*/
-/* The TRACE manifests enable the provision of extra features. If they
- are not defined then a simpler (quicker) simulator is constructed
- without the required run-time checks, etc. */
-#if 1 /* 0 to allow user build selection, 1 to force inclusion */
-#define TRACE (1)
-#endif
+/* This must come before any other includes. */
+#include "defs.h"
#include "bfd.h"
#include "sim-main.h"
#include "itable.h"
-
-#include "config.h"
-
#include <stdio.h>
#include <stdarg.h>
#include <ansidecl.h>
#include <ctype.h>
#include <limits.h>
#include <math.h>
-#ifdef HAVE_STDLIB_H
#include <stdlib.h>
-#endif
-#ifdef HAVE_STRING_H
#include <string.h>
-#else
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-#endif
#include "getopt.h"
#include "libiberty.h"
#include "bfd.h"
-#include "callback.h" /* GDB simulator callback interface */
-#include "remote-sim.h" /* GDB simulator interface */
-
-#include "sysdep.h"
+#include "elf-bfd.h"
+#include "sim/callback.h" /* GDB simulator callback interface */
+#include "sim/sim.h" /* GDB simulator interface */
+#include "sim-syscall.h" /* Simulator system call support */
-#ifndef PARAMS
-#define PARAMS(x)
-#endif
-
-char* pr_addr PARAMS ((SIM_ADDR addr));
-char* pr_uword64 PARAMS ((uword64 addr));
+char* pr_addr (SIM_ADDR addr);
+char* pr_uword64 (uword64 addr);
/* Within interp.c we refer to the sim_state and sim_cpu directly. */
trap is required. NOTE: Care must be taken, since this value may be
used in later revisions of the MIPS ISA. */
-#define RSVD_INSTRUCTION (0x00000005)
+#define RSVD_INSTRUCTION (0x00000039)
#define RSVD_INSTRUCTION_MASK (0xFC00003F)
#define RSVD_INSTRUCTION_ARG_SHIFT 6
/*-- GDB simulator interface ------------------------------------------------*/
/*---------------------------------------------------------------------------*/
-static void ColdReset PARAMS((SIM_DESC sd));
+static void ColdReset (SIM_DESC sd);
/*---------------------------------------------------------------------------*/
/* Note that the monitor code essentially assumes this layout of memory.
If you change these, change the monitor code, too. */
+/* FIXME Currently addresses are truncated to 32-bits, see
+ mips/sim-main.c:address_translation(). If that changes, then these
+ values will need to be extended, and tested for more carefully. */
#define K0BASE (0x80000000)
#define K0SIZE (0x20000000)
#define K1BASE (0xA0000000)
static SIM_RC sim_firmware_command (SIM_DESC sd, char* arg);
+#define MEM_SIZE (8 << 20) /* 8 MBytes */
-#define MEM_SIZE (2 << 20)
-
-#if defined(TRACE)
+#if WITH_TRACE_ANY_P
static char *tracefile = "trace.din"; /* default filename for trace log */
FILE *tracefh = NULL;
-static void open_trace PARAMS((SIM_DESC sd));
-#endif /* TRACE */
+static void open_trace (SIM_DESC sd);
+#else
+#define open_trace(sd)
+#endif
static const char * get_insn_name (sim_cpu *, int);
OPTION_DINERO_TRACE = OPTION_START,
OPTION_DINERO_FILE,
OPTION_FIRMWARE,
+ OPTION_INFO_MEMORY,
OPTION_BOARD
};
+static int display_mem_info = 0;
static SIM_RC
-mips_option_handler (sd, cpu, opt, arg, is_command)
- SIM_DESC sd;
- sim_cpu *cpu;
- int opt;
- char *arg;
- int is_command;
+mips_option_handler (SIM_DESC sd, sim_cpu *cpu, int opt, char *arg,
+ int is_command)
{
int cpu_nr;
switch (opt)
{
case OPTION_DINERO_TRACE: /* ??? */
-#if defined(TRACE)
+#if WITH_TRACE_ANY_P
/* Eventually the simTRACE flag could be treated as a toggle, to
allow external control of the program points being traced
(i.e. only from main onwards, excluding the run-time setup,
}
}
return SIM_RC_OK;
-#else /* !TRACE */
+#else /* !WITH_TRACE_ANY_P */
fprintf(stderr,"\
Simulator constructed without dinero tracing support (for performance).\n\
-Re-compile simulator with \"-DTRACE\" to enable this option.\n");
+Re-compile simulator with \"-DWITH_TRACE_ANY_P\" to enable this option.\n");
return SIM_RC_FAIL;
-#endif /* !TRACE */
+#endif /* !WITH_TRACE_ANY_P */
case OPTION_DINERO_FILE:
-#if defined(TRACE)
+#if WITH_TRACE_ANY_P
if (optarg != NULL) {
char *tmp;
tmp = (char *)malloc(strlen(optarg) + 1);
sim_io_printf(sd,"Placing trace information into file \"%s\"\n",tracefile);
}
}
-#endif /* TRACE */
+#endif /* WITH_TRACE_ANY_P */
return SIM_RC_OK;
case OPTION_FIRMWARE:
}
return SIM_RC_OK;
}
+
+ case OPTION_INFO_MEMORY:
+ display_mem_info = 1;
+ break;
}
return SIM_RC_OK;
, "Customize simulation for a particular board.", mips_option_handler },
+ /* These next two options have the same names as ones found in the
+ memory_options[] array in common/sim-memopt.c. This is because
+ the intention is to provide an alternative handler for those two
+ options. We need an alternative handler because the memory
+ regions are not set up until after the command line arguments
+ have been parsed, and so we cannot display the memory info whilst
+ processing the command line. There is a hack in sim_open to
+ remove these handlers when we want the real --memory-info option
+ to work. */
+ { { "info-memory", no_argument, NULL, OPTION_INFO_MEMORY },
+ '\0', NULL, "List configured memory regions", mips_option_handler },
+ { { "memory-info", no_argument, NULL, OPTION_INFO_MEMORY },
+ '\0', NULL, NULL, mips_option_handler },
+
{ {NULL, no_argument, NULL, 0}, '\0', NULL, NULL, NULL }
};
interrupt_event (SIM_DESC sd, void *data)
{
sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */
- address_word cia = CIA_GET (cpu);
+ address_word cia = CPU_PC_GET (cpu);
if (SR & status_IE)
{
interrupt_pending = 0;
/*-- GDB simulator interface ------------------------------------------------*/
/*---------------------------------------------------------------------------*/
+static sim_cia
+mips_pc_get (sim_cpu *cpu)
+{
+ return PC;
+}
+
+static void
+mips_pc_set (sim_cpu *cpu, sim_cia pc)
+{
+ PC = pc;
+}
+
+static int mips_reg_fetch (SIM_CPU *, int, unsigned char *, int);
+static int mips_reg_store (SIM_CPU *, int, unsigned char *, int);
+
SIM_DESC
-sim_open (kind, cb, abfd, argv)
- SIM_OPEN_KIND kind;
- host_callback *cb;
- struct _bfd *abfd;
- char **argv;
+sim_open (SIM_OPEN_KIND kind, host_callback *cb,
+ struct bfd *abfd, char * const *argv)
{
- SIM_DESC sd = sim_state_alloc (kind, cb);
- sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */
+ int i;
+ SIM_DESC sd = sim_state_alloc_extra (kind, cb,
+ sizeof (struct mips_sim_state));
+ sim_cpu *cpu;
SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
+ /* The cpu data is kept in a separately allocated chunk of memory. */
+ if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK)
+ return 0;
+
+ cpu = STATE_CPU (sd, 0); /* FIXME */
+
/* FIXME: watchpoints code shouldn't need this */
- STATE_WATCHPOINTS (sd)->pc = &(PC);
- STATE_WATCHPOINTS (sd)->sizeof_pc = sizeof (PC);
STATE_WATCHPOINTS (sd)->interrupt_handler = interrupt_event;
/* Initialize the mechanism for doing insn profiling. */
sim_add_option_table (sd, NULL, mips_options);
- /* getopt will print the error message so we just have to exit if this fails.
