+Wed Aug 26 09:29:38 1998 Joyce Janczyn <janczyn@cygnus.com>
+
+ * mn10300.igen (div,divu): Fix divide instructions so divide by 0
+ behaves like the hardware.
+
+Mon Aug 24 11:50:09 1998 Joyce Janczyn <janczyn@cygnus.com>
+
+ * sim-main.h (SIM_HANDLES_LMA): Define SIM_HANDLES_LMA.
+
+start-sanitize-am33
+Wed Aug 12 12:36:07 1998 Jeffrey A Law (law@cygnus.com)
+
+ * am33.igen: Handle case where first DSP operation modifies a
+ register used in the second DSP operation correctly.
+
+Tue Jul 28 10:10:25 1998 Jeffrey A Law (law@cygnus.com)
+
+ * am33.igen: Detect cases where two operands must not match for
+ DSP instructions too.
+
+Mon Jul 27 12:04:17 1998 Jeffrey A Law (law@cygnus.com)
+
+ * am33.igen: Detect cases where two operands must not match in
+ non-DSP instructions.
+
+end-sanitize-am33
+Fri Jul 24 18:15:21 1998 Joyce Janczyn <janczyn@cygnus.com>
+
+ * op_utils.c (do_syscall): Rewrite to use common/syscall.c.
+ (syscall_read_mem, syscall_write_mem): New functions for syscall
+ callbacks.
+ * mn10300_sim.h: Add prototypes for syscall_read_mem and
+ syscall_write_mem.
+ * mn10300.igen: Change C++ style comments to C style comments.
+ Check for divide by zero in div and divu ops.
+
+start-sanitize-am33
+Fri Jul 24 12:49:28 1998 Jeffrey A Law (law@cygnus.com)
+
+ * am33.igen (translate_xreg): New function. Use it as needed.
+
+Thu Jul 23 10:05:28 1998 Jeffrey A Law (law@cygnus.com)
+
+ * am33.igen: Add some missing instructions.
+
+ * am33.igen: Autoincrement loads/store fixes.
+
+Tue Jul 21 09:48:14 1998 Jeffrey A Law (law@cygnus.com)
+
+ * am33.igen: Add mov_lCC DSP instructions.
+
+ * am33.igen: Add most am33 DSP instructions.
+
+end-sanitize-am33
+Thu Jul 9 10:06:55 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300.igen: Fix Z bit for addc and subc instructions.
+ Minor fixes in multiply/divide patterns.
+
+start-sanitize-am33
+ * am33.igen: Add missing mul[u] imm32,Rn. Fix condition code
+ handling for many instructions. Fix sign extension for some
+ 24bit immediates.
+
+ * am33.igen: Fix Z bit for remaining addc/subc instructions.
+ Do not sign extend immediate for mov imm,XRn.
+ More random mul, mac & div fixes.
+ Remove some unused variables.
+ Sign extend 24bit displacement in memory addresses.
+
+ * am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn. Various
+ fixes to 2 register multiply, divide and mac instructions. Set
+ Z,N correctly for sat16. Sign extend 24 bit immediate for add,
+ and sub instructions.
+
+ * am33.igen: Add remaining non-DSP instructions.
+end-sanitize-am33
+
+start-sanitize-am33
+Wed Jul 8 16:29:12 1998 Jeffrey A Law (law@cygnus.com)
+
+ * am33.igen (translate_rreg): New function. Use it as appropriate.
+
+ * am33.igen: More am33 instructions. Fix "div".
+
+Mon Jul 6 15:39:22 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300.igen: Add am33 support.
+
+ * Makefile.in: Use multi-sim to support both a mn10300 and am33
+ simulator.
+
+ * am33.igen: Add many more am33 instructions.
+
+end-sanitize-am33
+Wed Jul 1 17:07:09 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300_sim.h (FETCH24): Define.
+
+start-sanitize-am33
+ * mn10300_sim.h: Add defines for some registers found on the AM33.
+ * am33.igen: New file with some am33 support.
+end-sanitize-am33
+
+Tue Jun 30 11:23:20 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300_sim.h: Include bfd.h
+ (struct state): Add more room for processor specific registers.
+start-sanitize-am33
+ (REG_E0): Define.
+end-sanitize-am33
+
+start-sanitize-am30
+Thu Jun 25 10:12:03 1998 Joyce Janczyn <janczyn@cygnus.com>
+
+ * dv-mn103tim.c: Include sim-assert.h
+ * dv-mn103ser.c (do_polling_event): Check for incoming data on
+ serial line and schedule next polling event.
