+++ /dev/null
-# $Id: oinkmaster.conf,v 1.132 2006/02/02 12:05:08 andreas_o Exp $ #
-
-# This file is pretty big by default, but don't worry.
-# The only things required are "path" and "update_files". You must also
-# set "url" to point to the correct rules archive for your version of
-# Snort, unless you prefer to specify this on the command line.
-# The rest in here is just a few recommended defaults, and examples
-# how to use all the other optional features and give some ideas how they
-# could be used.
-
-# Remember not to let untrusted users edit Oinkmaster configuration
-# files, as things like the PATH to use during execution is defined
-# in here.
-
-
-# Use "url = <url>" to specify the location of the rules archive to
-# download. The url must begin with http://, https://, ftp://, file://
-# or scp:// and end with .tar.gz or .tgz, and the file must be a
-# gzipped tarball what contains a directory named "rules".
-# You can also point to a local directory with dir://<directory>.
-# Multiple "url = <url>" lines can be specified to grab multiple rules
-# archives from different locations.
-#
-# Note: if URL is specified on the command line, it overrides all
-# possible URLs specified in the configuration file(s).
-#
-# The location of the official Snort rules you should use depends
-# on which Snort version you run. Basically, you should go to
-# http://www.snort.org/rules/ and follow the instructions
-# there to pick the right URL for your version of Snort
-# (and remember to update the URL when upgrading Snort in the
-# future). You can of course also specify locations to third party
-# rules.
-#
-# As of March 2005, you must register on the Snort site to get access
-# to the official Snort rules. This will get you an "oinkcode".
-# You then specify the URL as
-# http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/<filename>
-# For example, if your code is 5a081649c06a277e1022e1284b and
-# you use Snort 2.4, the url to use would be (without the wrap):
-# http://www.snort.org/pub-bin/oinkmaster.cgi/
-# 5a081649c06a277e1022e1284bdc8fabda70e2a4/snortrules-snapshot-2.4.tar.gz
-# See the Oinkmaster FAQ Q1 and http://www.snort.org/rules/ for
-# more information.
-
-
-# URL examples follows. Replace <oinkcode> with the code you get on the
-# Snort site in your registered user profile.
-
-# Example for Snort 2.4
-# url = http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/snortrules-snapshot-2.4.tar.gz
-# url = http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/snortrules-snapshot-2.4.tar.gz
-
-# Example for Snort-current ("current" means cvs snapshots).
-#url = http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/snortrules-snapshot-CURRENT.tar.gz
-
-# Example for Community rules
-# url = http://www.snort.org/pub-bin/downloads.cgi/Download/comm_rules/Community-Rules.tar.gz
-
-# Example for rules from the Bleeding Snort project
-# url = http://www.bleedingsnort.com/bleeding.rules.tar.gz
-
-# If you prefer to download the rules archive from outside Oinkmaster,
-# you can then point to the file on your local filesystem by using
-# file://<filename>, for example:
-# url = file:///tmp/snortrules.tar.gz
-
-# In rare cases you may want to grab the rules directly from a
-# local directory (don't confuse this with the output directory).
-# url = dir:///etc/snort/src/rules
-
-# Example to use scp to copy the rules archive from another host.
-# Only OpenSSH is tested. See the FAQ for more information.
-# url = scp://user@somehost.example.com:/somedir/snortrules.tar.gz
-
-# If you use -u scp://... and need to specify a private ssh key (passed
-# as -i <key> to the scp command) you can specify it here or add an
-# entry in ~/.ssh/config for the Oinkmaster user as described in the
-# OpenSSH manual.
-# scp_key = /home/oinkmaster/oinkmaster_privkey
-
-
-# The PATH to use during execution. If you prefer to use external
-# binaries (i.e. use_external_bins=1, see below), tar and gzip must be
-# found, and also wget if downloading via ftp, http or https. All with
-# optional .exe suffix. If you're on Cygwin, make sure that the path
-# contains the Cygwin binaries and not the native Win32 binaries or
-# you will get problems.
-# Assume UNIX style by default:
-path = /bin:/usr/bin:/usr/local/bin
-
-# Example if running native Win32 or standalone Cygwin:
-# path = c:\oinkmaster;c:\oinkmaster\bin
-
-# Example if running standalone Cygwin and you prefer Cygwin style path:
-# path = /cygdrive/c/oinkmaster:/cygdrive/c/oinkmaster/bin
-
-
-# We normally use external binaries (wget, tar and gzip) since they're
-# already available on most systems and do a good job. If you have the
-# Perl modules Archive::Tar, IO::Zlib and LWP::UserAgent, you can use
-# those instead if you like. You can set use_external_bins below to
-# choose which method you prefer. It's set to 0 by default on Win32
-# (i.e. use Perl modules), and 1 on other systems (i.e. use external
-# binaries). The reason for that is that the required Perl modules
-# are included on Windows/ActivePerl 5.8.1+, so it's easier to use
-# those than to install the ported Unix tools. (Note that if you're
-# using scp to download the archive, external scp binary is still
-# used.)