- FIXME: Hmmm... in the case of gdb we need getopt to call
- print_filtered. */
+ /* The parser will print an error message for us, so we silently return. */
if (sim_parse_args (sd, argv) != SIM_RC_OK)
{
/* Uninstall the modules to avoid memory leaks,
if (board == NULL)
{
/* Allocate core managed memory */
-
+ sim_memopt *entry, *match = NULL;
+ address_word mem_size = 0;
+ int mapped = 0;
/* For compatibility with the old code - under this (at level one)
are the kernel spaces K0 & K1. Both of these map to a single
smaller sub region */
sim_do_command(sd," memory region 0x7fff8000,0x8000") ; /* MTZ- 32 k stack */
- sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx%%0x%lx,0x%0x",
- K1BASE, K0SIZE,
- MEM_SIZE, /* actual size */
- K0BASE);
-
+
+ /* Look for largest memory region defined on command-line at
+ phys address 0. */
+ for (entry = STATE_MEMOPT (sd); entry != NULL; entry = entry->next)
+ {
+ /* If we find an entry at address 0, then we will end up
+ allocating a new buffer in the "memory alias" command
+ below. The region at address 0 will be deleted. */
+ address_word size = (entry->modulo != 0
+ ? entry->modulo : entry->nr_bytes);
+ if (entry->addr == 0
+ && (!match || entry->level < match->level))
+ match = entry;
+ else if (entry->addr == K0BASE || entry->addr == K1BASE)
+ mapped = 1;
+ else
+ {
+ sim_memopt *alias;
+ for (alias = entry->alias; alias != NULL; alias = alias->next)
+ {
+ if (alias->addr == 0
+ && (!match || entry->level < match->level))
+ match = entry;
+ else if (alias->addr == K0BASE || alias->addr == K1BASE)
+ mapped = 1;
+ }
+ }
+ }
+
+ if (!mapped)
+ {
+ if (match)
+ {
+ /* Get existing memory region size. */
+ mem_size = (match->modulo != 0
+ ? match->modulo : match->nr_bytes);
+ /* Delete old region. */
+ sim_do_commandf (sd, "memory delete %d:0x%lx@%d",
+ match->space, match->addr, match->level);
+ }
+ else if (mem_size == 0)
+ mem_size = MEM_SIZE;
+ /* Limit to KSEG1 size (512MB) */
+ if (mem_size > K1SIZE)
+ mem_size = K1SIZE;
+ /* memory alias K1BASE@1,K1SIZE%MEMSIZE,K0BASE */
+ sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx%%0x%lx,0x%0x",
+ K1BASE, K1SIZE, (long)mem_size, K0BASE);
+ if (WITH_TARGET_WORD_BITSIZE == 64)
+ sim_do_commandf (sd, "memory alias 0x%x,0x%" PRIxTW ",0x%" PRIxTA,
+ (K0BASE), mem_size, EXTENDED(K0BASE));
+ }
+
device_init(sd);
}
else if (board != NULL
{
/* FIXME: poking at dv-sockser internals, use tcp backend if
--sockser_addr option was given.*/
+#ifdef HAVE_DV_SOCKSER
extern char* sockser_addr;
- if(sockser_addr == NULL)
+#else
+# define sockser_addr NULL
+#endif
+ if (sockser_addr == NULL)
sim_hw_parse (sd, "/tx3904sio@0xfffff300/backend stdio");
else
sim_hw_parse (sd, "/tx3904sio@0xfffff300/backend tcp");
}
#endif
+ if (display_mem_info)
+ {
+ struct option_list * ol;
+ struct option_list * prev;
+
+ /* This is a hack. We want to execute the real --memory-info command
+ line switch which is handled in common/sim-memopts.c, not the
+ override we have defined in this file. So we remove the
+ mips_options array from the state options list. This is safe
+ because we have now processed all of the command line. */
+ for (ol = STATE_OPTIONS (sd), prev = NULL;
+ ol != NULL;
+ prev = ol, ol = ol->next)
+ if (ol->options == mips_options)
+ break;
+
+ SIM_ASSERT (ol != NULL);
+
+ if (prev == NULL)
+ STATE_OPTIONS (sd) = ol->next;
+ else
+ prev->next = ol->next;
+
+ sim_do_commandf (sd, "memory-info");
+ }
/* check for/establish the a reference program image */
if (sim_analyze_program (sd,
{
if (rn < 32)
cpu->register_widths[rn] = WITH_TARGET_WORD_BITSIZE;
- else if ((rn >= FGRIDX) && (rn < (FGRIDX + NR_FGR)))
+ else if ((rn >= FGR_BASE) && (rn < (FGR_BASE + NR_FGR)))
cpu->register_widths[rn] = WITH_TARGET_FLOATING_POINT_BITSIZE;
else if ((rn >= 33) && (rn <= 37))
cpu->register_widths[rn] = WITH_TARGET_WORD_BITSIZE;
}
-#if defined(TRACE)
if (STATE & simTRACE)
open_trace(sd);
-#endif /* TRACE */
/*
sim_io_eprintf (sd, "idt@%x pmon@%x lsipmon@%x\n",
if (idt_monitor_base != 0)
{
unsigned loop;
- unsigned idt_monitor_size = 1 << 11;
+ address_word idt_monitor_size = 1 << 11;
/* the default monitor region */
- sim_do_commandf (sd, "memory region 0x%x,0x%x",
- idt_monitor_base, idt_monitor_size);
+ if (WITH_TARGET_WORD_BITSIZE == 64)
+ sim_do_commandf (sd, "memory alias 0x%x,0x%" PRIxTW ",0x%" PRIxTA,
+ idt_monitor_base, idt_monitor_size,
+ EXTENDED (idt_monitor_base));
+ else
+ sim_do_commandf (sd, "memory region 0x%x,0x%x",
+ idt_monitor_base, idt_monitor_size);
/* Entry into the IDT monitor is via fixed address vectors, and
not using machine instructions. To avoid clashing with use of
(((loop >> 2) & RSVD_INSTRUCTION_ARG_MASK)
<< RSVD_INSTRUCTION_ARG_SHIFT));
H2T (insn);
- sim_write (sd, vaddr, (char *)&insn, sizeof (insn));
+ sim_write (sd, vaddr, (unsigned char *)&insn, sizeof (insn));
}
}
if (pmon_monitor_base != 0)
{
address_word vaddr = (pmon_monitor_base + (loop * 4));
- sim_write (sd, vaddr, (char *)&value, sizeof (value));
+ sim_write (sd, vaddr, (unsigned char *)&value, sizeof (value));
}
if (lsipmon_monitor_base != 0)
{
address_word vaddr = (lsipmon_monitor_base + (loop * 4));
- sim_write (sd, vaddr, (char *)&value, sizeof (value));
+ sim_write (sd, vaddr, (unsigned char *)&value, sizeof (value));
}
}
HALT_INSTRUCTION /* BREAK */ };
H2T (halt[0]);
H2T (halt[1]);
- sim_write (sd, 0x80000000, (char *) halt, sizeof (halt));
- sim_write (sd, 0x80000180, (char *) halt, sizeof (halt));
- sim_write (sd, 0x80000200, (char *) halt, sizeof (halt));
+ sim_write (sd, 0x80000000, (unsigned char *) halt, sizeof (halt));
+ sim_write (sd, 0x80000180, (unsigned char *) halt, sizeof (halt));
+ sim_write (sd, 0x80000200, (unsigned char *) halt, sizeof (halt));
/* XXX: Write here unconditionally? */
- sim_write (sd, 0xBFC00200, (char *) halt, sizeof (halt));
- sim_write (sd, 0xBFC00380, (char *) halt, sizeof (halt));
- sim_write (sd, 0xBFC00400, (char *) halt, sizeof (halt));
+ sim_write (sd, 0xBFC00200, (unsigned char *) halt, sizeof (halt));
+ sim_write (sd, 0xBFC00380, (unsigned char *) halt, sizeof (halt));
+ sim_write (sd, 0xBFC00400, (unsigned char *) halt, sizeof (halt));
}
}
+ /* CPU specific initialization. */
+ for (i = 0; i < MAX_NR_PROCESSORS; ++i)
+ {
+ SIM_CPU *cpu = STATE_CPU (sd, i);
+ CPU_REG_FETCH (cpu) = mips_reg_fetch;
+ CPU_REG_STORE (cpu) = mips_reg_store;
+ CPU_PC_FETCH (cpu) = mips_pc_get;
+ CPU_PC_STORE (cpu) = mips_pc_set;
+ }
return sd;
}
-#if defined(TRACE)
+#if WITH_TRACE_ANY_P
static void
-open_trace(sd)
- SIM_DESC sd;
+open_trace (SIM_DESC sd)
{
