%This file is TeX source for a reference card describing GDB, the GNU debugger.
+%$Id$
%Copyright (C) 1991 Free Software Foundation, Inc.
%Permission is granted to make and distribute verbatim copies of
%this reference provided the copyright notices and permission notices
% support of free software. For general information
% contact ``info@cygnus.com''
%
+% NOTE ON INTENTIONAL OMISSIONS: This reference card includes most GDB
+% commands, but due to space constraints there are some things I chose
+% to omit. In general, not all synonyms for commands are covered.
+% The GDB-under-Emacs section omits gdb-mode functions without default
+% keybindings. GDB startup options are not described.
+%
%
\input threecol
{%
\xdef\manvers{\$Revision$}%
}
\vsize=8in
-\hyphenpenalty=5000\tolerance=2000\raggedright
+\hyphenpenalty=5000\tolerance=2000\raggedright\raggedbottom
%
-\font\bbf=cmbx10
-\font\vbbf=cmbx12
-\font\smrm=cmr6
-\font\brm=cmr10
-\font\rm=cmr8
-\font\it=cmti8
+%The Times-Roman family is used below because it is both more
+%attractive and more compact than Computer Modern. On the other hand,
+%while common, it is not Free. The commented-out font definitions
+%will be close (but may cause some column overflows) if you must use
+%the CM fonts.
+%\font\bbf=cmbx10
+\font\bbf=Times-Bold at 10pt
+%\font\vbbf=cmbx12
+\font\vbbf=Times-Bold at 12pt
+%\font\smrm=cmr5
+\font\smrm=Times-Roman at 6pt
+%\font\brm=cmr10
+\font\brm=Times-Roman at 10pt
+%\font\rm=cmr7
+\font\rm=Times-Roman at 8pt
+%\font\it=cmti7
+\font\it=Times-Italic at 8pt
+% We *do* use CMtt rather than Courier because TeX and PS fonts have
+% different ideas about where ``funny'' chars go.
\font\tt=cmtt8
+% Finally, the following common-but-not-free font (Symbol) is used
+% only for the copyright symbol. Comment out the whole definition of
+% \copyright if you insist on using only Free fonts, and you'll pick
+% up the kluge in plain.tex that defines \copyright by overstriking.
+\font\sym=Symbol at 7pt
+\def\copyright{{\sym\char'323}}
\normalbaselineskip=9pt\baselineskip=9pt
%
\parindent=0pt
{\vbbf GDB QUICK REFERENCE}
\vskip 5pt
-{\smrm GDB Version 4.00---Cygnus Support 1991}
+{\smrm GDB Version 4.0---Cygnus Support 1991}
+
+\sec Essential Commands;
+gdb {\it program} \opt{{\it core}}&debug {\it program} \opt{using
+coredump {\it core}}\cr
+bt& backtrace: display program stack\cr
+b \opt{\it file\tt:}{\it function}&set breakpoint at {\it function} \opt{in \it file}\cr
+run \opt{{\it arglist}}&start your program \opt{with {\it arglist}}\cr
+p {\it expr}&display the value of an expression\cr
+c &continue running your program\cr
+n &execute next line, including function calls\cr
+s &execute until another line is reached\cr
+\endsec
\sec Starting GDB;
gdb&starts GDB, with no debugging files\cr
\endsec
\sec Stopping GDB;
-quit&Exit GDB; abbreviate as {\tt q} or {\tt EOF}\par (eg \ctl{d})\cr
-INTERRUPT&(eg \ctl{c}) terminate current command\cr
+quit&exit GDB; also {\tt q} or {\tt EOF} (eg \ctl{d})\cr
+INTERRUPT&(eg \ctl{c}) terminate current command, or send to running process\cr
\endsec
\sec Getting Help;
-help&List classes of commands\cr
-help {\it class}&One-line descriptions for commands in {\it class}\cr
-help {\it command}&Describe {\it command}\cr
+help&list classes of commands\cr
+help {\it class}&one-line descriptions for commands in {\it class}\cr
+help {\it command}&describe {\it command}\cr
\endsec
\sec Executing your Program;
run $\ldots$ <{\it inf} >{\it outf}&start program with input, output
redirected\cr
\cr
-kill&Kill running program\cr
+kill&kill running program\cr
\cr
-tty {\it dev}&Use {\it dev} as default i/o for next {\tt run}\cr
+tty {\it dev}&use {\it dev} as stdin and stdout for next {\tt run}\cr