-# use_external_bins = 0
-
-
-# Temporary directory to use. This directory must exist when starting and
-# Oinkmaster will then create a temporary sub directory in here.
-# Keep it as a #comment if you want to use the default.
-# The default will be checked for in the environment variables TMP,
-# TMPDIR or TEMPDIR, or otherwise use "/tmp" if none of them was set.
-
-# Example for UNIX.
-# tmpdir = /home/oinkmaster/tmp/
-
-# Example if running native Win32 or Cygwin.
-# tmpdir = c:\tmp
-
-# Example if running Cygwin and you prefer Cygwin style path.
-# tmpdir = /cygdrive/c/tmp
-
-
-# The umask to use during execution if you want it to be something
-# else than the current value when starting Oinkmaster.
-# This will affect the mode bits when writing new files.
-# Keep it commented out to keep your system's current umask.
-# umask = 0027
-
-
-# Files in the archive(s) matching this regular expression will be
-# checked for changes, and then updated or added if needed.
-# All other files will be ignored. You can then choose to skip
-# individual files by specifying the "skipfile" keyword below.
-# Normally you shouldn't need to change this one.
-update_files = \.rules$|\.config$|\.conf$|\.txt$|\.map$
-
-
-# Regexp of keywords that starts a Snort rule.
-# May be useful if you create your own ruletypes and want those
-# lines to be regarded as rules as well.
-# rule_actions = alert|drop|log|pass|reject|sdrop|activate|dynamic
-
-
-# If the number of rules files in the downloaded archive matching the
-# 'update_files' regexp is below min_files, or if the number
-# of rules is below min_rules, the rules are regarded as broken
-# and the update is aborted with an error message.
-# Both are set to 1 by default (i.e. the archive is only regarded as
-# broken if it's totally empty).
-# If you download from multiple URLs, the count is the total number
-# of files/rules across all archives.
-# min_files = 1
-# min_rules = 1
-
-
-# By default, a basic sanity check is performed on most paths/filenames
-# to see if they contain illegal characters that may screw things up.
-# If this check is too strict for your system (e.g. you get bogus
-# "illegal characters in filename" errors because of your local language
-# etc) and you're sure you want to disable the checks completely,
-# set use_path_checks to 0.
-# use_path_checks = 1
-
-
-# If you want Oinkmaster to send a User-Agent HTTP header string
-# other than the default one for wget/LWP, set this variable.
-# user_agent = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
-
-
-# You can include other files anywhere in here by using
-# "include <file>". <file> will be parsed just like a regular
-# oinkmaster.conf as soon as the include statement is seen, and then
-# return and continue parsing the rest of the original file. If an
-# option is redefined, it will override the previous value. You can use
-# as many "include" statements as you wish, and also include even more
-# files from included files. Example to load stuff from "/etc/foo.conf".
-# include /etc/foo.conf
-
-# Include file for provider specific includes.
-include /var/ipfire/suricata/oinkmaster-provider-includes.conf
-
-# Include file which defines the runmode of suricata.
-include /var/ipfire/suricata/oinkmaster-modify-sids.conf
-
-#######################################################################
-# Files to totally skip (i.e. never update or check for changes) #
-# #
-# Syntax: skipfile filename #
-# or: skipfile filename1, filename2, filename3, ... #
-#######################################################################
-
-# Ignore local.rules from the rules archive by default since we might
-# have put some local rules in our own local.rules and we don't want it
-# to get overwritten by the empty one from the archive after each
-# update.
-skipfile local.rules
-
-# The file deleted.rules contains rules that have been deleted from
-# other files, so there is usually no point in updating it.
-skipfile deleted.rules
-
-# Also skip snort.conf by default since we don't want to overwrite our
-# own snort.conf if we have it in the same directory as the rules. If
-# you have your own production copy of snort.conf in another directory,
-# it may be really nice to check for changes in this file though,
-# especially since variables are sometimes added or modified and
-# new/old files are included/excluded.
