+2014-03-10 Mike Frysinger <vapier@gentoo.org>
+
+ * gdb-if.c (sim_do_command): Add const to cmd. Move args
+ to top and add const. Call strdup on cmd and free at end.
+
+2014-03-05 Mike Frysinger <vapier@gentoo.org>
+
+ * gdb-if.c (sim_load): Add const to prog.
+
+2014-02-17 Kevin Buettner <kevinb@redhat.com>
+
+ * gdb-if.c (rx_signal_to_host): Rename to
+ `rx_signal_to_gdb_signal'. Make static. Update all callers
+ to use new name. Use signal names from include/gdb/signals.h.
+
+2013-09-23 Alan Modra <amodra@gmail.com>
+
+ * configure: Regenerate.
+
+2013-06-25 Nick Clifton <nickc@redhat.com>
+
+ * rx.c (SHIFT_OP): A shift by zero still sets the condition
+ codes.
+
+2013-06-03 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4, configure: Regenerate.
+
+2013-01-16 Nick Clifton <nickc@redhat.com>
+
+ * rx.c (decode_opcode): Handle RXO_satr.
+
+2012-06-15 Joel Brobecker <brobecker@adacore.com>
+
+ * config.in, configure: Regenerate.
+
+2012-05-24 Pedro Alves <palves@redhat.com>
+
+ PR gdb/7205
+
+ Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
+
+2012-03-24 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4, config.in, configure: Regenerate.
+
+2012-03-22 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (CYCLE_ACCURATE): Add template with AC_DEFINE call.
+ (CYCLE_STATS): Likewise.
+
+2012-03-02 Kevin Buettner <kevinb@redhat.com>
+
+ * load.h (rx_load): Add `callback' parameter to function prototype.
+ (gdb/callback.h): Include.
+ * load.c (load.h): Include.
+ (xprintf, find_section_name_by_offset): New functions.
+ (rx_load): Add `callback' parameter. Add code for printing
+ section loaded using GDB's printf facilities.
+ * gdb-if.c (sim_load, sim_create_inferior): Update calls to
+ rx_load().
+ * main.c (main): Likewise.
+ * syscalls.c, syscalls.h (get_callbacks): New function.
+
+2011-12-03 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4: New file.
+ * configure: Regenerate.
+
+2011-10-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Change include to common/acinclude.m4.
+
+2011-10-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
+ call. Replace common.m4 include with SIM_AC_COMMON.
+ * configure: Regenerate.
+
+2011-07-11 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Rename from configure.in.
+
+2011-07-11 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.in: Add "dnl" before copyright notice.
+
+2011-04-16 Mike Frysinger <vapier@gentoo.org>
+
+ * gdb-if.c (sim_complete_command): New stub function.
+
+2011-01-11 Andrew Burgess <aburgess@broadcom.com>
+
+ * gdb-if.c (sim_store_register): Update return value to
+ match new API.
+
+2010-12-14 DJ Delorie <dj@redhat.com>
+
+ * rx.c (decode_opcode): For "MVFC PC,", use the address of the
+ opcode, not the address following the opcode.
+ (decode_opcode): RXO_branchrel is relative to the opcode's PC, not
+ the address following the opcode.
+
+2010-11-11 DJ Delorie <dj@redhat.com>
+
+ * rx.c (lsb_count): New.
+ (divu_cycles): New.
+ (div_cycles): New.
+ (decode_opcode): Fix cycle count math for div, divu, suntil, and
+ swhile.
+
+2010-09-29 Kevin Buettner <kevinb@redhat.com>
+
+ * mem.c (rx_mem_ptr): When invalidating the decode cache, account
+ for the fact that the instruction decoder never uses swapped
+ addresses.
+
+2010-09-29 Nick Clifton <nickc@redhat.com>
+
+ * rx.c (decode_opcode: RXO_int): Only break out of the emulation
+ loop if rx_syscall() does not return a RX_STEPPED result.
+
+2010-09-23 Kevin Buettner <kevinb@redhat.com>
+
+ * rx.c (decode_opcode): Add cycle information for RXO_smovu.
+
+2010-09-23 Kevin Buettner <kevinb@redhat.com>
+
+ * fpu.c, gdb-if.c, load.c, misc.c, syscalls.c (config.h): Include.
