--- /dev/null
+%YAML 1.1
+---
+
+# Suricata configuration file. In addition to the comments describing all
+# options in this file, full documentation can be found at:
+# https://redmine.openinfosecfoundation.org/projects/suricata/wiki/Suricatayaml
+
+##
+## Step 1: inform Suricata about your network
+##
+
+vars:
+ # more specifc is better for alert accuracy and performance
+ address-groups:
+ HOME_NET: "[192.168.0.0/16,10.0.0.0/8,172.16.0.0/12]"
+ #HOME_NET: "[192.168.0.0/16]"
+ #HOME_NET: "[10.0.0.0/8]"
+ #HOME_NET: "[172.16.0.0/12]"
+ #HOME_NET: "any"
+
+ EXTERNAL_NET: "!$HOME_NET"
+ #EXTERNAL_NET: "any"
+
+ HTTP_SERVERS: "$HOME_NET"
+ SMTP_SERVERS: "$HOME_NET"
+ SQL_SERVERS: "$HOME_NET"
+ DNS_SERVERS: "$HOME_NET"
+ TELNET_SERVERS: "$HOME_NET"
+ AIM_SERVERS: "$EXTERNAL_NET"
+ DNP3_SERVER: "$HOME_NET"
+ DNP3_CLIENT: "$HOME_NET"
+ MODBUS_CLIENT: "$HOME_NET"
+ MODBUS_SERVER: "$HOME_NET"
+ ENIP_CLIENT: "$HOME_NET"
+ ENIP_SERVER: "$HOME_NET"
+
+ port-groups:
+ HTTP_PORTS: "80"
+ SHELLCODE_PORTS: "!80"
+ ORACLE_PORTS: 1521
+ SSH_PORTS: 22
+ DNP3_PORTS: 20000
+ MODBUS_PORTS: 502
+ FILE_DATA_PORTS: "[$HTTP_PORTS,110,143]"
+ FTP_PORTS: 21
+
+
+##
+## Step 2: select the rules to enable or disable
+##
+
+default-rule-path: /etc/suricata/rules
+rule-files: !include /var/ipfire/suricata/suricata-used-rulefiles.yaml
+
+classification-file: /etc/suricata/classification.config
+reference-config-file: /etc/suricata/reference.config
+# threshold-file: /etc/suricata/threshold.config
+
+
+##
+## Step 3: select outputs to enable
+##
+
+# The default logging directory. Any log or output file will be
+# placed here if its not specified with a full path name. This can be
+# overridden with the -l command line parameter.
+default-log-dir: /var/log/suricata/
+
+# global stats configuration
+stats:
+ enabled: yes
+ # The interval field (in seconds) controls at what interval
+ # the loggers are invoked.
+ interval: 8
+
+# Configure the type of alert (and other) logging you would like.
+outputs:
+ # a line based alerts log similar to Snort's fast.log
+ - fast:
+ enabled: yes
+ filename: fast.log
+ append: yes
+ #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
+
+ # Extensible Event Format (nicknamed EVE) event log in JSON format
+ - eve-log:
+ enabled: yes
+ filetype: regular #regular|syslog|unix_dgram|unix_stream|redis
+ filename: eve.json
+ #prefix: "@cee: " # prefix to prepend to each log entry
+ # the following are valid when type: syslog above
+ #identity: "suricata"
+ #facility: local5
+ #level: Info ## possible levels: Emergency, Alert, Critical,
+ ## Error, Warning, Notice, Info, Debug
+ #redis:
+ # server: 127.0.0.1
+ # port: 6379
+ # async: true ## if redis replies are read asynchronously
+ # mode: list ## possible values: list|lpush (default), rpush, channel|publish
+ # ## lpush and rpush are using a Redis list. "list" is an alias for lpush
+ # ## publish is using a Redis channel. "channel" is an alias for publish
+ # key: suricata ## key or channel to use (default to suricata)
+ # Redis pipelining set up. This will enable to only do a query every
+ # 'batch-size' events. This should lower the latency induced by network
+ # connection at the cost of some memory. There is no flushing implemented
+ # so this setting as to be reserved to high traffic suricata.
+ # pipelining:
+ # enabled: yes ## set enable to yes to enable query pipelining
+ # batch-size: 10 ## number of entry to keep in buffer
+ types:
+ - alert:
+ # payload: yes # enable dumping payload in Base64
+ # payload-buffer-size: 4kb # max size of payload buffer to output in eve-log
+ # payload-printable: yes # enable dumping payload in printable (lossy) format
+ # packet: yes # enable dumping of packet (without stream segments)
+ # http-body: yes # enable dumping of http body in Base64
+ # http-body-printable: yes # enable dumping of http body in printable format
+ metadata: yes # add L7/applayer fields, flowbit and other vars to the alert
+
+ # Enable the logging of tagged packets for rules using the
+ # "tag" keyword.
+ tagged-packets: yes
+
+ # HTTP X-Forwarded-For support by adding an extra field or overwriting
+ # the source or destination IP address (depending on flow direction)
+ # with the one reported in the X-Forwarded-For HTTP header. This is
+ # helpful when reviewing alerts for traffic that is being reverse
+ # or forward proxied.
+ xff:
+ enabled: no
+ # Two operation modes are available, "extra-data" and "overwrite".
+ mode: extra-data
+ # Two proxy deployments are supported, "reverse" and "forward". In
+ # a "reverse" deployment the IP address used is the last one, in a
+ # "forward" deployment the first IP address is used.
+ deployment: reverse
+ # Header name where the actual IP address will be reported, if more
+ # than one IP address is present, the last IP address will be the
+ # one taken into consideration.
+ header: X-Forwarded-For
+ - http:
+ extended: yes # enable this for extended logging information
+ # custom allows additional http fields to be included in eve-log
+ # the example below adds three additional fields when uncommented
+ #custom: [Accept-Encoding, Accept-Language, Authorization]
+ - dns:
+ # control logging of queries and answers
+ # default yes, no to disable
+ query: yes # enable logging of DNS queries
+ answer: yes # enable logging of DNS answers
+ # control which RR types are logged
+ # all enabled if custom not specified
+ #custom: [a, aaaa, cname, mx, ns, ptr, txt]
+ - tls:
+ extended: yes # enable this for extended logging information
+ # output TLS transaction where the session is resumed using a
+ # session id
+ #session-resumption: no
+ # custom allows to control which tls fields that are included
+ # in eve-log
+ #custom: [subject, issuer, session_resumed, serial, fingerprint, sni, version, not_before, not_after, certificate, chain]
+ - files:
+ force-magic: no # force logging magic on all logged files
+ # force logging of checksums, available hash functions are md5,
+ # sha1 and sha256
+ #force-hash: [md5]
+ #- drop:
+ # alerts: yes # log alerts that caused drops
+ # flows: all # start or all: 'start' logs only a single drop
+ # # per flow direction. All logs each dropped pkt.
+ - smtp:
+ #extended: yes # enable this for extended logging information
+ # this includes: bcc, message-id, subject, x_mailer, user-agent
+ # custom fields logging from the list:
+ # reply-to, bcc, message-id, subject, x-mailer, user-agent, received,
+ # x-originating-ip, in-reply-to, references, importance, priority,
+ # sensitivity, organization, content-md5, date
+ #custom: [received, x-mailer, x-originating-ip, relays, reply-to, bcc]
+ # output md5 of fields: body, subject
+ # for the body you need to set app-layer.protocols.smtp.mime.body-md5
+ # to yes
+ #md5: [body, subject]
+
+ #- dnp3
+ #- nfs
+ - ssh
+ - stats:
+ totals: yes # stats for all threads merged together
+ threads: no # per thread stats
+ deltas: no # include delta values
+ # bi-directional flows
+ - flow
+ # uni-directional flows
+ #- netflow
+ # Vars log flowbits and other packet and flow vars
+ #- vars
+
+ # alert output for use with Barnyard2
+ - unified2-alert:
+ enabled: no
+ filename: unified2.alert
+
+ # File size limit. Can be specified in kb, mb, gb. Just a number
+ # is parsed as bytes.
