+2007-10-25 Wu Zhou <woodzltc@cn.ibm.com>
+ Thiago Jung Bauermann <bauerman@br.ibm.com>
+
+ * c-lang.c (c_create_fundamental_type): Create fundamental
+ types for DFP.
+ * c-typeprint.c (c_type_print_varspec_prefix): Add
+ TYPE_CODE_DECFLOAT to no prefix needed case.
+ (c_type_print_varspec_suffix): Add TYPE_CODE_DECFLOAT to no
+ suffix needed case.
+ * c-valprint.c (c_val_print): Call print_decimal_floating to
+ print DFP values.
+ * dwarf2read.c (read_base_type): Read DW_ATE_decimal_float
+ attribute code and return TYPE_CODE_DECFLOAT.
+ (dwarf_base_type): Set dwarf2_fundamental_type for DFP values.
+ * gdbtypes.c (gdbtypes_post_init): Initialize builtin_decfloat,
+ builtin_decdouble and builtin_declong.
+ * gdbtypes.h (enum type_code): Add TYPE_CODE_DECFLOAT as a
+ type code for DFP.
+ (FT_DECFLOAT, FT_DBL_PREC_DECFLOAT, FT_EXT_PREC_DECFLOAT): New
+ types, for decimal floating point.
+ (FT_NUM_MEMBERS): Increment, new types added.
+ (struct builtin_type): Add builtin_decfloat, builtin_decdouble
+ and builtin_declong.
+ * valprint.c (print_decimal_floating): New function to print DFP
+ values.
+ * value.h (print_decimal_floating): Prototype.
+
2007-10-25 Wu Zhou <woodzltc@cn.ibm.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
/ TARGET_CHAR_BIT,
0, "long double", objfile);
break;
+ case FT_DECFLOAT:
+ type = init_type (TYPE_CODE_DECFLOAT,
+ 32 / 8,
+ 0, "decimal float", objfile);
+ break;
+ case FT_DBL_PREC_DECFLOAT:
+ type = init_type (TYPE_CODE_DECFLOAT,
+ 64 / 8,
+ 0, "decimal double", objfile);
+ break;
+ case FT_EXT_PREC_DECFLOAT:
+ type = init_type (TYPE_CODE_DECFLOAT,
+ 128 / 8,
+ 0, "decimal long double", objfile);
+ break;
case FT_COMPLEX:
type = init_type (TYPE_CODE_FLT,
2 * gdbarch_float_bit (current_gdbarch)
case TYPE_CODE_COMPLEX:
case TYPE_CODE_TEMPLATE:
case TYPE_CODE_NAMESPACE:
+ case TYPE_CODE_DECFLOAT:
/* These types need no prefix. They are listed here so that
gcc -Wall will reveal any types that haven't been handled. */
break;
case TYPE_CODE_COMPLEX:
case TYPE_CODE_TEMPLATE:
case TYPE_CODE_NAMESPACE:
+ case TYPE_CODE_DECFLOAT:
/* These types do not need a suffix. They are listed so that
gcc -Wall will report types that may not have been considered. */
break;
}
break;
+ case TYPE_CODE_DECFLOAT:
+ if (format)
+ print_scalar_formatted (valaddr + embedded_offset, type, format, 0, stream);
+ else
+ print_decimal_floating (valaddr + embedded_offset, type, stream);
+ break;
+
case TYPE_CODE_VOID:
fprintf_filtered (stream, "void");
break;
case DW_ATE_complex_float:
code = TYPE_CODE_COMPLEX;
break;
+ case DW_ATE_decimal_float:
+ code = TYPE_CODE_DECFLOAT;
+ break;
case DW_ATE_float:
code = TYPE_CODE_FLT;
break;
type = dwarf2_fundamental_type (objfile, FT_FLOAT, cu);
}
return type;
+ case DW_ATE_decimal_float:
+ if (size == 16)
+ type = dwarf2_fundamental_type (objfile, FT_DBL_PREC_DECFLOAT, cu);
+ else if (size == 8)
+ type = dwarf2_fundamental_type (objfile, FT_EXT_PREC_DECFLOAT, cu);
+ else
+ type = dwarf2_fundamental_type (objfile, FT_DECFLOAT, cu);
+ return type;
case DW_ATE_signed:
switch (size)
{
0,
"bool", (struct objfile *) NULL);
+ /* The following three are about decimal floating point types, which
+ are 32-bits, 64-bits and 128-bits respectively. */
+ builtin_type->builtin_decfloat
+ = init_type (TYPE_CODE_DECFLOAT, 32 / 8,
+ 0,
+ "decimal float", (struct objfile *) NULL);
+ builtin_type->builtin_decdouble
+ = init_type (TYPE_CODE_DECFLOAT, 64 / 8,
+ 0,
+ "decimal double", (struct objfile *) NULL);
+ builtin_type->builtin_declong
+ = init_type (TYPE_CODE_DECFLOAT, 128 / 8,
+ 0,
+ "decimal long double", (struct objfile *) NULL);
+
/* Pointer/Address types. */
/* NOTE: on some targets, addresses and pointers are not necessarily
#define FT_UNSIGNED_BYTE 27
#define FT_TEMPLATE_ARG 28
-#define FT_NUM_MEMBERS 29 /* Highest FT_* above, plus one. */
+/* The following three fundamental types are for decimal floating point. */
+#define FT_DECFLOAT 29
+#define FT_DBL_PREC_DECFLOAT 30
+#define FT_EXT_PREC_DECFLOAT 31
+
+#define FT_NUM_MEMBERS 32 /* Highest FT_* above, plus one. */
/* Some macros for char-based bitfields. */
TYPE_CODE_TEMPLATE, /* C++ template */
TYPE_CODE_TEMPLATE_ARG, /* C++ template arg */
- TYPE_CODE_NAMESPACE /* C++ namespace. */
+ TYPE_CODE_NAMESPACE, /* C++ namespace. */
+
+ TYPE_CODE_DECFLOAT /* Decimal floating point. */
};
/* For now allow source to use TYPE_CODE_CLASS for C++ classes, as an
struct type *builtin_bool;
struct type *builtin_long_long;
struct type *builtin_unsigned_long_long;
+ struct type *builtin_decfloat;
+ struct type *builtin_decdouble;
+ struct type *builtin_declong;
};
/* Return the type table for the specified architecture. */
#include "floatformat.h"
#include "doublest.h"
#include "exceptions.h"
+#include "dfp.h"
#include <errno.h>
#endif
}
+void
+print_decimal_floating (const gdb_byte *valaddr, struct type *type,
+ struct ui_file *stream)
+{
+ char decstr[MAX_DECIMAL_STRING];
+ unsigned len = TYPE_LENGTH (type);
+
+ decimal_to_string (valaddr, len, decstr);
+ fputs_filtered (decstr, stream);
+ return;
+}
+
void
print_binary_chars (struct ui_file *stream, const gdb_byte *valaddr,
unsigned len)
extern void print_floating (const gdb_byte *valaddr, struct type *type,
struct ui_file *stream);
+extern void print_decimal_floating (const gdb_byte *valaddr, struct type *type,
+ struct ui_file *stream);
+
extern int value_print (struct value *val, struct ui_file *stream, int format,
enum val_prettyprint pretty);
projects / thirdparty / binutils-gdb.git / commitdiff
