* gdb.c++/misc.exp: Ditto. Update copyright.
* gdb.c++/cplusfuncs.exp: Ditto. Update copyright.
* gdb.base/whatis.exp: Ditto. Update copyright.
* gdb.base/scope.exp: Ditto. Update copyright.
* gdb.base/ptype.exp: Ditto. Update copyright.
* gdb.base/printcmds.exp: Ditto. Update copyright.
* gdb.base/opaque.exp: Ditto. Update copyright.
* gdb.base/list.exp: Ditto.
* gdb.base/funcargs.exp: Ditto. Update copyright.
* gdb.hp/gdb.threads-hp/usrthbasic.c: Delete.
* gdb.hp/gdb.threads-hp/usrthbasic.exp: Delete.
* gdb.hp/gdb.threads-hp/usrthcore.c: Delete.
* gdb.hp/gdb.threads-hp/usrthcore.exp: Delete.
* gdb.hp/gdb.threads-hp/usrthfork.c: Delete.
* gdb.hp/gdb.threads-hp/usrthfork.exp: Delete.
+2002-05-04 Andrew Cagney <ac131313@redhat.com>
+
+ * gdb.base/default.exp: Remove obsolete code.
+ * gdb.c++/misc.exp: Ditto. Update copyright.
+ * gdb.c++/cplusfuncs.exp: Ditto. Update copyright.
+ * gdb.base/whatis.exp: Ditto. Update copyright.
+ * gdb.base/scope.exp: Ditto. Update copyright.
+ * gdb.base/ptype.exp: Ditto. Update copyright.
+ * gdb.base/printcmds.exp: Ditto. Update copyright.
+ * gdb.base/opaque.exp: Ditto. Update copyright.
+ * gdb.base/list.exp: Ditto.
+ * gdb.base/funcargs.exp: Ditto. Update copyright.
+ * gdb.hp/gdb.threads-hp/usrthbasic.c: Delete.
+ * gdb.hp/gdb.threads-hp/usrthbasic.exp: Delete.
+ * gdb.hp/gdb.threads-hp/usrthcore.c: Delete.
+ * gdb.hp/gdb.threads-hp/usrthcore.exp: Delete.
+ * gdb.hp/gdb.threads-hp/usrthfork.c: Delete.
+ * gdb.hp/gdb.threads-hp/usrthfork.exp: Delete.
+
2002-05-02 Michael Snyder <msnyder@redhat.com>
* gdb.base/watchpoint.exp: Add xscale target.
timeout { fail "(timeout) attach" }
}
-# OBSOLETE # FIXME: attach kills the udi connection
-# OBSOLETE if { [istarget "a29k-*-udi"] } {
-# OBSOLETE gdb_exit
-# OBSOLETE gdb_start
-# OBSOLETE }
-
if ![target_info exists use_gdb_stub] {
gdb_test "break" "No default breakpoint address now." "break"
foreach i "b br bre brea" {
setup_xfail "mips-idt-*"
- # OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "backtrace" "No stack."
# ba and bac are no longer unique command prefixes. So these tests
#
foreach i "bt ba bac" {
setup_xfail "mips-idt-*"
- # OBSOLETE setup_xfail "a29k-*-udi"
gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
}
} else {
# This works on the MIPS IDT board, but confuses future tests.
if ![istarget "mips-idt-*"] then {
- # OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "continue" "The program is not being run." "continue"
- # OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
}
-# OBSOLETE # FIXME: continue kills the udi connection
-# OBSOLETE if [istarget "a29k-*-udi"] then {
-# OBSOLETE gdb_exit
-# OBSOLETE gdb_start
-# OBSOLETE }
-
#test call
gdb_test "call" "The history is empty..*" "call"
#test detach
gdb_test "detach" "" "detach"
-# OBSOLETE # FIXME: continue kills the udi connection
-# OBSOLETE if [istarget "a29k-*-udi"] then {
-# OBSOLETE gdb_exit
-# OBSOLETE gdb_start
-# OBSOLETE }
if [istarget "h8300-*-hms"] then {
gdb_exit
gdb_start
}
#test frame "f" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "f" "No stack." "frame \"f\" abbreviation"
#test frame
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "frame" "No stack." "frame"
#test fg
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "fg" "The program is not being run." "fg"
# FIXME: fg kills the udi connection
#test file
}
#test finish
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "finish" "The program is not running." "finish"
#test forward-search
# The message here comes from the regexp library, not gdb, and so can
#test info address
gdb_test "info address" "Argument required." "info address"
#test info all-registers
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "info all-registers" "The program has no registers now." "info all-registers"
#test info args
gdb_test "info args" "No frame selected." "info args"
#test info locals
gdb_test "info locals" "No frame selected." "info locals"
#test info program
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "info program" "The program being debugged is not being run." "info program"
#test info registers
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "info registers" "The program has no registers now." "info registers"
#test info stack "s" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "info s" "No stack." "info stack \"s\" abbreviation"
#test info stack
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "info stack" "No stack." "info stack"
#test info set
# FIXME -- needs to match the entire output
#test inspect
gdb_test "inspect" "The history is empty." "inspect"
#test jump
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "jump" "The program is not being run." "jump"
#test kill
gdb_test "kill" "The program is not being run." "kill"
