load_lib remote.exp
load_lib gdb.exp
-set gdb_prompt "\\(gdbslet\\)"
-
#
# Sparclet remote run command.
#
-# This requires that we beep the user and ask him to push the board reset!
-# Then we will switch to the monitor target, run the program, use 2 ^C's
-# to interrupt the monitor target, and switch back to the remote target.
-# Then we have to do a continue to get past the stub breakpoint.
-#
proc gdb_start { } {
global gdb_prompt
- global GDB
- if { [default_gdb_start] != 0 } {
- return -1;
+ if ![file exists loader] {
+ global libdir
+ set loader loader;
+
+ if [target_info exists gdb_stub_offset] {
+ set result [target_compile "${libdir}/sparclet-loader.c" $loader executable "libs=-Wl,-Ttext,[target_info gdb_stub_offset]"];
+ } else {
+ set result [target_compile "${libdir}/sparclet-loader.c" $loader executable "ldscript=[target_info gdb_stub_ldscript]"];
+ }
}
- if [target_info exists baud] {
- send_gdb "set remotebaud [target_info baud]\n"
- gdb_expect {
- -re ".*$gdb_prompt" { }
- default {
- perror "Error setting baud rate."
- return -1;
+ verbose -log "$gdb_prompt is gdb prompt"
+
+ set result 0;
+ for { set y 0; } { $y < 4 } { incr y } {
+ if { [default_gdb_start] != 0 } {
+ return -1;
+ }
+
+ if [target_info exists baud] {
+ send_gdb "set remotebaud [target_info baud]\n"
+ gdb_expect {
+ -re "$gdb_prompt" { }
+ default {
+ perror "Error setting baud rate."
+ return -1;
+ }
}
}
- }
- for {set x 1;} { $x < 4 } {incr x} {
- if { [gdb_sparclet_startup] > 0 } {
- break;
+ for {set x 1;} { $x < 4 } {incr x} {
+ set result [gdb_sparclet_startup $result];
+ if { $result > 0 } {
+ return 1;
+ }
+ # mmmmm, magic numbers.
+ if { $result == -42 || $result == -43 } {
+ break;
+ } else {
+ reboot_target;
+ }
}
- reboot_target;
+ if { $x == 4 } {
+ return -1;
+ }
+ gdb_exit;
+ sleep 5;
}
- return 1;
+ return -1;
}
-proc gdb_sparclet_startup { } {
+proc gdb_sparclet_startup { arg } {
global gdb_prompt
global GDB
- set timeout 5;
set is_running_stub 0;
- send_gdb "target sparclet [target_info serial]\n";
- gdb_expect {
- -re ".*already.*y or n." {
- gdb_send "y\n";
- exp_continue;
+ if [target_info exists serial] {
+ set serial [target_info serial];
+ } else {
+ set serial [target_info netport];
+ }
+ set protocol [target_info gdb_protocol];
+ set check_stub 1;
+ if { $arg != -42 } {
+ send_gdb "target $protocol $serial\n";
+ # 10 seconds may be a bit short.
+ gdb_expect 10 {
+ -re "already.*y or n." {
+ gdb_send "y\n";
+ exp_continue;
+ }
+ -re "Remote target.*connected to.*$gdb_prompt" { set check_stub 0; }
+ -re "$gdb_prompt" { }
+ timeout { }
}
- -re "Remote target.*connected to.*$gdb_prompt" { }
- timeout {
+ if { $check_stub } {
verbose "timed out, checking if stub is already running"
- set timeout 10
send_gdb "\003";
- gdb_expect {
- -re ".*$gdb_prompt" {
- }
- default {
- perror "sparclet board isn't responding";
- return -1;
+ sleep 1;
+ send_gdb "\003";
+ gdb_expect 10 {
+ -re "$gdb_prompt" { }
+ default {
+ remote_close host;
+ return -42;
}
}
- send_gdb "target remote [target_info gdb_serial]\n";
- gdb_expect {
- -re ".*Remote debugging.*$gdb_prompt" {
- verbose "stub is already running"
- set is_running_stub 1;
- }
- default {
- perror "sparclet board isn't responding";
- return -1;
- }
+ }
+ }
+ if [target_info exists gdb_serial] {
+ set gdb_serial [target_info gdb_serial];
+ } else {
+ set gdb_serial $serial;
+ }
+ if { $check_stub } {
+ send_gdb "target remote $gdb_serial\n";
+ gdb_expect 15 {
+ -re "Remote debugging.*$gdb_prompt" {
+ verbose "stub is already running"
+ set is_running_stub 1;
+ }
+ default {
+ warning "board isn't responding";
+ remote_close host;
+ remote_reboot target;
+ return -43;
}
}
}
if { $is_running_stub == 0 } {
global srcdir
- if ![file exists loader] {
- set result [target_compile "${srcdir}/config/sparclet-loader.c" "loader" executable "libs=-Wl,-Ttext,[target_info gdb_stub_offset]"];
+ if [is_remote host] {
+ set loader [remote_download host "loader"];
+ } else {
+ set loader "loader";
}
- set loader "loader";
send_gdb "file $loader\n";
gdb_expect {
-re "A program is being debug.*Kill it.*y or n. $" {
}
}
- send_gdb "target [target_info gdb_protocol] [target_info serial]\n";
+ send_gdb "target $protocol $serial\n";
gdb_expect {
-re "Remote target.*connected to.*$gdb_prompt" { }