tracefh = fopen(tracefile,"wb+");
if (tracefh == NULL)
tracefh = stderr;
}
}
-#endif /* TRACE */
+#endif
/* Return name of an insn, used by insn profiling. */
static const char *
}
void
-sim_close (sd, quitting)
- SIM_DESC sd;
- int quitting;
+mips_sim_close (SIM_DESC sd, int quitting)
{
-#ifdef DEBUG
- printf("DBG: sim_close: entered (quitting = %d)\n",quitting);
-#endif
-
-
- /* "quitting" is non-zero if we cannot hang on errors */
-
- /* shut down modules */
- sim_module_uninstall (sd);
-
- /* Ensure that any resources allocated through the callback
- mechanism are released: */
- sim_io_shutdown (sd);
-
-#if defined(TRACE)
+#if WITH_TRACE_ANY_P
if (tracefh != NULL && tracefh != stderr)
fclose(tracefh);
tracefh = NULL;
-#endif /* TRACE */
-
- /* FIXME - free SD */
-
- return;
-}
-
-
-int
-sim_write (sd,addr,buffer,size)
- SIM_DESC sd;
- SIM_ADDR addr;
- unsigned char *buffer;
- int size;
-{
- int index;
- sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */
-
- /* Return the number of bytes written, or zero if error. */
-#ifdef DEBUG
- sim_io_printf(sd,"sim_write(0x%s,buffer,%d);\n",pr_addr(addr),size);
#endif
-
- /* We use raw read and write routines, since we do not want to count
- the GDB memory accesses in our statistics gathering. */
-
- for (index = 0; index < size; index++)
- {
- address_word vaddr = (address_word)addr + index;
- address_word paddr;
- int cca;
- if (!address_translation (SD, CPU, NULL_CIA, vaddr, isDATA, isSTORE, &paddr, &cca, isRAW))
- break;
- if (sim_core_write_buffer (SD, CPU, read_map, buffer + index, paddr, 1) != 1)
- break;
- }
-
- return(index);
}
-int
-sim_read (sd,addr,buffer,size)
- SIM_DESC sd;
- SIM_ADDR addr;
- unsigned char *buffer;
- int size;
-{
- int index;
- sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */
-
- /* Return the number of bytes read, or zero if error. */
-#ifdef DEBUG
- sim_io_printf(sd,"sim_read(0x%s,buffer,%d);\n",pr_addr(addr),size);
-#endif /* DEBUG */
-
- for (index = 0; (index < size); index++)
- {
- address_word vaddr = (address_word)addr + index;
- address_word paddr;
- int cca;
- if (!address_translation (SD, CPU, NULL_CIA, vaddr, isDATA, isLOAD, &paddr, &cca, isRAW))
- break;
- if (sim_core_read_buffer (SD, CPU, read_map, buffer + index, paddr, 1) != 1)
- break;
- }
-
- return(index);
-}
-
-int
-sim_store_register (sd,rn,memory,length)
- SIM_DESC sd;
- int rn;
- unsigned char *memory;
- int length;
+static int
+mips_reg_store (SIM_CPU *cpu, int rn, unsigned char *memory, int length)
{
- sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */
/* NOTE: gdb (the client) stores registers in target byte order
while the simulator uses host byte order */
-#ifdef DEBUG
- sim_io_printf(sd,"sim_store_register(%d,*memory=0x%s);\n",rn,pr_addr(*((SIM_ADDR *)memory)));
-#endif /* DEBUG */
/* Unfortunately this suffers from the same problem as the register
numbering one. We need to know what the width of each logical
if (cpu->register_widths[rn] == 0)
{
- sim_io_eprintf(sd,"Invalid register width for %d (register store ignored)\n",rn);
+ sim_io_eprintf (CPU_STATE (cpu), "Invalid register width for %d (register store ignored)\n", rn);
return 0;
}
-
-
- if (rn >= FGRIDX && rn < FGRIDX + NR_FGR)
+ if (rn >= FGR_BASE && rn < FGR_BASE + NR_FGR)
{
- cpu->fpr_state[rn - FGRIDX] = fmt_uninterpreted;
+ cpu->fpr_state[rn - FGR_BASE] = fmt_uninterpreted;
if (cpu->register_widths[rn] == 32)
{
if (length == 8)
{
- cpu->fgr[rn - FGRIDX] =
+ cpu->fgr[rn - FGR_BASE] =
(unsigned32) T2H_8 (*(unsigned64*)memory);
return 8;
}
else
{
- cpu->fgr[rn - FGRIDX] = T2H_4 (*(unsigned32*)memory);
+ cpu->fgr[rn - FGR_BASE] = T2H_4 (*(unsigned32*)memory);
return 4;
}
}
else
{
- cpu->fgr[rn - FGRIDX] = T2H_8 (*(unsigned64*)memory);
- return 8;
+ if (length == 8)
+ {
+ cpu->fgr[rn - FGR_BASE] = T2H_8 (*(unsigned64*)memory);
+ return 8;
+ }
+ else
+ {
+ cpu->fgr[rn - FGR_BASE] = T2H_4 (*(unsigned32*)memory);
+ return 4;
+ }
}
}
}
else
{
- cpu->registers[rn] = T2H_8 (*(unsigned64*)memory);
- return 8;
+ if (length == 8)
+ {
+ cpu->registers[rn] = T2H_8 (*(unsigned64*)memory);
+ return 8;
+ }
+ else
+ {
+ cpu->registers[rn] = (signed32) T2H_4(*(unsigned32*)memory);
+ return 4;
+ }
}
return 0;
}
-int
-sim_fetch_register (sd,rn,memory,length)
- SIM_DESC sd;
- int rn;
- unsigned char *memory;
- int length;
+static int
+mips_reg_fetch (SIM_CPU *cpu, int rn, unsigned char *memory, int length)
{
- sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */
/* NOTE: gdb (the client) stores registers in target byte order
while the simulator uses host byte order */
-#ifdef DEBUG
-#if 0 /* FIXME: doesn't compile */
- sim_io_printf(sd,"sim_fetch_register(%d=0x%s,mem) : place simulator registers into memory\n",rn,pr_addr(registers[rn]));
-#endif
-#endif /* DEBUG */
if (cpu->register_widths[rn] == 0)
{
- sim_io_eprintf (sd, "Invalid register width for %d (register fetch ignored)\n",rn);
+ sim_io_eprintf (CPU_STATE (cpu), "Invalid register width for %d (register fetch ignored)\n", rn);
return 0;
}
-
-
/* Any floating point register */
- if (rn >= FGRIDX && rn < FGRIDX + NR_FGR)
+ if (rn >= FGR_BASE && rn < FGR_BASE + NR_FGR)
{
if (cpu->register_widths[rn] == 32)
{
if (length == 8)
{
*(unsigned64*)memory =
- H2T_8 ((unsigned32) (cpu->fgr[rn - FGRIDX]));
+ H2T_8 ((unsigned32) (cpu->fgr[rn - FGR_BASE]));
return 8;
}
else
{
- *(unsigned32*)memory = H2T_4 (cpu->fgr[rn - FGRIDX]);
+ *(unsigned32*)memory = H2T_4 (cpu->fgr[rn - FGR_BASE]);
return 4;
}
}
else
{
- *(unsigned64*)memory = H2T_8 (cpu->fgr[rn - FGRIDX]);
- return 8;
+ if (length == 8)
+ {
+ *(unsigned64*)memory = H2T_8 (cpu->fgr[rn - FGR_BASE]);
+ return 8;
+ }
+ else
+ {
+ *(unsigned32*)memory = H2T_4 ((unsigned32)(cpu->fgr[rn - FGR_BASE]));
+ return 4;
+ }
}
}
}
else
{
- *(unsigned64*)memory = H2T_8 ((unsigned64)(cpu->registers[rn]));
- return 8;
+ if (length == 8)
+ {
+ *(unsigned64*)memory =
+ H2T_8 ((unsigned64) (cpu->registers[rn]));
+ return 8;
+ }
+ else
+ {
+ *(unsigned32*)memory = H2T_4 ((unsigned32)(cpu->registers[rn]));
+ return 4;
+ }
}
return 0;
}
-
SIM_RC
-sim_create_inferior (sd, abfd, argv,env)
- SIM_DESC sd;
- struct _bfd *abfd;
- char **argv;
- char **env;
+sim_create_inferior (SIM_DESC sd, struct bfd *abfd,
+ char * const *argv, char * const *env)
{
#ifdef DEBUG
for (cpu_nr = 0; cpu_nr < sim_engine_nr_cpus (sd); cpu_nr++)
{
sim_cpu *cpu = STATE_CPU (sd, cpu_nr);
- CIA_SET (cpu, (unsigned64) bfd_get_start_address (abfd));
+ sim_cia pc = bfd_get_start_address (abfd);
+
+ /* The 64-bit BFD sign-extends MIPS addresses to model
+ 32-bit compatibility segments with 64-bit addressing.
