+++ /dev/null
-From foo@baz Tue Feb 17 22:39:56 PST 2009
-Date: Tue, 17 Feb 2009 22:39:56 -0800
-To: Greg KH <greg@kroah.com>
-From: Greg Kroah-Hartman <gregkh@suse.de>
-Subject: USB: serial: add qualcomm wireless modem driver
-
-Driver originally written by Qualcomm, but rewritten by me due to the
-totally different coding style. Cleaned up the probe logic to make a
-bit more sense, this is one wierd device. They could have prevented all
-of this by just writing sane firmware for the modem.
-
-Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
----
- drivers/usb/serial/Kconfig | 9 ++
- drivers/usb/serial/Makefile | 1
- drivers/usb/serial/qcserial.c | 152 ++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 162 insertions(+)
-
---- a/drivers/usb/serial/Kconfig
-+++ b/drivers/usb/serial/Kconfig
-@@ -472,6 +472,15 @@ config USB_SERIAL_OTI6858
- To compile this driver as a module, choose M here: the
- module will be called oti6858.
-
-+config USB_SERIAL_QUALCOMM
-+ tristate "USB Qualcomm Serial modem"
-+ help
-+ Say Y here if you have a Qualcomm USB modem device. These are
-+ usually wireless cellular modems.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called qcserial.
-+
- config USB_SERIAL_SPCP8X5
- tristate "USB SPCP8x5 USB To Serial Driver"
- help
---- a/drivers/usb/serial/Makefile
-+++ b/drivers/usb/serial/Makefile
-@@ -44,6 +44,7 @@ obj-$(CONFIG_USB_SERIAL_OMNINET) += omn
- obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
- obj-$(CONFIG_USB_SERIAL_OTI6858) += oti6858.o
- obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
-+obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o
- obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
- obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o
- obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o
---- /dev/null
-+++ b/drivers/usb/serial/qcserial.c
-@@ -0,0 +1,152 @@
-+/*
-+ * Qualcomm Serial USB driver
-+ *
-+ * Copyright (c) 2008 QUALCOMM Incorporated.
-+ * Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
-+ * Copyright (c) 2009 Novell Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License version
-+ * 2 as published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/usb.h>
-+#include <linux/usb/serial.h>
-+
-+#define DRIVER_VERSION "v0.4"
-+#define DRIVER_AUTHOR "Qualcomm Inc"
-+#define DRIVER_DESC "Qualcomm USB Serial driver"
-+
-+#define NUM_BULK_EPS 1
-+#define MAX_BULK_EPS 6
-+
-+static int debug;
-+
-+static struct usb_device_id id_table[] = {
-+ {USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */
-+ {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
-+ { } /* Terminating entry */
-+};
-+MODULE_DEVICE_TABLE(usb, id_table);
-+
-+static struct usb_driver qcdriver = {
-+ .name = "qcserial",
-+ .probe = usb_serial_probe,
-+ .disconnect = usb_serial_disconnect,
-+ .id_table = id_table,
-+ .suspend = usb_serial_suspend,
-+ .resume = usb_serial_resume,
-+ .supports_autosuspend = true,
-+};
-+
-+static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
-+{
-+ int retval = -ENODEV;
-+ __u8 nintf;
-+ __u8 ifnum;
-+
-+ dbg("%s", __func__);
-+
-+ nintf = serial->dev->actconfig->desc.bNumInterfaces;
-+ dbg("Num Interfaces = %d", nintf);
-+ ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
-+ dbg("This Interface = %d", ifnum);
-+
-+ switch (nintf) {
-+ case 1:
-+ /* QDL mode */
-+ if (serial->interface->num_altsetting == 2) {
-+ struct usb_host_interface *intf;
-+
-+ intf = &serial->interface->altsetting[1];
-+ if (intf->desc.bNumEndpoints == 2) {
-+ if (usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
-+ usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
-+ dbg("QDL port found");
-+ retval = usb_set_interface(serial->dev, ifnum, 1);
-+ if (retval < 0) {
-+ dev_err(&serial->dev->dev,
-+ "Could not set interface, error %d\n",
-+ retval);
-+ retval = -ENODEV;
-+ }
-+ return retval;
-+ }
-+ }
-+ }
-+ break;
-+
-+ case 4:
-+ /* Composite mode */
-+ if (ifnum == 2) {
-+ dbg("Modem port found");
-+ retval = usb_set_interface(serial->dev, ifnum, 0);
-+ if (retval < 0) {
-+ dev_err(&serial->dev->dev,
-+ "Could not set interface, error %d\n",
-+ retval);
-+ retval = -ENODEV;
-+ }
-+ return retval;
-+ }
-+ break;
-+
-+ default:
-+ dev_err(&serial->dev->dev,
-+ "unknown number of interfaces: %d\n", nintf);
-+ return -ENODEV;
-+ }
-+
-+ return retval;
-+}
-+
-+static struct usb_serial_driver qcdevice = {
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "qcserial",
-+ },
-+ .description = "Qualcomm USB modem",
-+ .id_table = id_table,
-+ .usb_driver = &qcdriver,
-+ .num_ports = 1,
-+ .probe = qcprobe,
-+};
-+
-+static int __init qcinit(void)
-+{
-+ int retval;
-+
-+ retval = usb_serial_register(&qcdevice);
-+ if (retval)
-+ return retval;
-+
-+ retval = usb_register(&qcdriver);
-+ if (retval) {
-+ usb_serial_deregister(&qcdevice);
-+ return retval;
-+ }
-+
-+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION "\n");
-+
-+ return 0;
-+}
-+
-+static void __exit qcexit(void)
-+{
-+ usb_deregister(&qcdriver);
-+ usb_serial_deregister(&qcdevice);
-+}
-+
-+module_init(qcinit);
-+module_exit(qcexit);
-+
-+MODULE_AUTHOR(DRIVER_AUTHOR);
-+MODULE_DESCRIPTION(DRIVER_DESC);
-+MODULE_LICENSE("GPL v2");
-+MODULE_VERSION(DRIVER_VERSION);
-+
-+module_param(debug, bool, S_IRUGO | S_IWUSR);
-+MODULE_PARM_DESC(debug, "Debug enabled or not");