# to deduce the filename from the exec file.
gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load"
#test next "n" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "n" "The program is not being run." "next \"n\" abbreviation"
#test next
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "next" "The program is not being run." "next"
#test nexti "ni" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation"
#test nexti
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "nexti" "The program is not being run." "nexti"
#test output
gdb_test "output" "Argument required .expression to compute.*" "output"
gdb_test "restore" "You can't do that without a process to debug\."
#test return
-# The middle case accomodated the OBSOLETE a29k, where doing the "ni"
+# The middle case accomodated the obsolete a29k, where doing the "ni"
# above causes an initial stack to be created.
gdb_test "return" "No selected frame..*" "return" "Make .* return now.*y or n. $" "y"
#test reverse-search
gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search"
#test step "s" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1"
#test step
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "step" "The program is not being run." "step #1"
#test search
gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search"
#test show
gdb_test "show" "confirm: *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename: *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save: *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size: *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize: *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements: *Limit on string chars or array elements to print is 200..*" "show"
#test stepi "si" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "si" "The program is not being run." "stepi \"si\" abbreviation"
#test stepi
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "stepi" "The program is not being run." "stepi"
#test signal
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "signal" "The program is not being run." "signal"
#test source
gdb_test "source" "source command requires pathname of file to source..*|No such file or directory.*" "source"
#test step "s" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2"
#test step
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "step" "The program is not being run." "step #2"
#test symbol-file
gdb_test "symbol-file" "" "symbol-file"
#test tty
gdb_test "tty" "Argument required .terminal name for running target process.*" "tty"
#test until "u" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "u" "The program is not running." "until \"u\" abbreviation"
#test until
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "until" "The program is not running." "until"
#test undisplay
# FIXME -- need to dump full output to detailed log
#test whatis
gdb_test "whatis" "The history is empty." "whatis"
#test where
-# OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "where" "No stack." "where"
#test x
#The case in which it prints a number is for vxgdb.
-# Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+# Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2002
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
gdb_breakpoint call0e
# Run; should stop at call0a and print actual arguments.
- # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
- # OBSOLETE # code is broken.
- # OBSOLETE setup_xfail "a29k-*-udi"
if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
gdb_run_cmd
gdb_expect {
gdb_breakpoint call1e;
# Run; should stop at call1a and print actual arguments.
- # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
- # OBSOLETE # code is broken.
- # OBSOLETE setup_xfail "a29k-*-udi"
if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
gdb_run_cmd
gdb_expect {
# Run; should stop at call2a and print actual arguments.
setup_xfail "i960-*-*" 1813
- # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
- # OBSOLETE # code is broken.
- # OBSOLETE setup_xfail "a29k-*-udi"
if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" "mips-sgi-irix5*" }
# The debug info. for "f" is not correct. It's a known bug.
if {$hp_cc_compiler} {setup_xfail hppa2.0w-*-*}
# Run; should stop at call3a and print actual arguments.
# Try dereferencing the arguments.
- # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
- # OBSOLETE # code is broken.
- # OBSOLETE setup_xfail "a29k-*-udi"
gdb_run_cmd
gdb_expect {
-re ".* call3a \\(cp=$hex \"a.*\", sp=$hex, ip=$hex, lp=$hex\\) .*$gdb_prompt $" { pass "run to call3a" }
# Run; should stop at call4a and print actual arguments.
# Try dereferencing the arguments.
- # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
- # OBSOLETE # code is broken.
