configs: j7200_evm_a72_defconfig: Enable DP83867 Ethernet PHY

The MCU Ethernet Interface on J7200-EVM uses the DP83867 Ethernet PHY as
described in the section '4.9 MCU Ethernet Interface' of the J7200-EVM
User-Guide [0]. Since the config corresponding to the DP83867 PHY has not
been enabled, the Generic PHY driver is used. As a result, the RGMII delays
do not take effect leading to packet losses.

Fix this by enabling the config for the DP83867 Ethernet PHY.

[0]: https://www.ti.com/lit/ug/spruiw7a/spruiw7a.pdf

Fixes: f8c1e893c82f ("configs: j7200_evm_a72: Add Initial support")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>

diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig
index c657b0166e07bdf34a4094411c25ddaa9e328b3c..51f0c4075c07063bc2cf9007218a160260e4a850 100644 (file)
--- a/configs/j7200_evm_a72_defconfig
+++ b/configs/j7200_evm_a72_defconfig
@@ -145,6 +145,7 @@ CONFIG_SPI_FLASH_MTD=y
 CONFIG_MULTIPLEXER=y
 CONFIG_SPL_MUX_MMIO=y
 CONFIG_MUX_MMIO=y
+CONFIG_PHY_TI_DP83867=y
 CONFIG_PHY_TI_DP83869=y
 CONFIG_PHY_FIXED=y
 CONFIG_TI_AM65_CPSW_NUSS=y