extern void tbreak_at_finish_command (char *, int);
-static void break_command_1 (char *, int, int);
+static int break_command_1 (char *, int, int, struct breakpoint *);
static void mention (struct breakpoint *);
static int get_number_trailer (char **, int);
+static int do_captured_parse_breakpoint (struct ui_out *, void *);
+
void set_breakpoint_count (int);
typedef enum
static int
breakpoint_enabled (struct breakpoint *b)
{
- return b->enable_state == bp_enabled;
+ return (b->enable_state == bp_enabled && !b->pending);
}
/* Set breakpoint count to NUM. */
/* I don't know if it matters whether this is the string the user
typed in or the decompiled expression. */
b->cond_string = savestring (arg, strlen (arg));
- b->cond = parse_exp_1 (&arg, block_for_pc (b->loc->address), 0);
- if (*arg)
- error ("Junk at end of expression");
+ if (!b->pending)
+ {
+ b->cond = parse_exp_1 (&arg, block_for_pc (b->loc->address), 0);
+ if (*arg)
+ error ("Junk at end of expression");
+ }
}
breakpoints_changed ();
breakpoint_modify_event (b->number);
if (addressprint)
{
annotate_field (4);
- ui_out_field_core_addr (uiout, "addr", b->loc->address);
+ if (b->pending)
+ {
+ ui_out_field_string (uiout, "addr", "<PENDING>");
+ if (TARGET_ADDR_BIT <= 32)
+ ui_out_spaces (uiout, 2);
+ else
+ ui_out_spaces (uiout, 8);
+ }
+ else
+ ui_out_field_core_addr (uiout, "addr", b->loc->address);
}
annotate_field (5);
*last_addr = b->loc->address;
ui_out_text (uiout, ":");
ui_out_field_int (uiout, "line", b->line_number);
}
+ else if (b->pending)
+ {
+ ui_out_field_string (uiout, "pending", b->addr_string);
+ }
else
{
print_address_symbolic (b->loc->address, stb->stream, demangle, "");
ui_out_field_stream (uiout, "cond", stb);
ui_out_text (uiout, "\n");
}
-
+
+ if (b->pending && b->cond_string)
+ {
+ annotate_field (7);
+ ui_out_text (uiout, "\tstop only if ");
+ ui_out_field_string (uiout, "cond", b->cond_string);
+ ui_out_text (uiout, "\n");
+ }
+
if (b->thread != -1)
{
/* FIXME should make an annotation for this */
ALL_BREAKPOINTS (b)
if (b->loc->address == pc) /* address match / overlay match */
- if (!overlay_debugging || b->loc->section == section)
+ if (!b->pending && (!overlay_debugging || b->loc->section == section))
others++;
if (others > 0)
{
printf_filtered ("Note: breakpoint%s ", (others > 1) ? "s" : "");
ALL_BREAKPOINTS (b)
if (b->loc->address == pc) /* address match / overlay match */
- if (!overlay_debugging || b->loc->section == section)
+ if (!b->pending && (!overlay_debugging || b->loc->section == section))
{
others--;
printf_filtered ("%d%s%s ",
ALL_BP_LOCATIONS (b)
if (b->owner->enable_state != bp_disabled
&& b->owner->enable_state != bp_shlib_disabled
+ && !b->owner->pending
&& b->owner->enable_state != bp_call_disabled
&& b->address == address /* address / overlay match */
&& (!overlay_debugging || b->section == section)
{
if (b->owner->enable_state != bp_disabled
&& b->owner->enable_state != bp_shlib_disabled
+ && !b->owner->pending
&& b->owner->enable_state != bp_call_disabled
&& b->address == address /* address / overlay match */
&& (!overlay_debugging || b->section == section)
b->forked_inferior_pid = 0;
b->exec_pathname = NULL;
b->ops = NULL;
+ b->pending = 0;
/* Add this breakpoint to the end of the chain
so that a list of breakpoints will come out in order
}
}
+struct captured_parse_breakpoint_args
+ {
+ char **arg_p;
+ struct symtabs_and_lines *sals_p;
+ char ***addr_string_p;
+ int *not_found_ptr;
+ };
+
+struct lang_and_radix
+ {
+ enum language lang;
+ int radix;
+ };
+
+/* Cleanup helper routine to restore the current language and
+ input radix. */
+static void
+do_restore_lang_radix_cleanup (void *old)
+{
+ struct lang_and_radix *p = old;
+ set_language (p->lang);
+ input_radix = p->radix;
+}
+
+/* Try and resolve a pending breakpoint. */
+static int
+resolve_pending_breakpoint (struct breakpoint *b)
+{
+ /* Try and reparse the breakpoint in case the shared library
+ is now loaded. */
+ struct symtabs_and_lines sals;
+ struct symtab_and_line pending_sal;
+ char **cond_string = (char **) NULL;
+ char *copy_arg = b->addr_string;
+ char **addr_string;
+ char *errmsg;
+ int rc;
+ int not_found = 0;
+ struct ui_file *old_gdb_stderr;
+ struct lang_and_radix old_lr;
+ struct cleanup *old_chain;
+
+ /* Set language, input-radix, then reissue breakpoint command.