+ (read_status_reg): schedule events to check for incoming data on
+ serial line and issue interrupt if necessary.
+
+Fri Jun 19 16:47:27 1998 Joyce Janczyn <janczyn@cygnus.com>
+
+ * interp.c (sim_open): hook up serial 1 and 2 ports properly (typo).
+
+Fri Jun 19 11:59:26 1998 Joyce Janczyn <janczyn@cygnus.com>
+
+ * interp.c (board): Rename am32 to stdeval1 as this is the name
+ consistently used to refer to the mn1030002 board.
+
+Thu June 18 14:37:14 1998 Joyce Janczyn <janczyn@cygnus.com>
+ * interp.c (sim_open): Fix typo in address of EXTMD register
+ (0x34000280, not 0x3400280).
+
+end-sanitize-am30
+Wed Jun 17 18:00:18 1998 Jeffrey A Law (law@cygnus.com)
+
+ * simops.c (syscall): Handle change in opcode # for syscall.
+ * mn10300.igen (syscall): Likewise.
+
+start-sanitize-am30
+Tue June 16 09:36:21 1998 Joyce Janczyn <janczyn@cygnus.com>
+ * dv-mn103int.c (mn103int_finish): Regular interrupts (not NMI or
+ reset) are not enabled on reset.
+
+Sun June 14 17:04:00 1998 Joyce Janczyn <janczyn@cygnus.com>
+ * dv-mn103iop.c (write_*_reg): Check for attempt to write r/o
+ register bits.
+ * dv-mn103ser.c: Fill in methods for reading and writing to serial
+ device registers.
+ * interp.c (sim_open): Make the serial device a polling device.
+
+Fri June 12 16:24:00 1998 Joyce Janczyn <janczyn@cygnus.com>
+ * dv-mn103iop.c: New file for handling am32 io ports.
+ * configure.in: Add mn103iop to hw_device list.
+ * configure: Re-generate.
+ * interp.c (sim_open): Create io port device.
+
+Wed June 10 14:34:00 1998 Joyce Janczyn <janczyn@cygnus.com>
+ * dv-mn103int.c (external_group): Use enumerated types to access
+ correct group addresses.
+ * dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
+ triggers an interrupt on the higher-numbered timer's port.
+
+end-sanitize-am30
+Mon June 8 13:30:00 1998 Joyce Janczyn <janczyn@cygnus.com>
+ * interp.c: (mn10300_option_handler): New function parses arguments
+ using sim-options.
+start-sanitize-am30
+ * (board): Add --board option for specifying am32.
+ * (sim_open): Create new timer and serial devices and control
+ configuration of other am32 devices via board option.
+ * dv-mn103tim.c, dv-mn103ser.c: New files for timers and serial devices.
+ * dv-mn103cpu.c: Fix typos in opening comments.
+ * dv-mn103int.c: Adjust interrupt controller settings for am32 instead of am30.
+ * configure.in: Add mn103tim and mn103ser to hw_device list.
+ * configure: Re-generate.
+end-sanitize-am30
+
+start-sanitize-am30
+Mon May 25 20:50:35 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * dv-mn103int.c, dv-mn103cpu.c: Rename *_callback to *_method.
+
+ * dv-mn103cpu.c, dv-mn103int.c: Include hw-main.h and
+ sim-main.h. Declare a struct hw_descriptor instead of struct
+ hw_device_descriptor.
+
+Mon May 25 17:33:33 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * dv-mn103cpu.c (struct mn103cpu): Change type of pending_handler
+ to struct hw_event.
+
+Fri May 22 12:17:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (SIM_AC_OPTION_HARDWARE): Add argument "yes".
+
+Wed May 6 13:29:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_open): Create a polling PAL device.
+
+end-sanitize-am30
+Fri May 1 16:39:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * dv-mn103int.c (mn103int_port_event):
+ (mn103int_port_event):
+ (mn103int_io_read_buffer):
+ (mn103int_io_write_buffer):
+
+ * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Drop CPU/CIA args.
+ (mn103cpu_port_event): Ditto.
+ (mn103cpu_io_read_buffer): Ditto.
+ (mn103cpu_io_write_buffer): Ditto.
+
+Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Sun Apr 26 15:19:55 1998 Tom Tromey <tromey@cygnus.com>
+
+ * acconfig.h: New file.
+ * configure.in: Reverted change of Apr 24; use sinclude again.
+
Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
* configure: Regenerated to track ../common/aclocal.m4 changes.
projects / thirdparty / binutils-gdb.git / blobdiff