#define POP_FRAME sparc_pop_frame ()
void sparc_push_dummy_frame PARAMS ((void)), sparc_pop_frame PARAMS ((void));
+
/* This sequence of words is the instructions
- save %sp,-0x140,%sp
- std %f30,[%fp-0x08]
- std %f28,[%fp-0x10]
- std %f26,[%fp-0x18]
- std %f24,[%fp-0x20]
- std %f22,[%fp-0x28]
- std %f20,[%fp-0x30]
- std %f18,[%fp-0x38]
- std %f16,[%fp-0x40]
- std %f14,[%fp-0x48]
- std %f12,[%fp-0x50]
- std %f10,[%fp-0x58]
- std %f8,[%fp-0x60]
- std %f6,[%fp-0x68]
- std %f4,[%fp-0x70]
- std %f2,[%fp-0x78]
- std %f0,[%fp-0x80]
- std %g6,[%fp-0x88]
- std %g4,[%fp-0x90]
- std %g2,[%fp-0x98]
- std %g0,[%fp-0xa0]
- std %i6,[%fp-0xa8]
- std %i4,[%fp-0xb0]
- std %i2,[%fp-0xb8]
- std %i0,[%fp-0xc0]
- nop ! stcsr [%fp-0xc4]
- nop ! stfsr [%fp-0xc8]
- nop ! wr %npc,[%fp-0xcc]
- nop ! wr %pc,[%fp-0xd0]
- rd %tbr,%o0
- st %o0,[%fp-0xd4]
- rd %wim,%o1
- st %o0,[%fp-0xd8]
- rd %psr,%o0
- st %o0,[%fp-0xdc]
- rd %y,%o0
- st %o0,[%fp-0xe0]
-
- /..* The arguments are pushed at this point by GDB;
- no code is needed in the dummy for this.
- The CALL_DUMMY_START_OFFSET gives the position of
- the following ld instruction. *../
-
- ld [%sp+0x58],%o5
- ld [%sp+0x54],%o4
- ld [%sp+0x50],%o3
- ld [%sp+0x4c],%o2
- ld [%sp+0x48],%o1
- call 0x00000000
- ld [%sp+0x44],%o0
- nop
- ta 1
- nop
-
- note that this is 192 bytes, which is a multiple of 8 (not only 4) bytes.
- note that the `call' insn is a relative, not an absolute call.
- note that the `nop' at the end is needed to keep the trap from
- clobbering things (if NPC pointed to garbage instead).
-
-We actually start executing at the `sethi', since the pushing of the
-registers (as arguments) is done by PUSH_DUMMY_FRAME. If this were
-real code, the arguments for the function called by the CALL would be
-pushed between the list of ST insns and the CALL, and we could allow
-it to execute through. But the arguments have to be pushed by GDB
-after the PUSH_DUMMY_FRAME is done, and we cannot allow these ST
-insns to be performed again, lest the registers saved be taken for
-arguments. */
-
-#define CALL_DUMMY { 0x9de3bee0, 0xfd3fbff8, 0xf93fbff0, 0xf53fbfe8, \
- 0xf13fbfe0, 0xed3fbfd8, 0xe93fbfd0, 0xe53fbfc8, \
- 0xe13fbfc0, 0xdd3fbfb8, 0xd93fbfb0, 0xd53fbfa8, \
- 0xd13fbfa0, 0xcd3fbf98, 0xc93fbf90, 0xc53fbf88, \
- 0xc13fbf80, 0xcc3fbf78, 0xc83fbf70, 0xc43fbf68, \
- 0xc03fbf60, 0xfc3fbf58, 0xf83fbf50, 0xf43fbf48, \
- 0xf03fbf40, 0x01000000, 0x01000000, 0x01000000, \
- 0x01000000, 0x91580000, 0xd027bf50, 0x93500000, \
- 0xd027bf4c, 0x91480000, 0xd027bf48, 0x91400000, \
- 0xd027bf44, 0xda03a058, 0xd803a054, 0xd603a050, \
- 0xd403a04c, 0xd203a048, 0x40000000, 0xd003a044, \
- 0x01000000, 0x91d02001, 0x01000000, 0x01000000}
-
-#define CALL_DUMMY_LENGTH 192
-
-#define CALL_DUMMY_START_OFFSET 148
-
-#define CALL_DUMMY_BREAKPOINT_OFFSET (CALL_DUMMY_START_OFFSET + (8 * 4))
+ 0: mov %g1, %fp
+ 4: save %sp, %g0, %sp
+ 8: mov %g2, %fp
+12: mov %g3, %i7
+16: ld [%sp+0x58],%o5
+20: ld [%sp+0x54],%o4
+24: ld [%sp+0x50],%o3
+28: ld [%sp+0x4c],%o2
+32: ld [%sp+0x48],%o1
+36: call 0x00000000
+40: ld [%sp+0x44],%o0
+44: nop
+48: ta 1
+52: nop
+
+ NOTES:
+ * the first four instructions are necessary only on the simulator.
+ * this is a multiple of 8 (not only 4) bytes.
+ * the `call' insn is a relative, not an absolute call.
+ * the `nop' at the end is needed to keep the trap from
+ clobbering things (if NPC pointed to garbage instead).
+*/
+
+#define CALL_DUMMY { 0xbc100001, 0x9de38000, 0xbc100002, 0xbe100003, \
+ 0xda03a058, 0xd803a054, 0xd603a050, 0xd403a04c, \
+ 0xd203a048, 0x40000000, 0xd003a044, 0x01000000, \
+ 0x91d02001, 0x01000000 }
+
+
+/* Size of the call dummy in bytes. */
+
+#define CALL_DUMMY_LENGTH 56
+
+/* Offset within call dummy of first instruction to execute. */
+
+#define CALL_DUMMY_START_OFFSET 0
+
+/* Offset within CALL_DUMMY of the 'call' instruction. */
+
+#define CALL_DUMMY_CALL_OFFSET (CALL_DUMMY_START_OFFSET + 36)
+
+/* Offset within CALL_DUMMY of the 'ta 1' instruction. */
+
+#define CALL_DUMMY_BREAKPOINT_OFFSET (CALL_DUMMY_START_OFFSET + 48)
#define CALL_DUMMY_STACK_ADJUST 68
/* Insert the specified number of args and function address
- into a call sequence of the above form stored at DUMMYNAME.
-
- For structs and unions, if the function was compiled with Sun cc,
- it expects 'unimp' after the call. But gcc doesn't use that
- (twisted) convention. So leave a nop there for gcc (FIX_CALL_DUMMY
- can assume it is operating on a pristine CALL_DUMMY, not one that
- has already been customized for a different function). */
-
-#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
-{ \
- store_unsigned_integer (dummyname + 168, 4, \
- (0x40000000 \
- | (((fun - (pc + 168)) >> 2) & 0x3fffffff))); \
- if (!gcc_p \
- && (TYPE_CODE (type) == TYPE_CODE_STRUCT \
- || TYPE_CODE (type) == TYPE_CODE_UNION)) \
- store_unsigned_integer (dummyname + 176, 4, TYPE_LENGTH (type) & 0x1fff); \
-}
+ into a call sequence of the above form stored at DUMMYNAME. */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
+ sparc_fix_call_dummy (dummyname, pc, fun, type, gcc_p)
+void sparc_fix_call_dummy PARAMS ((char *dummy, CORE_ADDR pc, CORE_ADDR fun,
+ struct type *value_type, int using_gcc));
/* The Sparc returns long doubles on the stack. */
projects / thirdparty / binutils-gdb.git / commitdiff
