]> git.ipfire.org Git - people/pmueller/ipfire-3.x.git/blobdiff - net-tools/patches/003-net-tools-man.patch
net-tools: Update to 2.0 git-rev e5f1be13.
[people/pmueller/ipfire-3.x.git] / net-tools / patches / 003-net-tools-man.patch
diff --git a/net-tools/patches/003-net-tools-man.patch b/net-tools/patches/003-net-tools-man.patch
new file mode 100644 (file)
index 0000000..1a33a1e
--- /dev/null
@@ -0,0 +1,149 @@
+diff -up net-tools-2.0/man/en_US/arp.8.man net-tools-2.0/man/en_US/arp.8
+--- net-tools-2.0/man/en_US/arp.8.man  2014-04-26 02:45:16.000000000 +0200
++++ net-tools-2.0/man/en_US/arp.8      2014-07-07 14:51:31.378459439 +0200
+@@ -63,6 +63,10 @@ arp \- manipulate the system ARP cache
+ .B \-f
+ .RI [ filename ]
++.SH NOTE
++.P
++This program is obsolete. For replacement check \fBip neigh\fR.
++
+ .SH DESCRIPTION
+ .B Arp
+ manipulates or displays the kernel's IPv4 network neighbour cache. It can add
+@@ -219,6 +223,6 @@ published proxy ARP entries and permanen
+ .br
+ .I /etc/ethers
+ .SH SEE ALSO
+-rarp(8), route(8), ifconfig(8), netstat(8)
++.BR ip(8)
+ .SH AUTHORS
+ Fred N. van Kempen <waltje@uwalt.nl.mugnet.org>, Bernd Eckenfels <net\-tools@lina.inka.de>.
+diff -up net-tools-2.0/man/en_US/ethers.5.man net-tools-2.0/man/en_US/ethers.5
+--- net-tools-2.0/man/en_US/ethers.5.man       2014-04-26 02:45:16.000000000 +0200
++++ net-tools-2.0/man/en_US/ethers.5   2014-07-07 14:51:31.378459439 +0200
+@@ -26,6 +26,3 @@ can be resolved by DNS or a dot separate
+ .SH FILES \"{{{
+ /etc/ethers
+ .\"}}}
+-.SH "SEE ALSO" \"{{{
+-rarp(8)
+-.\"}}}
+diff -up net-tools-2.0/man/en_US/ifconfig.8.man net-tools-2.0/man/en_US/ifconfig.8
+--- net-tools-2.0/man/en_US/ifconfig.8.man     2014-04-26 02:45:16.000000000 +0200
++++ net-tools-2.0/man/en_US/ifconfig.8 2014-07-07 14:51:31.379459422 +0200
+@@ -5,6 +5,13 @@ ifconfig \- configure a network interfac
+ .B "ifconfig [-v] [-a] [-s] [interface]"
+ .br
+ .B "ifconfig [-v] interface [aftype] options | address ..."
++
++.SH NOTE
++.P 
++This program is obsolete!
++For replacement check \fBip addr\fR and \fBip link\fR.
++For statistics use \fBip -s link\fR.
++
+ .SH DESCRIPTION
+ .B Ifconfig
+ is used to configure the kernel-resident network interfaces.  It is
+@@ -222,7 +229,8 @@ package to display link layer informatio
+ While appletalk DDP and IPX addresses will be displayed they cannot be
+ altered by this command.
+ .SH SEE ALSO
+-route(8), netstat(8), arp(8), rarp(8), iptables(8), ifup(8), interfaces(5).
++.BR ip(8),
++.BR iptables(8)
+ .br
+ http://physics.nist.gov/cuu/Units/binary.html - Prefixes for binary multiples
+ .SH AUTHORS
+diff -up net-tools-2.0/man/en_US/mii-tool.8.man net-tools-2.0/man/en_US/mii-tool.8
+--- net-tools-2.0/man/en_US/mii-tool.8.man     2014-04-26 02:45:16.000000000 +0200
++++ net-tools-2.0/man/en_US/mii-tool.8 2014-07-07 14:51:31.379459422 +0200
+@@ -18,6 +18,10 @@ mii\-tool \- view, manipulate media-inde
+ [\fB\-p\fR, \fB\-\-phy=\fIaddr\fR]
+ .RI "interface\ ..."
