndef CGEN_INSN_NBOOL_ATTRS
+#define CGEN_INSN_NBOOL_ATTRS 1
+#endif
+typedef CGEN_ATTR_TYPE (CGEN_INSN_NBOOL_ATTRS) CGEN_INSN_ATTR_TYPE;
+
+/* Enum of architecture independent attributes. */
+
+#ifndef CGEN_ARCH
+/* ??? Numbers here are recorded in two places. */
+typedef enum cgen_insn_attr {
+ CGEN_INSN_ALIAS = 0
+} CGEN_INSN_ATTR;
+#define CGEN_ATTR_CGEN_INSN_ALIAS_VALUE(attrs) ((attrs)->bool_ & (1 << CGEN_INSN_ALIAS))
+#endif
+
+/* This struct defines each entry in the instruction table. */
+
+typedef struct
+{
+ /* Each real instruction is enumerated. */
+ /* ??? This may go away in time. */
+ int num;
+#define CGEN_INSN_NUM(insn) ((insn)->base->num)
+
+ /* Name of entry (that distinguishes it from all other entries). */
+ /* ??? If mnemonics have operands, try to print full mnemonic. */
+ const char *name;
+#define CGEN_INSN_NAME(insn) ((insn)->base->name)
+
+ /* Mnemonic. This is used when parsing and printing the insn.
+ In the case of insns that have operands on the mnemonics, this is
+ only the constant part. E.g. for conditional execution of an `add' insn,
+ where the full mnemonic is addeq, addne, etc., and the condition is
+ treated as an operand, this is only "add". */
+ const char *mnemonic;
+#define CGEN_INSN_MNEMONIC(insn) ((insn)->base->mnemonic)
+
+ /* Total length of instruction, in bits. */
+ int bitsize;
+#define CGEN_INSN_BITSIZE(insn) ((insn)->base->bitsize)
+
+#if 0 /* ??? Disabled for now as there is a problem with embedded newlines
+ and the table is already pretty big. Should perhaps be moved
+ to a file of its own. */
+ /* Semantics, as RTL. */
+ /* ??? Plain text or bytecodes? */
+ /* ??? Note that the operand instance table could be computed at run-time
+ if we parse this and cache the results. Something to eventually do. */
+ const char *rtx;
+#define CGEN_INSN_RTX(insn) ((insn)->base->rtx)
+#endif
/* Attributes.
This must appear last. It is a variable sized array in that one
architecture may have 1 nonbool attribute and another may have more.
Having this last means the non-architecture specific code needn't
- care. */
-#ifndef CGEN_INSN_NBOOL_ATTRS
-#define CGEN_INSN_NBOOL_ATTRS 1
-#endif
- const CGEN_ATTR_TYPE (CGEN_INSN_NBOOL_ATTRS) attrs;
-#define CGEN_INSN_ATTRS(insn) (&(insn)->attrs)
+ care. The goal is to eventually record attributes in their raw form,
+ evaluate them at run-time, and cache the values, so this worry will go
+ away anyway. */
+ CGEN_INSN_ATTR_TYPE attrs;
+#define CGEN_INSN_ATTRS(insn) (&(insn)->base->attrs)
/* Return value of attribute ATTR in INSN. */
-#define CGEN_INSN_ATTR(insn, attr) \
-CGEN_ATTR_VALUE (insn, CGEN_INSN_ATTRS (insn), attr)
+#define CGEN_INSN_ATTR_VALUE(insn, attr) \
+CGEN_ATTR_VALUE ((insn), CGEN_INSN_ATTRS (insn), (attr))
+#define CGEN_INSN_BITSET_ATTR_VALUE(insn, attr) \
+ CGEN_BITSET_ATTR_VALUE ((insn), CGEN_INSN_ATTRS (insn), (attr))
+} CGEN_IBASE;
+
+/* Return non-zero if INSN is the "invalid" insn marker. */
+
+#define CGEN_INSN_INVALID_P(insn) (CGEN_INSN_MNEMONIC (insn) == 0)
+
+/* Main struct contain instruction information.
