}
break;
- case lval_register:
- if (VALUE_BITSIZE (toval))
- {
- char buffer[sizeof (LONGEST)];
- int len =
- REGISTER_RAW_SIZE (VALUE_REGNO (toval)) - VALUE_OFFSET (toval);
-
- if (len > (int) sizeof (LONGEST))
- error ("Can't handle bitfields in registers larger than %d bits.",
- (int) sizeof (LONGEST) * HOST_CHAR_BIT);
-
- if (VALUE_BITPOS (toval) + VALUE_BITSIZE (toval)
- > len * HOST_CHAR_BIT)
- /* Getting this right would involve being very careful about
- byte order. */
- error ("Can't assign to bitfields that cross register "
- "boundaries.");
-
- read_register_bytes (VALUE_ADDRESS (toval) + VALUE_OFFSET (toval),
- buffer, len);
- modify_field (buffer, value_as_long (fromval),
- VALUE_BITPOS (toval), VALUE_BITSIZE (toval));
- write_register_bytes (VALUE_ADDRESS (toval) + VALUE_OFFSET (toval),
- buffer, len);
- }
- else if (use_buffer)
- write_register_bytes (VALUE_ADDRESS (toval) + VALUE_OFFSET (toval),
- raw_buffer, use_buffer);
- else
- {
- /* Do any conversion necessary when storing this type to more
- than one register. */
-#ifdef REGISTER_CONVERT_FROM_TYPE
- memcpy (raw_buffer, VALUE_CONTENTS (fromval), TYPE_LENGTH (type));
- REGISTER_CONVERT_FROM_TYPE (VALUE_REGNO (toval), type, raw_buffer);
- write_register_bytes (VALUE_ADDRESS (toval) + VALUE_OFFSET (toval),
- raw_buffer, TYPE_LENGTH (type));
-#else
- write_register_bytes (VALUE_ADDRESS (toval) + VALUE_OFFSET (toval),
- VALUE_CONTENTS (fromval), TYPE_LENGTH (type));
-#endif
- }
-
- target_changed_event ();
-
- /* Assigning to the stack pointer, frame pointer, and other
- (architecture and calling convention specific) registers may
- cause the frame cache to be out of date. We just do this
- on all assignments to registers for simplicity; I doubt the slowdown
- matters. */
- reinit_frame_cache ();
- break;
-
case lval_reg_frame_relative:
+ case lval_register:
{
+ struct frame_id old_frame;
/* value is stored in a series of registers in the frame
specified by the structure. Copy that value out, modify
it, and copy it back in. */
- int amount_to_copy = (VALUE_BITSIZE (toval) ? 1 : TYPE_LENGTH (type));
- int reg_size = REGISTER_RAW_SIZE (VALUE_FRAME_REGNUM (toval));
- int byte_offset = VALUE_OFFSET (toval) % reg_size;
- int reg_offset = VALUE_OFFSET (toval) / reg_size;
int amount_copied;
-
- /* Make the buffer large enough in all cases. */
- /* FIXME (alloca): Not safe for very large data types. */
- char *buffer = (char *) alloca (amount_to_copy
- + sizeof (LONGEST)
- + MAX_REGISTER_RAW_SIZE);
-
+ int amount_to_copy;
+ char *buffer;
+ int value_reg;
+ int reg_offset;
+ int byte_offset;
int regno;
struct frame_info *frame;
+ /* Since modifying a register can trash the frame chain, we
+ save the old frame and then restore the new frame
+ afterwards. */
+ get_frame_id (selected_frame, &old_frame);
+
/* Figure out which frame this is in currently. */
- for (frame = get_current_frame ();
- frame && FRAME_FP (frame) != VALUE_FRAME (toval);
- frame = get_prev_frame (frame))
- ;
+ if (VALUE_LVAL (toval) == lval_register)
+ {
+ frame = get_current_frame ();
+ value_reg = VALUE_REGNO (toval);
+ }
+ else
+ {
+ for (frame = get_current_frame ();
+ frame && FRAME_FP (frame) != VALUE_FRAME (toval);
+ frame = get_prev_frame (frame))
+ ;
+ value_reg = VALUE_FRAME_REGNUM (toval);
+ }
if (!frame)
error ("Value being assigned to is no longer active.");
- amount_to_copy += (reg_size - amount_to_copy % reg_size);
+ /* Locate the first register that falls in the value that
+ needs to be transfered. Compute the offset of the value in
+ that register. */
+ {
+ int offset;
+ for (reg_offset = value_reg, offset = 0;
+ offset + REGISTER_RAW_SIZE (reg_offset) <= VALUE_OFFSET (toval);
+ reg_offset++);