+ #limit: 32mb
+
+ # By default unified2 log files have the file creation time (in
+ # unix epoch format) appended to the filename. Set this to yes to
+ # disable this behaviour.
+ #nostamp: no
+
+ # Sensor ID field of unified2 alerts.
+ #sensor-id: 0
+
+ # Include payload of packets related to alerts. Defaults to true, set to
+ # false if payload is not required.
+ #payload: yes
+
+ # HTTP X-Forwarded-For support by adding the unified2 extra header or
+ # overwriting the source or destination IP address (depending on flow
+ # direction) with the one reported in the X-Forwarded-For HTTP header.
+ # This is helpful when reviewing alerts for traffic that is being reverse
+ # or forward proxied.
+ xff:
+ enabled: no
+ # Two operation modes are available, "extra-data" and "overwrite". Note
+ # that in the "overwrite" mode, if the reported IP address in the HTTP
+ # X-Forwarded-For header is of a different version of the packet
+ # received, it will fall-back to "extra-data" mode.
+ mode: extra-data
+ # Two proxy deployments are supported, "reverse" and "forward". In
+ # a "reverse" deployment the IP address used is the last one, in a
+ # "forward" deployment the first IP address is used.
+ deployment: reverse
+ # Header name where the actual IP address will be reported, if more
+ # than one IP address is present, the last IP address will be the
+ # one taken into consideration.
+ header: X-Forwarded-For
+
+ # a line based log of HTTP requests (no alerts)
+ - http-log:
+ enabled: no
+ filename: http.log
+ append: yes
+ #extended: yes # enable this for extended logging information
+ #custom: yes # enabled the custom logging format (defined by customformat)
+ #customformat: "%{%D-%H:%M:%S}t.%z %{X-Forwarded-For}i %H %m %h %u %s %B %a:%p -> %A:%P"
+ #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
+
+ # a line based log of TLS handshake parameters (no alerts)
+ - tls-log:
+ enabled: no # Log TLS connections.
+ filename: tls.log # File to store TLS logs.
+ append: yes
+ #extended: yes # Log extended information like fingerprint
+ #custom: yes # enabled the custom logging format (defined by customformat)
+ #customformat: "%{%D-%H:%M:%S}t.%z %a:%p -> %A:%P %v %n %d %D"
+ #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
+ # output TLS transaction where the session is resumed using a
+ # session id
+ #session-resumption: no
+
+ # output module to store certificates chain to disk
+ - tls-store:
+ enabled: no
+ #certs-log-dir: certs # directory to store the certificates files
+
+ # a line based log of DNS requests and/or replies (no alerts)
+ - dns-log:
+ enabled: no
+ filename: dns.log
+ append: yes
+ #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
+
+ # Packet log... log packets in pcap format. 3 modes of operation: "normal"
+ # "multi" and "sguil".
+ #
+ # In normal mode a pcap file "filename" is created in the default-log-dir,
+ # or are as specified by "dir".
+ # In multi mode, a file is created per thread. This will perform much
+ # better, but will create multiple files where 'normal' would create one.
+ # In multi mode the filename takes a few special variables:
+ # - %n -- thread number
+ # - %i -- thread id
+ # - %t -- timestamp (secs or secs.usecs based on 'ts-format'
+ # E.g. filename: pcap.%n.%t
+ #
+ # Note that it's possible to use directories, but the directories are not
+ # created by Suricata. E.g. filename: pcaps/%n/log.%s will log into the
+ # per thread directory.
+ #
+ # Also note that the limit and max-files settings are enforced per thread.
+ # So the size limit when using 8 threads with 1000mb files and 2000 files
+ # is: 8*1000*2000 ~ 16TiB.
+ #
+ # In Sguil mode "dir" indicates the base directory. In this base dir the
+ # pcaps are created in th directory structure Sguil expects:
+ #
+ # $sguil-base-dir/YYYY-MM-DD/$filename.<timestamp>
+ #
+ # By default all packets are logged except:
+ # - TCP streams beyond stream.reassembly.depth
+ # - encrypted streams after the key exchange
+ #
+ - pcap-log:
+ enabled: no
+ filename: log.pcap
+
+ # File size limit. Can be specified in kb, mb, gb. Just a number
+ # is parsed as bytes.
+ limit: 1000mb
+
+ # If set to a value will enable ring buffer mode. Will keep Maximum of "max-files" of size "limit"
+ max-files: 2000
+
+ mode: normal # normal, multi or sguil.
+
+ # Directory to place pcap files. If not provided the default log
+ # directory will be used. Required for "sguil" mode.
+ #dir: /nsm_data/
+
+ #ts-format: usec # sec or usec second format (default) is filename.sec usec is filename.sec.usec
+ use-stream-depth: no #If set to "yes" packets seen after reaching stream inspection depth are ignored. "no" logs all packets
+ honor-pass-rules: no # If set to "yes", flows in which a pass rule matched will stopped being logged.
+
+ # a full alerts log containing much information for signature writers
+ # or for investigating suspected false positives.
+ - alert-debug:
+ enabled: no
+ filename: alert-debug.log
+ append: yes
+ #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
+
+ # alert output to prelude (http://www.prelude-technologies.com/) only
+ # available if Suricata has been compiled with --enable-prelude
+ - alert-prelude:
+ enabled: no
+ profile: suricata
+ log-packet-content: no
+ log-packet-header: yes
+
+ # Stats.log contains data from various counters of the suricata engine.
+ - stats:
+ enabled: yes
+ filename: stats.log
+ append: yes # append to file (yes) or overwrite it (no)
+ totals: yes # stats for all threads merged together
+ threads: no # per thread stats
+ #null-values: yes # print counters that have value 0
+
+ # a line based alerts log similar to fast.log into syslog
+ - syslog:
+ enabled: no
+ # reported identity to syslog. If ommited the program name (usually
+ # suricata) will be used.
+ #identity: "suricata"
+ facility: local5
+ #level: Info ## possible levels: Emergency, Alert, Critical,
+ ## Error, Warning, Notice, Info, Debug
+
+ # a line based information for dropped packets in IPS mode
+ - drop:
+ enabled: no
+ filename: drop.log
+ append: yes
+ #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
+
+ # output module to store extracted files to disk
+ #
+ # The files are stored to the log-dir in a format "file.<id>" where <id> is
+ # an incrementing number starting at 1. For each file "file.<id>" a meta
+ # file "file.<id>.meta" is created.
+ #
+ # File extraction depends on a lot of things to be fully done:
+ # - file-store stream-depth. For optimal results, set this to 0 (unlimited)
+ # - http request / response body sizes. Again set to 0 for optimal results.
+ # - rules that contain the "filestore" keyword.
+ - file-store:
+ enabled: no # set to yes to enable
+ log-dir: files # directory to store the files
+ force-magic: no # force logging magic on all stored files
+ # force logging of checksums, available hash functions are md5,
+ # sha1 and sha256
+ #force-hash: [md5]
+ force-filestore: no # force storing of all files
+ # override global stream-depth for sessions in which we want to
+ # perform file extraction. Set to 0 for unlimited.
+ #stream-depth: 0
+ #waldo: file.waldo # waldo file to store the file_id across runs
+ # uncomment to disable meta file writing
+ #write-meta: no
+ # uncomment the following variable to define how many files can
+ # remain open for filestore by Suricata. Default value is 0 which
+ # means files get closed after each write
+ #max-open-files: 1000
+
+ # output module to log files tracked in a easily parsable json format
+ - file-log:
+ enabled: no
+ filename: files-json.log
+ append: yes
+ #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
+
+ force-magic: no # force logging magic on all logged files
+ # force logging of checksums, available hash functions are md5,
+ # sha1 and sha256
+ #force-hash: [md5]
+
+ # Log TCP data after stream normalization
+ # 2 types: file or dir. File logs into a single logfile. Dir creates
+ # 2 files per TCP session and stores the raw TCP data into them.