+ BASE is always present, the rest is present only if asked for. */
+
+struct cgen_insn
+{
+ /* ??? May be of use to put a type indicator here.
+ Then this struct could different info for different classes of insns. */
+ /* ??? A speedup can be had by moving `base' into this struct.
+ Maybe later. */
+ const CGEN_IBASE *base;
+ const CGEN_OPCODE *opcode;
+ const CGEN_OPINST *opinst;
+
+ /* Regex to disambiguate overloaded opcodes */
+ void *rx;
+#define CGEN_INSN_RX(insn) ((insn)->rx)
+#define CGEN_MAX_RX_ELEMENTS (CGEN_MAX_SYNTAX_ELEMENTS * 5)
};
/* Instruction lists.
typedef struct cgen_insn_list
{
- struct cgen_insn_list * next;
- const CGEN_INSN * insn;
+ struct cgen_insn_list *next;
+ const CGEN_INSN *insn;
} CGEN_INSN_LIST;
-/* The table of instructions. */
+/* Table of instructions. */
typedef struct
{
- /* Pointer to initial [compiled in] entries. */
- const CGEN_INSN * init_entries;
-
- /* Size of an entry (since the attribute member is variable sized). */
- unsigned int entry_size;
-
- /* Number of entries in `init_entries', including trailing NULL entry. */
+ const CGEN_INSN *init_entries;
+ unsigned int entry_size; /* since the attribute member is variable sized */
unsigned int num_init_entries;
-
- /* Values added at runtime. */
- CGEN_INSN_LIST * new_entries;
+ CGEN_INSN_LIST *new_entries;
} CGEN_INSN_TABLE;
-/* ??? This is currently used by the simulator. */
-extern const CGEN_INSN CGEN_SYM (insn_table_entries)[];
+/* Return number of instructions. This includes any added at run-time. */
+
+extern int cgen_insn_count (CGEN_CPU_DESC);
+extern int cgen_macro_insn_count (CGEN_CPU_DESC);
+
+/* Macros to access the other insn elements not recorded in CGEN_IBASE. */
-/* Return number of instructions. This includes any added at runtime. */
+/* Fetch INSN's operand instance table. */
+/* ??? Doesn't handle insns added at runtime. */
+#define CGEN_INSN_OPERANDS(insn) ((insn)->opinst)
-extern int cgen_insn_count PARAMS ((CGEN_OPCODE_DESC));
-extern int cgen_macro_insn_count PARAMS ((CGEN_OPCODE_DESC));
+/* Return INSN's opcode table entry. */
+#define CGEN_INSN_OPCODE(insn) ((insn)->opcode)
+
+/* Return INSN's handler data. */
+#define CGEN_INSN_HANDLERS(insn) CGEN_OPCODE_HANDLERS (CGEN_INSN_OPCODE (insn))
+
+/* Return INSN's syntax. */
+#define CGEN_INSN_SYNTAX(insn) CGEN_OPCODE_SYNTAX (CGEN_INSN_OPCODE (insn))
+
+/* Return size of base mask in bits. */
+#define CGEN_INSN_MASK_BITSIZE(insn) \
+ CGEN_OPCODE_MASK_BITSIZE (CGEN_INSN_OPCODE (insn))
+
+/* Return mask of base part of INSN. */
+#define CGEN_INSN_BASE_MASK(insn) \
+ CGEN_OPCODE_BASE_MASK (CGEN_INSN_OPCODE (insn))
+
+/* Return value of base part of INSN. */
+#define CGEN_INSN_BASE_VALUE(insn) \
+ CGEN_OPCODE_BASE_VALUE (CGEN_INSN_OPCODE (insn))
+
+/* Standard way to test whether INSN is supported by MACH.
+ MACH is one of enum mach_attr.
+ The "|1" is because the base mach is always selected. */
+#define CGEN_INSN_MACH_HAS_P(insn, mach) \
+((CGEN_INSN_ATTR_VALUE ((insn), CGEN_INSN_MACH) & ((1 << (mach)) | 1)) != 0)
\f
/* Macro instructions.