+ These addresses work as is on 64-bit targets but
+ can be truncated for 32-bit targets. */
+ if (WITH_TARGET_WORD_BITSIZE == 32)
+ pc = (unsigned32) pc;
+
+ CPU_PC_SET (cpu, pc);
}
}
return SIM_RC_OK;
}
-void
-sim_do_command (sd,cmd)
- SIM_DESC sd;
- char *cmd;
-{
- if (sim_args_command (sd, cmd) != SIM_RC_OK)
- sim_io_printf (sd, "Error: \"%s\" is not a valid MIPS simulator command.\n",
- cmd);
-}
-
/*---------------------------------------------------------------------------*/
/*-- Private simulator support interface ------------------------------------*/
/*---------------------------------------------------------------------------*/
{
char *buf;
int nr = 0;
- char null;
+ unsigned char null;
while (sim_read (sd, addr + nr, &null, 1) == 1 && null != 0)
nr++;
buf = NZALLOC (char, nr + 1);
- sim_read (sd, addr, buf, nr);
+ sim_read (sd, addr, (unsigned char *)buf, nr);
return buf;
}
}
}
else
- address_present = 0;
+ {
+ address_present = 0;
+ address = -1; /* Dummy value. */
+ }
}
if (! strncmp (arg, "idt", 3))
return SIM_RC_OK;
}
+/* stat structures from MIPS32/64. */
+static const char stat32_map[] =
+"st_dev,2:st_ino,2:st_mode,4:st_nlink,2:st_uid,2:st_gid,2"
+":st_rdev,2:st_size,4:st_atime,4:st_spare1,4:st_mtime,4:st_spare2,4"
+":st_ctime,4:st_spare3,4:st_blksize,4:st_blocks,4:st_spare4,8";
+
+static const char stat64_map[] =
+"st_dev,2:st_ino,2:st_mode,4:st_nlink,2:st_uid,2:st_gid,2"
+":st_rdev,2:st_size,8:st_atime,8:st_spare1,8:st_mtime,8:st_spare2,8"
+":st_ctime,8:st_spare3,8:st_blksize,8:st_blocks,8:st_spare4,16";
+
+/* Map for calls using the host struct stat. */
+static const CB_TARGET_DEFS_MAP CB_stat_map[] =
+{
+ { "stat", CB_SYS_stat, 15 },
+ { 0, -1, -1 }
+};
/* Simple monitor interface (currently setup for the IDT and PMON monitors) */
/* The following callback functions are available, however the
monitor we are simulating does not make use of them: get_errno,
- isatty, lseek, rename, system, time and unlink */
+ isatty, rename, system and time. */
switch (reason)
{
{
char *path = fetch_str (sd, A0);
V0 = sim_io_open (sd, path, (int)A1);
- zfree (path);
+ free (path);
break;
}
int nr = A2;
char *buf = zalloc (nr);
V0 = sim_io_read (sd, fd, buf, nr);
- sim_write (sd, A1, buf, nr);
- zfree (buf);
+ sim_write (sd, A1, (unsigned char *)buf, nr);
+ free (buf);
}
break;
int fd = A0;
int nr = A2;
char *buf = zalloc (nr);
- sim_read (sd, A1, buf, nr);
+ sim_read (sd, A1, (unsigned char *)buf, nr);
V0 = sim_io_write (sd, fd, buf, nr);
- zfree (buf);
+ if (fd == 1)
+ sim_io_flush_stdout (sd);
+ else if (fd == 2)
+ sim_io_flush_stderr (sd);
+ free (buf);
break;
}
break;
}
+ case 13: /* int unlink(const char *path) */
+ {
+ char *path = fetch_str (sd, A0);
+ V0 = sim_io_unlink (sd, path);
+ free (path);
+ break;
+ }
+
+ case 14: /* int lseek(int fd, int offset, int whence) */
+ {
+ V0 = sim_io_lseek (sd, A0, A1, A2);
+ break;
+ }
+
+ case 15: /* int stat(const char *path, struct stat *buf); */
+ {
+ /* As long as the infrastructure doesn't cache anything
+ related to the stat mapping, this trick gets us a dual
+ "struct stat"-type mapping in the least error-prone way. */
+ host_callback *cb = STATE_CALLBACK (sd);
+ const char *saved_map = cb->stat_map;
+ CB_TARGET_DEFS_MAP *saved_syscall_map = cb->syscall_map;
+ bfd *prog_bfd = STATE_PROG_BFD (sd);
+ int is_elf32bit = (elf_elfheader(prog_bfd)->e_ident[EI_CLASS] ==
+ ELFCLASS32);
+ static CB_SYSCALL s;
+ CB_SYSCALL_INIT (&s);
+ s.func = 15;
+ /* Mask out the sign extension part for 64-bit targets because the
+ MIPS simulator's memory model is still 32-bit. */
+ s.arg1 = A0 & 0xFFFFFFFF;
+ s.arg2 = A1 & 0xFFFFFFFF;
+ s.p1 = (PTR) sd;
+ s.p2 = (PTR) cpu;
+ s.read_mem = sim_syscall_read_mem;
+ s.write_mem = sim_syscall_write_mem;
+
+ cb->syscall_map = (CB_TARGET_DEFS_MAP *) CB_stat_map;
+ cb->stat_map = is_elf32bit ? stat32_map : stat64_map;
+
+ if (cb_syscall (cb, &s) != CB_RC_OK)
+ sim_engine_halt (sd, cpu, NULL, mips_pc_get (cpu),
+ sim_stopped, SIM_SIGILL);
+
+ V0 = s.result;
+ cb->stat_map = saved_map;
+ cb->syscall_map = saved_syscall_map;
+ break;
+ }
+
case 17: /* void _exit() */
{
sim_io_eprintf (sd, "sim_monitor(17): _exit(int reason) to be coded\n");
break;
}
- case 28 : /* PMON flush_cache */
+ case 28: /* PMON flush_cache */
break;
case 55: /* void get_mem_info(unsigned int *ptr) */
/* [A0 + 4] = instruction cache size */
/* [A0 + 8] = data cache size */
{
- unsigned_4 value = MEM_SIZE /* FIXME STATE_MEM_SIZE (sd) */;
+ unsigned_4 value;
unsigned_4 zero = 0;
+ address_word mem_size;
+ sim_memopt *entry, *match = NULL;
+
+ /* Search for memory region mapped to KSEG0 or KSEG1. */
+ for (entry = STATE_MEMOPT (sd);
+ entry != NULL;
+ entry = entry->next)
+ {
+ if ((entry->addr == K0BASE || entry->addr == K1BASE)
+ && (!match || entry->level < match->level))
+ match = entry;
+ else
+ {
+ sim_memopt *alias;
+ for (alias = entry->alias;
+ alias != NULL;
+ alias = alias->next)
+ if ((alias->addr == K0BASE || alias->addr == K1BASE)
+ && (!match || entry->level < match->level))
+ match = entry;
+ }
+ }
+
+ /* Get region size, limit to KSEG1 size (512MB). */
+ SIM_ASSERT (match != NULL);
+ mem_size = (match->modulo != 0
+ ? match->modulo : match->nr_bytes);
+ if (mem_size > K1SIZE)
+ mem_size = K1SIZE;
+
+ value = mem_size;
H2T (value);
- sim_write (sd, A0 + 0, (char *)&value, 4);
- sim_write (sd, A0 + 4, (char *)&zero, 4);
- sim_write (sd, A0 + 8, (char *)&zero, 4);
- /* sim_io_eprintf (sd, "sim: get_mem_info() depreciated\n"); */
+ sim_write (sd, A0 + 0, (unsigned char *)&value, 4);
+ sim_write (sd, A0 + 4, (unsigned char *)&zero, 4);
+ sim_write (sd, A0 + 8, (unsigned char *)&zero, 4);
+ /* sim_io_eprintf (sd, "sim: get_mem_info() deprecated\n"); */
break;
}
- case 158 : /* PMON printf */
+ case 158: /* PMON printf */
/* in: A0 = pointer to format string */
/* A1 = optional argument 1 */
/* A2 = optional argument 2 */
/* The following is based on the PMON printf source */
{
address_word s = A0;
- char c;
+ unsigned char c;
signed_word *ap = &A1; /* 1st argument */
/* This isn't the quickest way, since we call the host print
routine for every character almost. But it does avoid
if ((int)*ap != 0)
{
address_word p = *ap++;
- char ch;
+ unsigned char ch;
while (sim_read (sd, p++, &ch, 1) == 1 && ch != '\0')
sim_io_printf(sd, "%c", ch);
}
uword64 vaddr,
signed_word val)
{
- address_word paddr;
- int uncached;
+ address_word paddr = vaddr;
if ((vaddr & 3) != 0)
SignalExceptionAddressStore ();
else
{
- if (AddressTranslation (vaddr, isDATA, isSTORE, &paddr, &uncached,
- isTARGET, isREAL))
- {
- const uword64 mask = 7;
- uword64 memval;
- unsigned int byte;
-
- paddr = (paddr & ~mask) | ((paddr & mask) ^ (ReverseEndian << 2));
- byte = (vaddr & mask) ^ (BigEndianCPU << 2);
- memval = ((uword64) val) << (8 * byte);
- StoreMemory (uncached, AccessLength_WORD, memval, 0, paddr, vaddr,
- isREAL);
- }
+ const uword64 mask = 7;
+ uword64 memval;
+ unsigned int byte;
+
+ paddr = (paddr & ~mask) | ((paddr & mask) ^ (ReverseEndian << 2));
+ byte = (vaddr & mask) ^ (BigEndianCPU << 2);
+ memval = ((uword64) val) << (8 * byte);
+ StoreMemory (AccessLength_WORD, memval, 0, paddr, vaddr,
+ isREAL);
}
}
}
else
{
- address_word paddr;
- int uncached;
+ address_word paddr = vaddr;
+ const uword64 mask = 0x7;
+ const unsigned int reverse = ReverseEndian ? 1 : 0;
+ const unsigned int bigend = BigEndianCPU ? 1 : 0;
+ uword64 memval;
+ unsigned int byte;
- if (AddressTranslation (vaddr, isDATA, isLOAD, &paddr, &uncached,
