#define DEFAULT_DISABLE_HT40 0
#define DEFAULT_DISABLE_SGI 0
#define DEFAULT_DISABLE_LDPC 0
+#define DEFAULT_TX_STBC -1 /* no change */
+#define DEFAULT_RX_STBC -1 /* no change */
#define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */
#define DEFAULT_AMPDU_FACTOR -1 /* no change */
#define DEFAULT_AMPDU_DENSITY -1 /* no change */
#define DEFAULT_USER_SELECTED_SIM 1
+#define DEFAULT_MAX_OPER_CHWIDTH -1
struct psk_list_entry {
struct dl_list list;
u8 p2p;
};
+enum wpas_mode {
+ WPAS_MODE_INFRA = 0,
+ WPAS_MODE_IBSS = 1,
+ WPAS_MODE_AP = 2,
+ WPAS_MODE_P2P_GO = 3,
+ WPAS_MODE_P2P_GROUP_FORMATION = 4,
+ WPAS_MODE_MESH = 5,
+};
+
/**
* struct wpa_ssid - Network configuration data
*
*/
char *sae_password_id;
+ struct sae_pt *pt;
+
/**
* ext_psk - PSK/passphrase name in external storage
*
struct eap_peer_config eap;
#endif /* IEEE8021X_EAPOL */
+#ifdef CONFIG_WEP
#define NUM_WEP_KEYS 4
#define MAX_WEP_KEY_LEN 16
/**
* wep_tx_keyidx - Default key index for TX frames using WEP
*/
int wep_tx_keyidx;
+#endif /* CONFIG_WEP */
/**
* proactive_key_caching - Enable proactive key caching
* CCMP, but not both), and psk must also be set (either directly or
* using ASCII passphrase).
*/
- enum wpas_mode {
- WPAS_MODE_INFRA = 0,
- WPAS_MODE_IBSS = 1,
- WPAS_MODE_AP = 2,
- WPAS_MODE_P2P_GO = 3,
- WPAS_MODE_P2P_GROUP_FORMATION = 4,
- WPAS_MODE_MESH = 5,
- } mode;
+ enum wpas_mode mode;
/**
* pbss - Whether to use PBSS. Relevant to DMG networks only.
*/
char *id_str;
-#ifdef CONFIG_IEEE80211W
/**
* ieee80211w - Whether management frame protection is enabled
*
* followed).
*/
enum mfp_options ieee80211w;
-#endif /* CONFIG_IEEE80211W */
+
+#ifdef CONFIG_OCV
+ /**
+ * ocv - Enable/disable operating channel validation
+ *
+ * If this parameter is set to 1, stations will exchange OCI element
+ * to cryptographically verify the operating channel. Setting this
+ * parameter to 0 disables this option. Default value: 0.
+ */
+ int ocv;
+#endif /* CONFIG_OCV */
/**
* frequency - Channel frequency in megahertz (MHz) for IBSS
*/
int frequency;
+ /**
+ * enable_edmg - Enable EDMG feature in STA/AP mode
+ *
+ * This flag is used for enabling the EDMG capability in STA/AP mode.
+ */
+ int enable_edmg;
+
+ /**
+ * edmg_channel - EDMG channel number
+ *
+ * This value is used to configure the EDMG channel bonding feature.
+ * In AP mode it defines the EDMG channel to start the AP on.
+ * in STA mode it defines the EDMG channel to use for connection
+ * (if supported by AP).
+ */
+ u8 edmg_channel;
+
/**
* fixed_freq - Use fixed frequency for IBSS
*/
int vht;
+ int he;
+
int max_oper_chwidth;
unsigned int vht_center_freq1;
*/
int wpa_ptk_rekey;
+ /** wpa_deny_ptk0_rekey - Control PTK0 rekeying
+ *
+ * Rekeying a pairwise key using only keyid 0 (PTK0 rekey) has many
+ * broken implementations and should be avoided when using or
+ * interacting with one.
+ *
+ * 0 = always rekey when configured/instructed
+ * 1 = only rekey when the local driver is explicitly indicating it can
+ * perform this operation without issues
+ * 2 = never allow PTK0 rekeys
+ */
+ enum ptk0_rekey_handling wpa_deny_ptk0_rekey;
+
/**
* group_rekey - Group rekeying time in seconds
*
* By default (empty string): Use whatever the OS has configured.
*/
char *ht_mcs;
+
+ /**
+ * tx_stbc - Indicate STBC support for TX streams
+ *
+ * Value: -1..1, by default (-1): use whatever the OS or card has
+ * configured. See IEEE Std 802.11-2016, 9.4.2.56.2.
+ */
+ int tx_stbc;
+
+ /**
+ * rx_stbc - Indicate STBC support for RX streams
+ *
+ * Value: -1..3, by default (-1): use whatever the OS or card has
+ * configured. See IEEE Std 802.11-2016, 9.4.2.56.2.