Macro insns aren't real insns, they map to one or more real insns.
If the expansion fails (e.g. "no match") NULL is returned.
Space for the expansion is obtained with malloc.
It is up to the caller to free it. */
- const char * (* fn) PARAMS ((const struct cgen_minsn_expansion *,
- const char *, const char **, int *, CGEN_OPERAND **));
+ const char * (* fn)
+ (const struct cgen_minsn_expansion *,
+ const char *, const char **, int *,
+ CGEN_OPERAND **);
#define CGEN_MIEXPN_FN(ex) ((ex)->fn)
/* Instruction(s) the macro expands to.
may contain further macro invocations. */
extern const char * cgen_expand_macro_insn
- PARAMS ((CGEN_OPCODE_DESC, const struct cgen_minsn_expansion *,
- const char *, const char **, int *, CGEN_OPERAND **));
+ (CGEN_CPU_DESC, const struct cgen_minsn_expansion *,
+ const char *, const char **, int *, CGEN_OPERAND **);
\f
/* The assembler insn table is hashed based on some function of the mnemonic
(the actually hashing done is up to the target, but we provide a few
examples like the first letter or a function of the entire mnemonic). */
-#ifndef CGEN_ASM_HASH_P
-#define CGEN_ASM_HASH_P(insn) 1
-#endif
-
-/* INSN is the CGEN_INSN entry when building the hash table and NULL
- when looking up the insn during assembly. */
-#ifndef CGEN_ASM_HASH
-#define CGEN_ASM_HASH_SIZE 127
-#ifdef CGEN_MNEMONIC_OPERANDS
-#define CGEN_ASM_HASH(mnem) (*(unsigned char *) (mnem) % CGEN_ASM_HASH_SIZE)
-#else
-#define CGEN_ASM_HASH(mnem) (*(unsigned char *) (mnem) % CGEN_ASM_HASH_SIZE) /*FIXME*/
-#endif
-#endif
-
extern CGEN_INSN_LIST * cgen_asm_lookup_insn
- PARAMS ((CGEN_OPCODE_DESC, const char *));
-#define CGEN_ASM_LOOKUP_INSN(od, string) cgen_asm_lookup_insn ((od), (string))
+ (CGEN_CPU_DESC, const char *);
+#define CGEN_ASM_LOOKUP_INSN(cd, string) cgen_asm_lookup_insn ((cd), (string))
#define CGEN_ASM_NEXT_INSN(insn) ((insn)->next)
/* The disassembler insn table is hashed based on some function of machine
instruction (the actually hashing done is up to the target). */
-#ifndef CGEN_DIS_HASH_P
-#define CGEN_DIS_HASH_P(insn) 1
-#endif
-
-/* It doesn't make much sense to provide a default here,
- but while this is under development we do.
- INSN is the CGEN_INSN entry when building the hash table and NULL
- when looking up the insn during assembly.
- BUFFER is a pointer to the bytes of the insn.
- VALUE is the first CGEN_BASE_INSN_SIZE bytes as an int in host order. */
-#ifndef CGEN_DIS_HASH
-#define CGEN_DIS_HASH_SIZE 256
-#define CGEN_DIS_HASH(buffer, value) (*(unsigned char *) (buffer))
-#endif
-
extern CGEN_INSN_LIST * cgen_dis_lookup_insn
- PARAMS ((CGEN_OPCODE_DESC, const char *, unsigned long));
-#define CGEN_DIS_LOOKUP_INSN(od, buf, value) cgen_dis_lookup_insn ((od), (buf), (value))
+ (CGEN_CPU_DESC, const char *, CGEN_INSN_INT);
+/* FIXME: delete these two */
+#define CGEN_DIS_LOOKUP_INSN(cd, buf, value) cgen_dis_lookup_insn ((cd), (buf), (value))
#define CGEN_DIS_NEXT_INSN(insn) ((insn)->next)
\f
-/* The opcode table.
- A copy of this is created when the opcode table is "opened".