set args {\it arglist}&specify {\it arglist} for next
{\tt run}\cr
set args&specify empty argument list\cr
\cr
show environment&show all environment variables\cr
show env {\it var}&show value of environment variable {\it var}\cr
-set env {\it var} {\it expr}&set environment variable {\it var}\cr
-delete env {\it var}&Remove {\it var} from environment\cr
+set env {\it var} {\it string}&set environment variable {\it var}\cr
+unset env {\it var}&remove {\it var} from environment\cr
\endsec
\sec Shell Commands;
-cd {\it dir}&Change working directory to {\it dir}\cr
+cd {\it dir}&change working directory to {\it dir}\cr
pwd&Print working directory\cr
-make $\ldots$&Call ``{\tt make}''\cr
-shell {\it cmd}&Execute arbitrary shell command string\cr
+make $\ldots$&call ``{\tt make}''\cr
+shell {\it cmd}&execute arbitrary shell command string\cr
\endsec
\vfill
\centerline{\smrm \copyright 1991 Free Software Foundation, Inc.\qquad Permissions on back}
\eject
\sec Breakpoints and Watchpoints;
-break \opt{\it file\tt:}{\it line}&Set breakpoint at {\it line} number \opt{in \it file}\par
+break \opt{\it file\tt:}{\it line}\par
+b \opt{\it file\tt:}{\it line}&set breakpoint at {\it line} number \opt{in \it file}\par
eg:\quad{\tt break main.c:37}\quad\cr
-break \opt{\it file\tt:}{\it fun}&Set breakpoint at {\it
-fun}() \opt{in \it file}\cr
+break \opt{\it file\tt:}{\it function}&set breakpoint at {\it
+function} \opt{in \it file}\cr
break +{\it offset}\par
-break -{\it offset}&Set break at offset from current stop\cr
-break *{\it addr}&Set breakpoint at address {\it addr}\cr
-break&Set breakpoint at next instruction\cr
-break $\ldots$ if {\it expr}&Break conditionally on nonzero {\it expr}\cr
-cond {\it bno} \opt{\it expr}&New conditional expression on breakpoint
-number {\it bno}; make unconditional if no {\it expr}\cr
-tbreak $\ldots$&Temporary break; disable when reached\cr
-rbreak {\it regex}&Break on all functions matching {\it regex}\cr
-watch {\it expr}&Set a watchpoint for expression {\it expr}\cr
-catch {\it x}&Set breakpoint at C++ handler for exception {\it x}\cr
+break -{\it offset}&set break at {\it offset} lines from current stop\cr
+break *{\it addr}&set breakpoint at address {\it addr}\cr
+break&set breakpoint at next instruction\cr
+break $\ldots$ if {\it expr}&break conditionally on nonzero {\it expr}\cr
+cond {\it n} \opt{\it expr}&new conditional expression on breakpoint
+{\it n}; make unconditional if no {\it expr}\cr
+tbreak $\ldots$&temporary break; disable when reached\cr
+rbreak {\it regex}&break on all functions matching {\it regex}\cr
+watch {\it expr}&set a watchpoint for expression {\it expr}\cr
+catch {\it x}&break at C++ handler for exception {\it x}\cr
\cr
-info break&Show defined breakpoints\cr
-info watch&Show defined watchpoints\cr
+info break&show defined breakpoints\cr
+info watch&show defined watchpoints\cr
\cr
-clear&Delete breakpoints at next instruction\cr
-clear \opt{\it file\tt:}{\it fun}&Delete breakpoints at entry to {\it fun}()\cr
-clear \opt{\it file\tt:}{\it line}&Delete breakpoints on source line \cr
-delete \opt{{\it bnos}}&Delete breakpoints numbered {\it bnos};
+clear&delete breakpoints at next instruction\cr
+clear \opt{\it file\tt:}{\it fun}&delete breakpoints at entry to {\it fun}()\cr
+clear \opt{\it file\tt:}{\it line}&delete breakpoints on source line \cr
+delete \opt{{\it n}}&delete breakpoints {\it n};
\opt{or all breakpoints}\cr
\cr
-disable \opt{{\it bnos}}&Disable breakpoints {\it bnos} \opt{or all}\cr
-enable {\it bnos}&Enable breakpoints {\it bnos} \opt{or all}\cr
-enable once {\it bnos}&Enable breakpoints; disable again when
+disable \opt{{\it n}}&disable breakpoints {\it n} \opt{or all}\cr
+enable \opt{{\it n}}&enable breakpoints {\it n} \opt{or all}\cr
