update nl80211.h

diff --git a/nl80211.h b/nl80211.h
index e474f6e780cc7261731d8bb81f45361f8f858d1c..1335084b1c69ecd0331913e3fa4362cf0dbba3a5 100644 (file)
--- a/nl80211.h
+++ b/nl80211.h
@@ -548,6 +548,11 @@
  * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
  *      No Acknowledgement Policy should be applied.
  *
+ * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
+ *     independently of the userspace SME, send this event indicating
+ *     %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
+ *     %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -689,6 +694,8 @@ enum nl80211_commands {
 
        NL80211_CMD_SET_NOACK_MAP,
 
+       NL80211_CMD_CH_SWITCH_NOTIFY,
+
        /* add new commands above here */
 
        /* used to define NL80211_CMD_MAX below */
@@ -1685,6 +1692,7 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
  * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
  * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
+ * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -1708,6 +1716,7 @@ enum nl80211_sta_info {
        NL80211_STA_INFO_CONNECTED_TIME,
        NL80211_STA_INFO_STA_FLAGS,
        NL80211_STA_INFO_BEACON_LOSS,
+       NL80211_STA_INFO_T_OFFSET,
 
        /* keep last */
        __NL80211_STA_INFO_AFTER_LAST,
@@ -2142,6 +2151,9 @@ enum nl80211_mntr_flags {
  *
  * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
  *
+ * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
+ * to synchronize to for 11s default synchronization method (see 11C.12.2.2)
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2166,6 +2178,7 @@ enum nl80211_meshconf_params {
        NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
        NL80211_MESHCONF_FORWARDING,
        NL80211_MESHCONF_RSSI_THRESHOLD,
+       NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
 
        /* keep last */
        __NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -2205,6 +2218,11 @@ enum nl80211_meshconf_params {
  * complete (unsecured) mesh peering without the need of a userspace daemon.
  *
  * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
+ * vendor specific synchronization method or disable it to use the default
+ * neighbor offset synchronization
+ *
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
 enum nl80211_mesh_setup_params {
@@ -2214,6 +2232,7 @@ enum nl80211_mesh_setup_params {
        NL80211_MESH_SETUP_IE,
        NL80211_MESH_SETUP_USERSPACE_AUTH,
        NL80211_MESH_SETUP_USERSPACE_AMPE,
+       NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
 
        /* keep last */
        __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
@@ -2223,7 +2242,7 @@ enum nl80211_mesh_setup_params {
 /**
  * enum nl80211_txq_attr - TX queue parameter attributes
  * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
- * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
+ * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
  * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
  *     disabled
  * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
@@ -2236,7 +2255,7 @@ enum nl80211_mesh_setup_params {
  */
 enum nl80211_txq_attr {
        __NL80211_TXQ_ATTR_INVALID,
-       NL80211_TXQ_ATTR_QUEUE,
+       NL80211_TXQ_ATTR_AC,
        NL80211_TXQ_ATTR_TXOP,
        NL80211_TXQ_ATTR_CWMIN,
        NL80211_TXQ_ATTR_CWMAX,
@@ -2247,13 +2266,21 @@ enum nl80211_txq_attr {
        NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
 };
 
-enum nl80211_txq_q {
-       NL80211_TXQ_Q_VO,
-       NL80211_TXQ_Q_VI,
-       NL80211_TXQ_Q_BE,
-       NL80211_TXQ_Q_BK
+enum nl80211_ac {
+       NL80211_AC_VO,
+       NL80211_AC_VI,
+       NL80211_AC_BE,
+       NL80211_AC_BK,
+       NL80211_NUM_ACS
 };
 
+/* backward compat */
+#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC
+#define NL80211_TXQ_Q_VO       NL80211_AC_VO
+#define NL80211_TXQ_Q_VI       NL80211_AC_VI
+#define NL80211_TXQ_Q_BE       NL80211_AC_BE
+#define NL80211_TXQ_Q_BK       NL80211_AC_BK
+
 enum nl80211_channel_type {
        NL80211_CHAN_NO_HT,
        NL80211_CHAN_HT20,