- All global state information is recorded here. */
-/* ??? This is all low level implementation stuff here that might be better
- put in an internal file (much like the distinction between bfd.h and
- libbfd.h). That is an extra complication that is left for later. */
-
-typedef struct cgen_opcode_table
+/* The CPU description.
+ A copy of this is created when the cpu table is "opened".
+ All global state information is recorded here.
+ Access macros are provided for "public" members. */
+
+typedef struct cgen_cpu_desc
{
- const CGEN_HW_ENTRY * hw_list;
-#define CGEN_OPCODE_HW_LIST(od) ((od)->hw_list)
+ /* Bitmap of selected machine(s) (a la BFD machine number). */
+ int machs;
+
+ /* Bitmap of selected isa(s). */
+ CGEN_BITSET *isas;
+#define CGEN_CPU_ISAS(cd) ((cd)->isas)
+
+ /* Current endian. */
+ enum cgen_endian endian;
+#define CGEN_CPU_ENDIAN(cd) ((cd)->endian)
+
+ /* Current insn endian. */
+ enum cgen_endian insn_endian;
+#define CGEN_CPU_INSN_ENDIAN(cd) ((cd)->insn_endian)
+
+ /* Word size (in bits). */
+ /* ??? Or maybe maximum word size - might we ever need to allow a cpu table
+ to be opened for both sparc32/sparc64?
+ ??? Another alternative is to create a table of selected machs and
+ lazily fetch the data from there. */
+ unsigned int word_bitsize;
+
+ /* Instruction chunk size (in bits), for purposes of endianness
+ conversion. */
+ unsigned int insn_chunk_bitsize;
+
+ /* Indicator if sizes are unknown.
+ This is used by default_insn_bitsize,base_insn_bitsize if there is a
+ difference between the selected isa's. */
+#define CGEN_SIZE_UNKNOWN 65535
+
+ /* Default instruction size (in bits).
+ This is used by the assembler when it encounters an unknown insn. */
+ unsigned int default_insn_bitsize;
+
+ /* Base instruction size (in bits).
+ For non-LIW cpus this is generally the length of the smallest insn.
+ For LIW cpus its wip (work-in-progress). For the m32r its 32. */
+ unsigned int base_insn_bitsize;
+
+ /* Minimum/maximum instruction size (in bits). */
+ unsigned int min_insn_bitsize;
+ unsigned int max_insn_bitsize;
+
+ /* Instruction set variants. */
+ const CGEN_ISA *isa_table;
- const CGEN_OPERAND * operand_table;
-#define CGEN_OPCODE_OPERAND_TABLE(od) ((od)->operand_table)
+ /* Machine variants. */
+ const CGEN_MACH *mach_table;
+ /* Hardware elements. */
+ CGEN_HW_TABLE hw_table;
+
+ /* Instruction fields. */
+ const CGEN_IFLD *ifld_table;
+
+ /* Operands. */
+ CGEN_OPERAND_TABLE operand_table;
+
+ /* Main instruction table. */
CGEN_INSN_TABLE insn_table;
-#define CGEN_OPCODE_INSN_TABLE(od) (& (od)->insn_table)
+#define CGEN_CPU_INSN_TABLE(cd) (& (cd)->insn_table)
/* Macro instructions are defined separately and are combined with real
insns during hash table computation. */
CGEN_INSN_TABLE macro_insn_table;
-#define CGEN_OPCODE_MACRO_INSN_TABLE(od) (& (od)->macro_insn_table)
+
+ /* Copy of CGEN_INT_INSN_P. */
+ int int_insn_p;
+
+ /* Called to rebuild the tables after something has changed. */
