sim: h8300: move arch-specific settings to internal header

There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so move it all out to a new header which only
this port will include.

diff --git a/sim/h8300/compile.c b/sim/h8300/compile.c
index 077bc6dff0971bb4813953304ff605c50518840b..cc8b52c5d6548ceb4ba30f8864820092f5abfb08 100644 (file)
--- a/sim/h8300/compile.c
+++ b/sim/h8300/compile.c
@@ -36,6 +36,8 @@
 #include "sim-signal.h"
 #include "sim/callback.h"
 
+#include "h8300-sim.h"
+
 #ifndef SIGTRAP
 # define SIGTRAP 5
 #endif

diff --git a/sim/h8300/h8300-sim.h b/sim/h8300/h8300-sim.h
new file mode 100644 (file)
index 0000000..a6bea63
--- /dev/null
+++ b/sim/h8300/h8300-sim.h
@@ -0,0 +1,153 @@
+/* Main header for the Hitachi h8/300 architecture.  */
+
+#ifndef H8300_SIM_H
+#define H8300_SIM_H
+
+#define DEBUG
+
+/* These define the size of main memory for the simulator.
+
+   Note the size of main memory for the H8/300H is only 256k.  Keeping it
+   small makes the simulator run much faster and consume less memory.
+
+   The linker knows about the limited size of the simulator's main memory
+   on the H8/300H (via the h8300h.sc linker script).  So if you change
+   H8300H_MSIZE, be sure to fix the linker script too.
+
+   Also note that there's a separate "eightbit" area aside from main
+   memory.  For simplicity, the simulator assumes any data memory reference
+   outside of main memory refers to the eightbit area (in theory, this
+   can only happen when simulating H8/300H programs).  We make no attempt
+   to catch overlapping addresses, wrapped addresses, etc etc.  */
+
+#define H8300_MSIZE (1 << 16)
+
+/* avolkov:
+   Next 2 macros are ugly for any workstation, but while they're work.
+   Memory size MUST be configurable.  */
+#define H8300H_MSIZE (1 << 24)
+#define H8300S_MSIZE (1 << 24)
+
+#define CSIZE 1024
+
+enum h8_regnum {
+  R0_REGNUM = 0,
+  R1_REGNUM = 1,
+  R2_REGNUM = 2,
+  R3_REGNUM = 3,
+  R4_REGNUM = 4,
+  R5_REGNUM = 5,
+  R6_REGNUM = 6,
+  R7_REGNUM = 7,
+
+  SP_REGNUM = R7_REGNUM,       /* Contains address of top of stack */
+  FP_REGNUM = R6_REGNUM,       /* Contains address of executing
+                                  stack frame */
+  CCR_REGNUM = 8,              /* Contains processor status */
+  PC_REGNUM  = 9,              /* Contains program counter */
+  CYCLE_REGNUM = 10,
+  EXR_REGNUM  = 11,
+  INST_REGNUM = 12,
+  TICK_REGNUM = 13,
+  MACH_REGNUM = 14,
+  MACL_REGNUM = 15,
+  SBR_REGNUM =  16,
+  VBR_REGNUM =  17,
+
+  ZERO_REGNUM = 18
+};
+
+enum h8_typecodes {
+  OP_NULL,
+  OP_REG,              /* Register direct.  */
+  OP_LOWREG,           /* Special reg syntax for "bra".  */
+  OP_DISP,             /* Register indirect w/displacement.  */
+  /* Note: h8300, h8300h, and h8300s permit only pre-decr and post-incr.  */
+  OP_PREDEC,           /* Register indirect w/pre-decrement.  */