+ byte_offset = VALUE_OFFSET (toval) - offset;
+ }
- /* Copy it out. */
- for ((regno = VALUE_FRAME_REGNUM (toval) + reg_offset,
- amount_copied = 0);
+ /* Compute the number of register aligned values that need to
+ be copied. */
+ if (VALUE_BITSIZE (toval))
+ amount_to_copy = byte_offset + 1;
+ else
+ amount_to_copy = byte_offset + TYPE_LENGTH (type);
+
+ /* And a bounce buffer. Be slightly over generous. */
+ buffer = (char *) alloca (amount_to_copy
+ + MAX_REGISTER_RAW_SIZE);
+
+ /* Copy it in. */
+ for (regno = reg_offset, amount_copied = 0;
amount_copied < amount_to_copy;
- amount_copied += reg_size, regno++)
+ amount_copied += REGISTER_RAW_SIZE (regno), regno++)
{
- get_saved_register (buffer + amount_copied,
- (int *) NULL, (CORE_ADDR *) NULL,
- frame, regno, (enum lval_type *) NULL);
+ frame_register_read (frame, regno, buffer + amount_copied);
}
-
+
/* Modify what needs to be modified. */
if (VALUE_BITSIZE (toval))
- modify_field (buffer + byte_offset,
- value_as_long (fromval),
- VALUE_BITPOS (toval), VALUE_BITSIZE (toval));
+ {
+ modify_field (buffer + byte_offset,
+ value_as_long (fromval),
+ VALUE_BITPOS (toval), VALUE_BITSIZE (toval));
+ }
else if (use_buffer)
- memcpy (buffer + byte_offset, raw_buffer, use_buffer);
+ {
+ memcpy (buffer + VALUE_OFFSET (toval), raw_buffer, use_buffer);
+ }
else
- memcpy (buffer + byte_offset, VALUE_CONTENTS (fromval),
- TYPE_LENGTH (type));
+ {
+ memcpy (buffer + byte_offset, VALUE_CONTENTS (fromval),
+ TYPE_LENGTH (type));
+ /* Do any conversion necessary when storing this type to
+ more than one register. */
+#ifdef REGISTER_CONVERT_FROM_TYPE
+ REGISTER_CONVERT_FROM_TYPE (value_reg, type,
+ (buffer + byte_offset));
+#endif
+ }
- /* Copy it back. */
- for ((regno = VALUE_FRAME_REGNUM (toval) + reg_offset,
- amount_copied = 0);
+ /* Copy it out. */
+ for (regno = reg_offset, amount_copied = 0;
amount_copied < amount_to_copy;
- amount_copied += reg_size, regno++)
+ amount_copied += REGISTER_RAW_SIZE (regno), regno++)
{
enum lval_type lval;
CORE_ADDR addr;
int optim;
-
+ int realnum;
+
/* Just find out where to put it. */
- get_saved_register ((char *) NULL,
- &optim, &addr, frame, regno, &lval);
-
+ frame_register (frame, regno, &optim, &lval, &addr, &realnum,
+ NULL);
+
if (optim)
error ("Attempt to assign to a value that was optimized out.");
if (lval == lval_memory)
- write_memory (addr, buffer + amount_copied, reg_size);
+ write_memory (addr, buffer + amount_copied,
+ REGISTER_RAW_SIZE (regno));
else if (lval == lval_register)
- write_register_bytes (addr, buffer + amount_copied, reg_size);
+ regcache_cooked_write (current_regcache, realnum,
+ (buffer + amount_copied));
else
error ("Attempt to assign to an unmodifiable value.");
}
if (register_changed_hook)
register_changed_hook (-1);
target_changed_event ();
+
+ /* Assigning to the stack pointer, frame pointer, and other
+ (architecture and calling convention specific) registers
+ may cause the frame cache to be out of date. We just do
+ this on all assignments to registers for simplicity; I
+ doubt the slowdown matters. */
+ reinit_frame_cache ();
+
+ /* Having destoroyed the frame cache, restore the selected
+ frame. */
+ /* FIXME: cagney/2002-11-02: There has to be a better way of
+ doing this. Instead of constantly saving/restoring the
+ frame. Why not create a get_selected_frame() function
+ that, having saved the selected frame's ID can
+ automatically re-find the previously selected frame
+ automatically. */
+ {
+ struct frame_info *fi = frame_find_by_id (old_frame);
+ if (fi != NULL)
+ select_frame (fi);
+ }
}
break;
-
-
+
+
default:
error ("Left operand of assignment is not an lvalue.");
}
projects / thirdparty / binutils-gdb.git / commitdiff