++.SH NOTE
++.P 
++This program is obsolete. For replacement check \fBethtool\fB.
++
+ .SH DESCRIPTION
+ This utility checks or sets the status of a network interface's Media
+ Independent Interface (MII) unit.  Most fast ethernet adapters use an
+@@ -93,6 +97,9 @@ SIOCGMIIPHY on 'eth?' failed: Operation
+ The interface in question does not support MII queries. Most likely, it does not have 
+ MII transceivers, at all.
++.SH SEE ALSO
++ethtool(8)
++
+ .SH AUTHORS
+ David Hinds \- dhinds@pcmcia.sourceforge.org
+ .br
+diff -up net-tools-2.0/man/en_US/nameif.8.man net-tools-2.0/man/en_US/nameif.8
+--- net-tools-2.0/man/en_US/nameif.8.man       2014-04-26 02:45:16.000000000 +0200
++++ net-tools-2.0/man/en_US/nameif.8   2014-07-07 14:51:31.379459422 +0200
+@@ -5,6 +5,12 @@ nameif \- name network interfaces based
+ .B "nameif [\-c configfile] [\-s]"
+ .br
+ .B "nameif [\-c configfile] [\-s] {interface macaddress}"
++
++.SH NOTE
++.P 
++This program is obsolete. For replacement check \fBip link\fR.
++This functionality is also much better provided by udev methods.
++
+ .SH DESCRIPTION
+ .B nameif 
+ renames network interfaces based on mac addresses. When no arguments are
+@@ -31,5 +37,10 @@ should be run before the interface is up
+ .SH FILES
+ /etc/mactab
++
++.SH SEE ALSO
++.BR ip(8),
++.BR udev(7)
++
+ .SH BUGS
+ Only works for Ethernet currently.
+diff -up net-tools-2.0/man/en_US/netstat.8.man net-tools-2.0/man/en_US/netstat.8
+--- net-tools-2.0/man/en_US/netstat.8.man      2014-07-07 14:51:31.370459575 +0200
++++ net-tools-2.0/man/en_US/netstat.8  2014-07-07 14:51:31.380459405 +0200
+@@ -198,7 +198,8 @@ Show the PID and name of the program to
+ .SS "\-l, \-\-listening"
+ Show only listening sockets.  (These are omitted by default.)
+ .SS "\-a, \-\-all"
+-Show both listening and non-listening sockets.  With the
++Show both listening and non-listening (for TCP this means established
++connections) sockets.  With the
+ .B \-\-interfaces
+ option, show interfaces that are not up
+ .SS "\-F"
+diff -up net-tools-2.0/man/en_US/route.8.man net-tools-2.0/man/en_US/route.8
+--- net-tools-2.0/man/en_US/route.8.man        2014-04-26 02:45:16.000000000 +0200
++++ net-tools-2.0/man/en_US/route.8    2014-07-07 14:52:58.766977905 +0200
+@@ -57,6 +57,11 @@ family
+ .RB [ \-\-version ]
+ .RB [ \-h ]
+ .RB [ \-\-help ]
++
++.SH NOTE
++.P 
++This program is obsolete. For replacement check \fBip route\fR.
++
+ .SH DESCRIPTION
+ .B Route
+ manipulates the kernel's IP routing tables.  Its primary use is to set
+@@ -330,10 +335,6 @@ Whether or not the hardware address for
+ .I /proc/net/rt_cache
+ .LP
+ .SH "SEE ALSO"
+-.IR ifconfig (8),
+-.IR netstat (8), 
+-.IR arp (8), 
+-.IR rarp (8),
+ .IR ip (8)
+ .LP
+ .SH HISTORY