import hostapd
from wpasupplicant import WpaSupplicant
+from utils import parse_ie, disable_hapd, clear_regdom_dev
def test_ap_track_sta(dev, apdev):
"""Dualband AP tracking unconnected stations"""
+
try:
- _test_ap_track_sta(dev, apdev)
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "g",
+ "channel": "6",
+ "track_sta_max_num": "2"}
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "40",
+ "track_sta_max_num": "100",
+ "track_sta_max_age": "1"}
+ hapd2 = hostapd.add_ap(apdev[1], params)
+
+ _test_ap_track_sta(dev, hapd, apdev[0]['bssid'], hapd2,
+ apdev[1]['bssid'])
finally:
- subprocess.call(['iw', 'reg', 'set', '00'])
-
-def _test_ap_track_sta(dev, apdev):
- params = { "ssid": "track",
- "country_code": "US",
- "hw_mode": "g",
- "channel": "6",
- "track_sta_max_num": "2" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- bssid = apdev[0]['bssid']
-
- params = { "ssid": "track",
- "country_code": "US",
- "hw_mode": "a",
- "channel": "40",
- "track_sta_max_num": "100",
- "track_sta_max_age": "1" }
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], params)
- bssid2 = apdev[1]['bssid']
+ disable_hapd(hapd)
+ disable_hapd(hapd2)
+ clear_regdom_dev(dev, 3)
+def _test_ap_track_sta(dev, hapd, bssid, hapd2, bssid2):
for i in range(2):
dev[0].scan_for_bss(bssid, freq=2437, force_scan=True)
dev[0].scan_for_bss(bssid2, freq=5200, force_scan=True)
raise Exception("Station missing from 2.4 GHz tracking")
if addr2 in track:
raise Exception("Unexpected station included in 2.4 GHz tracking")
-
+
track = hapd2.request("TRACK_STA_LIST")
if addr0 not in track or addr2 not in track:
raise Exception("Station missing from 5 GHz tracking")
def test_ap_track_sta_no_probe_resp(dev, apdev):
"""Dualband AP not replying to probes from dualband STA on 2.4 GHz"""
try:
- _test_ap_track_sta_no_probe_resp(dev, apdev)
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "g",
+ "channel": "6",
+ "beacon_int": "10000",
+ "no_probe_resp_if_seen_on": apdev[1]['ifname']}
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "40",
+ "track_sta_max_num": "100"}
+ hapd2 = hostapd.add_ap(apdev[1], params)
+
+ _test_ap_track_sta_no_probe_resp(dev, apdev[0]['bssid'],
+ apdev[1]['bssid'])
finally:
- subprocess.call(['iw', 'reg', 'set', '00'])
+ disable_hapd(hapd)
+ disable_hapd(hapd2)
+ clear_regdom_dev(dev, 2)
-def _test_ap_track_sta_no_probe_resp(dev, apdev):
+def _test_ap_track_sta_no_probe_resp(dev, bssid, bssid2):
dev[0].flush_scan_cache()
- params = { "ssid": "track",
- "country_code": "US",
- "hw_mode": "g",
- "channel": "6",
- "beacon_int": "10000",
- "no_probe_resp_if_seen_on": apdev[1]['ifname'] }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- bssid = apdev[0]['bssid']
-
- params = { "ssid": "track",
- "country_code": "US",
- "hw_mode": "a",
- "channel": "40",
- "track_sta_max_num": "100" }
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], params)
- bssid2 = apdev[1]['bssid']
-
dev[0].scan_for_bss(bssid2, freq=5200, force_scan=True)
dev[1].scan_for_bss(bssid, freq=2437, force_scan=True)
dev[0].scan(freq=2437, type="ONLY")
dev[0].scan(freq=2437, type="ONLY")
- if dev[0].get_bss(bssid):
- raise Exception("2.4 GHz AP found unexpectedly")
+ bss = dev[0].get_bss(bssid)
+ if bss:
+ ie = parse_ie(bss['ie'])
+ # Check whether this is from a Beacon frame (TIM element included) since
+ # it is possible that a Beacon frame was received during the active
+ # scan. This test should fail only if a Probe Response frame was
+ # received.