- isTARGET, isREAL))
- {
- const uword64 mask = 0x7;
- const unsigned int reverse = ReverseEndian ? 1 : 0;
- const unsigned int bigend = BigEndianCPU ? 1 : 0;
- uword64 memval;
- unsigned int byte;
-
- paddr = (paddr & ~mask) | ((paddr & mask) ^ (reverse << 2));
- LoadMemory (&memval,NULL,uncached, AccessLength_WORD, paddr, vaddr,
- isDATA, isREAL);
- byte = (vaddr & mask) ^ (bigend << 2);
- return SIGNEXTEND (((memval >> (8 * byte)) & 0xffffffff), 32);
- }
+ paddr = (paddr & ~mask) | ((paddr & mask) ^ (reverse << 2));
+ LoadMemory (&memval, NULL, AccessLength_WORD, paddr, vaddr, isDATA,
+ isREAL);
+ byte = (vaddr & mask) ^ (bigend << 2);
+ return EXTEND32 (memval >> (8 * byte));
}
return 0;
/*-- trace support ----------------------------------------------------------*/
-/* The TRACE support is provided (if required) in the memory accessing
+/* The trace support is provided (if required) in the memory accessing
routines. Since we are also providing the architecture specific
features, the architecture simulation code can also deal with
- notifying the TRACE world of cache flushes, etc. Similarly we do
+ notifying the trace world of cache flushes, etc. Similarly we do
not need to provide profiling support in the simulator engine,
since we can sample in the instruction fetch control loop. By
- defining the TRACE manifest, we add tracing as a run-time
+ defining the trace manifest, we add tracing as a run-time
option. */
-#if defined(TRACE)
+#if WITH_TRACE_ANY_P
/* Tracing by default produces "din" format (as required by
dineroIII). Each line of such a trace file *MUST* have a din label
and address field. The rest of the line is ignored, so comments can
return;
}
-#endif /* TRACE */
+#endif /* WITH_TRACE_ANY_P */
/*---------------------------------------------------------------------------*/
/*-- simulator engine -------------------------------------------------------*/
FPR_STATE[rn] = fmt_uninterpreted;
}
+ /* Initialise the Config0 register. */
+ C0_CONFIG = 0x80000000 /* Config1 present */
+ | 2; /* KSEG0 uncached */
+ if (WITH_TARGET_WORD_BITSIZE == 64)
+ {
+ /* FIXME Currently mips/sim-main.c:address_translation()
+ truncates all addresses to 32-bits. */
+ if (0 && WITH_TARGET_ADDRESS_BITSIZE == 64)
+ C0_CONFIG |= (2 << 13); /* MIPS64, 64-bit addresses */
+ else
+ C0_CONFIG |= (1 << 13); /* MIPS64, 32-bit addresses */
+ }
+ if (BigEndianMem)
+ C0_CONFIG |= 0x00008000; /* Big Endian */
}
}
switch (exception) {
- case DebugBreakPoint :
+ case DebugBreakPoint:
if (! (Debug & Debug_DM))
{
if (INDELAYSLOT())
}
break;
- case ReservedInstruction :
+ case ReservedInstruction:
{
va_list ap;
unsigned int instruction;
#ifdef SUBTARGET_3900
/* Exception vector: BEV=0 BFC00000 / BEF=1 BFC00000 */
PC = (signed)0xBFC00000;
-#endif SUBTARGET_3900
+#endif /* SUBTARGET_3900 */
return;
case TLBModification:
sim_engine_halt (SD, CPU, NULL, PC,
sim_stopped, SIM_SIGTRAP);
- default : /* Unknown internal exception */
+ default: /* Unknown internal exception */
PC = EPC;
sim_engine_halt (SD, CPU, NULL, PC,
sim_stopped, SIM_SIGABRT);
-#if defined(WARN_RESULT)
-/* Description from page A-26 of the "MIPS IV Instruction Set" manual (revision 3.1) */
-/* This function indicates that the result of the operation is
- undefined. However, this should not affect the instruction
- stream. All that is meant to happen is that the destination
- register is set to an undefined result. To keep the simulator
- simple, we just don't bother updating the destination register, so
- the overall result will be undefined. If desired we can stop the
- simulator by raising a pseudo-exception. */
-#define UndefinedResult() undefined_result (sd,cia)
-static void
-undefined_result(sd,cia)
- SIM_DESC sd;
- address_word cia;
-{
- sim_io_eprintf(sd,"UndefinedResult: PC = 0x%s\n",pr_addr(cia));
-#if 0 /* Disabled for the moment, since it actually happens a lot at the moment. */
- state |= simSTOP;
-#endif
- return;
-}
-#endif /* WARN_RESULT */
-
-/*-- FPU support routines ---------------------------------------------------*/
-
-/* Numbers are held in normalized form. The SINGLE and DOUBLE binary
- formats conform to ANSI/IEEE Std 754-1985. */
-/* SINGLE precision floating:
- * seeeeeeeefffffffffffffffffffffff
- * s = 1bit = sign
- * e = 8bits = exponent
- * f = 23bits = fraction
- */
-/* SINGLE precision fixed:
- * siiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
- * s = 1bit = sign
- * i = 31bits = integer
- */
-/* DOUBLE precision floating:
- * seeeeeeeeeeeffffffffffffffffffffffffffffffffffffffffffffffffffff
- * s = 1bit = sign
- * e = 11bits = exponent
- * f = 52bits = fraction
- */
-/* DOUBLE precision fixed:
- * siiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
- * s = 1bit = sign
- * i = 63bits = integer
- */
-
-/* Extract sign-bit: */
-#define FP_S_s(v) (((v) & ((unsigned)1 << 31)) ? 1 : 0)
-#define FP_D_s(v) (((v) & ((uword64)1 << 63)) ? 1 : 0)
-/* Extract biased exponent: */
-#define FP_S_be(v) (((v) >> 23) & 0xFF)
-#define FP_D_be(v) (((v) >> 52) & 0x7FF)
-/* Extract unbiased Exponent: */
-#define FP_S_e(v) (FP_S_be(v) - 0x7F)
-#define FP_D_e(v) (FP_D_be(v) - 0x3FF)
-/* Extract complete fraction field: */
-#define FP_S_f(v) ((v) & ~((unsigned)0x1FF << 23))
-#define FP_D_f(v) ((v) & ~((uword64)0xFFF << 52))
-/* Extract numbered fraction bit: */
-#define FP_S_fb(b,v) (((v) & (1 << (23 - (b)))) ? 1 : 0)
-#define FP_D_fb(b,v) (((v) & (1 << (52 - (b)))) ? 1 : 0)
-
-/* Explicit QNaN values used when value required: */
-#define FPQNaN_SINGLE (0x7FBFFFFF)
-#define FPQNaN_WORD (0x7FFFFFFF)
-#define FPQNaN_DOUBLE (((uword64)0x7FF7FFFF << 32) | 0xFFFFFFFF)
-#define FPQNaN_LONG (((uword64)0x7FFFFFFF << 32) | 0xFFFFFFFF)
-
-/* Explicit Infinity values used when required: */
-#define FPINF_SINGLE (0x7F800000)
-#define FPINF_DOUBLE (((uword64)0x7FF00000 << 32) | 0x00000000)
-
-#define RMMODE(v) (((v) == FP_RM_NEAREST) ? "Round" : (((v) == FP_RM_TOZERO) ? "Trunc" : (((v) == FP_RM_TOPINF) ? "Ceil" : "Floor")))
-#define DOFMT(v) (((v) == fmt_single) ? "single" : (((v) == fmt_double) ? "double" : (((v) == fmt_word) ? "word" : (((v) == fmt_long) ? "long" : (((v) == fmt_unknown) ? "<unknown>" : (((v) == fmt_uninterpreted) ? "<uninterpreted>" : (((v) == fmt_uninterpreted_32) ? "<uninterpreted_32>" : (((v) == fmt_uninterpreted_64) ? "<uninterpreted_64>" : "<format error>"))))))))
-
-uword64
-value_fpr (SIM_DESC sd,
- sim_cpu *cpu,
- address_word cia,
- int fpr,
- FP_formats fmt)
-{
- uword64 value = 0;
- int err = 0;
-
- /* Treat unused register values, as fixed-point 64bit values: */
- if ((fmt == fmt_uninterpreted) || (fmt == fmt_unknown))
-#if 1
- /* If request to read data as "uninterpreted", then use the current
- encoding: */
- fmt = FPR_STATE[fpr];
-#else
- fmt = fmt_long;
-#endif
-
- /* For values not yet accessed, set to the desired format: */
- if (FPR_STATE[fpr] == fmt_uninterpreted) {
- FPR_STATE[fpr] = fmt;
-#ifdef DEBUG
- printf("DBG: Register %d was fmt_uninterpreted. Now %s\n",fpr,DOFMT(fmt));
-#endif /* DEBUG */
- }
- if (fmt != FPR_STATE[fpr]) {
- sim_io_eprintf(sd,"FPR %d (format %s) being accessed with format %s - setting to unknown (PC = 0x%s)\n",fpr,DOFMT(FPR_STATE[fpr]),DOFMT(fmt),pr_addr(cia));
- FPR_STATE[fpr] = fmt_unknown;
- }
-
- if (FPR_STATE[fpr] == fmt_unknown) {
- /* Set QNaN value: */
- switch (fmt) {
- case fmt_single:
- value = FPQNaN_SINGLE;
- break;
+/* This function implements what the MIPS32 and MIPS64 ISAs define as
+ "UNPREDICTABLE" behaviour.