+  OP_POSTDEC,          /* Register indirect w/post-decrement.  */
+  OP_PREINC,           /* Register indirect w/pre-increment.  */
+  OP_POSTINC,          /* Register indirect w/post-increment.  */
+  OP_PCREL,            /* PC Relative.  */
+  OP_MEM,              /* Absolute memory address.  */
+  OP_CCR,              /* Condition Code Register.  */
+  OP_IMM,              /* Immediate value.  */
+  /*OP_ABS*/           /* Un-used (duplicates op_mem?).  */
+  OP_EXR,              /* EXtended control Register.  */
+  OP_SBR,              /* Vector Base Register.  */
+  OP_VBR,              /* Short-address Base Register.  */
+  OP_MACH,             /* Multiply Accumulator - high.  */
+  OP_MACL,             /* Multiply Accumulator - low.   */
+  /* FIXME: memory indirect?  */
+  OP_INDEXB,           /* Byte index mode */
+  OP_INDEXW,           /* Word index mode */
+  OP_INDEXL,           /* Long index mode */
+  OP_REG_DEC,          /* Register direct. affect address decrement. */
+  OP_REG_INC,          /* Register direct. affect address increment. */
+};
+
+/* Structure used to describe addressing */
+
+typedef struct
+{
+  int type;
+  int reg;
+  int literal;
+} ea_type;
+
+/* Struct for instruction decoder.  */
+typedef struct
+{
+  ea_type src;
+  ea_type dst;
+  ea_type op3;
+  int opcode;
+  int next_pc;
+  int oldpc;
+  int cycles;
+#ifdef DEBUG
+  struct h8_opcode *op;
+#endif
+} decoded_inst;
+
+struct h8300_sim_cpu {
+  unsigned int regs[20];       /* 8 GR's plus ZERO, SBR, and VBR.  */
+  unsigned int pc;
+
+  int macS;                    /* MAC Saturating mode */
+  int macV;                    /* MAC Overflow */
+  int macN;                    /* MAC Negative */
+  int macZ;                    /* MAC Zero     */
+
+  int delayed_branch;
+  char **command_line;         /* Pointer to command line arguments.  */
+
+  unsigned char *memory;
+  int mask;
+};
+#define H8300_SIM_CPU(sd) ((struct h8300_sim_cpu *) CPU_ARCH_DATA (sd))
+
+struct h8300_sim_state {
+  unsigned long memory_size;
+#ifdef ADEBUG
+  int stats[O_LAST];
+#endif
+};
+#define H8300_SIM_STATE(sd) ((struct h8300_sim_state *) STATE_ARCH_DATA (sd))
+
+/* The current state of the processor; registers, memory, etc.  */
+
+#define cpu_set_pc(cpu, val)   (H8300_SIM_CPU (cpu)->pc = (val))
+#define cpu_get_pc(cpu)                (H8300_SIM_CPU (cpu)->pc)
+
+/* Magic numbers used to distinguish an exit from a breakpoint.  */
+#define LIBC_EXIT_MAGIC1 0xdead
+#define LIBC_EXIT_MAGIC2 0xbeef
+/* Local version of macros for decoding exit status.
+   (included here rather than try to find target version of wait.h)
+*/
+#define SIM_WIFEXITED(V)       (((V) & 0xff) == 0)
+#define SIM_WIFSTOPPED(V)      (!SIM_WIFEXITED (V))
+#define SIM_WEXITSTATUS(V)     (((V) >> 8) & 0xff)
+#define SIM_WSTOPSIG(V)                ((V) & 0x7f)
+
+#endif /* H8300_SIM_H */

