'advproxy banned mac clients' => 'Banned MAC addresses (one per line)',
'advproxy cache management' => 'Cache management',
'advproxy cache replacement policy' => 'Cache replacement policy',
+'advproxy cache-digest' => 'Enable Cache-Digest Generation',
'advproxy chgwebpwd ERROR' => 'E R R O R :',
'advproxy chgwebpwd SUCCESS' => 'S U C C E S S :',
'advproxy chgwebpwd change password' => 'Change password',
'behind a proxy' => 'Behind a proxy:',
'bewan adsl pci st' => 'TO BE REMOVED',
'bewan adsl usb' => 'TO BE REMOVED',
+'bit' => 'Bit',
'bitrate' => 'Bitrate',
'bleeding rules' => 'Bleeding Edge Snort Rules',
'blue' => 'BLUE',
'dns saved' => 'Successfully saved!',
'dns saved txt' => 'The two entered DNS server addresses have been saved successfully.<br />You have to reboot or reconnect that the changes have effect!',
'dns server' => 'DNS Server',
+'dns servers' => 'DNS Servers',
'dns title' => 'Domain Name System',
'dnsforward' => 'DNS Forwarding',
'dnsforward add a new entry' => 'Add a new entry',
'done' => 'Do it',
'dos charset' => 'DOS Charset',
'down and up speed' => 'Enter your Down- and Uplink-Speed <br /> and then press <i>Save</i>.',
+'downlink' => 'Downlink',
'downlink speed' => 'Downlink speed (kbit/sec)',
'downlink std class' => 'downlink standard class',
'download' => 'download',
'end address' => 'End address:',
'enter ack class' => 'Enter the ACK- Class <br /> and then press <i>Save</i>.',
'enter data' => 'Enter your settings <br /> and then press <i>Save</i>.',
+'entropy' => 'Entropy',
+'entropy graphs' => 'Entropy Graphs',
'err bk 1' => 'Error creating archive',
'err bk 10 password' => 'Error with backup password',
'err bk 2 key' => 'Error creating key file',
'firewallhits' => 'firewallhits',
'firmware' => 'Firmware',
'firmware upload' => 'Upload Firmware/Drivers',
+'first' => 'First',
'fixed ip lease added' => 'Fixed IP lease added',
'fixed ip lease modified' => 'Fixed IP lease modified',
'fixed ip lease removed' => 'Fixed IP lease removed',
'fwdfw delete' => 'Delete',
'fwdfw dnat' => 'Destination NAT (Port forwarding)',
'fwdfw dnat error' => 'You have to select a single host for DNAT. Groups or networks are not allowed.',
+'fwdfw dnat extport' => 'The external port has to be empty when using Source NAT rules.',
+'fwdfw dnat nochoice' => 'Please pick Source NAT or Destination NAT from the NAT section.',
'fwdfw dnat porterr' => 'You have to select a single port or portrange (tcp/udp) for NAT',
'fwdfw dnat porterr2' => 'Cannot use external port (NAT) when no destination port is defined.',
'fwdfw edit' => 'Edit',
'fwdfw from' => 'From:',
'fwdfw hint ip1' => 'The last generated rule may never match, because source and destination subnets may overlap.',
'fwdfw hint ip2' => 'Please double-check if this rule makes sense: ',
+'fwdfw hint mac' => 'The destination group contains MAC addresses, which will be skipped during rule creation.',
'fwdfw iface' => 'Interface',
'fwdfw ipsec network' => 'IPsec networks:',
'fwdfw log' => 'Log',
'fwdfw sourceip' => 'Source address (MAC/IP address or network):',
'fwdfw std network' => 'Standard networks:',
'fwdfw target' => 'Destination',
-'fwdfw targetip' => 'Destination address (MAC/IP address or network):',
+'fwdfw targetip' => 'Destination address (IP address or network):',
'fwdfw till' => 'Until:',
'fwdfw time' => 'Time Constraints',
'fwdfw timeframe' => 'Use time constraints',
'harddisk temperature' => 'Harddisk Temperature',
'harddisk temperature graphs' => 'HDD Graphs',
'hardware graphs' => 'Hardware Graphs',
+'hardware support' => 'Hardware Support',
'hdd temperature in' => 'Harddisk temperature in',
'help' => 'Help',
'high' => 'High',
'ipinfo' => 'IP info',
'ipsec' => 'IPsec',
'ipsec network' => 'IPsec network',