+ */
+ int rx_stbc;
#endif /* CONFIG_HT_OVERRIDES */
#ifdef CONFIG_VHT_OVERRIDES
*/
int macsec_integ_only;
+ /**
+ * macsec_replay_protect - Enable MACsec replay protection
+ *
+ * This setting applies only when MACsec is in use, i.e.,
+ * - macsec_policy is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: Replay protection disabled (default)
+ * 1: Replay protection enabled
+ */
+ int macsec_replay_protect;
+
+ /**
+ * macsec_replay_window - MACsec replay protection window
+ *
+ * A window in which replay is tolerated, to allow receipt of frames
+ * that have been misordered by the network.
+ *
+ * This setting applies only when MACsec replay protection active, i.e.,
+ * - macsec_replay_protect is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: No replay window, strict check (default)
+ * 1..2^32-1: number of packets that could be misordered
+ */
+ u32 macsec_replay_window;
+
/**
* macsec_port - MACsec port (in SCI)
*
/**
* mka_ckn - MKA pre-shared CKN
*/
-#define MACSEC_CKN_LEN 32
- u8 mka_ckn[MACSEC_CKN_LEN];
+#define MACSEC_CKN_MAX_LEN 32
+ size_t mka_ckn_len;
+ u8 mka_ckn[MACSEC_CKN_MAX_LEN];
/**
* mka_cak - MKA pre-shared CAK
*/
-#define MACSEC_CAK_LEN 16
- u8 mka_cak[MACSEC_CAK_LEN];
+#define MACSEC_CAK_MAX_LEN 32
+ size_t mka_cak_len;
+ u8 mka_cak[MACSEC_CAK_MAX_LEN];
#define MKA_PSK_SET_CKN BIT(0)
#define MKA_PSK_SET_CAK BIT(1)
* 1 = disable transition mode (allow connection only with OWE)
*/
int owe_only;
+
+ /**
+ * owe_ptk_workaround - OWE PTK derivation workaround
+ *
+ * Initial OWE implementation used SHA256 when deriving the PTK for all
+ * OWE groups. This was supposed to change to SHA384 for group 20 and
+ * SHA512 for group 21. This parameter can be used to enable older
+ * behavior mainly for testing purposes. There is no impact to group 19
+ * behavior, but if enabled, this will make group 20 and 21 cases use
+ * SHA256-based PTK derivation which will not work with the updated
+ * OWE implementation on the AP side.
+ */
+ int owe_ptk_workaround;
+
+ /**
+ * owe_transition_bss_select_count - OWE transition BSS select count
+ *
+ * This is an internally used variable (i.e., not used in external
+ * configuration) to track the number of selection attempts done for
+ * OWE BSS in transition mode. This allows fallback to an open BSS if
+ * the selection attempts for OWE BSS exceed the configured threshold.
+ */
+ int owe_transition_bss_select_count;
+
+ /**
+ * multi_ap_backhaul_sta - Multi-AP backhaul STA
+ * 0 = normal (non-Multi-AP) station
+ * 1 = Multi-AP backhaul station
+ */
+ int multi_ap_backhaul_sta;
+
+ /**
+ * ft_eap_pmksa_caching - Whether FT-EAP PMKSA caching is allowed
+ * 0 = do not try to use PMKSA caching with FT-EAP
+ * 1 = try to use PMKSA caching with FT-EAP
+ *
+ * This controls whether to try to use PMKSA caching with FT-EAP for the
+ * FT initial mobility domain association.
+ */
+ int ft_eap_pmksa_caching;
+
+ /**
+ * beacon_prot - Whether Beacon protection is enabled
+ *
+ * This depends on management frame protection (ieee80211w) being
+ * enabled.
+ */
+ int beacon_prot;
+
+ /**
+ * transition_disable - Transition Disable indication
+ * The AP can notify authenticated stations to disable transition mode
+ * in their network profiles when the network has completed transition
+ * steps, i.e., once sufficiently large number of APs in the ESS have
+ * been updated to support the more secure alternative. When this
+ * indication is used, the stations are expected to automatically
+ * disable transition mode and less secure security options. This
+ * includes use of WEP, TKIP (including use of TKIP as the group
+ * cipher), and connections without PMF.
+ * Bitmap bits:
+ * bit 0 (0x01): WPA3-Personal (i.e., disable WPA2-Personal = WPA-PSK
+ * and only allow SAE to be used)
+ * bit 1 (0x02): SAE-PK (disable SAE without use of SAE-PK)
+ * bit 2 (0x04): WPA3-Enterprise (move to requiring PMF)
+ * bit 3 (0x08): Enhanced Open (disable use of open network; require
+ * OWE)
+ */
+ u8 transition_disable;
};
#endif /* CONFIG_SSID_H */
projects / thirdparty / hostap.git / blobdiff