+ if 5 not in ie:
+ raise Exception("2.4 GHz AP found unexpectedly")
def test_ap_track_sta_no_auth(dev, apdev):
"""Dualband AP rejecting authentication from dualband STA on 2.4 GHz"""
try:
- _test_ap_track_sta_no_auth(dev, apdev)
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "g",
+ "channel": "6",
+ "track_sta_max_num": "100",
+ "no_auth_if_seen_on": apdev[1]['ifname']}
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "40",
+ "track_sta_max_num": "100"}
+ hapd2 = hostapd.add_ap(apdev[1], params)
+
+ _test_ap_track_sta_no_auth(dev, apdev[0]['bssid'], apdev[1]['bssid'])
finally:
- subprocess.call(['iw', 'reg', 'set', '00'])
-
-def _test_ap_track_sta_no_auth(dev, apdev):
- params = { "ssid": "track",
- "country_code": "US",
- "hw_mode": "g",
- "channel": "6",
- "track_sta_max_num": "100",
- "no_auth_if_seen_on": apdev[1]['ifname'] }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- bssid = apdev[0]['bssid']
-
- params = { "ssid": "track",
- "country_code": "US",
- "hw_mode": "a",
- "channel": "40",
- "track_sta_max_num": "100" }
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], params)
- bssid2 = apdev[1]['bssid']
+ disable_hapd(hapd)
+ disable_hapd(hapd2)
+ clear_regdom_dev(dev, 2)
+def _test_ap_track_sta_no_auth(dev, bssid, bssid2):
dev[0].scan_for_bss(bssid, freq=2437, force_scan=True)
dev[0].scan_for_bss(bssid2, freq=5200, force_scan=True)
dev[1].scan_for_bss(bssid, freq=2437, force_scan=True)
dev[0].connect("track", key_mgmt="NONE", scan_freq="2437",
freq_list="2437", wait_connect=False)
dev[1].request("DISCONNECT")
- ev = dev[0].wait_event([ "CTRL-EVENT-CONNECTED",
- "CTRL-EVENT-AUTH-REJECT" ], timeout=10)
+ ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED",
+ "CTRL-EVENT-AUTH-REJECT"], timeout=10)
if ev is None:
raise Exception("Unknown connection result")
if "CTRL-EVENT-CONNECTED" in ev:
raise Exception("No Neighbor Report element: " + ev)
dev[0].request("DISCONNECT")
-def test_ap_track_sta_force_5ghz(dev, apdev):
- """Dualband AP forcing dualband STA to connect on 5 GHz"""
+def test_ap_track_sta_no_auth_passive(dev, apdev):
+ """AP rejecting authentication from dualband STA on 2.4 GHz (passive)"""
try:
- _test_ap_track_sta_force_5ghz(dev, apdev)
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "g",
+ "channel": "6",
+ "no_auth_if_seen_on": apdev[1]['ifname']}
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "40",
+ "interworking": "1",
+ "venue_name": "eng:Venue",
+ "track_sta_max_num": "100"}
+ hapd2 = hostapd.add_ap(apdev[1], params)
+
+ _test_ap_track_sta_no_auth_passive(dev, apdev[0]['bssid'],
+ apdev[1]['bssid'])
finally:
- subprocess.call(['iw', 'reg', 'set', '00'])
+ disable_hapd(hapd)
+ disable_hapd(hapd2)
+ clear_regdom_dev(dev)
-def _test_ap_track_sta_force_5ghz(dev, apdev):
- params = { "ssid": "track",
- "country_code": "US",
- "hw_mode": "g",
- "channel": "6",
- "no_probe_resp_if_seen_on": apdev[1]['ifname'],
- "no_auth_if_seen_on": apdev[1]['ifname'] }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- bssid = apdev[0]['bssid']
+def _test_ap_track_sta_no_auth_passive(dev, bssid, bssid2):
+ dev[0].flush_scan_cache()
- params = { "ssid": "track",
- "country_code": "US",
- "hw_mode": "a",
- "channel": "40",
- "track_sta_max_num": "100" }
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], params)
- bssid2 = apdev[1]['bssid']
+ dev[0].scan_for_bss(bssid, freq=2437, force_scan=True)
+ for i in range(10):