+ # Using 'both' will enable both file and dir modes.
+ #
+ # Note: limited by stream.depth
+ - tcp-data:
+ enabled: no
+ type: file
+ filename: tcp-data.log
+
+ # Log HTTP body data after normalization, dechunking and unzipping.
+ # 2 types: file or dir. File logs into a single logfile. Dir creates
+ # 2 files per HTTP session and stores the normalized data into them.
+ # Using 'both' will enable both file and dir modes.
+ #
+ # Note: limited by the body limit settings
+ - http-body-data:
+ enabled: no
+ type: file
+ filename: http-data.log
+
+ # Lua Output Support - execute lua script to generate alert and event
+ # output.
+ # Documented at:
+ # https://redmine.openinfosecfoundation.org/projects/suricata/wiki/Lua_Output
+ - lua:
+ enabled: no
+ #scripts-dir: /etc/suricata/lua-output/
+ scripts:
+ # - script1.lua
+
+# Logging configuration. This is not about logging IDS alerts/events, but
+# output about what Suricata is doing, like startup messages, errors, etc.
+logging:
+ # The default log level, can be overridden in an output section.
+ # Note that debug level logging will only be emitted if Suricata was
+ # compiled with the --enable-debug configure option.
+ #
+ # This value is overriden by the SC_LOG_LEVEL env var.
+ default-log-level: notice
+
+ # The default output format. Optional parameter, should default to
+ # something reasonable if not provided. Can be overriden in an
+ # output section. You can leave this out to get the default.
+ #
+ # This value is overriden by the SC_LOG_FORMAT env var.
+ #default-log-format: "[%i] %t - (%f:%l) <%d> (%n) -- "
+
+ # A regex to filter output. Can be overridden in an output section.
+ # Defaults to empty (no filter).
+ #
+ # This value is overriden by the SC_LOG_OP_FILTER env var.
+ default-output-filter:
+
+ # Define your logging outputs. If none are defined, or they are all
+ # disabled you will get the default - console output.
+ outputs:
+ - console:
+ enabled: yes
+ # type: json
+ - file:
+ enabled: yes
+ level: info
+ filename: /var/log/suricata/suricata.log
+ # type: json
+ - syslog:
+ enabled: no
+ facility: local5
+ format: "[%i] <%d> -- "
+ # type: json
+
+
+##
+## Step 4: configure common capture settings
+##
+## See "Advanced Capture Options" below for more options, including NETMAP
+## and PF_RING.
+##
+
+# Linux high speed capture support
+af-packet:
+ - interface: eth0
+ # Number of receive threads. "auto" uses the number of cores
+ #threads: auto
+ # Default clusterid. AF_PACKET will load balance packets based on flow.
+ cluster-id: 99
+ # Default AF_PACKET cluster type. AF_PACKET can load balance per flow or per hash.
+ # This is only supported for Linux kernel > 3.1
+ # possible value are:
+ # * cluster_round_robin: round robin load balancing
+ # * cluster_flow: all packets of a given flow are send to the same socket
+ # * cluster_cpu: all packets treated in kernel by a CPU are send to the same socket
+ # * cluster_qm: all packets linked by network card to a RSS queue are sent to the same
+ # socket. Requires at least Linux 3.14.
+ # * cluster_random: packets are sent randomly to sockets but with an equipartition.
+ # Requires at least Linux 3.14.
+ # * cluster_rollover: kernel rotates between sockets filling each socket before moving
+ # to the next. Requires at least Linux 3.10.
+ # Recommended modes are cluster_flow on most boxes and cluster_cpu or cluster_qm on system
+ # with capture card using RSS (require cpu affinity tuning and system irq tuning)
+ cluster-type: cluster_flow
+ # In some fragmentation case, the hash can not be computed. If "defrag" is set
+ # to yes, the kernel will do the needed defragmentation before sending the packets.
+ defrag: yes
+ # After Linux kernel 3.10 it is possible to activate the rollover option: if a socket is
+ # full then kernel will send the packet on the next socket with room available. This option
+ # can minimize packet drop and increase the treated bandwidth on single intensive flow.
+ #rollover: yes
+ # To use the ring feature of AF_PACKET, set 'use-mmap' to yes
+ #use-mmap: yes
+ # Lock memory map to avoid it goes to swap. Be careful that over suscribing could lock
+ # your system
+ #mmap-locked: yes
+ # Use tpacket_v3 capture mode, only active if use-mmap is true
+ # Don't use it in IPS or TAP mode as it causes severe latency
+ #tpacket-v3: yes
+ # Ring size will be computed with respect to max_pending_packets and number
+ # of threads. You can set manually the ring size in number of packets by setting
+ # the following value. If you are using flow cluster-type and have really network
+ # intensive single-flow you could want to set the ring-size independently of the number
+ # of threads:
+ #ring-size: 2048
+ # Block size is used by tpacket_v3 only. It should set to a value high enough to contain
+ # a decent number of packets. Size is in bytes so please consider your MTU. It should be
+ # a power of 2 and it must be multiple of page size (usually 4096).
+ #block-size: 32768
+ # tpacket_v3 block timeout: an open block is passed to userspace if it is not
+ # filled after block-timeout milliseconds.
+ #block-timeout: 10
+ # On busy system, this could help to set it to yes to recover from a packet drop
+ # phase. This will result in some packets (at max a ring flush) being non treated.
+ #use-emergency-flush: yes
+ # recv buffer size, increase value could improve performance
+ # buffer-size: 32768
+ # Set to yes to disable promiscuous mode
+ # disable-promisc: no
+ # Choose checksum verification mode for the interface. At the moment
+ # of the capture, some packets may be with an invalid checksum due to
+ # offloading to the network card of the checksum computation.
+ # Possible values are:
+ # - kernel: use indication sent by kernel for each packet (default)
+ # - yes: checksum validation is forced
+ # - no: checksum validation is disabled
+ # - auto: suricata uses a statistical approach to detect when
+ # checksum off-loading is used.
+ # Warning: 'checksum-validation' must be set to yes to have any validation
+ #checksum-checks: kernel
+ # BPF filter to apply to this interface. The pcap filter syntax apply here.
+ #bpf-filter: port 80 or udp
+ # You can use the following variables to activate AF_PACKET tap or IPS mode.
+ # If copy-mode is set to ips or tap, the traffic coming to the current
+ # interface will be copied to the copy-iface interface. If 'tap' is set, the
+ # copy is complete. If 'ips' is set, the packet matching a 'drop' action
+ # will not be copied.
+ #copy-mode: ips
+ #copy-iface: eth1
+
+ # Put default values here. These will be used for an interface that is not
+ # in the list above.
+ - interface: default
+ #threads: auto
+ #use-mmap: no
+ #rollover: yes
+ #tpacket-v3: yes
+
+# Cross platform libpcap capture support
+pcap:
+ - interface: eth0
+ # On Linux, pcap will try to use mmaped capture and will use buffer-size
+ # as total of memory used by the ring. So set this to something bigger
+ # than 1% of your bandwidth.
+ #buffer-size: 16777216
+ #bpf-filter: "tcp and port 25"
+ # Choose checksum verification mode for the interface. At the moment
+ # of the capture, some packets may be with an invalid checksum due to
+ # offloading to the network card of the checksum computation.
+ # Possible values are:
+ # - yes: checksum validation is forced
+ # - no: checksum validation is disabled
+ # - auto: suricata uses a statistical approach to detect when
+ # checksum off-loading is used. (default)
+ # Warning: 'checksum-validation' must be set to yes to have any validation
+ #checksum-checks: auto
+ # With some accelerator cards using a modified libpcap (like myricom), you
+ # may want to have the same number of capture threads as the number of capture
+ # rings. In this case, set up the threads variable to N to start N threads
+ # listening on the same interface.