+ void (*rebuild_tables) (CGEN_CPU_DESC);
+
+ /* Operand parser callback. */
+ cgen_parse_operand_fn * parse_operand_fn;
+
+ /* Parse/insert/extract/print cover fns for operands. */
+ const char * (*parse_operand)
+ (CGEN_CPU_DESC, int opindex_, const char **, CGEN_FIELDS *fields_);
+#ifdef __BFD_H_SEEN__
+ const char * (*insert_operand)
+ (CGEN_CPU_DESC, int opindex_, CGEN_FIELDS *fields_,
+ CGEN_INSN_BYTES_PTR, bfd_vma pc_);
+ int (*extract_operand)
+ (CGEN_CPU_DESC, int opindex_, CGEN_EXTRACT_INFO *, CGEN_INSN_INT,
+ CGEN_FIELDS *fields_, bfd_vma pc_);
+ void (*print_operand)
+ (CGEN_CPU_DESC, int opindex_, void * info_, CGEN_FIELDS * fields_,
+ void const *attrs_, bfd_vma pc_, int length_);
+#else
+ const char * (*insert_operand) ();
+ int (*extract_operand) ();
+ void (*print_operand) ();
+#endif
+#define CGEN_CPU_PARSE_OPERAND(cd) ((cd)->parse_operand)
+#define CGEN_CPU_INSERT_OPERAND(cd) ((cd)->insert_operand)
+#define CGEN_CPU_EXTRACT_OPERAND(cd) ((cd)->extract_operand)
+#define CGEN_CPU_PRINT_OPERAND(cd) ((cd)->print_operand)
+
+ /* Size of CGEN_FIELDS struct. */
+ unsigned int sizeof_fields;
+#define CGEN_CPU_SIZEOF_FIELDS(cd) ((cd)->sizeof_fields)
+
+ /* Set the bitsize field. */
+ void (*set_fields_bitsize) (CGEN_FIELDS *fields_, int size_);
+#define CGEN_CPU_SET_FIELDS_BITSIZE(cd) ((cd)->set_fields_bitsize)
+
+ /* CGEN_FIELDS accessors. */
+ int (*get_int_operand)
+ (CGEN_CPU_DESC, int opindex_, const CGEN_FIELDS *fields_);
+ void (*set_int_operand)
+ (CGEN_CPU_DESC, int opindex_, CGEN_FIELDS *fields_, int value_);
+#ifdef __BFD_H_SEEN__
+ bfd_vma (*get_vma_operand)
+ (CGEN_CPU_DESC, int opindex_, const CGEN_FIELDS *fields_);
+ void (*set_vma_operand)
+ (CGEN_CPU_DESC, int opindex_, CGEN_FIELDS *fields_, bfd_vma value_);
+#else
+ long (*get_vma_operand) ();
+ void (*set_vma_operand) ();
+#endif
+#define CGEN_CPU_GET_INT_OPERAND(cd) ((cd)->get_int_operand)
+#define CGEN_CPU_SET_INT_OPERAND(cd) ((cd)->set_int_operand)
+#define CGEN_CPU_GET_VMA_OPERAND(cd) ((cd)->get_vma_operand)
+#define CGEN_CPU_SET_VMA_OPERAND(cd) ((cd)->set_vma_operand)
+
+ /* Instruction parse/insert/extract/print handlers. */
+ /* FIXME: make these types uppercase. */
+ cgen_parse_fn * const *parse_handlers;
+ cgen_insert_fn * const *insert_handlers;
+ cgen_extract_fn * const *extract_handlers;
+ cgen_print_fn * const *print_handlers;
+#define CGEN_PARSE_FN(cd, insn) (cd->parse_handlers[(insn)->opcode->handlers.parse])
+#define CGEN_INSERT_FN(cd, insn) (cd->insert_handlers[(insn)->opcode->handlers.insert])
+#define CGEN_EXTRACT_FN(cd, insn) (cd->extract_handlers[(insn)->opcode->handlers.extract])
+#define CGEN_PRINT_FN(cd, insn) (cd->print_handlers[(insn)->opcode->handlers.print])
/* Return non-zero if insn should be added to hash table. */
- int (* asm_hash_p) PARAMS ((const CGEN_INSN *));
-#define CGEN_OPCODE_ASM_HASH_P(od) ((od)->asm_hash_p)
+ int (* asm_hash_p) (const CGEN_INSN *);
/* Assembler hash function. */