-#skipfile snort.conf
-
-# You may want to consider ignoring threshold.conf for the same reasons
-# as for snort.conf, i.e. if you customize it locally and don't want it
-# to become overwritten by the default one. It may be better to put
-# local thresholding/suppressing in some local file and still update
-# and use the official one though, in case important stuff is added to
-# it some day. We do update it by default, but it's your call.
-skipfile threshold.conf
-
-# If you update from multiple URLs at the same time you may need to
-# ignore the sid-msg.map (and generate it yourself if you need one) as
-# it's usually included in each rules tarball. See the FAQ for more info.
-# skipfile sid-msg.map
-
-
-
-##########################################################################
-# SIDs to modify after each update (only for the skilled/stupid/brave). #
-# Don't use it unless you have to. There is nothing that stops you from #
-# modifying rules in such ways that they become invalid or generally #
-# break things. You have been warned. #
-# If you just want to disable SIDs, please skip this section and have a #
-# look at the "disablesid" keyword below. #
-# #
-# You may specify multiple modifysid directives for the same SID (they #
-# will be processed in order of appearance), and you may also specify a #
-# list of SIDs on which the substitution should be applied. #
-# If the argument is in the form something.something it's regarded #
-# as a filename and the substitution will apply on all rules in that #
-# file. The wildcard ("*") can be used to apply the substitution on all #
-# rules regardless of the SID or file. Please avoid using #comments #
-# at the end of modifysid lines, they may confuse the parser in some #
-# situations. #
-# #
-# Syntax: #
-# modifysid SID "replacethis" | "withthis" #
-# or: #
-# modifysid SID1, SID2, SID3, ... "replacethis" | "withthis" #
-# or: #
-# modifysid file "replacethis" | "withthis" #
-# or: #
-# modifysid * "replacethis" | "withthis" #
-# #
-# The strings within the quotes will basically be passed to a #
-# s/replacethis/withthis/ statement in Perl, so they must be valid #
-# regular expressions. The strings are case-insensitive and only the #
-# first occurrence will be replaced. If there are multiple occurrences #
-# you want to replace, simply repeat the same modifysid line. #
-# As the strings are regular expressions, you MUST escape special #
-# characters like $ \ / ( ) | by prepending a "\" to them. #
-# #
-# If you specify a modifysid statement for a multi-line rule, Oinkmaster #
-# will first translate the rule into a single-line version and then #
-# perform the substitution, so you don't have to care about the trailing #
-# backslashes and newlines. #
-# #
-# If you use backreference variables in the substitution expression, #
-# it's strongly recommended to specify them as ${1} instead of $1 and so #
-# on, to avoid parsing confusion with unexpected results in some #
-# situations. Note that modifysid statements will process both active #
-# and inactive (disabled) rules. #
-# #
-# You may want to check out README.templates and template-examples.conf #
-# to find how you can simplify the modifysid usage by using templates. #
-##########################################################################
-
-# Example to enable a rule (in this case SID 1325) that is disabled by
-# default, by simply replacing leading "#alert" with "alert".
-# (You should really use 'enablesid' for this though.)
-# Oinkmaster removes whitespaces next to the leading "#" so you don't
-# have to worry about that, but be careful about possible whitespace in
-# other places when writing the regexps.
-# modifysid 1325 "^#alert" | "alert"
-
-# You could also do this to enable it no matter what type of rule it is
-# (alert, log, pass, etc).
-# modifysid 1325 "^#" | ""
-
-# Example to add "tag" stuff to SID 1325.
-# modifysid 1325 "sid:1325;" | "sid:1325; tag: host, src, 300, seconds;"
-
-# Example to make SID 1378 a 'drop' rule (valid if you're running
-# Snort_inline).
-# modifysid 1378 "^alert" | "drop"
-
-# Example to replace first occurrence of $EXTERNAL_NET with $HOME_NET
-# in SID 302.
-# modifysid 302 "\$EXTERNAL_NET" | "\$HOME_NET"
-
-# You can also specify that a substitution should apply on multiple SIDs.
-# modifysid 302,429,1821 "\$EXTERNAL_NET" | "\$HOME_NET"
-
-# You can take advantage of the fact that it's regular expressions and
-# do more complex stuff. This example (for Snort_inline) adds a 'replace'
-# statement to SID 1324 that replaces "/bin/sh" with "/foo/sh".
-# modifysid 1324 "(content\s*:\s*"\/bin\/sh"\s*;)" | \
-# "${1} replace:"\/foo\/sh";"
-
-# If you for some reason would like to add a comment inside the actual
-# rules file, like the reason why you disabled this rule, you can do
-# like this (you would normally add such comments in oinkmaster.conf
-# though).