+ #threads: 16
+ # set to no to disable promiscuous mode:
+ #promisc: no
+ # set snaplen, if not set it defaults to MTU if MTU can be known
+ # via ioctl call and to full capture if not.
+ #snaplen: 1518
+ # Put default values here
+ - interface: default
+ #checksum-checks: auto
+
+# Settings for reading pcap files
+pcap-file:
+ # Possible values are:
+ # - yes: checksum validation is forced
+ # - no: checksum validation is disabled
+ # - auto: suricata uses a statistical approach to detect when
+ # checksum off-loading is used. (default)
+ # Warning: 'checksum-validation' must be set to yes to have checksum tested
+ checksum-checks: auto
+
+# See "Advanced Capture Options" below for more options, including NETMAP
+# and PF_RING.
+
+
+##
+## Step 5: App Layer Protocol Configuration
+##
+
+# Configure the app-layer parsers. The protocols section details each
+# protocol.
+#
+# The option "enabled" takes 3 values - "yes", "no", "detection-only".
+# "yes" enables both detection and the parser, "no" disables both, and
+# "detection-only" enables protocol detection only (parser disabled).
+app-layer:
+ protocols:
+ tls:
+ enabled: yes
+ detection-ports:
+ dp: 443
+
+ # Completely stop processing TLS/SSL session after the handshake
+ # completed. If bypass is enabled this will also trigger flow
+ # bypass. If disabled (the default), TLS/SSL session is still
+ # tracked for Heartbleed and other anomalies.
+ #no-reassemble: yes
+ dcerpc:
+ enabled: yes
+ ftp:
+ enabled: yes
+ ssh:
+ enabled: yes
+ smtp:
+ enabled: yes
+ # Configure SMTP-MIME Decoder
+ mime:
+ # Decode MIME messages from SMTP transactions
+ # (may be resource intensive)
+ # This field supercedes all others because it turns the entire
+ # process on or off
+ decode-mime: yes
+
+ # Decode MIME entity bodies (ie. base64, quoted-printable, etc.)
+ decode-base64: yes
+ decode-quoted-printable: yes
+
+ # Maximum bytes per header data value stored in the data structure
+ # (default is 2000)
+ header-value-depth: 2000
+
+ # Extract URLs and save in state data structure
+ extract-urls: yes
+ # Set to yes to compute the md5 of the mail body. You will then
+ # be able to journalize it.
+ body-md5: no
+ # Configure inspected-tracker for file_data keyword
+ inspected-tracker:
+ content-limit: 100000
+ content-inspect-min-size: 32768
+ content-inspect-window: 4096
+ imap:
+ enabled: detection-only
+ msn:
+ enabled: detection-only
+ smb:
+ enabled: yes
+ detection-ports:
+ dp: 139, 445
+ # smb2 detection is disabled internally inside the engine.
+ #smb2:
+ # enabled: yes
+ # Note: NFS parser depends on Rust support: pass --enable-rust
+ # to configure.
+ nfs:
+ enabled: no
+ dns:
+ # memcaps. Globally and per flow/state.
+ #global-memcap: 16mb
+ #state-memcap: 512kb
+
+ # How many unreplied DNS requests are considered a flood.
+ # If the limit is reached, app-layer-event:dns.flooded; will match.
+ #request-flood: 500
+
+ tcp:
+ enabled: yes
+ detection-ports:
+ dp: 53
+ udp:
+ enabled: yes
+ detection-ports:
+ dp: 53
+ http:
+ enabled: yes
+ # memcap: 64mb
+
+ # default-config: Used when no server-config matches
+ # personality: List of personalities used by default
+ # request-body-limit: Limit reassembly of request body for inspection
+ # by http_client_body & pcre /P option.
+ # response-body-limit: Limit reassembly of response body for inspection
+ # by file_data, http_server_body & pcre /Q option.
+ # double-decode-path: Double decode path section of the URI
+ # double-decode-query: Double decode query section of the URI
+ # response-body-decompress-layer-limit:
+ # Limit to how many layers of compression will be
+ # decompressed. Defaults to 2.
+ #
+ # server-config: List of server configurations to use if address matches
+ # address: List of ip addresses or networks for this block
+ # personalitiy: List of personalities used by this block
+ # request-body-limit: Limit reassembly of request body for inspection
+ # by http_client_body & pcre /P option.
+ # response-body-limit: Limit reassembly of response body for inspection
+ # by file_data, http_server_body & pcre /Q option.
+ # double-decode-path: Double decode path section of the URI
+ # double-decode-query: Double decode query section of the URI
+ #
+ # uri-include-all: Include all parts of the URI. By default the
+ # 'scheme', username/password, hostname and port
+ # are excluded. Setting this option to true adds
+ # all of them to the normalized uri as inspected
+ # by http_uri, urilen, pcre with /U and the other
+ # keywords that inspect the normalized uri.
+ # Note that this does not affect http_raw_uri.
+ # Also, note that including all was the default in
+ # 1.4 and 2.0beta1.
+ #
+ # meta-field-limit: Hard size limit for request and response size
+ # limits. Applies to request line and headers,
+ # response line and headers. Does not apply to
+ # request or response bodies. Default is 18k.
+ # If this limit is reached an event is raised.
+ #
+ # Currently Available Personalities:
+ # Minimal, Generic, IDS (default), IIS_4_0, IIS_5_0, IIS_5_1, IIS_6_0,
+ # IIS_7_0, IIS_7_5, Apache_2
+ libhtp:
+ default-config:
+ personality: IDS
+
+ # Can be specified in kb, mb, gb. Just a number indicates
+ # it's in bytes.
+ request-body-limit: 100kb
+ response-body-limit: 100kb
+
+ # inspection limits
+ request-body-minimal-inspect-size: 32kb
+ request-body-inspect-window: 4kb
+ response-body-minimal-inspect-size: 40kb
+ response-body-inspect-window: 16kb
+
+ # response body decompression (0 disables)
+ response-body-decompress-layer-limit: 2
+
+ # auto will use http-body-inline mode in IPS mode, yes or no set it statically
+ http-body-inline: auto
+
+ # Take a random value for inspection sizes around the specified value.
+ # This lower the risk of some evasion technics but could lead
+ # detection change between runs. It is set to 'yes' by default.
+ #randomize-inspection-sizes: yes
+ # If randomize-inspection-sizes is active, the value of various
+ # inspection size will be choosen in the [1 - range%, 1 + range%]
+ # range
+ # Default value of randomize-inspection-range is 10.
+ #randomize-inspection-range: 10
+
+ # decoding
+ double-decode-path: no
+ double-decode-query: no
+
+ server-config:
+
+ #- apache:
+ # address: [192.168.1.0/24, 127.0.0.0/8, "::1"]
+ # personality: Apache_2
+ # # Can be specified in kb, mb, gb. Just a number indicates
+ # # it's in bytes.
+ # request-body-limit: 4096
+ # response-body-limit: 4096
+ # double-decode-path: no
+ # double-decode-query: no
+
+ #- iis7:
+ # address:
+ # - 192.168.0.0/24
+ # - 192.168.10.0/24
+ # personality: IIS_7_0
+ # # Can be specified in kb, mb, gb. Just a number indicates
+ # # it's in bytes.
+ # request-body-limit: 4096
+ # response-body-limit: 4096
+ # double-decode-path: no
+ # double-decode-query: no
+
+ # Note: Modbus probe parser is minimalist due to the poor significant field
+ # Only Modbus message length (greater than Modbus header length)
+ # And Protocol ID (equal to 0) are checked in probing parser
+ # It is important to enable detection port and define Modbus port
+ # to avoid false positive
+ modbus:
+ # How many unreplied Modbus requests are considered a flood.
+ # If the limit is reached, app-layer-event:modbus.flooded; will match.