+
+ * rx.c (decode_opcode): Declare `tx' as unsigned.
+
+ * cpu.h (reset_decoder): Declare.
+ * load.c (rx_load): Call `reset_decoder'.
+ * rx.c (reset_decoder): New function.
+
+2010-07-29 DJ Delorie <dj@redhat.com>
+
+ * rx.c (decode_cache_base): New.
+ (id_names): Remove ediv and edivu.
+ (optype_names): Add TwoReg.
+ (maybe_get_mem_page): New.
+ (rx_get_byte): Call it.
+ (get_op): Add TwoReg support.
+ (put_op): Likewise.
+ (PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode"
+ is a pointer now.
+ (DO_RETURN): New. We use longjmp to return an exception result.
+ (decode_opcode): Make opcode a pointer to the decode cache. Save
+ decoded opcode information and re-use. Call DO_RETURN instead of
+ return throughout. Remove ediv and edivu.
+ * mem.c (ptdc): New. Adds decode cache.
+ (rx_mem_ptr): Support it.
+ (rx_mem_decode_cache): New.
+ * mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE.
+ (rx_mem_decode_cache): Declare.
+ * gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here...
+ * main.c (main): ...and here. Use a fast loop if neither trace
+ nor disassemble is given.
+ * cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED,
+ RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a
+ valid code for anything.
+
+2010-07-27 DJ Delorie <dj@redhat.com>
+
+ * README.txt: New.
+ * config.h (CYCLE_ACCURATE, CYCLE_STATS): New.
+ * configure.in (--enable-cycle-accurate, --enable-cycle-stats):
+ New. Default to enabled.
+ * configure: Regenerate.
+
+ * cpu.h (regs_type): Add cycle tracking info.
+ (reset_pipeline_stats): Declare.
+ (halt_pipeline_stats): Declare.
+ (pipeline_stats): Declare.
+ * main.c (done): Call pipeline_stats().
+ * mem.h (rx_mem_ptr): Moved to here ...
+ * mem.c (mem_ptr): ... from here. Rename throughout.
+ (mem_put_byte): Move LEDs to Port A. Add Port B to control cycle
+ statistics. Move UART to SCI4.
+ (mem_put_hi): Add TPU 1-2. TPU 1 and 2 count CPU cycles.
+ * reg.c (init_regs): Set Rt reg to -1 (no reg).
+ * rx.c: Add cycle counting and statistics throughout.
+ (rx_get_byte): Optimize for speed.
+ (decode_opcode): Likewise.
+ (reset_pipeline_stats): New.
+ (halt_pipeline_stats): New.
+ (pipeline_stats): New.
+ * trace.c (sim_disasm_one): Print cycle count.
+
+2010-07-07 Kevin Buettner <kevinb@redhat.com>
+
+ * gdb-if.c (sim_store_register): Add case for sim_rx_acc_regnum.
+
+2010-06-24 Kevin Buettner <kevinb@redhat.com>
+
+ * gdb-if.c (trace.h): Include.
+ (reg_size, sim_fetch_register): Add cases for sim_rx_acc_regnum.
+
+2010-06-07 Nick Clifton <nickc@redhat.com>
+
+ * reg.c (set_oszc): Use unsigned int for the mask.
+ (set_szc, set_osz, set_sz): Likewise.
+
+2010-05-28 Kevin Buettner <kevinb@redhat.com>
+
+ * gdb-if.c (sim_do_command): Add a "sim verbose noisy" command.
+
+2010-04-14 Mike Frysinger <vapier@gentoo.org>
+
+ * gdb-if.c (sim_write): Add const to buf arg.
+
+2010-01-30 Masaki Muranaka <monaka@monami-software.com>
+
+ * configure.in: Check if the host has getopt.h.
+ * configure: Regenerate.
+ * config.in: Regenerate.
+ * main.c: Include config.h.
+ Use HAVE_STDLIB_H, HAVE_UNISTD_H, HAVE_GETOPT_H.
+ Include getopt.h in case HAVE_GETOPT_H is defined.
+
2009-12-22 Yoshinori Sato <ysato@users.sourceforge.jp>
* rx/rx.c (decode_opcode): btst bit address mask fix.
projects / thirdparty / binutils-gdb.git / blobdiff