]> git.ipfire.org Git - people/ms/u-boot.git/commitdiff
davinci: display correct clock info
authorDavid Brownell <dbrownell@users.sourceforge.net>
Fri, 15 May 2009 21:47:12 +0000 (23:47 +0200)
committerWolfgang Denk <wd@denx.de>
Fri, 12 Jun 2009 18:39:49 +0000 (20:39 +0200)
Move the clock-rate dumping code into the cpu/.../davinci area
where it should have been, enabled by CONFIG_DISPLAY_CPUINFO,
updating the format and showing the DSP clock (where relevant).

Switch boards to use the cpuinfo() hook for this stuff.

Remove a few now-obsolete PLL #defines.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
13 files changed:
board/davinci/common/misc.c
board/davinci/common/misc.h
board/davinci/dvevm/dvevm.c
board/davinci/schmoogie/schmoogie.c
board/davinci/sffsdr/sffsdr.c
board/davinci/sonata/sonata.c
cpu/arm926ejs/davinci/Makefile
cpu/arm926ejs/davinci/cpu.c [new file with mode: 0644]
include/asm-arm/arch-davinci/hardware.h
include/configs/davinci_dvevm.h
include/configs/davinci_schmoogie.h
include/configs/davinci_sffsdr.h
include/configs/davinci_sonata.h

index cfab729bbbcee19464e0b857879793e22ea002b3..ffdc20b93ab82e5d88bb557eea5d4e7884004b62 100644 (file)
@@ -28,6 +28,7 @@
 #include <net.h>
 #include <asm/arch/hardware.h>
 
+
 DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
@@ -38,18 +39,6 @@ int dram_init(void)
        return(0);
 }
 
-static int dv_get_pllm_output(uint32_t pllm)
-{
-       return (pllm + 1) * (CONFIG_SYS_HZ_CLOCK / 1000000);
-}
-
-void dv_display_clk_infos(void)
-{
-       printf("ARM Clock: %dMHz\n", dv_get_pllm_output(REG(PLL1_PLLM)) / 2);
-       printf("DDR Clock: %dMHz\n", dv_get_pllm_output(REG(PLL2_PLLM)) /
-              ((REG(PLL2_DIV2) & 0x1f) + 1) / 2);
-}
-
 #ifdef CONFIG_DRIVER_TI_EMAC
 
 /* Read ethernet MAC address from EEPROM for DVEVM compatible boards.
index 5d29784403fec75b63ff126c92427388f165ed60..316159a2f76bd48b93ed91e407bd9fc4e7c64d40 100644 (file)
@@ -24,7 +24,6 @@
 
 extern int eth_hw_init(void);
 
-void dv_display_clk_infos(void);
 int dvevm_read_mac_address(uint8_t *buf);
 void dv_configure_mac_address(uint8_t *rom_enetaddr);
 
index 162a5dcea81f92167c0466545bcc554d0e9340c1..8f386331e68a038886537cd48f8b6435cfd4f00a 100644 (file)
@@ -69,8 +69,6 @@ int misc_init_r(void)
        uint8_t video_mode;
        uint8_t eeprom_enetaddr[6];
 
-       dv_display_clk_infos();
-
        /* Read Ethernet MAC address from EEPROM if available. */
        if (dvevm_read_mac_address(eeprom_enetaddr))
                dv_configure_mac_address(eeprom_enetaddr);
index d6dfef58174eb6a7a0a48133da08378eeea4060d..6e0f59133599326f8ad7598d60b21f317d073b87 100644 (file)
@@ -104,8 +104,6 @@ int misc_init_r(void)
                        0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35
                };
 
-       dv_display_clk_infos();
-
        /* Set serial number from UID chip */
        if (i2c_read(CONFIG_SYS_UID_ADDR, 0, 1, buf, 8)) {
                printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR);
index 7d855fb8360f31194ccf88820e3df22de23b3e00..7f4ee361bb663f375c2e5b76da639d86beeb60e4 100644 (file)
@@ -131,8 +131,6 @@ int misc_init_r(void)
        /* EMIF-A CS3 configuration for FPGA. */
        REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL;
 