- unsigned int (* asm_hash) PARAMS ((const char *));
-#define CGEN_OPCODE_ASM_HASH(od) ((od)->asm_hash)
+ unsigned int (* asm_hash) (const char *);
/* Number of entries in assembler hash table. */
unsigned int asm_hash_size;
-#define CGEN_OPCODE_ASM_HASH_SIZE(od) ((od)->asm_hash_size)
/* Return non-zero if insn should be added to hash table. */
- int (* dis_hash_p) PARAMS ((const CGEN_INSN *));
-#define CGEN_OPCODE_DIS_HASH_P(od) ((od)->dis_hash_p)
+ int (* dis_hash_p) (const CGEN_INSN *);
/* Disassembler hash function. */
- unsigned int (* dis_hash) PARAMS ((const char *, unsigned long));
-#define CGEN_OPCODE_DIS_HASH(od) ((od)->dis_hash)
+ unsigned int (* dis_hash) (const char *, CGEN_INSN_INT);
/* Number of entries in disassembler hash table. */
unsigned int dis_hash_size;
-#define CGEN_OPCODE_DIS_HASH_SIZE(od) ((od)->dis_hash_size)
-
- /* Operand parser callback. */
- cgen_parse_operand_fn * parse_operand_fn;
-#define CGEN_OPCODE_PARSE_OPERAND_FN(od) ((od)->parse_operand_fn)
-
- /* Current machine (a la BFD machine number). */
- int mach;
-#define CGEN_OPCODE_MACH(od) ((od)->mach)
-
- /* Current endian. */
- enum cgen_endian endian;
-#define CGEN_OPCODE_ENDIAN(od) ((od)->endian)
/* Assembler instruction hash table. */
CGEN_INSN_LIST **asm_hash_table;
-#define CGEN_OPCODE_ASM_HASH_TABLE(od) ((od)->asm_hash_table)
CGEN_INSN_LIST *asm_hash_table_entries;
-#define CGEN_OPCODE_ASM_HASH_TABLE_ENTRIES(od) ((od)->asm_hash_table_entries)
/* Disassembler instruction hash table. */
- CGEN_INSN_LIST ** dis_hash_table;
-#define CGEN_OPCODE_DIS_HASH_TABLE(od) ((od)->dis_hash_table)
- CGEN_INSN_LIST * dis_hash_table_entries;
-#define CGEN_OPCODE_DIS_HASH_TABLE_ENTRIES(od) ((od)->dis_hash_table_entries)
+ CGEN_INSN_LIST **dis_hash_table;
+ CGEN_INSN_LIST *dis_hash_table_entries;
+
+ /* This field could be turned into a bitfield if room for other flags is needed. */
+ unsigned int signed_overflow_ok_p;
+
+} CGEN_CPU_TABLE;
-} CGEN_OPCODE_TABLE;
+/* wip */
+#ifndef CGEN_WORD_ENDIAN
+#define CGEN_WORD_ENDIAN(cd) CGEN_CPU_ENDIAN (cd)
+#endif
+#ifndef CGEN_INSN_WORD_ENDIAN
+#define CGEN_INSN_WORD_ENDIAN(cd) CGEN_CPU_INSN_ENDIAN (cd)
+#endif
\f
/* Prototypes of major functions. */
+/* FIXME: Move more CGEN_SYM-defined functions into CGEN_CPU_DESC.
+ Not the init fns though, as that would drag in things that mightn't be
+ used and might not even exist. */
+
+/* Argument types to cpu_open. */
+
+enum cgen_cpu_open_arg {
+ CGEN_CPU_OPEN_END,
+ /* Select instruction set(s), arg is bitmap or 0 meaning "unspecified". */
+ CGEN_CPU_OPEN_ISAS,
+ /* Select machine(s), arg is bitmap or 0 meaning "unspecified". */
+ CGEN_CPU_OPEN_MACHS,
+ /* Select machine, arg is mach's bfd name.
+ Multiple machines can be specified by repeated use. */
+ CGEN_CPU_OPEN_BFDMACH,
+ /* Select endian, arg is CGEN_ENDIAN_*. */
+ CGEN_CPU_OPEN_ENDIAN,
+ /* Select instruction endian, arg is CGEN_ENDIAN_*. */
+ CGEN_CPU_OPEN_INSN_ENDIAN,
+};
+
+/* Open a cpu descriptor table for use.