+ #request-flood: 500
+
+ enabled: no
+ detection-ports:
+ dp: 502
+ # According to MODBUS Messaging on TCP/IP Implementation Guide V1.0b, it
+ # is recommended to keep the TCP connection opened with a remote device
+ # and not to open and close it for each MODBUS/TCP transaction. In that
+ # case, it is important to set the depth of the stream reassembling as
+ # unlimited (stream.reassembly.depth: 0)
+
+ # Stream reassembly size for modbus. By default track it completely.
+ stream-depth: 0
+
+ # DNP3
+ dnp3:
+ enabled: no
+ detection-ports:
+ dp: 20000
+
+ # SCADA EtherNet/IP and CIP protocol support
+ enip:
+ enabled: no
+ detection-ports:
+ dp: 44818
+ sp: 44818
+
+ # Note: parser depends on experimental Rust support
+ # with --enable-rust-experimental passed to configure
+ ntp:
+ enabled: no
+
+# Limit for the maximum number of asn1 frames to decode (default 256)
+asn1-max-frames: 256
+
+
+##############################################################################
+##
+## Advanced settings below
+##
+##############################################################################
+
+##
+## Run Options
+##
+
+# Run suricata as user and group.
+#run-as:
+# user: suri
+# group: suri
+
+# Some logging module will use that name in event as identifier. The default
+# value is the hostname
+#sensor-name: suricata
+
+# Default location of the pid file. The pid file is only used in
+# daemon mode (start Suricata with -D). If not running in daemon mode
+# the --pidfile command line option must be used to create a pid file.
+#pid-file: /var/run/suricata.pid
+
+# Daemon working directory
+# Suricata will change directory to this one if provided
+# Default: "/"
+#daemon-directory: "/"
+
+# Suricata core dump configuration. Limits the size of the core dump file to
+# approximately max-dump. The actual core dump size will be a multiple of the
+# page size. Core dumps that would be larger than max-dump are truncated. On
+# Linux, the actual core dump size may be a few pages larger than max-dump.
+# Setting max-dump to 0 disables core dumping.
+# Setting max-dump to 'unlimited' will give the full core dump file.
+# On 32-bit Linux, a max-dump value >= ULONG_MAX may cause the core dump size
+# to be 'unlimited'.
+
+coredump:
+ max-dump: unlimited
+
+# If suricata box is a router for the sniffed networks, set it to 'router'. If
+# it is a pure sniffing setup, set it to 'sniffer-only'.
+# If set to auto, the variable is internally switch to 'router' in IPS mode
+# and 'sniffer-only' in IDS mode.
+# This feature is currently only used by the reject* keywords.
+host-mode: auto
+
+# Number of packets preallocated per thread. The default is 1024. A higher number
+# will make sure each CPU will be more easily kept busy, but may negatively
+# impact caching.
+#
+# If you are using the CUDA pattern matcher (mpm-algo: ac-cuda), different rules
+# apply. In that case try something like 60000 or more. This is because the CUDA
+# pattern matcher buffers and scans as many packets as possible in parallel.
+#max-pending-packets: 1024
+
+# Runmode the engine should use. Please check --list-runmodes to get the available
+# runmodes for each packet acquisition method. Defaults to "autofp" (auto flow pinned
+# load balancing).
+#runmode: autofp
+
+# Specifies the kind of flow load balancer used by the flow pinned autofp mode.
+#
+# Supported schedulers are:
+#
+# round-robin - Flows assigned to threads in a round robin fashion.
+# active-packets - Flows assigned to threads that have the lowest number of
+# unprocessed packets (default).
+# hash - Flow alloted usihng the address hash. More of a random
+# technique. Was the default in Suricata 1.2.1 and older.
+#
+#autofp-scheduler: active-packets
+
+# Preallocated size for packet. Default is 1514 which is the classical
+# size for pcap on ethernet. You should adjust this value to the highest
+# packet size (MTU + hardware header) on your system.
+#default-packet-size: 1514
+
+# Unix command socket can be used to pass commands to suricata.
+# An external tool can then connect to get information from suricata
+# or trigger some modifications of the engine. Set enabled to yes
+# to activate the feature. In auto mode, the feature will only be
+# activated in live capture mode. You can use the filename variable to set
+# the file name of the socket.
+unix-command:
+ enabled: auto
+ #filename: custom.socket
+
+# Magic file. The extension .mgc is added to the value here.
+#magic-file: /usr/share/file/magic
+#magic-file:
+
+legacy:
+ uricontent: enabled
+
+##
+## Detection settings
+##
+
+# Set the order of alerts bassed on actions
+# The default order is pass, drop, reject, alert
+# action-order:
+# - pass
+# - drop
+# - reject
+# - alert
+
+# IP Reputation
+#reputation-categories-file: /etc/suricata/iprep/categories.txt
+#default-reputation-path: /etc/suricata/iprep
+#reputation-files:
+# - reputation.list
+
+# When run with the option --engine-analysis, the engine will read each of
+# the parameters below, and print reports for each of the enabled sections
+# and exit. The reports are printed to a file in the default log dir
+# given by the parameter "default-log-dir", with engine reporting
+# subsection below printing reports in its own report file.
+engine-analysis:
+ # enables printing reports for fast-pattern for every rule.
+ rules-fast-pattern: yes
+ # enables printing reports for each rule
+ rules: yes
+
+#recursion and match limits for PCRE where supported
+pcre:
+ match-limit: 3500
+ match-limit-recursion: 1500
+
+##
+## Advanced Traffic Tracking and Reconstruction Settings
+##
+
+# Host specific policies for defragmentation and TCP stream
+# reassembly. The host OS lookup is done using a radix tree, just
+# like a routing table so the most specific entry matches.
+host-os-policy:
+ # Make the default policy windows.
+ windows: [0.0.0.0/0]
+ bsd: []
+ bsd-right: []
+ old-linux: []
+ linux: []
+ old-solaris: []
+ solaris: []
+ hpux10: []
+ hpux11: []
+ irix: []
+ macos: []
+ vista: []
+ windows2k3: []
+
+# Defrag settings:
+
+defrag:
+ memcap: 32mb
+ hash-size: 65536
+ trackers: 65535 # number of defragmented flows to follow
+ max-frags: 65535 # number of fragments to keep (higher than trackers)
+ prealloc: yes
+ timeout: 60
+
+# Enable defrag per host settings
+# host-config:
+#
+# - dmz:
+# timeout: 30
+# address: [192.168.1.0/24, 127.0.0.0/8, 1.1.1.0/24, 2.2.2.0/24, "1.1.1.1", "2.2.2.2", "::1"]
+#
+# - lan:
+# timeout: 45
+# address:
+# - 192.168.0.0/24
+# - 192.168.10.0/24
+# - 172.16.14.0/24
+
+# Flow settings:
+# By default, the reserved memory (memcap) for flows is 32MB. This is the limit
+# for flow allocation inside the engine. You can change this value to allow
+# more memory usage for flows.
+# The hash-size determine the size of the hash used to identify flows inside
+# the engine, and by default the value is 65536.
+# At the startup, the engine can preallocate a number of flows, to get a better
+# performance. The number of flows preallocated is 10000 by default.
+# emergency-recovery is the percentage of flows that the engine need to
+# prune before unsetting the emergency state. The emergency state is activated
+# when the memcap limit is reached, allowing to create new flows, but
+# prunning them with the emergency timeouts (they are defined below).
+# If the memcap is reached, the engine will try to prune flows
+# with the default timeouts. If it doens't find a flow to prune, it will set
+# the emergency bit and it will try again with more agressive timeouts.
+# If that doesn't work, then it will try to kill the last time seen flows
+# not in use.
+# The memcap can be specified in kb, mb, gb. Just a number indicates it's
+# in bytes.
+
+flow:
+ memcap: 128mb
+ hash-size: 65536
+ prealloc: 10000
+ emergency-recovery: 30
+ #managers: 1 # default to one flow manager
+ #recyclers: 1 # default to one flow recycler thread
+
+# This option controls the use of vlan ids in the flow (and defrag)
+# hashing. Normally this should be enabled, but in some (broken)
+# setups where both sides of a flow are not tagged with the same vlan
+# tag, we can ignore the vlan id's in the flow hashing.