-       dv_display_clk_infos();
-
        /* Configure I2C switch (PCA9543) to enable channel 0. */
        i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0;
        if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0,
index 155fb549c04e1274a104c4c613de70ba94f12303..a0bea05177c3b6f7da252045f3a9d4d822679203 100644 (file)
@@ -66,8 +66,6 @@ int misc_init_r(void)
 {
        uint8_t eeprom_enetaddr[6];
 
-       dv_display_clk_infos();
-
        /* Read Ethernet MAC address from EEPROM if available. */
        if (dvevm_read_mac_address(eeprom_enetaddr))
                dv_configure_mac_address(eeprom_enetaddr);
index 480f19f557a4b3ec671ace8cb39fffe6bc0ffb7d..6eaa89c614a21da0d3c12a36255ff9c1d2eab2f8 100644 (file)
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB    = $(obj)lib$(SOC).a
 
-COBJS-y                                += timer.o psc.o
+COBJS-y                                += cpu.o timer.o psc.o
 COBJS-$(CONFIG_SOC_DM355)      += dm355.o
 COBJS-$(CONFIG_SOC_DM644X)     += dm644x.o
 COBJS-$(CONFIG_DRIVER_TI_EMAC) += ether.o lxt972.o dp83848.o
diff --git a/cpu/arm926ejs/davinci/cpu.c b/cpu/arm926ejs/davinci/cpu.c
new file mode 100644 (file)
index 0000000..29aead6
--- /dev/null
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2004 Texas Instruments.
+ * Copyright (C) 2009 David Brownell
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+
+/* offsets from PLL controller base */
+#define PLLC_PLLCTL    0x100
+#define PLLC_PLLM      0x110
+#define PLLC_PREDIV    0x114
+#define PLLC_PLLDIV1   0x118
+#define PLLC_PLLDIV2   0x11c
+#define PLLC_PLLDIV3   0x120
+#define PLLC_POSTDIV   0x128
+#define PLLC_BPDIV     0x12c
+#define PLLC_PLLDIV4   0x160
+#define PLLC_PLLDIV5   0x164
+#define PLLC_PLLDIV6   0x168
+#define PLLC_PLLDIV8   0x170
+#define PLLC_PLLDIV9   0x174
+
+#define BIT(x)         (1 << (x))
+
+/* SOC-specific pll info */
+#ifdef CONFIG_SOC_DM355
+#define ARM_PLLDIV     PLLC_PLLDIV1
+#define DDR_PLLDIV     PLLC_PLLDIV1
+#endif
+
+#ifdef CONFIG_SOC_DM644X
+#define ARM_PLLDIV     PLLC_PLLDIV2
+#define DSP_PLLDIV     PLLC_PLLDIV1
+#define DDR_PLLDIV     PLLC_PLLDIV2
+#endif
+
+#ifdef CONFIG_SOC_DM6447
+#define ARM_PLLDIV     PLLC_PLLDIV2
+#define DSP_PLLDIV     PLLC_PLLDIV1
+#define DDR_PLLDIV     PLLC_PLLDIV1
+#endif
+
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+
+static unsigned pll_div(volatile void *pllbase, unsigned offset)
+{
+       u32     div;
+
+       div = REG(pllbase + offset);
+       return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
+}
+
+static inline unsigned pll_prediv(volatile void *pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+       /* this register read seems to fail on pll0 */
+       if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
+               return 8;
+       else
+               return pll_div(pllbase, PLLC_PREDIV);
+#endif
+       return 1;
+}
+
+static inline unsigned pll_postdiv(volatile void *pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+       return pll_div(pllbase, PLLC_POSTDIV);
+#elif defined(CONFIG_SOC_DM6446)
+       if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
+               return pll_div(pllbase, PLLC_POSTDIV);
+#endif
+       return 1;
+}
+
+static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
+{
+       volatile void   *pllbase = (volatile void *) pll_addr;
+       unsigned        base = CONFIG_SYS_HZ_CLOCK / 1000;
+
+       /* the PLL might be bypassed */
+       if (REG(pllbase + PLLC_PLLCTL) & BIT(0)) {
+               base /= pll_prediv(pllbase);
+               base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff);
+               base /= pll_postdiv(pllbase);
+       }
+       return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div));
+}
+
+int print_cpuinfo(void)
+{
+       /* REVISIT fetch and display CPU ID and revision information
+        * too ... that will matter as more revisions appear.
+        */
+       printf("Cores: ARM %d MHz",
+                       pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV));
+
+#ifdef DSP_PLLDIV
+       printf(", DSP %d MHz",
+                       pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV));
+#endif
+
+       printf("\nDDR:   %d MHz\n",
+                       /* DDR PHY uses an x2 input clock */
+                       pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, DDR_PLLDIV)
+                               / 2);
+       return 0;
+}
+
+#endif
+
index a28cfb4ae094a1c712bcec50959c5c1d4f720e65..99324e45c7e473dbfe9ef6e9be22be77e25ee3b5 100644 (file)
@@ -175,11 +175,6 @@ void davinci_errata_workarounds(void);
 