+enable once \opt{{\it n}}&enable breakpoints; disable again when
reached\cr
-enable del {\it bnos}&Enable breakpoints; delete when reached\cr
+enable del \opt{{\it n}}&enable breakpoints; delete when reached\cr
\cr
-ignore {\it bno} {\it count}&Ignore breakpoint number {\it bno}, {\it count}
+ignore {\it n} {\it count}&ignore breakpoint {\it n}, {\it count}
times\cr
\cr
-commands {\it bno}\par
-\qquad {\it command list}&Execute GDB {\it command list} every time breakpoint {\it bno} is reached\cr
-end&(use only with {\tt commands}) End of {\it command list}\cr
+commands {\it n}\par
+\qquad {\it command list}&execute GDB {\it command list} every time breakpoint {\it n} is reached\cr
+end&end of {\it command list}\cr
\endsec
-\sec Signals;
-handle {\it signal} {\it act}&Specify GDB actions when {\it signal} occurs:\cr
-\quad print&Announce when signal occurs\cr
-\quad noprint&Be silent when signal occurs\cr
-\quad stop&Halt execution on signal\cr
-\quad nostop&Do not halt execution\cr
-\quad pass&Allow your program to handle signal\cr
-\quad nopass&Do not allow your program to see signal\cr
-info signal&Show table of signals and GDB action for each\cr
+\sec Program Stack;
+backtrace \opt{\it n}\par
+bt \opt{\it n}&print trace of all frames in stack; or of {\it n}
+frames---innermost if {\it n}{\tt >0}, outermost if {\it n}{\tt <0}\cr
+frame \opt{\it n}&select frame number {\it n} or frame at address {\it
+n}; if no {\it n}, display current frame\cr
+up {\it n}&select frame {\it n} frames up\cr
+down {\it n}&select frame {\it n} frames down\cr
+info frame \opt{\it addr}&describe selected frame, or frame at
+{\it addr}\cr
+info args&arguments of selected frame\cr
+info locals&local variables of selected frame\cr
+info reg \opt{\it{rn}}®ister values \opt{for reg {\it rn\/}} in selected frame\cr
+info catch&exception handlers active in selected frame\cr
\endsec
\vfill\eject
\sec Execution Control;
continue \opt{\it count}\par
-c \opt{\it count}&Continue running; if {\it count} specified, ignore
+c \opt{\it count}&continue running; if {\it count} specified, ignore
this breakpoint next {\it count} times\cr
\cr
step \opt{\it count}\par
-s \opt{\it count}&Execute until another line reached; repeat {\it count} times if
+s \opt{\it count}&execute until another line reached; repeat {\it count} times if
specified\cr
\cr
stepi \opt{\it count}\par
-si \opt{\it count}&Step by machine instructions rather than source
+si \opt{\it count}&step by machine instructions rather than source
lines\cr
\cr
next \opt{\it count}\par
-n \opt{\it count}&Execute next line, including any function calls.\cr
+n \opt{\it count}&execute next line, including any function calls\cr
\cr
nexti \opt{\it count}\par
-ni \opt{\it count}&Next machine instruction rather than source
+ni \opt{\it count}&next machine instruction rather than source
line\cr
\cr
-until \opt{\it location}&Run until next instruction (or {\it
-location}) reached\cr
-\cr
-finish&Run until selected stack frame returns\cr
-return \opt{\it expr}&Pop selected stack frame without executing,
-optionally setting return value\cr
-\cr
-signal {\it num}&Resume execution with signal {\it num} (none if {\tt 0})\cr
+until \opt{\it location}&run until next instruction (or {\it
+location})\cr
+finish&run until selected stack frame returns\cr
+return \opt{\it expr}&pop selected stack frame without executing
+\opt{setting return value}\cr
+signal {\it num}&resume execution with signal {\it s} (none if {\tt 0})\cr
jump {\it line}\par
-jump *{\it address}&Resume execution at specified {\it line} number or
+jump *{\it address}&resume execution at specified {\it line} number or
{\it address}\cr
-set var {\it expr}&Evaluate {\it expr} without displaying it; use for