+vlan:
+ use-for-tracking: true
+
+# Specific timeouts for flows. Here you can specify the timeouts that the
+# active flows will wait to transit from the current state to another, on each
+# protocol. The value of "new" determine the seconds to wait after a hanshake or
+# stream startup before the engine free the data of that flow it doesn't
+# change the state to established (usually if we don't receive more packets
+# of that flow). The value of "established" is the amount of
+# seconds that the engine will wait to free the flow if it spend that amount
+# without receiving new packets or closing the connection. "closed" is the
+# amount of time to wait after a flow is closed (usually zero). "bypassed"
+# timeout controls locally bypassed flows. For these flows we don't do any other
+# tracking. If no packets have been seen after this timeout, the flow is discarded.
+#
+# There's an emergency mode that will become active under attack circumstances,
+# making the engine to check flow status faster. This configuration variables
+# use the prefix "emergency-" and work similar as the normal ones.
+# Some timeouts doesn't apply to all the protocols, like "closed", for udp and
+# icmp.
+
+flow-timeouts:
+
+ default:
+ new: 30
+ established: 300
+ closed: 0
+ bypassed: 100
+ emergency-new: 10
+ emergency-established: 100
+ emergency-closed: 0
+ emergency-bypassed: 50
+ tcp:
+ new: 60
+ established: 600
+ closed: 60
+ bypassed: 100
+ emergency-new: 5
+ emergency-established: 100
+ emergency-closed: 10
+ emergency-bypassed: 50
+ udp:
+ new: 30
+ established: 300
+ bypassed: 100
+ emergency-new: 10
+ emergency-established: 100
+ emergency-bypassed: 50
+ icmp:
+ new: 30
+ established: 300
+ bypassed: 100
+ emergency-new: 10
+ emergency-established: 100
+ emergency-bypassed: 50
+
+# Stream engine settings. Here the TCP stream tracking and reassembly
+# engine is configured.
+#
+# stream:
+# memcap: 32mb # Can be specified in kb, mb, gb. Just a
+# # number indicates it's in bytes.
+# checksum-validation: yes # To validate the checksum of received
+# # packet. If csum validation is specified as
+# # "yes", then packet with invalid csum will not
+# # be processed by the engine stream/app layer.
+# # Warning: locally generated trafic can be
+# # generated without checksum due to hardware offload
+# # of checksum. You can control the handling of checksum
+# # on a per-interface basis via the 'checksum-checks'
+# # option
+# prealloc-sessions: 2k # 2k sessions prealloc'd per stream thread
+# midstream: false # don't allow midstream session pickups
+# async-oneside: false # don't enable async stream handling
+# inline: no # stream inline mode
+# drop-invalid: yes # in inline mode, drop packets that are invalid with regards to streaming engine
+# max-synack-queued: 5 # Max different SYN/ACKs to queue
+# bypass: no # Bypass packets when stream.depth is reached
+#
+# reassembly:
+# memcap: 64mb # Can be specified in kb, mb, gb. Just a number
+# # indicates it's in bytes.
+# depth: 1mb # Can be specified in kb, mb, gb. Just a number
+# # indicates it's in bytes.
+# toserver-chunk-size: 2560 # inspect raw stream in chunks of at least
+# # this size. Can be specified in kb, mb,
+# # gb. Just a number indicates it's in bytes.
+# toclient-chunk-size: 2560 # inspect raw stream in chunks of at least
+# # this size. Can be specified in kb, mb,
+# # gb. Just a number indicates it's in bytes.
+# randomize-chunk-size: yes # Take a random value for chunk size around the specified value.
+# # This lower the risk of some evasion technics but could lead
+# # detection change between runs. It is set to 'yes' by default.
+# randomize-chunk-range: 10 # If randomize-chunk-size is active, the value of chunk-size is
+# # a random value between (1 - randomize-chunk-range/100)*toserver-chunk-size
+# # and (1 + randomize-chunk-range/100)*toserver-chunk-size and the same
+# # calculation for toclient-chunk-size.
+# # Default value of randomize-chunk-range is 10.
+#
+# raw: yes # 'Raw' reassembly enabled or disabled.
+# # raw is for content inspection by detection
+# # engine.
+#
+# segment-prealloc: 2048 # number of segments preallocated per thread
+#
+# check-overlap-different-data: true|false
+# # check if a segment contains different data
+# # than what we've already seen for that
+# # position in the stream.
+# # This is enabled automatically if inline mode
+# # is used or when stream-event:reassembly_overlap_different_data;
+# # is used in a rule.
+#
+stream:
+ memcap: 64mb
+ checksum-validation: yes # reject wrong csums
+ inline: auto # auto will use inline mode in IPS mode, yes or no set it statically
+ reassembly:
+ memcap: 256mb
+ depth: 1mb # reassemble 1mb into a stream
+ toserver-chunk-size: 2560
+ toclient-chunk-size: 2560
+ randomize-chunk-size: yes
+ #randomize-chunk-range: 10
+ #raw: yes
+ #segment-prealloc: 2048
+ #check-overlap-different-data: true
+
+# Host table:
+#
+# Host table is used by tagging and per host thresholding subsystems.
+#
+host:
+ hash-size: 4096
+ prealloc: 1000
+ memcap: 32mb
+
+# IP Pair table:
+#
+# Used by xbits 'ippair' tracking.
+#
+#ippair:
+# hash-size: 4096
+# prealloc: 1000
+# memcap: 32mb
+
+# Decoder settings
+
+decoder:
+ # Teredo decoder is known to not be completely accurate
+ # it will sometimes detect non-teredo as teredo.
+ teredo:
+ enabled: true
+
+
+##
+## Performance tuning and profiling
+##
+
+# The detection engine builds internal groups of signatures. The engine
+# allow us to specify the profile to use for them, to manage memory on an
+# efficient way keeping a good performance. For the profile keyword you
+# can use the words "low", "medium", "high" or "custom". If you use custom
+# make sure to define the values at "- custom-values" as your convenience.
+# Usually you would prefer medium/high/low.
+#
+# "sgh mpm-context", indicates how the staging should allot mpm contexts for
+# the signature groups. "single" indicates the use of a single context for
+# all the signature group heads. "full" indicates a mpm-context for each
+# group head. "auto" lets the engine decide the distribution of contexts
+# based on the information the engine gathers on the patterns from each
+# group head.
+#
+# The option inspection-recursion-limit is used to limit the recursive calls
+# in the content inspection code. For certain payload-sig combinations, we
+# might end up taking too much time in the content inspection code.
+# If the argument specified is 0, the engine uses an internally defined
+# default limit. On not specifying a value, we use no limits on the recursion.
+detect:
+ profile: medium
+ custom-values:
+ toclient-groups: 3
+ toserver-groups: 25
+ sgh-mpm-context: auto
+ inspection-recursion-limit: 3000
+ # If set to yes, the loading of signatures will be made after the capture
+ # is started. This will limit the downtime in IPS mode.
+ #delayed-detect: yes
+
+ prefilter:
+ # default prefiltering setting. "mpm" only creates MPM/fast_pattern
+ # engines. "auto" also sets up prefilter engines for other keywords.
+ # Use --list-keywords=all to see which keywords support prefiltering.
+ default: mpm
+
+ # the grouping values above control how many groups are created per
+ # direction. Port whitelisting forces that port to get it's own group.
+ # Very common ports will benefit, as well as ports with many expensive
+ # rules.
+ grouping:
+ #tcp-whitelist: 53, 80, 139, 443, 445, 1433, 3306, 3389, 6666, 6667, 8080
+ #udp-whitelist: 53, 135, 5060
+
+ profiling:
+ # Log the rules that made it past the prefilter stage, per packet
+ # default is off. The threshold setting determines how many rules
+ # must have made it past pre-filter for that rule to trigger the
+ # logging.