default {
- perror "Error reconnecting to sparclet.";
+ perror "Error reconnecting to board.";
return -1;
}
}
send_gdb "load $loader [target_info gdb_stub_offset]\n"
verbose "Loading $loader into $GDB" 2
- set timeout 1200
- verbose "Timeout is now $timeout seconds" 2
- gdb_expect {
+ gdb_expect 1200 {
-re "Loading.*$gdb_prompt $" {
verbose "Loaded $loader into $GDB" 1
- set timeout 60
- verbose "Timeout is now $timeout seconds" 2
}
-re "$gdb_prompt $" {
if $verbose>1 then {
}
send_gdb "run\n";
- gdb_expect {
+ gdb_expect 60 {
-re "A program is being debug.*Kill it.*y or n. $" {
send_gdb "y\n"
exp_continue
send_gdb "y\n"
exp_continue
}
- -re ".*Starting program:.*loader.*$" {
+ -re "Starting program:.*loader.*$" {
verbose "Starting loader succeeded"
}
- timeout {
+ timeout {
perror "(timeout) starting the loader" ;
return -1
}
- default {
+ default {
perror "error starting the loader";
}
}
sleep 1;
send_gdb "\ 3"
verbose "Sent ^C^C"
- gdb_expect {
- -re ".*Give up .and stop debugging it.*$" {
+ gdb_expect 10 {
+ -re "Give up .and stop debugging it.*$" {
send_gdb "y\n"
exp_continue
}
- -re ".*$gdb_prompt $" {
+ -re "$gdb_prompt $" {
verbose "Running loader succeeded"
}
- timeout {
- perror "(timeout) interrupting the loader" ;
- return -1
+ timeout {
+ warning "(timeout) interrupting the loader" ;
+ remote_close host;
}
- default {
- perror "error interrupting the loader";
+ default {
+ warning "error interrupting the loader";
}
}
gdb_breakpoint exit;
send_gdb "set \$fp=0\n";
gdb_expect {
- -re ".*$gdb_prompt" { }
+ -re "$gdb_prompt" { }
}
- send_gdb "jump start\n";
- gdb_expect {
- -re ".*y or n. $" {
- send_gdb "y\n"
+ # This is needed for the SparcLite. Whee.
+ if [target_info exists gdb,start_symbol] {
+ set start_comm "jump *[target_info gdb,start_symbol]\n";
+ } else {
+ set start_comm "jump *start\n";
+ }
+ send_gdb "break copyloop\n";
+ gdb_expect 10 {
+ -re "Breakpoint.*$gdb_prompt $" {
+ set start_comm "continue\n";
}
- -re "Continuing at.*\[\r\n\]" { }
- default {
- return "failed"
+ -re "$gdb_prompt $" { }
+ timeout { warning "break copyloop failed badly"; }
+ }
+ send_gdb $start_comm;
+ gdb_expect 10 {
+ -re "y or n. $" {
+ remote_send host "y\n"
+ exp_continue;
+ }
+ -re "Breakpoint.*in copyloop.*$gdb_prompt $" {
+ remote_send host "jump relocd\n";
+ exp_continue;
+ }
+ -re "Continuing at.*\[\r\n\]" { }
+ default {
+ return -1;
}
}
+
return "";
}
set loadfile [file tail $arg]
set loadpath [file dirname $arg]
- if [target_info exists gdb_protocol] {
- set protocol [target_info gdb_protocol];
- } else {
- set protocol "sparclet"
- }
+ set protocol [target_info gdb_protocol];
+ if [is_remote host] {
+ set arg [remote_download host $arg];
+ }
send_gdb "file $arg\n"
- gdb_expect {
+ gdb_expect 30 {
-re "A program is being debug.*Kill it.*y or n. $" {
send_gdb "y\n"
exp_continue
}
if [target_info exists gdb_serial] {
- send_gdb "target remote [target_info gdb_serial]\n"
- gdb_expect {
- -re ".*Kill it?.*y or n.*" {
- send_gdb "y\n";
- exp_continue
- }
- -re ".*$gdb_prompt $" {
- verbose "Set remote target to [target_info serial]" 2
- }
- timeout {
- set timeout 10
- verbose "Timeout is now $timeout seconds" 2
- perror "Couldn't set remote target."
- return -1
- }
+ set gdb_serial [target_info gdb_serial];
+ } else {
+ if [target_info exists serial] {
+ set gdb_serial [target_info serial];
+ } else {
+ set gdb_serial [target_info netport];
+ }
+ }
+ send_gdb "target remote $gdb_serial\n"
+ gdb_expect 30 {
+ -re "Kill it?.*y or n.*" {
+ send_gdb "y\n";
+ exp_continue
+ }
+ -re "$gdb_prompt $" {
+ verbose "Set remote target to $gdb_serial" 2
+ }
+ timeout {
+ perror "Couldn't set remote target."
+ return -1
}
}
if [target_info exists gdb_load_offset] {
}
send_gdb "load $arg $offset\n"
verbose "Loading $arg into $GDB" 2
- set timeout 1200
- verbose "Timeout is now $timeout seconds" 2
- gdb_expect {
+ gdb_expect 1200 {
-re "Loading.*$gdb_prompt $" {
verbose "Loaded $arg into $GDB" 1
- set timeout 60
- verbose "Timeout is now $timeout seconds" 2
}
-re "$gdb_prompt $" {
if $verbose>1 then {
}
}
send_gdb "list main\n";
- gdb_expect {
- -re ".*$gdb_prompt" { }
+ gdb_expect 60 {
+ -re "$gdb_prompt" { }
default {
perror "command for list main never completed";
return -1;
projects / thirdparty / binutils-gdb.git / commitdiff