- # OBSOLETE setup_xfail "a29k-*-udi"
gdb_run_cmd
gdb_expect {
-re ".* call4a \\(stp=$hex\\) .*$gdb_prompt $" {
# Run; should stop at call5a and print actual arguments.
# Try dereferencing the arguments.
- # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
- # OBSOLETE # code is broken.
- # OBSOLETE setup_xfail "a29k-*-udi"
gdb_run_cmd
gdb_expect {
-re ".* call5a \\(st=\{s1 = 101, s2 = 102\}\\) .*$gdb_prompt $" {
# Run; should stop at call6a and print actual arguments.
# Print backtrace.
- # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
- # OBSOLETE # code is broken.
- # OBSOLETE setup_xfail "a29k-*-udi"
gdb_run_cmd
gdb_expect {
-re ".*Breakpoint $decimal, call6a .*$gdb_prompt $" { pass "run to call6a" }
# Run; should stop at call7a and print actual arguments.
# Print backtrace.
- # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
- # OBSOLETE # code is broken.
- # OBSOLETE setup_xfail "a29k-*-udi"
gdb_run_cmd
gdb_expect {
-re ".*Breakpoint $decimal, call7a .*$gdb_prompt $" {
}
if ![istarget sparclet-*-*] {
- # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
- # OBSOLETE # code is broken.
- # OBSOLETE setup_xfail "a29k-*-udi"
send_gdb "backtrace 100\n"
gdb_expect_list "recursive passing of structs by value" ".*$gdb_prompt $" {
".*\[\r\n\]#0 .* hitbottom \\(\\) "
proc test_list_include_file {} {
global gdb_prompt
- # OBSOLETE setup_xfail "a29k-*-udi"
setup_xfail_format "DWARF 1"
setup_xfail_format "COFF"
gdb_test "list list0.h:1" "1\[ \t\]+/\[*\]+ An include file .*10\[ \t\]+bar \\(x\\+\\+\\);" "list line 1 in include file"
- # OBSOLETE setup_xfail "a29k-*-udi"
setup_xfail_format "DWARF 1"
setup_xfail_format "COFF"
gdb_test "list list0.h:100" "Line number 95 out of range; .*list0.h has 3\[67\] lines." "list message for lines past EOF"
# gcc appears to generate incorrect debugging information for code
# in include files, which breaks this test.
# SunPRO cc is the second case below, it's also correct.
- # OBSOLETE setup_xfail "a29k-*-udi"
gdb_test "list main" "(5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;|1\[ \t\]+#include .*10\[ \t\]+x = 0;)" "list function in source file 1"
# Ultrix gdb takes the second case below; it's also correct.
# gcc appears to generate incorrect debugging information for code
# in include files, which breaks this test.
# SunPRO cc is the second case below, it's also correct.
- # OBSOLETE setup_xfail "a29k-*-udi"
send_gdb "list list0.c:main\n"
gdb_expect {
-re "1\[ \t\]+#include .*10\[ \t\]+x = 0;\r\n$gdb_prompt $" {
}
# The i960 is a second case
- # OBSOLETE # The a29k-amd-udi is a second case
# Not sure what the point of having this function be unused is.
# AIX is legitimately removing it.
# SunPRO cc is the third case.
setup_xfail "rs6000-*-*" 1804
setup_xfail "powerpc-*-*" 1804
- # OBSOLETE setup_xfail "a29k-*-udi"
setup_xfail_format "DWARF 1"
setup_xfail_format "COFF"
send_gdb "list list0.h:foo\n"
}
# Ultrix gdb is the second case.
- # OBSOLETE # a29k-amd-udi is the third case.
send_gdb "list list1.c:bar\n"
gdb_expect {
-re "4\[ \t\]+void.*13\[ \t\]+\}\r\n$gdb_prompt $" {
}
# The i960 is a second case
- # OBSOLETE # The a29k-amd-udi is a second case
# Not sure what the point of having this function be unused is.
# AIX is legitimately removing it.
-# Copyright 1992, 1994, 1995, 1996, 1997, 1999 Free Software Foundation, Inc.
+# Copyright 1992, 1994, 1995, 1996, 1997, 1999, 2002 Free Software
+# Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
global gcc_compiled
setup_xfail "vax-*-*" "i*86-sequent-bsd*"
- # OBSOLETE setup_xfail "a29k-*-udi"
if {!$gcc_compiled} then {
setup_xfail "alpha-*-*" "mips-sgi-irix5*"
}
-# Copyright 1992, 1994, 1995, 1996, 1997, 1999, 2000
-# Free Software Foundation, Inc.