- case fmt_double:
- value = FPQNaN_DOUBLE;
- break;
+ About UNPREDICTABLE behaviour they say: "UNPREDICTABLE results
+ may vary from processor implementation to processor implementation,
+ instruction to instruction, or as a function of time on the same
+ implementation or instruction. Software can never depend on results
+ that are UNPREDICTABLE. ..." (MIPS64 Architecture for Programmers
+ Volume II, The MIPS64 Instruction Set. MIPS Document MD00087 revision
+ 0.95, page 2.)
+
+ For UNPREDICTABLE behaviour, we print a message, if possible print
+ the offending instructions mips.igen instruction name (provided by
+ the caller), and stop the simulator.
- case fmt_word:
- value = FPQNaN_WORD;
- break;
+ XXX FIXME: eventually, stopping the simulator should be made conditional
+ on a command-line option. */
+void
+unpredictable_action(sim_cpu *cpu, address_word cia)
+{
+ SIM_DESC sd = CPU_STATE(cpu);
- case fmt_long:
- value = FPQNaN_LONG;
- break;
+ sim_io_eprintf(sd, "UNPREDICTABLE: PC = 0x%s\n", pr_addr (cia));
+ sim_engine_halt (SD, CPU, NULL, cia, sim_stopped, SIM_SIGABRT);
+}
- default:
- err = -1;
- break;
- }
- } else if (SizeFGR() == 64) {
- switch (fmt) {
- case fmt_single:
- case fmt_word:
- value = (FGR[fpr] & 0xFFFFFFFF);
- break;
- case fmt_uninterpreted:
- case fmt_double:
- case fmt_long:
- value = FGR[fpr];
- break;
+/*-- co-processor support routines ------------------------------------------*/
- default :
- err = -1;
- break;
- }
- } else {
- switch (fmt) {
- case fmt_single:
- case fmt_word:
- value = (FGR[fpr] & 0xFFFFFFFF);
- break;
+static int UNUSED
+CoProcPresent(unsigned int coproc_number)
+{
+ /* Return TRUE if simulator provides a model for the given co-processor number */
+ return(0);
+}
- case fmt_uninterpreted:
- case fmt_double:
- case fmt_long:
- if ((fpr & 1) == 0) { /* even registers only */
+void
+cop_lw (SIM_DESC sd,
+ sim_cpu *cpu,
+ address_word cia,
+ int coproc_num,
+ int coproc_reg,
+ unsigned int memword)
+{
+ switch (coproc_num)
+ {
+ case 1:
+ if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT)
+ {
#ifdef DEBUG
- printf("DBG: ValueFPR: FGR[%d] = %s, FGR[%d] = %s\n",
- fpr+1, pr_uword64( (uword64) FGR[fpr+1] ),
- fpr, pr_uword64( (uword64) FGR[fpr] ));
+ printf("DBG: COP_LW: memword = 0x%08X (uword64)memword = 0x%s\n",memword,pr_addr(memword));
#endif
- value = ((((uword64)FGR[fpr+1]) << 32) | (FGR[fpr] & 0xFFFFFFFF));
- } else {
- SignalException(ReservedInstruction,0);
- }
- break;
+ StoreFPR(coproc_reg,fmt_uninterpreted_32,(uword64)memword);
+ break;
+ }
- default :
- err = -1;
+ default:
+#if 0 /* this should be controlled by a configuration option */
+ sim_io_printf(sd,"COP_LW(%d,%d,0x%08X) at PC = 0x%s : TODO (architecture specific)\n",coproc_num,coproc_reg,memword,pr_addr(cia));
+#endif
break;
}
- }
-
- if (err)
- SignalExceptionSimulatorFault ("Unrecognised FP format in ValueFPR()");
-
-#ifdef DEBUG
- printf("DBG: ValueFPR: fpr = %d, fmt = %s, value = 0x%s : PC = 0x%s : SizeFGR() = %d\n",fpr,DOFMT(fmt),pr_uword64(value),pr_addr(cia),SizeFGR());
-#endif /* DEBUG */
- return(value);
-}
-
-void
-store_fpr (SIM_DESC sd,
- sim_cpu *cpu,
- address_word cia,
- int fpr,
- FP_formats fmt,
- uword64 value)
-{
- int err = 0;
-
-#ifdef DEBUG
- printf("DBG: StoreFPR: fpr = %d, fmt = %s, value = 0x%s : PC = 0x%s : SizeFGR() = %d,\n",fpr,DOFMT(fmt),pr_uword64(value),pr_addr(cia),SizeFGR());
-#endif /* DEBUG */
-
- if (SizeFGR() == 64) {
- switch (fmt) {
- case fmt_uninterpreted_32:
- fmt = fmt_uninterpreted;
- case fmt_single :
- case fmt_word :
- if (STATE_VERBOSE_P(SD))
- sim_io_eprintf (SD, "Warning: PC 0x%s: interp.c store_fpr DEADCODE\n",
- pr_addr(cia));
- FGR[fpr] = (((uword64)0xDEADC0DE << 32) | (value & 0xFFFFFFFF));
- FPR_STATE[fpr] = fmt;
- break;
-
- case fmt_uninterpreted_64:
- fmt = fmt_uninterpreted;
- case fmt_uninterpreted:
- case fmt_double :
- case fmt_long :
- FGR[fpr] = value;
- FPR_STATE[fpr] = fmt;
- break;
-
- default :
- FPR_STATE[fpr] = fmt_unknown;
- err = -1;
- break;
- }
- } else {
- switch (fmt) {
- case fmt_uninterpreted_32:
- fmt = fmt_uninterpreted;
- case fmt_single :
- case fmt_word :
- FGR[fpr] = (value & 0xFFFFFFFF);
- FPR_STATE[fpr] = fmt;
- break;
-
- case fmt_uninterpreted_64:
- fmt = fmt_uninterpreted;
- case fmt_uninterpreted:
- case fmt_double :
- case fmt_long :
- if ((fpr & 1) == 0) { /* even register number only */
- FGR[fpr+1] = (value >> 32);
- FGR[fpr] = (value & 0xFFFFFFFF);
- FPR_STATE[fpr + 1] = fmt;
- FPR_STATE[fpr] = fmt;
- } else {
- FPR_STATE[fpr] = fmt_unknown;
- FPR_STATE[fpr + 1] = fmt_unknown;
- SignalException(ReservedInstruction,0);
- }
- break;
-
- default :
- FPR_STATE[fpr] = fmt_unknown;
- err = -1;
- break;
- }
- }
-#if defined(WARN_RESULT)
- else
- UndefinedResult();
-#endif /* WARN_RESULT */
-
- if (err)
- SignalExceptionSimulatorFault ("Unrecognised FP format in StoreFPR()");
-
-#ifdef DEBUG
- printf("DBG: StoreFPR: fpr[%d] = 0x%s (format %s)\n",fpr,pr_uword64(FGR[fpr]),DOFMT(fmt));
-#endif /* DEBUG */
-
- return;
-}
-
-int
-NaN(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- int boolean = 0;
- switch (fmt) {
- case fmt_single:
- case fmt_word:
- {
- sim_fpu wop;
- sim_fpu_32to (&wop, op);
- boolean = sim_fpu_is_nan (&wop);
- break;
- }
- case fmt_double:
- case fmt_long:
- {
- sim_fpu wop;
- sim_fpu_64to (&wop, op);
- boolean = sim_fpu_is_nan (&wop);
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
-printf("DBG: NaN: returning %d for 0x%s (format = %s)\n",boolean,pr_addr(op),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(boolean);
-}
-
-int
-Infinity(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- int boolean = 0;
-
-#ifdef DEBUG
- printf("DBG: Infinity: format %s 0x%s\n",DOFMT(fmt),pr_addr(op));
-#endif /* DEBUG */
-
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop;
- sim_fpu_32to (&wop, op);
- boolean = sim_fpu_is_infinity (&wop);
- break;
- }
- case fmt_double:
- {
- sim_fpu wop;
- sim_fpu_64to (&wop, op);
- boolean = sim_fpu_is_infinity (&wop);
- break;
- }
- default:
- printf("DBG: TODO: unrecognised format (%s) for Infinity check\n",DOFMT(fmt));
- break;
- }
-
-#ifdef DEBUG
- printf("DBG: Infinity: returning %d for 0x%s (format = %s)\n",boolean,pr_addr(op),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(boolean);
-}
-
-int
-Less(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- int boolean = 0;
-
- /* Argument checking already performed by the FPCOMPARE code */
-
-#ifdef DEBUG
- printf("DBG: Less: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- boolean = sim_fpu_is_lt (&wop1, &wop2);
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- boolean = sim_fpu_is_lt (&wop1, &wop2);
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Less: returning %d (format = %s)\n",boolean,DOFMT(fmt));
-#endif /* DEBUG */
-
- return(boolean);
-}
-
-int
-Equal(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- int boolean = 0;
-
- /* Argument checking already performed by the FPCOMPARE code */
-
-#ifdef DEBUG
- printf("DBG: Equal: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- boolean = sim_fpu_is_eq (&wop1, &wop2);