+ Ensure the language and input-radix are restored afterwards. */
+ old_lr.lang = current_language->la_language;
+ old_lr.radix = input_radix;
+ old_chain = make_cleanup (do_restore_lang_radix_cleanup, &old_lr);
+
+ set_language (b->language);
+ input_radix = b->input_radix;
+ rc = break_command_1 (b->addr_string, b->flag, b->from_tty, b);
+
+ if (rc == GDB_RC_OK)
+ /* Pending breakpoint has been resolved. */
+ printf_filtered ("Pending breakpoint \"%s\" resolved\n", b->addr_string);
+
+ do_cleanups (old_chain);
+ return rc;
+}
+
/* Try to reenable any breakpoints in shared libraries. */
void
re_enable_breakpoints_in_shlibs (void)
{
- struct breakpoint *b;
+ struct breakpoint *b, *tmp;
- ALL_BREAKPOINTS (b)
+ ALL_BREAKPOINTS_SAFE (b, tmp)
+ {
if (b->enable_state == bp_shlib_disabled)
- {
- char buf[1], *lib;
-
- /* Do not reenable the breakpoint if the shared library
- is still not mapped in. */
- lib = PC_SOLIB (b->loc->address);
- if (lib != NULL && target_read_memory (b->loc->address, buf, 1) == 0)
- b->enable_state = bp_enabled;
- }
+ {
+ char buf[1], *lib;
+
+ /* Do not reenable the breakpoint if the shared library
+ is still not mapped in. */
+ lib = PC_SOLIB (b->loc->address);
+ if (lib != NULL && target_read_memory (b->loc->address, buf, 1) == 0)
+ b->enable_state = bp_enabled;
+ }
+ else if (b->pending && (b->enable_state == bp_enabled))
+ {
+ if (resolve_pending_breakpoint (b) == GDB_RC_OK)
+ delete_breakpoint (b);
+ }
+ }
}
#endif
if (say_where)
{
- if (addressprint || b->source_file == NULL)
+ if (b->pending)
{
- printf_filtered (" at ");
- print_address_numeric (b->loc->address, 1, gdb_stdout);
+ printf_filtered (" (%s) pending.", b->addr_string);
+ }
+ else
+ {
+ if (addressprint || b->source_file == NULL)
+ {
+ printf_filtered (" at ");
+ print_address_numeric (b->loc->address, 1, gdb_stdout);
+ }
+ if (b->source_file)
+ printf_filtered (": file %s, line %d.",
+ b->source_file, b->line_number);
}
- if (b->source_file)
- printf_filtered (": file %s, line %d.",
- b->source_file, b->line_number);
}
do_cleanups (old_chain);
if (ui_out_is_mi_like_p (uiout))
SALS.sal[i] breakpoint, include the corresponding ADDR_STRING[i],
COND[i] and COND_STRING[i] values.
+ The parameter PENDING_BP points to a pending breakpoint that is
+ the basis of the breakpoints currently being created. The pending
+ breakpoint may contain a separate condition string or commands
+ that were added after the initial pending breakpoint was created.