+ #inspect-logging-threshold: 200
+ grouping:
+ dump-to-disk: false
+ include-rules: false # very verbose
+ include-mpm-stats: false
+
+# Select the multi pattern algorithm you want to run for scan/search the
+# in the engine.
+#
+# The supported algorithms are:
+# "ac" - Aho-Corasick, default implementation
+# "ac-bs" - Aho-Corasick, reduced memory implementation
+# "ac-cuda" - Aho-Corasick, CUDA implementation
+# "ac-ks" - Aho-Corasick, "Ken Steele" variant
+# "hs" - Hyperscan, available when built with Hyperscan support
+#
+# The default mpm-algo value of "auto" will use "hs" if Hyperscan is
+# available, "ac" otherwise.
+#
+# The mpm you choose also decides the distribution of mpm contexts for
+# signature groups, specified by the conf - "detect.sgh-mpm-context".
+# Selecting "ac" as the mpm would require "detect.sgh-mpm-context"
+# to be set to "single", because of ac's memory requirements, unless the
+# ruleset is small enough to fit in one's memory, in which case one can
+# use "full" with "ac". Rest of the mpms can be run in "full" mode.
+#
+# There is also a CUDA pattern matcher (only available if Suricata was
+# compiled with --enable-cuda: b2g_cuda. Make sure to update your
+# max-pending-packets setting above as well if you use b2g_cuda.
+
+mpm-algo: auto
+
+# Select the matching algorithm you want to use for single-pattern searches.
+#
+# Supported algorithms are "bm" (Boyer-Moore) and "hs" (Hyperscan, only
+# available if Suricata has been built with Hyperscan support).
+#
+# The default of "auto" will use "hs" if available, otherwise "bm".
+
+spm-algo: auto
+
+# Suricata is multi-threaded. Here the threading can be influenced.
+threading:
+ set-cpu-affinity: no
+ # Tune cpu affinity of threads. Each family of threads can be bound
+ # on specific CPUs.
+ #
+ # These 2 apply to the all runmodes:
+ # management-cpu-set is used for flow timeout handling, counters
+ # worker-cpu-set is used for 'worker' threads
+ #
+ # Additionally, for autofp these apply:
+ # receive-cpu-set is used for capture threads
+ # verdict-cpu-set is used for IPS verdict threads
+ #
+ cpu-affinity:
+ - management-cpu-set:
+ cpu: [ 0 ] # include only these cpus in affinity settings
+ - receive-cpu-set:
+ cpu: [ 0 ] # include only these cpus in affinity settings
+ - worker-cpu-set:
+ cpu: [ "all" ]
+ mode: "exclusive"
+ # Use explicitely 3 threads and don't compute number by using
+ # detect-thread-ratio variable:
+ # threads: 3
+ prio:
+ low: [ 0 ]
+ medium: [ "1-2" ]
+ high: [ 3 ]
+ default: "medium"
+ #- verdict-cpu-set:
+ # cpu: [ 0 ]
+ # prio:
+ # default: "high"
+ #
+ # By default Suricata creates one "detect" thread per available CPU/CPU core.
+ # This setting allows controlling this behaviour. A ratio setting of 2 will
+ # create 2 detect threads for each CPU/CPU core. So for a dual core CPU this
+ # will result in 4 detect threads. If values below 1 are used, less threads
+ # are created. So on a dual core CPU a setting of 0.5 results in 1 detect
+ # thread being created. Regardless of the setting at a minimum 1 detect
+ # thread will always be created.
+ #
+ detect-thread-ratio: 1.0
+
+# Luajit has a strange memory requirement, it's 'states' need to be in the
+# first 2G of the process' memory.
+#
+# 'luajit.states' is used to control how many states are preallocated.
+# State use: per detect script: 1 per detect thread. Per output script: 1 per
+# script.
+luajit:
+ states: 128
+
+# Profiling settings. Only effective if Suricata has been built with the
+# the --enable-profiling configure flag.
+#
+profiling:
+ # Run profiling for every xth packet. The default is 1, which means we
+ # profile every packet. If set to 1000, one packet is profiled for every
+ # 1000 received.
+ #sample-rate: 1000
+
+ # rule profiling
+ rules:
+
+ # Profiling can be disabled here, but it will still have a
+ # performance impact if compiled in.
+ enabled: yes
+ filename: rule_perf.log
+ append: yes
+
+ # Sort options: ticks, avgticks, checks, matches, maxticks
+ # If commented out all the sort options will be used.
+ #sort: avgticks
+
+ # Limit the number of sids for which stats are shown at exit (per sort).
+ limit: 10
+
+ # output to json
+ json: yes
+
+ # per keyword profiling
+ keywords:
+ enabled: yes
+ filename: keyword_perf.log
+ append: yes
+
+ # per rulegroup profiling
+ rulegroups:
+ enabled: yes
+ filename: rule_group_perf.log
+ append: yes
+
+ # packet profiling
+ packets:
+
+ # Profiling can be disabled here, but it will still have a
+ # performance impact if compiled in.
+ enabled: yes
+ filename: packet_stats.log
+ append: yes
+
+ # per packet csv output
+ csv:
+
+ # Output can be disabled here, but it will still have a
+ # performance impact if compiled in.
+ enabled: no
+ filename: packet_stats.csv
+
+ # profiling of locking. Only available when Suricata was built with
+ # --enable-profiling-locks.
+ locks:
+ enabled: no
+ filename: lock_stats.log
+ append: yes
+
+ pcap-log:
+ enabled: no
+ filename: pcaplog_stats.log
+ append: yes
+
+##
+## Netfilter integration
+##
+
+# When running in NFQ inline mode, it is possible to use a simulated
+# non-terminal NFQUEUE verdict.
+# This permit to do send all needed packet to suricata via this a rule:
+# iptables -I FORWARD -m mark ! --mark $MARK/$MASK -j NFQUEUE
+# And below, you can have your standard filtering ruleset. To activate
+# this mode, you need to set mode to 'repeat'
+# If you want packet to be sent to another queue after an ACCEPT decision
+# set mode to 'route' and set next-queue value.
+# On linux >= 3.1, you can set batchcount to a value > 1 to improve performance
+# by processing several packets before sending a verdict (worker runmode only).
+# On linux >= 3.6, you can set the fail-open option to yes to have the kernel
+# accept the packet if suricata is not able to keep pace.
+# bypass mark and mask can be used to implement NFQ bypass. If bypass mark is
+# set then the NFQ bypass is activated. Suricata will set the bypass mark/mask
+# on packet of a flow that need to be bypassed. The Nefilter ruleset has to
+# directly accept all packets of a flow once a packet has been marked.
+nfq:
+# mode: accept
+# repeat-mark: 1
+# repeat-mask: 1
+# bypass-mark: 1
+# bypass-mask: 1
+# route-queue: 2
+# batchcount: 20
+# fail-open: yes
+
+#nflog support
+nflog:
+ # netlink multicast group
+ # (the same as the iptables --nflog-group param)
+ # Group 0 is used by the kernel, so you can't use it
+ - group: 2
+ # netlink buffer size
+ buffer-size: 18432
+ # put default value here
+ - group: default
+ # set number of packet to queue inside kernel
+ qthreshold: 1
+ # set the delay before flushing packet in the queue inside kernel
+ qtimeout: 100
+ # netlink max buffer size
+ max-size: 20000
+
+##
+## Advanced Capture Options
+##
+
+# general settings affecting packet capture
+capture:
+ # disable NIC offloading. It's restored when Suricata exists.
+ # Enabled by default
+ #disable-offloading: false
+ #
+ # disable checksum validation. Same as setting '-k none' on the
+ # commandline
+ #checksum-validation: none
+
+# Netmap support
+#
+# Netmap operates with NIC directly in driver, so you need FreeBSD wich have
+# built-in netmap support or compile and install netmap module and appropriate
+# NIC driver on your Linux system.