+ ??? We only support ISO C stdargs here, not K&R.
+ Laziness, plus experiment to see if anything requires K&R - eventually
+ K&R will no longer be supported - e.g. GDB is currently trying this. */
+
+extern CGEN_CPU_DESC CGEN_SYM (cpu_open) (enum cgen_cpu_open_arg, ...);
+
+/* Cover fn to handle simple case. */
+
+extern CGEN_CPU_DESC CGEN_SYM (cpu_open_1)
+ (const char *mach_name_, enum cgen_endian endian_);
-/* Open an opcode table for use. */
-extern CGEN_OPCODE_DESC CGEN_SYM (opcode_open)
- PARAMS ((int, enum cgen_endian));
/* Close it. */
-extern void CGEN_SYM (opcode_close) PARAMS ((CGEN_OPCODE_DESC));
-/* `init_tables' must be called before `xxx_supported'. */
-extern void CGEN_SYM (init_tables) PARAMS ((int));
+extern void CGEN_SYM (cpu_close) (CGEN_CPU_DESC);
-/* Initialize an opcode table for assembler or disassembler use.
- These must be called immediately after opcode_open. */
-extern void CGEN_SYM (init_asm) PARAMS ((CGEN_OPCODE_DESC));
-extern void CGEN_SYM (init_dis) PARAMS ((CGEN_OPCODE_DESC));
+/* Initialize the opcode table for use.
+ Called by init_asm/init_dis. */
-/* Change the mach and/or endianness. */
-extern void cgen_set_cpu PARAMS ((CGEN_OPCODE_DESC, int, enum cgen_endian));
+extern void CGEN_SYM (init_opcode_table) (CGEN_CPU_DESC cd_);
-/* FIXME: This prototype is wrong ifndef CGEN_INT_INSN.
- Furthermore, ifdef CGEN_INT_INSN, the insn is created in
- target byte order (in which case why use int's at all).
- Perhaps replace cgen_insn_t * with char *? */
-extern const CGEN_INSN * CGEN_SYM (assemble_insn)
- PARAMS ((CGEN_OPCODE_DESC, const char *, CGEN_FIELDS *, cgen_insn_t *, char **));
-#if 0 /* old */
-extern int CGEN_SYM (insn_supported) PARAMS ((const CGEN_INSN *));
-extern int CGEN_SYM (opval_supported) PARAMS ((const struct cgen_opval *));
-#endif
+/* build the insn selection regex.
+ called by init_opcode_table */
-extern const CGEN_KEYWORD CGEN_SYM (operand_mach);
-extern int CGEN_SYM (get_mach) PARAMS ((const char *));
-
-extern const CGEN_INSN * CGEN_SYM (lookup_insn)
- PARAMS ((CGEN_OPCODE_DESC, const CGEN_INSN *,
- cgen_insn_t, int, CGEN_FIELDS *, int));
-extern void CGEN_SYM (get_insn_operands)
- PARAMS ((CGEN_OPCODE_DESC, const CGEN_INSN *, const CGEN_FIELDS *, int *));
-extern const CGEN_INSN * CGEN_SYM (lookup_get_insn_operands)
- PARAMS ((CGEN_OPCODE_DESC, const CGEN_INSN *, cgen_insn_t, int, int *));
-
-/* Get/set fields in the CGEN_FIELDS struct. */
-int CGEN_SYM (get_int_operand)
- PARAMS ((int, const CGEN_FIELDS *));
-void CGEN_SYM (set_int_operand)
- PARAMS ((int, CGEN_FIELDS *, int));
-#ifdef BFD_VERSION /* Don't require bfd.h unnecessarily. */
-bfd_vma CGEN_SYM (get_vma_operand)
- PARAMS ((int, const CGEN_FIELDS *));
-void CGEN_SYM (set_vma_operand)
- PARAMS ((int, CGEN_FIELDS *, bfd_vma));
-#endif
+extern char * CGEN_SYM(build_insn_regex) (CGEN_INSN *insn_);
-extern const char * CGEN_SYM (parse_operand)
- PARAMS ((CGEN_OPCODE_DESC, int, const char **, CGEN_FIELDS *));
+/* Initialize the ibld table for use.