+
NOTE: If the function succeeds, the caller is expected to cleanup
the arrays ADDR_STRING, COND_STRING, COND and SALS (but not the
array contents). If the function fails (error() is called), the
create_breakpoints (struct symtabs_and_lines sals, char **addr_string,
struct expression **cond, char **cond_string,
enum bptype type, enum bpdisp disposition,
- int thread, int ignore_count, int from_tty)
+ int thread, int ignore_count, int from_tty,
+ struct breakpoint *pending_bp)
{
if (type == bp_hardware_breakpoint)
{
b->ignore_count = ignore_count;
b->enable_state = bp_enabled;
b->disposition = disposition;
+ /* If resolving a pending breakpoint, a check must be made to see if
+ the user has specified a new condition or commands for the
+ breakpoint. A new condition will override any condition that was
+ initially specified with the initial breakpoint command. */
+ if (pending_bp)
+ {
+ char *arg;
+ if (pending_bp->cond_string)
+ {
+ arg = pending_bp->cond_string;
+ b->cond_string = savestring (arg, strlen (arg));
+ b->cond = parse_exp_1 (&arg, block_for_pc (b->loc->address), 0);
+ if (*arg)
+ error ("Junk at end of pending breakpoint condition expression");
+ }
+ /* If there are commands associated with the breakpoint, they should
+ be copied too. */
+ if (pending_bp->commands)
+ b->commands = copy_command_lines (pending_bp->commands);
+ }
mention (b);
}
}
static void
parse_breakpoint_sals (char **address,
struct symtabs_and_lines *sals,
- char ***addr_string)
+ char ***addr_string,
+ int *not_found_ptr)
{
char *addr_start = *address;
*addr_string = NULL;
|| ((strchr ("+-", (*address)[0]) != NULL)
&& ((*address)[1] != '['))))
*sals = decode_line_1 (address, 1, default_breakpoint_symtab,
- default_breakpoint_line, addr_string, NULL);
+ default_breakpoint_line, addr_string,
+ not_found_ptr);
else
- *sals = decode_line_1 (address, 1, (struct symtab *) NULL, 0, addr_string, NULL);
+ *sals = decode_line_1 (address, 1, (struct symtab *) NULL, 0,
+ addr_string, not_found_ptr);
}
/* For any SAL that didn't have a canonical string, fill one in. */
if (sals->nelts > 0 && *addr_string == NULL)
}
}
+static int
+do_captured_parse_breakpoint (struct ui_out *ui, void *data)
+{
+ struct captured_parse_breakpoint_args *args = data;
+
+ parse_breakpoint_sals (args->arg_p, args->sals_p, args->addr_string_p,
+ args->not_found_ptr);
+
+ return GDB_RC_OK;
+}
+
/* Set a breakpoint according to ARG (function, linenum or *address)
flag: first bit : 0 non-temporary, 1 temporary.
- second bit : 0 normal breakpoint, 1 hardware breakpoint. */
+ second bit : 0 normal breakpoint, 1 hardware breakpoint.
-static void
-break_command_1 (char *arg, int flag, int from_tty)
+ PENDING_BP is non-NULL when this function is being called to resolve
+ a pending breakpoint. */
+
+static int
+break_command_1 (char *arg, int flag, int from_tty, struct breakpoint *pending_bp)
{
int tempflag, hardwareflag;
struct symtabs_and_lines sals;
struct expression **cond = 0;
- /* Pointers in arg to the start, and one past the end, of the
- condition. */
+ struct symtab_and_line pending_sal;
char **cond_string = (char **) NULL;
+ char *copy_arg;
+ char *err_msg;
char *addr_start = arg;
char **addr_string;
struct cleanup *old_chain;
struct cleanup *breakpoint_chain = NULL;
- int i;
+ struct captured_parse_breakpoint_args parse_args;
+ int i, rc;
+ int pending = 0;
int thread = -1;
int ignore_count = 0;
+ int not_found = 0;
hardwareflag = flag & BP_HARDWAREFLAG;
tempflag = flag & BP_TEMPFLAG;
sals.sals = NULL;
sals.nelts = 0;
addr_string = NULL;
- parse_breakpoint_sals (&arg, &sals, &addr_string);
- if (!sals.nelts)
- return;
+ parse_args.arg_p = &arg;
+ parse_args.sals_p = &sals;
+ parse_args.addr_string_p = &addr_string;
+ parse_args.not_found_ptr = ¬_found;
+
+ rc = catch_exceptions_with_msg (uiout, do_captured_parse_breakpoint,
+ &parse_args, NULL, &err_msg,
+ RETURN_MASK_ALL);
+