+ dev[0].request("SCAN freq=5200 passive=1")
+ ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=5)
+ if ev is None:
+ raise Exception("Scan did not complete")
+ if dev[0].get_bss(bssid2):
+ break
+ if i == 9:
+ raise Exception("AP not found with passive scans")
+
+ if "OK" not in dev[0].request("ANQP_GET " + bssid2 + " 258"):
+ raise Exception("ANQP_GET command failed")
+ ev = dev[0].wait_event(["RX-ANQP"], timeout=1)
+ if ev is None or "Venue Name" not in ev:
+ raise Exception("Did not receive Venue Name")
+ dev[0].connect("track", key_mgmt="NONE", scan_freq="2437",
+ freq_list="2437", wait_connect=False)
+ ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED",
+ "CTRL-EVENT-AUTH-REJECT"], timeout=10)
+ if ev is None:
+ raise Exception("Unknown connection result")
+ if "CTRL-EVENT-CONNECTED" in ev:
+ raise Exception("Unexpected connection")
+ if "status_code=82" not in ev:
+ raise Exception("Unexpected rejection reason: " + ev)
+ dev[0].request("DISCONNECT")
+
+def test_ap_track_sta_force_5ghz(dev, apdev):
+ """Dualband AP forcing dualband STA to connect on 5 GHz"""
+ try:
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "g",
+ "channel": "6",
+ "no_probe_resp_if_seen_on": apdev[1]['ifname'],
+ "no_auth_if_seen_on": apdev[1]['ifname']}
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "40",
+ "track_sta_max_num": "100"}
+ hapd2 = hostapd.add_ap(apdev[1], params)
+
+ _test_ap_track_sta_force_5ghz(dev, apdev[0]['bssid'], apdev[1]['bssid'])
+ finally:
+ disable_hapd(hapd)
+ disable_hapd(hapd2)
+ clear_regdom_dev(dev)
+
+def _test_ap_track_sta_force_5ghz(dev, bssid, bssid2):
dev[0].scan_for_bss(bssid, freq=2437, force_scan=True)
dev[0].scan_for_bss(bssid2, freq=5200, force_scan=True)
def test_ap_track_sta_force_2ghz(dev, apdev):
"""Dualband AP forcing dualband STA to connect on 2.4 GHz"""
try:
- _test_ap_track_sta_force_2ghz(dev, apdev)
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "g",
+ "channel": "6",
+ "track_sta_max_num": "100"}
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "40",
+ "no_probe_resp_if_seen_on": apdev[0]['ifname'],
+ "no_auth_if_seen_on": apdev[0]['ifname']}
+ hapd2 = hostapd.add_ap(apdev[1], params)
+
+ _test_ap_track_sta_force_2ghz(dev, apdev[0]['bssid'], apdev[1]['bssid'])
finally:
- subprocess.call(['iw', 'reg', 'set', '00'])
-
-def _test_ap_track_sta_force_2ghz(dev, apdev):
- params = { "ssid": "track",
- "country_code": "US",
- "hw_mode": "g",
- "channel": "6",
- "track_sta_max_num": "100" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- bssid = apdev[0]['bssid']
-
- params = { "ssid": "track",
- "country_code": "US",
- "hw_mode": "a",
- "channel": "40",
- "no_probe_resp_if_seen_on": apdev[0]['ifname'],
- "no_auth_if_seen_on": apdev[0]['ifname'] }
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], params)
- bssid2 = apdev[1]['bssid']
+ disable_hapd(hapd)
+ disable_hapd(hapd2)
+ clear_regdom_dev(dev)
+def _test_ap_track_sta_force_2ghz(dev, bssid, bssid2):
dev[0].scan_for_bss(bssid2, freq=5200, force_scan=True)
dev[0].scan_for_bss(bssid, freq=2437, force_scan=True)
if freq != '2437':
raise Exception("Unexpected operating channel")
dev[0].request("DISCONNECT")
+
+def test_ap_track_taxonomy(dev, apdev):
+ """AP tracking STA taxonomy"""
+ try:
+ _test_ap_track_taxonomy(dev, apdev)
+ finally:
+ dev[1].request("SET p2p_disabled 0")
+ subprocess.call(['iw', 'reg', 'set', '00'])
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+ dev[2].flush_scan_cache()