+ Called by init_asm/init_dis. */
-#ifdef BFD_VERSION /* Don't require bfd.h unnecessarily. */
-extern const char * CGEN_SYM (insert_operand)
- PARAMS ((CGEN_OPCODE_DESC, int, CGEN_FIELDS *, char *, bfd_vma));
-#endif
+extern void CGEN_SYM (init_ibld_table) (CGEN_CPU_DESC cd_);
+
+/* Initialize an cpu table for assembler or disassembler use.
+ These must be called immediately after cpu_open. */
+
+extern void CGEN_SYM (init_asm) (CGEN_CPU_DESC);
+extern void CGEN_SYM (init_dis) (CGEN_CPU_DESC);
-/* Read in a cpu description file. */
-extern const char * cgen_read_cpu_file
- PARAMS ((CGEN_OPCODE_DESC, const char * /*filename*/));
+/* Initialize the operand instance table for use. */
+
+extern void CGEN_SYM (init_opinst_table) (CGEN_CPU_DESC cd_);
+
+/* Assemble an instruction. */
+
+extern const CGEN_INSN * CGEN_SYM (assemble_insn)
+ (CGEN_CPU_DESC, const char *, CGEN_FIELDS *,
+ CGEN_INSN_BYTES_PTR, char **);
+
+extern const CGEN_KEYWORD CGEN_SYM (operand_mach);
+extern int CGEN_SYM (get_mach) (const char *);
+
+/* Operand index computation. */
+extern const CGEN_INSN * cgen_lookup_insn
+ (CGEN_CPU_DESC, const CGEN_INSN * insn_,
+ CGEN_INSN_INT int_value_, unsigned char *bytes_value_,
+ int length_, CGEN_FIELDS *fields_, int alias_p_);
+extern void cgen_get_insn_operands
+ (CGEN_CPU_DESC, const CGEN_INSN * insn_,
+ const CGEN_FIELDS *fields_, int *indices_);
+extern const CGEN_INSN * cgen_lookup_get_insn_operands
+ (CGEN_CPU_DESC, const CGEN_INSN *insn_,
+ CGEN_INSN_INT int_value_, unsigned char *bytes_value_,
+ int length_, int *indices_, CGEN_FIELDS *fields_);
+
+/* Cover fns to bfd_get/set. */
+
+extern CGEN_INSN_INT cgen_get_insn_value
+ (CGEN_CPU_DESC, unsigned char *, int, int);
+extern void cgen_put_insn_value
+ (CGEN_CPU_DESC, unsigned char *, int, CGEN_INSN_INT, int);
+
+extern CGEN_INSN_INT cgen_get_base_insn_value
+ (CGEN_CPU_DESC, unsigned char *, int);
+extern void cgen_put_base_insn_value
+ (CGEN_CPU_DESC, unsigned char *, int, CGEN_INSN_INT);
+
+/* Read in a cpu description file.
+ ??? For future concerns, including adding instructions to the assembler/
+ disassembler at run-time. */
+
+extern const char * cgen_read_cpu_file (CGEN_CPU_DESC, const char * filename_);
+
+/* Allow signed overflow of instruction fields. */
+extern void cgen_set_signed_overflow_ok (CGEN_CPU_DESC);
+
+/* Generate an error message if a signed field in an instruction overflows. */
+extern void cgen_clear_signed_overflow_ok (CGEN_CPU_DESC);
+
+/* Will an error message be generated if a signed field in an instruction overflows ? */
+extern unsigned int cgen_signed_overflow_ok_p (CGEN_CPU_DESC);
+
+#ifdef __cplusplus
+}
+#endif
-#endif /* CGEN_H */
+#endif /* OPCODE_CGEN_H */
projects / thirdparty / binutils-gdb.git / blobdiff