+set var={\it expr}&evaluate {\it expr} without displaying it; use for
altering program variables\cr
\endsec
-\sec Debugging Targets;
-target {\it type} {\it param}&Connect to target machine, process, or file\cr
-info targets&Display available targets\cr
-attach {\it param}&Connect to another target of same type\cr
-detach&Release target from GDB control\cr
-\endsec
-
-\sec Expressions;
-{\it expr}&An expression in C or C++ (including function calls), or:\cr
-{\it addr\/}@{\it len}&An array of {\it len} elements beginning at {\it
-addr}\cr
-{\it file}::{\it nm}&A variable or function {\it nm} defined in {\it
-file}\cr
-$\tt\{${\it type}$\tt\}${\it addr}&Read memory at {\it addr} as specified
-{\it type}\cr
+\sec Display;
print \opt{\tt/{\it f}\/} {\it expr}\par
-p \opt{\tt/{\it f}\/} {\it expr}&Display the value of an expression\par
-in format {\it f}:\cr
+p \opt{\tt/{\it f}\/} {\it expr}&show value of {\it expr} according to format {\it f}:\cr
\qquad x&hexadecimal\cr
\qquad d&signed decimal\cr
\qquad u&unsigned decimal\cr
\qquad o&octal\cr
\qquad a&address, absolute and relative\cr
-\qquad c&character constant\cr
+\qquad c&character\cr
\qquad f&floating point\cr
-call \opt{\tt /{\it f}\/} {\it expr}&Like {\tt print} but does not display
+call \opt{\tt /{\it f}\/} {\it expr}&like {\tt print} but does not display
{\tt void}\cr
-\endsec
-
-\vfill\eject
-\sec Memory;
-x \opt{\tt/{\it Nuf}\/} {\it expr}&Examine memory at address {\it expr};
-optional format spec follows slash.\cr
-\quad {\it N}&Count of how many units to display;\cr
-\quad {\it u}&Unit size; one of\cr
+x \opt{\tt/{\it Nuf}\/} {\it expr}&examine memory at address {\it expr};
+optional format spec follows slash\cr
+\quad {\it N}&count of how many units to display\cr
+\quad {\it u}&unit size; one of\cr
&{\tt\qquad b}\ individual bytes\cr
&{\tt\qquad h}\ halfwords (two bytes)\cr
&{\tt\qquad w}\ words (four bytes)\cr
&{\tt\qquad g}\ giant words (eight bytes)\cr
-\quad {\it f}&Printing format. Any {\tt print} format, or\cr
-&{\tt\qquad s}\ Null-terminated string\cr
-&{\tt\qquad i}\ Machine instructions\cr
-disassem \opt{\it addr}&Display range of memory as machine
-instructions; function surrounding {\it addr} or program counter, or range between two arguments\cr
+\quad {\it f}&printing format. Any {\tt print} format, or\cr
+&{\tt\qquad s}\ null-terminated string\cr
+&{\tt\qquad i}\ machine instructions\cr
+disassemble \opt{\it addr}&display memory as machine instructions\cr
\endsec
\sec Automatic Display;
-display \opt{\tt/\it f\/} {\it expr}&Show value of {\it expr} each time
+display \opt{\tt/\it f\/} {\it expr}&show value of {\it expr} each time
program stops \opt{according to format {\it f}\/}\cr
-display&Display all enabled expressions on list\cr
-undisplay {\it dnos}&Remove number(s) {\it dnos} from list of
+display&display all enabled expressions on list\cr
+undisplay {\it n}&remove number(s) {\it n} from list of
automatically displayed expressions\cr
-disable dis {\it dnos}&Disable display for expression(s) number {\it
-dnos}\cr
-enable dis {\it dnos}&Enable display for expression(s) number {\it
-dnos}\cr
-info display&Show numbered list of expressions to display\cr
+disable display {\it n}&disable display for expression(s) number {\it
+n}\cr
+enable display {\it n}&enable display for expression(s) number {\it
+n}\cr
+info display&numbered list of display expressions\cr
\endsec
-\sec Program Stack;
-backtrace \opt{\it n}\par
-bt \opt{\it n}&Print trace of all frames in stack; or of {\it n}
-frames---innermost if {\it n}{\tt >0}, outermost if {\it n}{\tt <0}\cr
-frame \opt{\it n}&Select frame number {\it n} or frame at address {\it
-n}; if no {\it n}, display current frame\cr