+ /* If caller is interested in rc value from parse, set value. */
+
+ if (rc != GDB_RC_OK)
+ {
+ /* Check for file or function not found. */
+ if (not_found)
+ {
+ /* If called to resolve pending breakpoint, just return error code. */
+ if (pending_bp)
+ return rc;
+
+ error_output_message (NULL, err_msg);
+ xfree (err_msg);
+ if (!query ("Make breakpoint pending on future shared library load? "))
+ return rc;
+ copy_arg = xstrdup (addr_start);
+ addr_string = ©_arg;
+ sals.nelts = 1;
+ sals.sals = &pending_sal;
+ pending_sal.pc = 0;
+ pending = 1;
+ }
+ else
+ return rc;
+ }
+ else if (!sals.nelts)
+ return GDB_RC_FAIL;
/* Create a chain of things that always need to be cleaned up. */
old_chain = make_cleanup (null_cleanup, 0);
- /* Make sure that all storage allocated to SALS gets freed. */
- make_cleanup (xfree, sals.sals);
-
- /* Cleanup the addr_string array but not its contents. */
- make_cleanup (xfree, addr_string);
+ if (!pending)
+ {
+ /* Make sure that all storage allocated to SALS gets freed. */
+ make_cleanup (xfree, sals.sals);
+
+ /* Cleanup the addr_string array but not its contents. */
+ make_cleanup (xfree, addr_string);
+ }
/* Allocate space for all the cond expressions. */
cond = xcalloc (sals.nelts, sizeof (struct expression *));
/* Resolve all line numbers to PC's and verify that the addresses
are ok for the target. */
- breakpoint_sals_to_pc (&sals, addr_start);
+ if (!pending)
+ breakpoint_sals_to_pc (&sals, addr_start);
/* Verify that condition can be parsed, before setting any
breakpoints. Allocate a separate condition expression for each
breakpoint. */
thread = -1; /* No specific thread yet */
- for (i = 0; i < sals.nelts; i++)
+ if (!pending)
{
- char *tok = arg;
- while (tok && *tok)
+ for (i = 0; i < sals.nelts; i++)
{
- char *end_tok;
- int toklen;
- char *cond_start = NULL;
- char *cond_end = NULL;
- while (*tok == ' ' || *tok == '\t')
- tok++;
-
- end_tok = tok;
-
- while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
- end_tok++;
-
- toklen = end_tok - tok;
-
- if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
+ char *tok = arg;
+ while (tok && *tok)
{
- tok = cond_start = end_tok + 1;
- cond[i] = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
- make_cleanup (xfree, cond[i]);
- cond_end = tok;
- cond_string[i] = savestring (cond_start, cond_end - cond_start);
- make_cleanup (xfree, cond_string[i]);
- }
- else if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
- {
- char *tmptok;
-
- tok = end_tok + 1;
- tmptok = tok;
- thread = strtol (tok, &tok, 0);
- if (tok == tmptok)
- error ("Junk after thread keyword.");
- if (!valid_thread_id (thread))
- error ("Unknown thread %d\n", thread);
+ char *end_tok;
+ int toklen;
+ char *cond_start = NULL;
+ char *cond_end = NULL;
+ while (*tok == ' ' || *tok == '\t')
+ tok++;
+
+ end_tok = tok;
+
+ while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
+ end_tok++;
+
+ toklen = end_tok - tok;
+
+ if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
+ {
+ tok = cond_start = end_tok + 1;
+ cond[i] = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc),
+ 0);
+ make_cleanup (xfree, cond[i]);
+ cond_end = tok;
+ cond_string[i] = savestring (cond_start,
+ cond_end - cond_start);
+ make_cleanup (xfree, cond_string[i]);
+ }
+ else if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
+ {
+ char *tmptok;
+
+ tok = end_tok + 1;
+ tmptok = tok;
+ thread = strtol (tok, &tok, 0);
+ if (tok == tmptok)
+ error ("Junk after thread keyword.");
+ if (!valid_thread_id (thread))
+ error ("Unknown thread %d\n", thread);
+ }
+ else
+ error ("Junk at end of arguments.");
}
- else
- error ("Junk at end of arguments.");
}
+ create_breakpoints (sals, addr_string, cond, cond_string,
+ hardwareflag ? bp_hardware_breakpoint
+ : bp_breakpoint,
+ tempflag ? disp_del : disp_donttouch,
+ thread, ignore_count, from_tty,
+ pending_bp);
}
-