+# To reach maximum throughput disable all receive-, segmentation-,
+# checksum- offloadings on NIC.
+# Disabling Tx checksum offloading is *required* for connecting OS endpoint
+# with NIC endpoint.
+# You can find more information at https://github.com/luigirizzo/netmap
+#
+netmap:
+ # To specify OS endpoint add plus sign at the end (e.g. "eth0+")
+ - interface: eth2
+ # Number of receive threads. "auto" uses number of RSS queues on interface.
+ #threads: auto
+ # You can use the following variables to activate netmap tap or IPS mode.
+ # If copy-mode is set to ips or tap, the traffic coming to the current
+ # interface will be copied to the copy-iface interface. If 'tap' is set, the
+ # copy is complete. If 'ips' is set, the packet matching a 'drop' action
+ # will not be copied.
+ # To specify the OS as the copy-iface (so the OS can route packets, or forward
+ # to a service running on the same machine) add a plus sign at the end
+ # (e.g. "copy-iface: eth0+"). Don't forget to set up a symmetrical eth0+ -> eth0
+ # for return packets. Hardware checksumming must be *off* on the interface if
+ # using an OS endpoint (e.g. 'ifconfig eth0 -rxcsum -txcsum -rxcsum6 -txcsum6' for FreeBSD
+ # or 'ethtool -K eth0 tx off rx off' for Linux).
+ #copy-mode: tap
+ #copy-iface: eth3
+ # Set to yes to disable promiscuous mode
+ # disable-promisc: no
+ # Choose checksum verification mode for the interface. At the moment
+ # of the capture, some packets may be with an invalid checksum due to
+ # offloading to the network card of the checksum computation.
+ # Possible values are:
+ # - yes: checksum validation is forced
+ # - no: checksum validation is disabled
+ # - auto: suricata uses a statistical approach to detect when
+ # checksum off-loading is used.
+ # Warning: 'checksum-validation' must be set to yes to have any validation
+ #checksum-checks: auto
+ # BPF filter to apply to this interface. The pcap filter syntax apply here.
+ #bpf-filter: port 80 or udp
+ #- interface: eth3
+ #threads: auto
+ #copy-mode: tap
+ #copy-iface: eth2
+ # Put default values here
+ - interface: default
+
+# PF_RING configuration. for use with native PF_RING support
+# for more info see http://www.ntop.org/products/pf_ring/
+pfring:
+ - interface: eth0
+ # Number of receive threads (>1 will enable experimental flow pinned
+ # runmode)
+ threads: 1
+
+ # Default clusterid. PF_RING will load balance packets based on flow.
+ # All threads/processes that will participate need to have the same
+ # clusterid.
+ cluster-id: 99
+
+ # Default PF_RING cluster type. PF_RING can load balance per flow.
+ # Possible values are cluster_flow or cluster_round_robin.
+ cluster-type: cluster_flow
+ # bpf filter for this interface
+ #bpf-filter: tcp
+ # Choose checksum verification mode for the interface. At the moment
+ # of the capture, some packets may be with an invalid checksum due to
+ # offloading to the network card of the checksum computation.
+ # Possible values are:
+ # - rxonly: only compute checksum for packets received by network card.
+ # - yes: checksum validation is forced
+ # - no: checksum validation is disabled
+ # - auto: suricata uses a statistical approach to detect when
+ # checksum off-loading is used. (default)
+ # Warning: 'checksum-validation' must be set to yes to have any validation
+ #checksum-checks: auto
+ # Second interface
+ #- interface: eth1
+ # threads: 3
+ # cluster-id: 93
+ # cluster-type: cluster_flow
+ # Put default values here
+ - interface: default
+ #threads: 2
+
+# For FreeBSD ipfw(8) divert(4) support.
+# Please make sure you have ipfw_load="YES" and ipdivert_load="YES"
+# in /etc/loader.conf or kldload'ing the appropriate kernel modules.
+# Additionally, you need to have an ipfw rule for the engine to see
+# the packets from ipfw. For Example:
+#
+# ipfw add 100 divert 8000 ip from any to any
+#
+# The 8000 above should be the same number you passed on the command
+# line, i.e. -d 8000
+#
+ipfw:
+
+ # Reinject packets at the specified ipfw rule number. This config
+ # option is the ipfw rule number AT WHICH rule processing continues
+ # in the ipfw processing system after the engine has finished
+ # inspecting the packet for acceptance. If no rule number is specified,
+ # accepted packets are reinjected at the divert rule which they entered
+ # and IPFW rule processing continues. No check is done to verify
+ # this will rule makes sense so care must be taken to avoid loops in ipfw.
+ #
+ ## The following example tells the engine to reinject packets
+ # back into the ipfw firewall AT rule number 5500:
+ #
+ # ipfw-reinjection-rule-number: 5500
+
+
+napatech:
+ # The Host Buffer Allowance for all streams
+ # (-1 = OFF, 1 - 100 = percentage of the host buffer that can be held back)
+ # This may be enabled when sharing streams with another application.
+ # Otherwise, it should be turned off.
+ hba: -1
+
+ # use_all_streams set to "yes" will query the Napatech service for all configured
+ # streams and listen on all of them. When set to "no" the streams config array
+ # will be used.
+ use-all-streams: yes
+
+ # The streams to listen on. This can be either:
+ # a list of individual streams (e.g. streams: [0,1,2,3])
+ # or
+ # a range of streams (e.g. streams: ["0-3"])
+ streams: ["0-3"]
+
+# Tilera mpipe configuration. for use on Tilera TILE-Gx.
+mpipe:
+
+ # Load balancing modes: "static", "dynamic", "sticky", or "round-robin".
+ load-balance: dynamic
+
+ # Number of Packets in each ingress packet queue. Must be 128, 512, 2028 or 65536
+ iqueue-packets: 2048
+
+ # List of interfaces we will listen on.
+ inputs:
+ - interface: xgbe2
+ - interface: xgbe3
+ - interface: xgbe4
+
+
+ # Relative weight of memory for packets of each mPipe buffer size.
+ stack:
+ size128: 0
+ size256: 9
+ size512: 0
+ size1024: 0
+ size1664: 7
+ size4096: 0
+ size10386: 0
+ size16384: 0
+
+##
+## Hardware accelaration
+##
+
+# Cuda configuration.
+cuda:
+ # The "mpm" profile. On not specifying any of these parameters, the engine's
+ # internal default values are used, which are same as the ones specified in
+ # in the default conf file.
+ mpm:
+ # The minimum length required to buffer data to the gpu.
+ # Anything below this is MPM'ed on the CPU.
+ # Can be specified in kb, mb, gb. Just a number indicates it's in bytes.
+ # A value of 0 indicates there's no limit.
+ data-buffer-size-min-limit: 0
+ # The maximum length for data that we would buffer to the gpu.
+ # Anything over this is MPM'ed on the CPU.
+ # Can be specified in kb, mb, gb. Just a number indicates it's in bytes.
+ data-buffer-size-max-limit: 1500
+ # The ring buffer size used by the CudaBuffer API to buffer data.
+ cudabuffer-buffer-size: 500mb
+ # The max chunk size that can be sent to the gpu in a single go.
+ gpu-transfer-size: 50mb
+ # The timeout limit for batching of packets in microseconds.
+ batching-timeout: 2000
+ # The device to use for the mpm. Currently we don't support load balancing
+ # on multiple gpus. In case you have multiple devices on your system, you
+ # can specify the device to use, using this conf. By default we hold 0, to
+ # specify the first device cuda sees. To find out device-id associated with
+ # the card(s) on the system run "suricata --list-cuda-cards".
+ device-id: 0
+ # No of Cuda streams used for asynchronous processing. All values > 0 are valid.
+ # For this option you need a device with Compute Capability > 1.0.
+ cuda-streams: 2
+
+##
+## Include other configs
+##
+
+# Includes. Files included here will be handled as if they were
+# inlined in this configuration file.
+#include: include1.yaml
+#include: include2.yaml