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- boolean = sim_fpu_is_eq (&wop1, &wop2);
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Equal: returning %d (format = %s)\n",boolean,DOFMT(fmt));
-#endif /* DEBUG */
-
- return(boolean);
-}
-
-uword64
-AbsoluteValue(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: AbsoluteValue: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op));
-#endif /* DEBUG */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop;
- unsigned32 ans;
- sim_fpu_32to (&wop, op);
- sim_fpu_abs (&wop, &wop);
- sim_fpu_to32 (&ans, &wop);
- result = ans;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop;
- unsigned64 ans;
- sim_fpu_64to (&wop, op);
- sim_fpu_abs (&wop, &wop);
- sim_fpu_to64 (&ans, &wop);
- result = ans;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- return(result);
-}
-
-uword64
-Negate(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Negate: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op));
-#endif /* DEBUG */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop;
- unsigned32 ans;
- sim_fpu_32to (&wop, op);
- sim_fpu_neg (&wop, &wop);
- sim_fpu_to32 (&ans, &wop);
- result = ans;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop;
- unsigned64 ans;
- sim_fpu_64to (&wop, op);
- sim_fpu_neg (&wop, &wop);
- sim_fpu_to64 (&ans, &wop);
- result = ans;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- return(result);
-}
-
-uword64
-Add(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Add: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- sim_fpu_add (&ans, &wop1, &wop2);
- sim_fpu_to32 (&res, &ans);
- result = res;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- sim_fpu_add (&ans, &wop1, &wop2);
- sim_fpu_to64 (&res, &ans);
- result = res;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Add: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-uword64
-Sub(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Sub: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- sim_fpu_sub (&ans, &wop1, &wop2);
- sim_fpu_to32 (&res, &ans);
- result = res;
- }
- break;
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- sim_fpu_sub (&ans, &wop1, &wop2);
- sim_fpu_to64 (&res, &ans);
- result = res;
- }
- break;
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Sub: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-uword64
-Multiply(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Multiply: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- sim_fpu_mul (&ans, &wop1, &wop2);
- sim_fpu_to32 (&res, &ans);
- result = res;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- sim_fpu_mul (&ans, &wop1, &wop2);
- sim_fpu_to64 (&res, &ans);
- result = res;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Multiply: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-uword64
-Divide(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Divide: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- sim_fpu_div (&ans, &wop1, &wop2);
- sim_fpu_to32 (&res, &ans);
- result = res;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- sim_fpu_div (&ans, &wop1, &wop2);
- sim_fpu_to64 (&res, &ans);
- result = res;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Divide: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-uword64 UNUSED
-Recip(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Recip: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop, op);
- sim_fpu_inv (&ans, &wop);
- sim_fpu_to32 (&res, &ans);
- result = res;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop, op);
- sim_fpu_inv (&ans, &wop);
- sim_fpu_to64 (&res, &ans);
- result = res;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Recip: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-uword64
-SquareRoot(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: SquareRoot: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop, op);
- sim_fpu_sqrt (&ans, &wop);
- sim_fpu_to32 (&res, &ans);
- result = res;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop, op);
- sim_fpu_sqrt (&ans, &wop);
- sim_fpu_to64 (&res, &ans);
- result = res;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: SquareRoot: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-#if 0
-uword64
-Max (uword64 op1,
- uword64 op2,
- FP_formats fmt)
-{
- int cmp;
- unsigned64 result;
-
-#ifdef DEBUG
- printf("DBG: Max: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt)
- {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- cmp = sim_fpu_cmp (&wop1, &wop2);
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- cmp = sim_fpu_cmp (&wop1, &wop2);
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- switch (cmp)
- {
- case SIM_FPU_IS_SNAN:
- case SIM_FPU_IS_QNAN:
- result = op1;
- case SIM_FPU_IS_NINF:
- case SIM_FPU_IS_NNUMBER:
- case SIM_FPU_IS_NDENORM:
- case SIM_FPU_IS_NZERO:
- result = op2; /* op1 - op2 < 0 */
- case SIM_FPU_IS_PINF:
- case SIM_FPU_IS_PNUMBER:
- case SIM_FPU_IS_PDENORM:
- case SIM_FPU_IS_PZERO:
- result = op1; /* op1 - op2 > 0 */
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Max: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-#endif
-
-#if 0
-uword64
-Min (uword64 op1,
- uword64 op2,
- FP_formats fmt)
-{
- int cmp;
- unsigned64 result;
-
-#ifdef DEBUG
- printf("DBG: Min: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt)
- {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- cmp = sim_fpu_cmp (&wop1, &wop2);
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- cmp = sim_fpu_cmp (&wop1, &wop2);
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- switch (cmp)
- {
- case SIM_FPU_IS_SNAN:
- case SIM_FPU_IS_QNAN:
- result = op1;
- case SIM_FPU_IS_NINF:
- case SIM_FPU_IS_NNUMBER:
- case SIM_FPU_IS_NDENORM:
- case SIM_FPU_IS_NZERO:
- result = op1; /* op1 - op2 < 0 */
- case SIM_FPU_IS_PINF:
- case SIM_FPU_IS_PNUMBER:
- case SIM_FPU_IS_PDENORM:
- case SIM_FPU_IS_PZERO:
- result = op2; /* op1 - op2 > 0 */
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Min: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-#endif
-
-uword64
-convert (SIM_DESC sd,
- sim_cpu *cpu,
- address_word cia,
- int rm,
- uword64 op,
- FP_formats from,
- FP_formats to)
-{
- sim_fpu wop;
- sim_fpu_round round;
- unsigned32 result32;
- unsigned64 result64;
-
-#ifdef DEBUG
-#if 0 /* FIXME: doesn't compile */
- printf("DBG: Convert: mode %s : op 0x%s : from %s : to %s : (PC = 0x%s)\n",RMMODE(rm),pr_addr(op),DOFMT(from),DOFMT(to),pr_addr(IPC));
-#endif
-#endif /* DEBUG */
-
- switch (rm)
- {
- case FP_RM_NEAREST:
- /* Round result to nearest representable value. When two
- representable values are equally near, round to the value
- that has a least significant bit of zero (i.e. is even). */
- round = sim_fpu_round_near;
- break;
- case FP_RM_TOZERO:
- /* Round result to the value closest to, and not greater in
- magnitude than, the result. */
- round = sim_fpu_round_zero;
- break;
- case FP_RM_TOPINF:
- /* Round result to the value closest to, and not less than,
- the result. */
- round = sim_fpu_round_up;
- break;
-
- case FP_RM_TOMINF:
- /* Round result to the value closest to, and not greater than,
- the result. */
- round = sim_fpu_round_down;
- break;
- default:
- round = 0;