-up {\it n}&Select frame {\it n} frames up\cr
-down {\it n}&Select frame {\it n} frames down\cr
-info frame \opt{\it addr}&Description of selected frame, or frame at
-{\it addr}\cr
-info args&Arguments of selected frame\cr
-info locals&Local variables of selected frame\cr
-info catch&Exception handlers active in selected frame\cr
+\vfill\eject
+
+\sec Expressions;
+{\it expr}&an expression in C or C++ (including function calls), or:\cr
+{\it addr\/}@{\it len}&an array of {\it len} elements beginning at {\it
+addr}\cr
+{\it file}::{\it nm}&a variable or function {\it nm} defined in {\it
+file}\cr
+$\tt\{${\it type}$\tt\}${\it addr}&read memory at {\it addr} as specified
+{\it type}\cr
+\$&most recent displayed value\cr
+\${\it n}&{\it n}th displayed value\cr
+\$\$&displayed value previous to \$\cr
+\$\${\it n}&{\it n}th displayed value back from \$\cr
+\$\_&last address examined with {\tt x}\cr
+\$\_\_&value at address \$\_\cr
+\${\it var}&convenience variable; assign any value\cr
+\cr
+show values \opt{{\it n}}&show last 10 values \opt{or surrounding
+\${\it n}}\cr
+show convenience&display all convenience variables\cr
\endsec
\sec Symbol Table;
-info address {\it s}&Show where symbol {\it s} is stored\cr
-info func \opt{\it regex}&Show names, types of defined functions
+info address {\it s}&show where symbol {\it s} is stored\cr
+info func \opt{\it regex}&show names, types of defined functions
(all, or matching {\it regex})\cr
-info var \opt{\it regex}&Show names, types of global variables (all,
+info var \opt{\it regex}&show names, types of global variables (all,
or matching {\it regex})\cr
-info sources&Show all sources having debugging information\cr
whatis {\it expr}\par
-ptype {\it expr}&Show data type of {\it expr} without evaluating; {\tt
+ptype {\it expr}&show data type of {\it expr} without evaluating; {\tt
ptype} gives more detail\cr
-ptype {\it type}&Describe type, struct, union, or enum\cr
+ptype {\it type}&describe type, struct, union, or enum\cr
+\endsec
+
+\sec GDB Scripts;
+source {\it script}&read, execute GDB commands from file {\it
+script}\cr
+\cr
+define {\it cmd}\par
+\qquad {\it command list}&new GDB command {\it cmd}, executes script
+defined by {\it command list} \cr
+end&end of {\it command list}\cr
+document {\it cmd}\par
+\qquad {\it help text}&new online documentation for GDB command {\it
+cmd}\cr
+end&end of {\it help text}\cr
+\endsec
+
+\sec Signals;
+handle {\it signal} {\it act}&specify GDB actions when {\it signal} occurs:\cr
+\quad print&announce when signal occurs\cr
+\quad noprint&be silent when signal occurs\cr
+\quad stop&halt execution on signal\cr
+\quad nostop&do not halt execution\cr
+\quad pass&allow your program to handle signal\cr
+\quad nopass&do not allow your program to see signal\cr
+info signals&show table of signals, GDB action for each\cr
+\endsec
+
+\sec Debugging Targets;
+target {\it type} {\it param}&connect to target machine, process, or file\cr
+help target&display available targets\cr
+attach {\it param}&connect to another process\cr
+detach&release target from GDB control\cr
\endsec
\vfill\eject
\sec Controlling GDB;
-set {\it param} {\it expr}&Set one of GDB's internal parameters,
-controlling its interaction with you\cr
-show {\it param}&Display current setting of a GDB parameter\cr
+set {\it param} {\it expr}&set one of GDB's internal parameters\cr
+show {\it param}&display current setting of a GDB parameter\cr
\xtra{\rm Parameters understood by {\tt set} and {\tt show}:}
-\quad addressp {\it on/off}&print memory addresses in stacks,
-structs\cr
-\quad array-max {\it limit}&Number of elements to display from an
-array\cr
-\quad arraypr {\it off/on}&Compact or attractive format for
-arrays\cr
-\quad caution {\it on/off}&Enable or disable cautionary queries\cr
