--- /dev/null
+From: Divy Le Ray <divy@chelsio.com>
+Date: Wed, 29 Oct 2008 05:40:32 +0000 (-0700)
+Subject: cxgb3 - enable lro control through ethtool
+Acked-by: Karsten Keil <kkeil@novell.com>
+Reference: bnc#446739
+
+
+cxgb3 - enable lro control through ethtool
+
+Implement ethtool's get_flags and set_flags methods.
+It enables ethtool to control the LRO settings.
+
+Signed-off-by: Divy Le Ray <divy@chelsio.com>
+Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
+---
+
+Index: linux-2.6.27/drivers/net/cxgb3/cxgb3_main.c
+===================================================================
+--- linux-2.6.27.orig/drivers/net/cxgb3/cxgb3_main.c
++++ linux-2.6.27/drivers/net/cxgb3/cxgb3_main.c
+@@ -470,6 +470,36 @@ static void enable_all_napi(struct adapt
+ }
+
+ /**
++ * set_qset_lro - Turn a queue set's LRO capability on and off
++ * @dev: the device the qset is attached to
++ * @qset_idx: the queue set index
++ * @val: the LRO switch
++ *
++ * Sets LRO on or off for a particular queue set.
++ * the device's features flag is updated to reflect the LRO
++ * capability when all queues belonging to the device are
++ * in the same state.
++ */
++static void set_qset_lro(struct net_device *dev, int qset_idx, int val)
++{
++ struct port_info *pi = netdev_priv(dev);
++ struct adapter *adapter = pi->adapter;
++ int i, lro_on = 1;
++
++ adapter->params.sge.qset[qset_idx].lro = !!val;
++ adapter->sge.qs[qset_idx].lro_enabled = !!val;
++
++ /* let ethtool report LRO on only if all queues are LRO enabled */
++ for (i = pi->first_qset; i < pi->first_qset + pi->nqsets; ++i)
++ lro_on &= adapter->params.sge.qset[i].lro;
++
++ if (lro_on)
++ dev->features |= NETIF_F_LRO;
++ else
++ dev->features &= ~NETIF_F_LRO;
++}
++
++/**
+ * setup_sge_qsets - configure SGE Tx/Rx/response queues
+ * @adap: the adapter
+ *
+@@ -492,8 +522,7 @@ static int setup_sge_qsets(struct adapte
+ pi->qs = &adap->sge.qs[pi->first_qset];
+ for (j = pi->first_qset; j < pi->first_qset + pi->nqsets;
+ ++j, ++qset_idx) {
+- if (!pi->rx_csum_offload)
+- adap->params.sge.qset[qset_idx].lro = 0;
++ set_qset_lro(dev, qset_idx, pi->rx_csum_offload);
+ err = t3_sge_alloc_qset(adap, qset_idx, 1,
+ (adap->flags & USING_MSIX) ? qset_idx + 1 :
+ irq_idx,
+@@ -1637,13 +1666,10 @@ static int set_rx_csum(struct net_device
+
+ p->rx_csum_offload = data;
+ if (!data) {
+- struct adapter *adap = p->adapter;
+ int i;
+
+- for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) {
+- adap->params.sge.qset[i].lro = 0;
+- adap->sge.qs[i].lro_enabled = 0;
+- }
++ for (i = p->first_qset; i < p->first_qset + p->nqsets; i++)
++ set_qset_lro(dev, i, 0);
+ }
+ return 0;
+ }
+@@ -1798,6 +1824,25 @@ static void get_wol(struct net_device *d
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+ }
+
++static int cxgb3_set_flags(struct net_device *dev, u32 data)
++{
++ struct port_info *pi = netdev_priv(dev);
++ int i;
++
++ if (data & ETH_FLAG_LRO) {
++ if (!pi->rx_csum_offload)
++ return -EINVAL;
++
++ for (i = pi->first_qset; i < pi->first_qset + pi->nqsets; i++)
++ set_qset_lro(dev, i, 1);
++
++ } else
++ for (i = pi->first_qset; i < pi->first_qset + pi->nqsets; i++)
++ set_qset_lro(dev, i, 0);
++
++ return 0;
++}
++
+ static const struct ethtool_ops cxgb_ethtool_ops = {
+ .get_settings = get_settings,
+ .set_settings = set_settings,
+@@ -1827,6 +1872,8 @@ static const struct ethtool_ops cxgb_eth
+ .get_regs = get_regs,
+ .get_wol = get_wol,
+ .set_tso = ethtool_op_set_tso,
++ .get_flags = ethtool_op_get_flags,
++ .set_flags = cxgb3_set_flags,
+ };
+
+ static int in_range(int val, int lo, int hi)
+@@ -1943,11 +1990,9 @@ static int cxgb_extension_ioctl(struct n
+ }
+ }
+ }
+- if (t.lro >= 0) {
+- struct sge_qset *qs = &adapter->sge.qs[t.qset_idx];
+- q->lro = t.lro;
+- qs->lro_enabled = t.lro;
+- }
++ if (t.lro >= 0)
++ set_qset_lro(dev, t.qset_idx, t.lro);
++
+ break;
+ }
+ case CHELSIO_GET_QSET_PARAMS:{