+'ipsec no connections' => 'No active IPsec connections',
'iptable rules' => 'IPTable rules',
'iptmangles' => 'IPTable Mangles',
'iptnats' => 'IPTable Network Address Translation',
'lan' => 'LAN',
'lang' => 'en',
'languagepurpose' => 'Select the language you wish IPFire to display in:',
+'last' => 'Last',
'last activity' => 'Last Activity',
'lateprompting' => 'Lateprompting',
'lease expires' => 'Lease expires',
'mac address saved txt' => 'The MAC address has been successfully saved, but changes will only take effect after reboot or reconnection.',
'mac address title' => 'Assign MAC Address',
'mac desc' => 'Here you are able to change the MAC address on red0. The address must be entered in hexadecimal (0-9,a-f), a valid entry is <br />e.g. 00-01-02-0e-b8-d6 or 00:01:02:0e:b8:d6.',
+'mac filter' => 'MAC filter',
'mac new' => 'new MAC address:',
'mac1 new' => 'new MAC address 1 (vdsl-inet):',
'mac2 new' => 'new MAC address 2 (vdsl-iptv):',
'max size' => 'Max object size (KB):',
'max throughput' => 'Maximum throughput',
'maximal' => 'Maximal',
+'maximum' => 'Maximum',
'maximum retries' => 'Maximum retries:',
'may' => 'May',
'mbmon display' => 'Display',
'min delay' => 'Minimum delay',
'min size' => 'Min object size (KB):',
'minimal' => 'Minimal',
+'minimum' => 'Minimum',
'minute' => 'Minute',
'minutes' => 'Minutes',
'misc-options' => 'Miscellaneous options',
'no eciadsl synch.bin file' => 'No ECI ADSL synch.bin file. Please upload.',
'no filter pass' => 'Enter the standard class for non-filtered packets.',
'no fritzdsl driver' => 'No Fritz!DSL driver. Please upload.',
+'no hardware random number generator' => 'This system has no source for entropy.',
'no information available' => 'No information available.',
'no log selected' => 'No log selected',
'no modem selected' => 'No modem selected',
'ovpn errmsg green already pushed' => 'Route for green network is always set',
'ovpn errmsg invalid ip or mask' => 'Invalid network-address or subnetmask',
'ovpn log' => 'OVPN-Log',
+'ovpn mgmt in root range' => 'A port number of 1024 or higher is required.',
'ovpn mtu-disc' => 'Path MTU Discovery',
'ovpn mtu-disc and mtu not 1500' => 'Path MTU Discovery requires a MTU of 1500.',
'ovpn mtu-disc maybe' => 'Optionally',
'ovpn mtu-disc off' => 'Disabled',
'ovpn mtu-disc with mssfix or fragment' => 'Path MTU Discovery cannot be used with mssfix or fragment.',
'ovpn mtu-disc yes' => 'Forced',
+'ovpn no connections' => 'No active OpenVPN connections',
'ovpn on blue' => 'OpenVPN on BLUE',
'ovpn on orange' => 'OpenVPN on ORANGE',
'ovpn on red' => 'OpenVPN on RED',
-'ovpn mgmt in root range' => 'A port number of 1024 or higher is required.',
'ovpn port in root range' => 'A port number of 1024 or higher is required.',
'ovpn routes push' => 'Routes (one per line) e.g. 192.168.10.0/255.255.255.0 192.168.20.0/24',
'ovpn routes push options' => 'Route push options',
'swap usage per' => 'Swap usage per',
'system' => 'System',
'system graphs' => 'System Graphs',
+'system has hwrng' => 'This system has got a hardware random number generator.',
+'system has rdrand' => 'This system has got support for Intel(R) RDRAND.',
'system information' => 'System Information',
'system log viewer' => 'System Log Viewer',
'system logs' => 'System Logs',
'updxlrtr weekly' => 'weekly',
'updxlrtr year' => 'one year',
'upgrade' => 'upgrade',
+'uplink' => 'Uplink',
'uplink speed' => 'Uplink speed (kbit/sec)',
'uplink std class' => 'uplink standard class',
'upload' => 'Upload',
'wlan client wpa mode ccmp ccmp' => 'CCMP-CCMP',
'wlan client wpa mode ccmp tkip' => 'CCMP-TKIP',
'wlan client wpa mode tkip tkip' => 'TKIP-TKIP',
+'wlan clients' => 'Wireless clients',
'wlanap access point' => 'Access Point',
'wlanap channel' => 'Channel',
'wlanap country' => 'Country Code',