- create_breakpoints (sals, addr_string, cond, cond_string,
- hardwareflag ? bp_hardware_breakpoint : bp_breakpoint,
- tempflag ? disp_del : disp_donttouch,
- thread, ignore_count, from_tty);
-
+ else
+ {
+ struct symtab_and_line sal;
+ struct breakpoint *b;
+
+ sal.symtab = NULL;
+ sal.pc = 0;
+
+ make_cleanup (xfree, copy_arg);
+
+ b = set_raw_breakpoint (sal, hardwareflag ? bp_hardware_breakpoint
+ : bp_breakpoint);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->cond = *cond;
+ b->thread = thread;
+ b->addr_string = *addr_string;
+ b->cond_string = *cond_string;
+ b->ignore_count = ignore_count;
+ b->pending = 1;
+ b->disposition = tempflag ? disp_del : disp_donttouch;
+ b->from_tty = from_tty;
+ b->flag = flag;
+ mention (b);
+ }
+
if (sals.nelts > 1)
{
warning ("Multiple breakpoints were set.");
discard_cleanups (breakpoint_chain);
/* But cleanup everything else. */
do_cleanups (old_chain);
+
+ return GDB_RC_OK;
}
/* Set a breakpoint of TYPE/DISPOSITION according to ARG (function,
sals.nelts = 0;
address_end = args->address;
addr_string = NULL;
- parse_breakpoint_sals (&address_end, &sals, &addr_string);
+ parse_breakpoint_sals (&address_end, &sals, &addr_string, 0);
if (!sals.nelts)
return GDB_RC_NONE;
create_breakpoints (sals, addr_string, cond, cond_string,
args->hardwareflag ? bp_hardware_breakpoint : bp_breakpoint,
args->tempflag ? disp_del : disp_donttouch,
- args->thread, args->ignore_count, 0/*from-tty*/);
+ args->thread, args->ignore_count, 0/*from-tty*/,
+ NULL/*pending_bp*/);
/* That's it. Discard the cleanups for data inserted into the
breakpoint. */
addr_string = xstrprintf ("*0x%s %s", paddr_nz (high), extra_args);
else
addr_string = xstrprintf ("*0x%s", paddr_nz (high));
- break_command_1 (addr_string, flag, from_tty);
+ break_command_1 (addr_string, flag, from_tty, NULL);
xfree (addr_string);
}
else
extra_args);
else
break_string = xstrprintf ("*0x%s", paddr_nz (high));
- break_command_1 (break_string, flag, from_tty);
+ break_command_1 (break_string, flag, from_tty, NULL);
xfree (break_string);
}
else
void
break_command (char *arg, int from_tty)
{
- break_command_1 (arg, 0, from_tty);
+ break_command_1 (arg, 0, from_tty, NULL);
}
void
void
tbreak_command (char *arg, int from_tty)
{
- break_command_1 (arg, BP_TEMPFLAG, from_tty);
+ break_command_1 (arg, BP_TEMPFLAG, from_tty, NULL);
}
void
static void
hbreak_command (char *arg, int from_tty)
{
- break_command_1 (arg, BP_HARDWAREFLAG, from_tty);
+ break_command_1 (arg, BP_HARDWAREFLAG, from_tty, NULL);
}
static void
thbreak_command (char *arg, int from_tty)
{
- break_command_1 (arg, (BP_TEMPFLAG | BP_HARDWAREFLAG), from_tty);
+ break_command_1 (arg, (BP_TEMPFLAG | BP_HARDWAREFLAG), from_tty, NULL);
}
static void
if (badInput)
printf_filtered ("Usage: stop in <function | address>\n");
else
- break_command_1 (arg, 0, from_tty);
+ break_command_1 (arg, 0, from_tty, NULL);
}
static void
if (badInput)
printf_filtered ("Usage: stop at <line>\n");
else
- break_command_1 (arg, 0, from_tty);
+ break_command_1 (arg, 0, from_tty, NULL);
}
/* accessflag: hw_write: watch write,
&& !b->loc->duplicate
&& b->enable_state != bp_disabled
&& b->enable_state != bp_shlib_disabled
+ && !b->pending
&& b->enable_state != bp_call_disabled)
{
int val;
shlib_disabled breakpoint though. There's a fair chance we
can't re-set it if the shared library it's in hasn't been
loaded yet. */
+
+ if (b->pending)
+ break;
+
save_enable = b->enable_state;
if (b->enable_state != bp_shlib_disabled)
b->enable_state = bp_disabled;
error ("Hardware breakpoints used exceeds limit.");
}
- if (bpt->enable_state != bp_permanent)
- bpt->enable_state = bp_enabled;
- bpt->disposition = disposition;
- check_duplicates (bpt);
- breakpoints_changed ();
-
- if (bpt->type == bp_watchpoint ||
- bpt->type == bp_hardware_watchpoint ||
- bpt->type == bp_read_watchpoint ||
- bpt->type == bp_access_watchpoint)
+ if (bpt->pending)