-\quad editing {\it on/off}&Control {\tt readline} command-line editing\cr
-\quad history&({\tt h}) covers a number of options:\cr
-\quad h exp {\it off/on}&Disable or enable {\tt readline} history expansion\cr
-\quad h file {\it filename}&File for recording GDB command history\cr
-\quad h size {\it size}&Number of commands kept in history list\cr
-\quad h write {\it off/on}&Control use of external file for
-command history\cr
-\cr
-\quad pretty {\it off/on}&Compact or indented format for struct
+\quad complaints {\it limit}&number of messages on unusual symbols\cr
+\quad confirm {\it on/off}&enable or disable cautionary queries\cr
+\quad editing {\it on/off}&control {\tt readline} command-line editing\cr
+\quad height {\it lpp}&number of lines before pause in
display\cr
-\quad prompt {\it str}&Use {\it str} as GDB prompt\cr
-\quad radix {\it base}&Octal, decimal, or hex number representation\cr
-\quad screen-h {\it lpp}&Number of lines before pause in
-display\cr
-\quad screen-w {\it cpl}&Number of characters before line folded\cr
-\quad unionpr {\it on/off}&Enable or disable display of unions in
-structs\cr
-\quad verbose {\it on/off}&Control messages when loading
+\quad prompt {\it str}&use {\it str} as GDB prompt\cr
+\quad radix {\it base}&octal, decimal, or hex number representation\cr
+\quad verbose {\it on/off}&control messages when loading
symbol table\cr
-\quad vtblpr {\it off/on}&Display of C++ virtual function tables\cr
-info editing&Show last 10 commands\cr
-info editing {\it n}&Show 10 commands around number {\it n}\cr
-info editing +&Show next 10 commands\cr
+\quad width {\it cpl}&number of characters before line folded\cr
+\cr
+\quad history $\ldots$&({\tt h}) groups the following options:\cr
+\quad h exp {\it off/on}&disable or enable {\tt readline} history expansion\cr
+\quad h file {\it filename}&file for recording GDB command history\cr
+\quad h size {\it size}&number of commands kept in history list\cr
+\quad h save {\it off/on}&control use of external file for
+command history\cr
+\cr
+\quad print $\ldots$&({\tt p}) groups the following options:\cr
+\quad p address {\it on/off}&print memory addresses in stacks,
+values\cr
+\quad p array {\it off/on}&compact or attractive format for
+arrays\cr
+\quad p demangle {\it on/off}&source or internal form for C++
+symbols\cr
+\quad p asm-dem {\it on/off}&demangle C++ symbols in
+machine-instruction output\cr
+\quad p elements {\it limit}&number of elements to display from an
+array\cr
+\quad p object {\it on/off}&print C++ derived types for objects\cr
+\quad p pretty {\it off/on}&struct display: compact or indented\cr
+\quad p union {\it on/off}&enable or disable display of union members\cr
+\quad p vtbl {\it off/on}&display of C++ virtual function
+tables\cr
+\cr
+show commands&show last 10 commands\cr
+show commands {\it n}&show 10 commands around number {\it n}\cr
+show commands +&show next 10 commands\cr
\endsec
\sec Working Files;
-file {\it name}&Use {\it file} for symbols and executable\cr
-core {\it name}&Read {\it file} as coredump\cr
-exec {\it name}&Use {\it file} as executable only\cr
-symbol {\it name}&Use only symbol table from {\it file}\cr
-load {\it file} {\it addr}&Read additional symbols from {\it file},
+file {\it name}&use {\it file} for symbols and executable\cr
+core {\it name}&read {\it file} as coredump\cr
+exec {\it name}&use {\it file} as executable only\cr
+symbol {\it name}&use only symbol table from {\it file}\cr
+load {\it file}&dynamically link {\it file\/} and add its symbols\cr
+add-sym {\it file} {\it addr}&read additional symbols from {\it file},
dynamically loaded at {\it addr}\cr
-info files&Display working files and targets in use\cr
-\cr