+
+def _test_ap_track_taxonomy(dev, apdev):
+ params = {"ssid": "track",
+ "country_code": "US",
+ "hw_mode": "g",
+ "channel": "6",
+ "track_sta_max_num": "2"}
+ hapd = hostapd.add_ap(apdev[0], params)
+ bssid = apdev[0]['bssid']
+
+ dev[0].scan_for_bss(bssid, freq=2437, force_scan=True)
+ addr0 = dev[0].own_addr()
+ dev[0].connect("track", key_mgmt="NONE", scan_freq="2437")
+
+ dev[1].request("SET p2p_disabled 1")
+ dev[1].scan_for_bss(bssid, freq=2437, force_scan=True)
+ addr1 = dev[1].own_addr()
+ dev[1].connect("track", key_mgmt="NONE", scan_freq="2437")
+
+ wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
+ wpas.interface_add("wlan5")
+ wpas.request("SET model_name track test")
+ wpas.scan_for_bss(bssid, freq=2437, force_scan=True)
+ addr = wpas.own_addr()
+ wpas.connect("track", key_mgmt="NONE", scan_freq="2437")
+
+ if "FAIL" not in hapd.request("SIGNATURE abc"):
+ raise Exception("SIGNATURE failure not reported (1)")
+ if "FAIL" not in hapd.request("SIGNATURE 22:33:44:55:66:77"):
+ raise Exception("SIGNATURE failure not reported (2)")
+
+ res = hapd.request("SIGNATURE " + addr0)
+ logger.info("sta0: " + res)
+ if not res.startswith("wifi4|probe:"):
+ raise Exception("Unexpected SIGNATURE prefix")
+ if "|assoc:" not in res:
+ raise Exception("Missing assoc info in SIGNATURE")
+ if "wps:track_test" in res:
+ raise Exception("Unexpected WPS model name")
+
+ res = hapd.request("SIGNATURE " + addr1)
+ logger.info("sta1: " + res)
+ if not res.startswith("wifi4|probe:"):
+ raise Exception("Unexpected SIGNATURE prefix")
+ if "|assoc:" not in res:
+ raise Exception("Missing assoc info in SIGNATURE")
+ if "wps:" in res:
+ raise Exception("Unexpected WPS info")
+ if ",221(0050f2,4)," in res:
+ raise Exception("Unexpected WPS IE info")
+ if ",221(506f9a,9)," in res:
+ raise Exception("Unexpected P2P IE info")
+
+ res = hapd.request("SIGNATURE " + addr)
+ logger.info("sta: " + res)
+ if not res.startswith("wifi4|probe:"):
+ raise Exception("Unexpected SIGNATURE prefix")
+ if "|assoc:" not in res:
+ raise Exception("Missing assoc info in SIGNATURE")
+ if "wps:track_test" not in res:
+ raise Exception("Missing WPS model name")
+ if ",221(0050f2,4)," not in res:
+ raise Exception("Missing WPS IE info")
+ if ",221(506f9a,9)," not in res:
+ raise Exception("Missing P2P IE info")
+
+ addr2 = dev[2].own_addr()
+ res = hapd.request("SIGNATURE " + addr2)
+ if "FAIL" not in res:
+ raise Exception("Unexpected SIGNATURE success for sta2 (1)")
+
+ for i in range(10):
+ dev[2].request("SCAN freq=2437 passive=1")
+ ev = dev[2].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=10)
+ if ev is None:
+ raise Exception("Scan did not complete")
+ if dev[2].get_bss(bssid):
+ break
+
+ res = hapd.request("SIGNATURE " + addr2)
+ if "FAIL" not in res:
+ raise Exception("Unexpected SIGNATURE success for sta2 (2)")
+
+ dev[2].connect("track", key_mgmt="NONE", scan_freq="2437")
+
+ res = hapd.request("SIGNATURE " + addr2)
+ if "FAIL" not in res and len(res) > 0:
+ raise Exception("Unexpected SIGNATURE success for sta2 (3)")
+
+ dev[2].scan_for_bss(bssid, freq=2437, force_scan=True)
+
+ res = hapd.request("SIGNATURE " + addr2)
+ logger.info("sta2: " + res)
+ if not res.startswith("wifi4|probe:"):
+ raise Exception("Unexpected SIGNATURE prefix")
+ if "|assoc:" not in res:
+ raise Exception("Missing assoc info in SIGNATURE")
projects / thirdparty / hostap.git / blobdiff