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- /* Convert the input to sim_fpu internal format */
- switch (from)
- {
- case fmt_double:
- sim_fpu_64to (&wop, op);
- break;
- case fmt_single:
- sim_fpu_32to (&wop, op);
- break;
- case fmt_word:
- sim_fpu_i32to (&wop, op, round);
- break;
- case fmt_long:
- sim_fpu_i64to (&wop, op, round);
- break;
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- /* Convert sim_fpu format into the output */
- /* The value WOP is converted to the destination format, rounding
- using mode RM. When the destination is a fixed-point format, then
- a source value of Infinity, NaN or one which would round to an
- integer outside the fixed point range then an IEEE Invalid
- Operation condition is raised. */
- switch (to)
- {
- case fmt_single:
- sim_fpu_round_32 (&wop, round, 0);
- sim_fpu_to32 (&result32, &wop);
- result64 = result32;
- break;
- case fmt_double:
- sim_fpu_round_64 (&wop, round, 0);
- sim_fpu_to64 (&result64, &wop);
- break;
- case fmt_word:
- sim_fpu_to32i (&result32, &wop, round);
- result64 = result32;
- break;
- case fmt_long:
- sim_fpu_to64i (&result64, &wop, round);
- break;
- default:
- result64 = 0;
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Convert: returning 0x%s (to format = %s)\n",pr_addr(result64),DOFMT(to));
-#endif /* DEBUG */
-
- return(result64);
-}
-
-
-/*-- co-processor support routines ------------------------------------------*/
-
-static int UNUSED
-CoProcPresent(unsigned int coproc_number)
-{
- /* Return TRUE if simulator provides a model for the given co-processor number */
- return(0);
-}
-
-void
-cop_lw (SIM_DESC sd,
- sim_cpu *cpu,
- address_word cia,
- int coproc_num,
- int coproc_reg,
- unsigned int memword)
-{
- switch (coproc_num)
- {
- case 1:
- if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT)
- {
-#ifdef DEBUG
- printf("DBG: COP_LW: memword = 0x%08X (uword64)memword = 0x%s\n",memword,pr_addr(memword));
-#endif
- StoreFPR(coproc_reg,fmt_word,(uword64)memword);
- FPR_STATE[coproc_reg] = fmt_uninterpreted;
- break;
- }
-
- default:
-#if 0 /* this should be controlled by a configuration option */
- sim_io_printf(sd,"COP_LW(%d,%d,0x%08X) at PC = 0x%s : TODO (architecture specific)\n",coproc_num,coproc_reg,memword,pr_addr(cia));
-#endif
- break;
- }
-
- return;
+ return;
}
void
case 1:
if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT)
{
- StoreFPR(coproc_reg,fmt_uninterpreted,memword);
+ StoreFPR(coproc_reg,fmt_uninterpreted_64,memword);
break;
}
case 1:
if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT)
{
- FP_formats hold;
- hold = FPR_STATE[coproc_reg];
- FPR_STATE[coproc_reg] = fmt_word;
- value = (unsigned int)ValueFPR(coproc_reg,fmt_uninterpreted);
- FPR_STATE[coproc_reg] = hold;
+ value = (unsigned int)ValueFPR(coproc_reg,fmt_uninterpreted_32);
break;
}
case 1:
if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT)
{
- value = ValueFPR(coproc_reg,fmt_uninterpreted);
+ value = ValueFPR(coproc_reg,fmt_uninterpreted_64);
break;
}
decode_coproc (SIM_DESC sd,
sim_cpu *cpu,
address_word cia,
- unsigned int instruction)
+ unsigned int instruction,
+ int coprocnum,
+ CP0_operation op,
+ int rt,
+ int rd,
+ int sel)
{
- int coprocnum = ((instruction >> 26) & 3);
-
switch (coprocnum)
{
case 0: /* standard CPU control and cache registers */
{
- int code = ((instruction >> 21) & 0x1F);
- int rt = ((instruction >> 16) & 0x1F);
- int rd = ((instruction >> 11) & 0x1F);
- int tail = instruction & 0x3ff;
/* R4000 Users Manual (second edition) lists the following CP0
instructions:
CODE><-RT><RD-><--TAIL--->
CACHE Cache operation (VR4100 = 101111bbbbbpppppiiiiiiiiiiiiiiii)
ERET Exception return (VR4100 = 01000010000000000000000000011000)
*/
- if (((code == 0x00) || (code == 0x04) /* MFC0 / MTC0 */
- || (code == 0x01) || (code == 0x05)) /* DMFC0 / DMTC0 */
- && tail == 0)
+ if (((op == cp0_mfc0) || (op == cp0_mtc0) /* MFC0 / MTC0 */
+ || (op == cp0_dmfc0) || (op == cp0_dmtc0)) /* DMFC0 / DMTC0 */
+ && sel == 0)
{
- /* Clear double/single coprocessor move bit. */
- code &= ~1;
-
- /* M[TF]C0 (32 bits) | DM[TF]C0 (64 bits) */
-
switch (rd) /* NOTEs: Standard CP0 registers */
{
/* 0 = Index R4000 VR4100 VR4300 */
case 8:
/* 8 = BadVAddr R4000 VR4100 VR4300 */
- if (code == 0x00)
- GPR[rt] = COP0_BADVADDR;
+ if (op == cp0_mfc0 || op == cp0_dmfc0)
+ GPR[rt] = (signed_word) (signed_address) COP0_BADVADDR;
else
COP0_BADVADDR = GPR[rt];
break;
#endif /* SUBTARGET_R3900 */
case 12:
- if (code == 0x00)
+ if (op == cp0_mfc0 || op == cp0_dmfc0)
GPR[rt] = SR;
else
SR = GPR[rt];
break;
/* 13 = Cause R4000 VR4100 VR4300 */
case 13:
- if (code == 0x00)
+ if (op == cp0_mfc0 || op == cp0_dmfc0)
GPR[rt] = CAUSE;
else
CAUSE = GPR[rt];
break;
/* 14 = EPC R4000 VR4100 VR4300 */
case 14:
- if (code == 0x00)
+ if (op == cp0_mfc0 || op == cp0_dmfc0)
GPR[rt] = (signed_word) (signed_address) EPC;
else
EPC = GPR[rt];
#ifdef SUBTARGET_R3900
/* 16 = Debug */
case 16:
- if (code == 0x00)
+ if (op == cp0_mfc0 || op == cp0_dmfc0)
GPR[rt] = Debug;
else
Debug = GPR[rt];
#else
/* 16 = Config R4000 VR4100 VR4300 */
case 16:
- if (code == 0x00)
- GPR[rt] = C0_CONFIG;
- else
- C0_CONFIG = GPR[rt];
+ if (op == cp0_mfc0 || op == cp0_dmfc0)
+ GPR[rt] = C0_CONFIG;
+ else
+ /* only bottom three bits are writable */
+ C0_CONFIG = (C0_CONFIG & ~0x7) | (GPR[rt] & 0x7);
break;
#endif
#ifdef SUBTARGET_R3900
/* 17 = Debug */
case 17:
- if (code == 0x00)
+ if (op == cp0_mfc0 || op == cp0_dmfc0)
GPR[rt] = DEPC;
else
DEPC = GPR[rt];
GPR[rt] = 0xDEADC0DE; /* CPR[0,rd] */
/* CPR[0,rd] = GPR[rt]; */
default:
- if (code == 0x00)
+ if (op == cp0_mfc0 || op == cp0_dmfc0)
GPR[rt] = (signed_word) (signed32) COP0_GPR[rd];
else
COP0_GPR[rd] = GPR[rt];
#endif
}
}
- else if (code == 0x10 && (tail & 0x3f) == 0x18)
+ else if ((op == cp0_mfc0 || op == cp0_dmfc0)
+ && rd == 16)
+ {
+ /* [D]MFC0 RT,C0_CONFIG,SEL */
+ signed32 cfg = 0;
+ switch (sel)
+ {
+ case 0:
+ cfg = C0_CONFIG;
+ break;
+ case 1:
+ /* MIPS32 r/o Config1:
+ Config2 present */
+ cfg = 0x80000000;
+ /* MIPS16 implemented.
+ XXX How to check configuration? */
+ cfg |= 0x0000004;
+ if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT)
+ /* MDMX & FPU implemented */
+ cfg |= 0x00000021;
+ break;
+ case 2:
+ /* MIPS32 r/o Config2:
+ Config3 present. */
+ cfg = 0x80000000;
+ break;
+ case 3:
+ /* MIPS32 r/o Config3:
+ SmartMIPS implemented. */
+ cfg = 0x00000002;
+ break;
+ }
+ GPR[rt] = cfg;
+ }
+ else if (op == cp0_eret && sel == 0x18)
{
/* ERET */
if (SR & status_ERL)
SR &= ~status_EXL;
}
}
- else if (code == 0x10 && (tail & 0x3f) == 0x10)
+ else if (op == cp0_rfe && sel == 0x10)
{
/* RFE */
#ifdef SUBTARGET_R3900
/* TODO: CACHE register */
#endif /* SUBTARGET_R3900 */
}
- else if (code == 0x10 && (tail & 0x3f) == 0x1F)
+ else if (op == cp0_deret && sel == 0x1F)
{
/* DERET */
Debug &= ~Debug_DM;
static int thirty_two = 32;
char*
-pr_addr(addr)
- SIM_ADDR addr;
+pr_addr (SIM_ADDR addr)
{
char *paddr_str=get_cell();
switch (sizeof(addr))
}
char*
-pr_uword64(addr)
- uword64 addr;
+pr_uword64 (uword64 addr)
{
char *paddr_str=get_cell();
sprintf(paddr_str,"%08lx%08lx",
projects / thirdparty / binutils-gdb.git / blobdiff