-# modifysid 1324 "(.+)" | "# 20020101: disabled this rule just for fun:\n#${1}"
-
-# Here is an example that is actually useful. Let's say you don't care
-# about incoming welchia pings (detected by SID 483 at the time of
-# writing) but you want to know when infected hosts on your network
-# scans hosts on the outside. (Remember that watching for outgoing
-# malicious packets is often just as important as watching for incoming
-# ones, especially in this case.) The rule currently looks like
-# "alert icmp $EXTERNAL_NET any -> $HOME_NET any ..."
-# but we want to switch that so it becomes
-# "alert icmp $HOME_NET any -> $EXTERNAL_NET any ...".
-# Here is how it could be done.
-# modifysid 483 \
-# "(.+) \$EXTERNAL_NET (.+) \$HOME_NET (.+)" | \
-# "${1} \$HOME_NET ${2} \$EXTERNAL_NET ${3}"
-
-# The wildcard (modifysid * ...) can be used to do all kinds of
-# interesting things. The substitution expression will be applied on all
-# matching rules. First, a silly example to replace "foo" with "bar" in
-# all rules (that have the string "foo" in them, that is.)
-# modifysid * "foo" | "bar"
-
-# If you for some reason don't want to use the stream preprocessor to
-# match established streams, you may want to replace the 'flow'
-# statement with 'flags:A+;' in all those rules.
-# modifysid * "flow:[a-z,_ ]+;" | "flags:A+;"
-
-# Example to convert all rules of classtype attempted-admin to 'drop'
-# rules (for Snort_inline only, obviously).
-# modifysid * "^alert (.*classtype\s*:\s*attempted-admin)" | "drop ${1}"
-
-# This one will append some text to the 'msg' string for all rules that
-# have the 'tag' keyword in them.
-# modifysid * "(.*msg:\s*".+?)"(\s*;.+;\s*tag:.*)" | \
-# "${1}, going to tag this baby"${2}"
-
-# There may be times when you want to replace multiple occurrences of a
-# certain keyword/string in a rule and not just the first one. To
-# replace the first two occurrences of "foo" with "bar" in SID 100,
-# simply repeat the modifysid statement:
-# modifysid 100 "foo" | "bar"
-# modifysid 100 "foo" | "bar"
-
-# Or you can even specify a SID list but repeat the same SID as many
-# times as required, like:
-# modifysid 100,100,100 "foo" | "bar"
-
-# Enable all rules in the file exploit.rules.
-# modifysid exploit.rules "^#" | ""
-
-# Enable all rules in exploit.rules, icmp-info.rules and also SID 1171.
-# modifysid exploit.rules, snmp.rules, 1171 "^#" | ""
-
-
-
-########################################################################
-# SIDs that we don't want to update. #
-# If you for some reason don't want a specific rule to be updated #
-# (e.g. you made local modifications to it and you never want to #
-# update it and don't care about changes in the official version), you #
-# can specify a "localsid" statement for it. This means that the old #
-# version of the rule (i.e. the one in the rules file on your #
-# harddrive) is always kept, regardless if the official version has #
-# been updated. Please do not use this feature unless in special #
-# cases as it's easy to end up with many signatures that aren't #
-# maintained anymore. See the FAQ for details about this and hints #
-# about better solutions regarding customization of rules. #
-# #
-# Syntax: localsid SID #
-# or: localsid SID1, SID2, SID3, ... #
-########################################################################
-
-# Example to never update SID 1325.
-# localsid 1325
-
-
-
-########################################################################
-# SIDs to enable after each update. #
-# Will simply remove all the leading '#' for a specified SID (if it's #
-# a multi-line rule, the leading '#' for all lines are removed.) #
-# These will be processed after all the modifysid and disablesid #
-# statements. Using 'enablesid' on a rule that is not disabled is a #
-# NOOP. #
-# #
-# Syntax: enablesid SID #
-# or: enablesid SID1, SID2, SID3, ... #
-########################################################################
-
-# Example to enable SID 1325.
-# enablesid 1325
-
-
-
-########################################################################
-# SIDs to comment out, i.e. disable, after each update by placing a #
-# '#' in front of the rule (if it's a multi-line rule, it will be put #
-# in front of all lines). #
-# #
-# Syntax: disablesid SID #
-# or: disablesid SID1, SID2, SID3, ... #
-########################################################################
-
-# You can specify one SID per line.
-# disablesid 1
-# disablesid 2
-# disablesid 3
-
-# And also as comma-separated lists.
-# disablesid 4,5,6
-
-# It's a good idea to also add comment about why you disable the sid:
-# disablesid 1324 # 20020101: disabled this SID just because I can