 #define PSC_SILVER_BULLET              (0x01c41a20)
 
-/* Some PLL defines */
-#define PLL1_PLLM                      (0x01c40910)
-#define PLL2_PLLM                      (0x01c40d10)
-#define PLL2_DIV2                      (0x01c40d1c)
-
 /* Miscellania... */
 #define VBPR                           (0x20000020)
 
index 9be10f76cfa99a1b09c430a202d8055bf1f0edc3..e936ba87be15b6d107dfdd2e0c423032a65bd645 100644 (file)
@@ -52,6 +52,7 @@
 #define DV_EVM
 #define CONFIG_SYS_NAND_SMALLPAGE
 #define CONFIG_SYS_USE_NOR
+#define CONFIG_DISPLAY_CPUINFO
 /*===================*/
 /* SoC Configuration */
 /*===================*/
index d5e77f8e17beecdcebb577ec7889d1e779add81f..6612cb3cbb1d95a0a872b4579aaf625b513cde20 100644 (file)
@@ -27,6 +27,7 @@
 #define SCHMOOGIE
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_USE_NAND
+#define CONFIG_DISPLAY_CPUINFO
 /*===================*/
 /* SoC Configuration */
 /*===================*/
index 4be5b7e48838cc2986a5300d7c24fe78e6263572..6c1dc117deac4eed988ef0895f82c84b116ef83b 100644 (file)
@@ -28,8 +28,8 @@
 #define SFFSDR
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_USE_NAND
-#define CONFIG_SYS_USE_DSPLINK         /* This is to prevent U-Boot from
-                                * powering ON the DSP. */
+#define CONFIG_SYS_USE_DSPLINK         /* don't power up the DSP. */
+#define CONFIG_DISPLAY_CPUINFO
 /* SoC Configuration */
 #define CONFIG_ARM926EJS                       /* arm926ejs CPU core */
 #define CONFIG_SYS_TIMERBASE           0x01c21400      /* use timer 0 */
index a6bf8259bd03abd93f9212fe7e0477974fa74638..893729c6f24be14964b0bd7273b831f5ff3ae35c 100644 (file)
@@ -52,6 +52,7 @@
 #define SONATA_BOARD
 #define CONFIG_SYS_NAND_SMALLPAGE
 #define CONFIG_SYS_USE_NOR
+#define CONFIG_DISPLAY_CPUINFO
 /*===================*/
 /* SoC Configuration */
 /*===================*/