diff --git a/sim/h8300/sim-main.h b/sim/h8300/sim-main.h
index c034699e5c55a9472b55086d76faad37d2703037..003e19ce512f79feee5340effd0371c456b1eb2c 100644 (file)
--- a/sim/h8300/sim-main.h
+++ b/sim/h8300/sim-main.h
@@ -3,154 +3,7 @@
 #ifndef SIM_MAIN_H
 #define SIM_MAIN_H
 
-#define DEBUG
-
-/* These define the size of main memory for the simulator.
-
-   Note the size of main memory for the H8/300H is only 256k.  Keeping it
-   small makes the simulator run much faster and consume less memory.
-
-   The linker knows about the limited size of the simulator's main memory
-   on the H8/300H (via the h8300h.sc linker script).  So if you change
-   H8300H_MSIZE, be sure to fix the linker script too.
-
-   Also note that there's a separate "eightbit" area aside from main
-   memory.  For simplicity, the simulator assumes any data memory reference
-   outside of main memory refers to the eightbit area (in theory, this
-   can only happen when simulating H8/300H programs).  We make no attempt
-   to catch overlapping addresses, wrapped addresses, etc etc.  */
-
-#define H8300_MSIZE (1 << 16)
-
-/* avolkov: 
-   Next 2 macros are ugly for any workstation, but while they're work.
-   Memory size MUST be configurable.  */
-#define H8300H_MSIZE (1 << 24) 
-#define H8300S_MSIZE (1 << 24) 
-
-#define CSIZE 1024
-
-enum h8_regnum {
-  R0_REGNUM = 0,
-  R1_REGNUM = 1,
-  R2_REGNUM = 2,
-  R3_REGNUM = 3,
-  R4_REGNUM = 4,
-  R5_REGNUM = 5,
-  R6_REGNUM = 6,
-  R7_REGNUM = 7,
-
-  SP_REGNUM = R7_REGNUM,       /* Contains address of top of stack */
-  FP_REGNUM = R6_REGNUM,       /* Contains address of executing
-                                  stack frame */
-  CCR_REGNUM = 8,              /* Contains processor status */
-  PC_REGNUM  = 9,              /* Contains program counter */
-  CYCLE_REGNUM = 10,
-  EXR_REGNUM  = 11,
-  INST_REGNUM = 12,
-  TICK_REGNUM = 13,
-  MACH_REGNUM = 14,
-  MACL_REGNUM = 15,
-  SBR_REGNUM =  16,
-  VBR_REGNUM =  17,
-
-  ZERO_REGNUM = 18
-};
-
-enum h8_typecodes {
-  OP_NULL,
-  OP_REG,              /* Register direct.  */
-  OP_LOWREG,           /* Special reg syntax for "bra".  */
-  OP_DISP,             /* Register indirect w/displacement.  */
-  /* Note: h8300, h8300h, and h8300s permit only pre-decr and post-incr.  */
-  OP_PREDEC,           /* Register indirect w/pre-decrement.  */
-  OP_POSTDEC,          /* Register indirect w/post-decrement.  */
-  OP_PREINC,           /* Register indirect w/pre-increment.  */
-  OP_POSTINC,          /* Register indirect w/post-increment.  */
-  OP_PCREL,            /* PC Relative.  */
-  OP_MEM,              /* Absolute memory address.  */
-  OP_CCR,              /* Condition Code Register.  */
-  OP_IMM,              /* Immediate value.  */
-  /*OP_ABS*/           /* Un-used (duplicates op_mem?).  */
-  OP_EXR,              /* EXtended control Register.  */
-  OP_SBR,              /* Vector Base Register.  */
-  OP_VBR,              /* Short-address Base Register.  */
-  OP_MACH,             /* Multiply Accumulator - high.  */
-  OP_MACL,             /* Multiply Accumulator - low.   */
-  /* FIXME: memory indirect?  */
-  OP_INDEXB,           /* Byte index mode */
-  OP_INDEXW,           /* Word index mode */
-  OP_INDEXL,           /* Long index mode */
-  OP_REG_DEC,          /* Register direct. affect address decrement. */
-  OP_REG_INC,          /* Register direct. affect address increment. */
-};
-
 #include "sim-basics.h"
 #include "sim-base.h"
 
-/* Structure used to describe addressing */
-
-typedef struct
-{
-  int type;
-  int reg;
-  int literal;
-} ea_type;
-
-/* Struct for instruction decoder.  */
-typedef struct
-{
-  ea_type src;
-  ea_type dst;
-  ea_type op3;
-  int opcode;
-  int next_pc;
-  int oldpc;
-  int cycles;
-#ifdef DEBUG
-  struct h8_opcode *op;
-#endif
-} decoded_inst;
-
-struct h8300_sim_cpu {
-  unsigned int regs[20];       /* 8 GR's plus ZERO, SBR, and VBR.  */
-  unsigned int pc;
-
-  int macS;                    /* MAC Saturating mode */
-  int macV;                    /* MAC Overflow */
-  int macN;                    /* MAC Negative */
-  int macZ;                    /* MAC Zero     */
-
-  int delayed_branch;
-  char **command_line;         /* Pointer to command line arguments.  */
-
-  unsigned char *memory;
-  int mask;
-};
-#define H8300_SIM_CPU(sd) ((struct h8300_sim_cpu *) CPU_ARCH_DATA (sd))
-
-struct h8300_sim_state {
-  unsigned long memory_size;
-#ifdef ADEBUG
-  int stats[O_LAST];
-#endif
-};
-#define H8300_SIM_STATE(sd) ((struct h8300_sim_state *) STATE_ARCH_DATA (sd))
-
-/* The current state of the processor; registers, memory, etc.  */
-
-#define cpu_set_pc(cpu, val)   (H8300_SIM_CPU (cpu)->pc = (val))
-#define cpu_get_pc(cpu)                (H8300_SIM_CPU (cpu)->pc)
-
-/* Magic numbers used to distinguish an exit from a breakpoint.  */
-#define LIBC_EXIT_MAGIC1 0xdead        
-#define LIBC_EXIT_MAGIC2 0xbeef        
-/* Local version of macros for decoding exit status.  
-   (included here rather than try to find target version of wait.h)
-*/
-#define SIM_WIFEXITED(V)       (((V) & 0xff) == 0)
-#define SIM_WIFSTOPPED(V)      (!SIM_WIFEXITED (V))
-#define SIM_WEXITSTATUS(V)     (((V) >> 8) & 0xff)
-#define SIM_WSTOPSIG(V)                ((V) & 0x7f)
-
 #endif /* SIM_MAIN_H */