ixgbe_mbox_api_13, /* API version 1.3, linux/freebsd VF driver */
ixgbe_mbox_api_14, /* API version 1.4, linux/freebsd VF driver */
ixgbe_mbox_api_15, /* API version 1.5, linux/freebsd VF driver */
+ ixgbe_mbox_api_16, /* API version 1.6, linux/freebsd VF driver */
/* This value should always be last */
ixgbe_mbox_api_unknown, /* indicates that API version is not known */
};
#define IXGBE_VF_GET_LINK_STATE 0x10 /* get vf link state */
+/* mailbox API, version 1.6 VF requests */
+#define IXGBE_VF_GET_PF_LINK_STATE 0x11 /* request PF to send link info */
+
/* length of permanent address message returned from PF */
#define IXGBE_VF_PERMADDR_MSG_LEN 4
/* word in permanent address message with the current multicast type */
* is not supported for this device type.
*/
switch (hw->api_version) {
+ case ixgbe_mbox_api_16:
case ixgbe_mbox_api_15:
case ixgbe_mbox_api_14:
case ixgbe_mbox_api_13:
* or if the operation is not supported for this device type.
*/
switch (hw->api_version) {
+ case ixgbe_mbox_api_16:
case ixgbe_mbox_api_15:
case ixgbe_mbox_api_14:
case ixgbe_mbox_api_13:
case ixgbe_mbox_api_13:
case ixgbe_mbox_api_14:
case ixgbe_mbox_api_15:
+ case ixgbe_mbox_api_16:
break;
default:
return -EOPNOTSUPP;
return -EOPNOTSUPP;
}
+/**
+ * ixgbevf_get_pf_link_state - Get PF's link status
+ * @hw: pointer to the HW structure
+ * @speed: link speed
+ * @link_up: indicate if link is up/down
+ *
+ * Ask PF to provide link_up state and speed of the link.
+ *
+ * Return: IXGBE_ERR_MBX in the case of mailbox error,
+ * -EOPNOTSUPP if the op is not supported or 0 on success.
+ */
+static int ixgbevf_get_pf_link_state(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up)
+{
+ u32 msgbuf[3] = {};
+ int err;
+
+ switch (hw->api_version) {
+ case ixgbe_mbox_api_16:
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ msgbuf[0] = IXGBE_VF_GET_PF_LINK_STATE;
+
+ err = ixgbevf_write_msg_read_ack(hw, msgbuf, msgbuf,
+ ARRAY_SIZE(msgbuf));
+ if (err || (msgbuf[0] & IXGBE_VT_MSGTYPE_FAILURE)) {
+ err = IXGBE_ERR_MBX;
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ /* No need to set @link_up to false as it will be done by
+ * ixgbe_check_mac_link_vf().
+ */
+ } else {
+ *speed = msgbuf[1];
+ *link_up = msgbuf[2];
+ }
+
+ return err;
+}
+
/**
* ixgbevf_set_vfta_vf - Set/Unset VLAN filter table address
* @hw: pointer to the HW structure
return err;
}
+/**
+ * ixgbe_read_vflinks - Read VFLINKS register
+ * @hw: pointer to the HW structure
+ * @speed: link speed
+ * @link_up: indicate if link is up/down
+ *
+ * Get linkup status and link speed from the VFLINKS register.
+ */
+static void ixgbe_read_vflinks(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up)
+{
+ u32 vflinks = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+
+ /* if link status is down no point in checking to see if PF is up */
+ if (!(vflinks & IXGBE_LINKS_UP)) {
+ *link_up = false;
+ return;
+ }
+
+ /* for SFP+ modules and DA cables on 82599 it can take up to 500usecs
+ * before the link status is correct
+ */
+ if (hw->mac.type == ixgbe_mac_82599_vf) {
+ for (int i = 0; i < 5; i++) {
+ udelay(100);
+ vflinks = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+
+ if (!(vflinks & IXGBE_LINKS_UP)) {
+ *link_up = false;
+ return;
+ }
+ }
+ }
+
+ /* We reached this point so there's link */
+ *link_up = true;
+
+ switch (vflinks & IXGBE_LINKS_SPEED_82599) {
+ case IXGBE_LINKS_SPEED_10G_82599:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ break;
+ case IXGBE_LINKS_SPEED_1G_82599:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ case IXGBE_LINKS_SPEED_100_82599:
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+ break;
+ default:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ }
+}
+
/**
* ixgbevf_hv_set_vfta_vf - * Hyper-V variant - just a stub.
* @hw: unused
struct ixgbe_mbx_info *mbx = &hw->mbx;
struct ixgbe_mac_info *mac = &hw->mac;
s32 ret_val = 0;
- u32 links_reg;
u32 in_msg = 0;
/* If we were hit with a reset drop the link */
if (!mac->get_link_status)
goto out;
- /* if link status is down no point in checking to see if pf is up */
- links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
- if (!(links_reg & IXGBE_LINKS_UP))
- goto out;
-
- /* for SFP+ modules and DA cables on 82599 it can take up to 500usecs
- * before the link status is correct
- */
- if (mac->type == ixgbe_mac_82599_vf) {
- int i;
-
- for (i = 0; i < 5; i++) {
- udelay(100);
- links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
-
- if (!(links_reg & IXGBE_LINKS_UP))
- goto out;
- }
- }
-
- switch (links_reg & IXGBE_LINKS_SPEED_82599) {
- case IXGBE_LINKS_SPEED_10G_82599:
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
- break;
- case IXGBE_LINKS_SPEED_1G_82599:
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- break;
- case IXGBE_LINKS_SPEED_100_82599:
- *speed = IXGBE_LINK_SPEED_100_FULL;
- break;
+ if (hw->mac.type == ixgbe_mac_e610_vf) {
+ ret_val = ixgbevf_get_pf_link_state(hw, speed, link_up);
+ if (ret_val)
+ goto out;
+ } else {
+ ixgbe_read_vflinks(hw, speed, link_up);
+ if (*link_up == false)
+ goto out;
}
/* if the read failed it could just be a mailbox collision, best wait
case ixgbe_mbox_api_13:
case ixgbe_mbox_api_14:
case ixgbe_mbox_api_15:
+ case ixgbe_mbox_api_16:
break;
default:
return 0;