-share \opt{\it regex}&Add symbol information for shared libraries
+info files&display working files and targets in use\cr
+path {\it dirs}&add {\it dirs} to front of path searched for
+executable and symbol files\cr
+info path&display executable and symbol file path\cr
+share \opt{\it regex}&add symbol information for shared libraries
matching {\it regex}, or all shared libraries\cr
-info share&List names of shared libraries currently loaded\cr
+info share&list names of shared libraries currently loaded\cr
\endsec
\vfill\eject
\sec Source Files;
-dir {\it name}&Add directory {\it name} to front of source path\cr
-dir&Clear source path\cr
-info dir&Show current source path\cr
+dir {\it names}&add directory {\it names} to front of source path\cr
+dir&clear source path\cr
+show dir&show current source path\cr
\cr
-list&Show next ten lines of source\cr
-list -&Show previous ten lines\cr
-list {\it lines}&Display source centered around {\it lines},
+list&show next ten lines of source\cr
+list -&show previous ten lines\cr
+list {\it lines}&display source centered around {\it lines},
specified as one of:\cr
-\quad{\opt{\it file\tt:}\it num}&Line number \opt{in named file}\cr
-\quad{\opt{\it file\tt:}\it function}&Beginning of function \opt{in
+\quad{\opt{\it file\tt:}\it num}&line number \opt{in named file}\cr
+\quad{\opt{\it file\tt:}\it function}&beginning of function \opt{in
named file}\cr
\quad{\tt +\it off}&{\it off} lines after last printed\cr
\quad{\tt -\it off}&{\it off} lines previous to last printed\cr
-\quad{\tt*\it address}&Line containing {\it address}\cr
+\quad{\tt*\it address}&line containing {\it address}\cr
list {\it f},{\it l}&from line {\it f} to line {\it l}\cr
-info line {\it num}&Show starting, ending addresses of compiled code for
+info line {\it num}&show starting, ending addresses of compiled code for
source line {\it num}\cr
-forw {\it regex}&Search following source lines for {\it regex}\cr
-rev {\it regex}&Search preceding source lines for {\it regex}\cr
+info source&show name of current source file\cr
+info sources&list all source files in use\cr
+forw {\it regex}&search following source lines for {\it regex}\cr
+rev {\it regex}&search preceding source lines for {\it regex}\cr
\endsec
\sec GDB under GNU Emacs;
-M-x gdb&Run GDB under Emacs\cr
-\ctl{h} m&Describe GDB mode\cr
-M-s&Step one line ({\tt step})\cr
-M-n&Next line ({\tt next})\cr
-M-i&Step one instruction ({\tt stepi})\cr
-\ctl{c} \ctl{f}&Finish current stack frame ({\tt finish})\cr
-M-c&Continue ({\tt cont})\cr
-M-u&Up {\it arg} frames ({\tt up})\cr
-M-d&Down {\it arg} frames ({\tt down})\cr
+M-x gdb&run GDB under Emacs\cr
+\ctl{h} m&describe GDB mode\cr
+M-s&step one line ({\tt step})\cr
+M-n&next line ({\tt next})\cr
+M-i&step one instruction ({\tt stepi})\cr
+\ctl{c} \ctl{f}&finish current stack frame ({\tt finish})\cr
+M-c&continue ({\tt cont})\cr
+M-u&up {\it arg} frames ({\tt up})\cr
+M-d&down {\it arg} frames ({\tt down})\cr
+\ctl{x} \&© number from point, insert at end\cr
\ctl{x} SPC&(in source file) set break at point\cr
\endsec
\vfill
{\smrm\parskip=6pt
\centerline{Copyright \copyright 1991 Free Software Foundation, Inc.}
-\centerline{Roland Pesch (pesch@cygnus.com), January 1991---\manvers}
+\centerline{Roland Pesch (pesch@cygnus.com), May 1991---\manvers}
+\centerline{The author assumes no responsibility for any errors on this card.}
This card may be freely distributed under the terms of the GNU
General Public License.
-Please contribute to development of this card by annotating it.
-
-No author assumes any responsibility for any errors on this card.}
+\centerline{Please contribute to development of this card by annotating it.}
+}
\end
projects / thirdparty / binutils-gdb.git / commitdiff