{
- if (bpt->exp_valid_block != NULL)
+ if (bpt->enable_state != bp_enabled)
{
- struct frame_info *fr =
- fr = frame_find_by_id (bpt->watchpoint_frame);
- if (fr == NULL)
+ /* When enabling a pending breakpoint, we need to check if the breakpoint
+ is resolvable since shared libraries could have been loaded
+ after the breakpoint was disabled. */
+ breakpoints_changed ();
+ if (resolve_pending_breakpoint (bpt) == GDB_RC_OK)
{
- printf_filtered ("\
-Cannot enable watchpoint %d because the block in which its expression\n\
-is valid is not currently in scope.\n", bpt->number);
- bpt->enable_state = bp_disabled;
+ delete_breakpoint (bpt);
return;
}
-
- save_selected_frame = deprecated_selected_frame;
- save_selected_frame_level = frame_relative_level (deprecated_selected_frame);
- select_frame (fr);
+ bpt->enable_state = bp_enabled;
+ bpt->disposition = disposition;
}
-
- value_free (bpt->val);
- mark = value_mark ();
- bpt->val = evaluate_expression (bpt->exp);
- release_value (bpt->val);
- if (VALUE_LAZY (bpt->val))
- value_fetch_lazy (bpt->val);
-
- if (bpt->type == bp_hardware_watchpoint ||
- bpt->type == bp_read_watchpoint ||
+ }
+ else /* Not a pending breakpoint. */
+ {
+ if (bpt->enable_state != bp_permanent)
+ bpt->enable_state = bp_enabled;
+ bpt->disposition = disposition;
+ check_duplicates (bpt);
+ breakpoints_changed ();
+
+ if (bpt->type == bp_watchpoint ||
+ bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint ||
bpt->type == bp_access_watchpoint)
{
- int i = hw_watchpoint_used_count (bpt->type, &other_type_used);
- int mem_cnt = can_use_hardware_watchpoint (bpt->val);
-
- /* Hack around 'unused var' error for some targets here */
- (void) mem_cnt, i;
- target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT (
- bpt->type, i + mem_cnt, other_type_used);
- /* we can consider of type is bp_hardware_watchpoint, convert to
- bp_watchpoint in the following condition */
- if (target_resources_ok < 0)
+ if (bpt->exp_valid_block != NULL)
+ {
+ struct frame_info *fr =
+ fr = frame_find_by_id (bpt->watchpoint_frame);
+ if (fr == NULL)
+ {
+ printf_filtered ("\
+Cannot enable watchpoint %d because the block in which its expression\n\
+is valid is not currently in scope.\n", bpt->number);
+ bpt->enable_state = bp_disabled;
+ return;
+ }
+
+ save_selected_frame = deprecated_selected_frame;
+ save_selected_frame_level = frame_relative_level (deprecated_selected_frame);
+ select_frame (fr);
+ }
+
+ value_free (bpt->val);
+ mark = value_mark ();
+ bpt->val = evaluate_expression (bpt->exp);
+ release_value (bpt->val);
+ if (VALUE_LAZY (bpt->val))
+ value_fetch_lazy (bpt->val);
+
+ if (bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint ||
+ bpt->type == bp_access_watchpoint)
{
- printf_filtered ("\
+ int i = hw_watchpoint_used_count (bpt->type, &other_type_used);
+ int mem_cnt = can_use_hardware_watchpoint (bpt->val);
+
+ /* Hack around 'unused var' error for some targets here */
+ (void) mem_cnt, i;
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT (
+ bpt->type, i + mem_cnt, other_type_used);
+ /* we can consider of type is bp_hardware_watchpoint, convert to
+ bp_watchpoint in the following condition */
+ if (target_resources_ok < 0)
+ {
+ printf_filtered ("\
Cannot enable watchpoint %d because target watch resources\n\
have been allocated for other watchpoints.\n", bpt->number);
- bpt->enable_state = bp_disabled;
- value_free_to_mark (mark);
- return;
+ bpt->enable_state = bp_disabled;
+ value_free_to_mark (mark);
+ return;
+ }
}
+
+ if (save_selected_frame_level >= 0)
+ select_frame (save_selected_frame);
+ value_free_to_mark (mark);
}
-
- if (save_selected_frame_level >= 0)
- select_frame (save_selected_frame);
- value_free_to_mark (mark);
}
+
if (modify_breakpoint_hook)
modify_breakpoint_hook (bpt);
breakpoint_modify_event (bpt->number);
projects / thirdparty / binutils-gdb.git / commitdiff