+# Copyright 1992, 1994, 1995, 1996, 1997, 1999, 2000, 2002 Free
+# Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# (Test may involve inferior malloc() calls).
set timeout 60;
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p \"a string\"" " = \"a string\""
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p \"embedded \\000 null\"" " = \"embedded \\\\0 null\""
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p \"abcd\"\[2\]" " = 99 'c'"
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p sizeof (\"abcdef\")" " = 7"
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "ptype \"foo\"" " = char \\\[4\\\]"
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p *\"foo\"" " = 102 'f'"
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "ptype *\"foo\"" " = char"
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p &*\"foo\"" " = \"foo\""
setup_xfail "*-*-*"
gdb_test "ptype &*\"foo\"" "type = char \\*"
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "p (char *)\"foo\"" " = \"foo\""
}
# (Test may involve inferior malloc() calls).
set timeout 60;
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "print {'a','b','c'}" " = \"abc\""
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test_escape_braces "print {0,1,2}" " = {0, 1, 2}"
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test_escape_braces "print {(long)0,(long)1,(long)2}" " = {0, 1, 2}"
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test_escape_braces "print {{0,1,2},{3,4,5}}" " = {{0, 1, 2}, {3, 4, 5}}"
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "print {4,5,6}\[2\]" " = 6"
- # OBSOLETE setup_xfail "a29k-*-udi" 2416
gdb_test "print *&{4,5,6}\[1\]" " = 5"
}
-# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1999, 2000
-# Free Software Foundation, Inc.
+# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1999,
+# 2000, 2002 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# merged into whatis.exp, or else maintenance will be a royal pain -kingdon
#setup_xfail "i960-*-*" 1821
#setup_xfail "mips-idt-*" "mips-sgi-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_char\n"
#gdb_expect {
# -re "type = char.*$gdb_prompt $" { pass "ptype char" }
#
#
#setup_xfail "mips-*-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_signed_char\n"
#gdb_expect {
# -re "type = signed char.*$gdb_prompt $" { pass "ptype signed char" }
#
#setup_xfail "i960-*-*" 1821
#setup_xfail "mips-idt-*" "mips-sgi-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_char_array\n"
#gdb_expect {
# -re "type = char .2..*$gdb_prompt $" { pass "ptype char array" }
#
#
#setup_xfail "mips-*-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_signed_char_array\n"
#gdb_expect {
# -re "type = (|signed )char .2..*$gdb_prompt $" { pass "ptype signed char array" }
##
#setup_xfail "i960-*-*" 1821
#setup_xfail "mips-idt-*" "mips-sgi-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_char_pointer\n"
#gdb_expect {
# -re "type = char \*.*$gdb_prompt $" { pass "ptype char pointer" }
#
#
#setup_xfail "mips-*-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
#send "ptype v_signed_char_pointer\n"
#gdb_expect {
# -re "type = (|signed )char \*.*$gdb_prompt $"
-# Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000
-# Free Software Foundation, Inc.
+# Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2002 Free
+# Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# This test will only fail if the file was compiled by gcc, but
# there's no way to check that.
- # OBSOLETE setup_xfail "a29k-*-udi" 2423
if [gdb_test "cont" "Break.* marker4.*at .*:$decimal.*" \
"continue to marker4 in scope.exp"] then { gdb_suppress_tests }
if [gdb_test "up" ".*localscopes.*" "up from marker4 in scope.exp"] {
-# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1999
-# Free Software Foundation, Inc.
+# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1999, 2002
+# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
} else {
set signed_char "signed char"
}
-# OBSOLETE setup_xfail "a29k-*-*"
if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix*" }
gdb_test "whatis v_signed_char" \
"type = $signed_char" \
-# Copyright (C) 1992, 1997, 1999, 2001 Free Software Foundation, Inc.
+# Copyright 1992, 1997, 1999, 2001, 2002 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
global dm_type_void
global dm_type_void_star
- # OBSOLETE # # These tests don't work for COFF targets; don't even try them
- # OBSOLETE # if [istarget "a29k-*-udi"] then {
- # OBSOLETE # setup_xfail "a29k-*-udi"
- # OBSOLETE # fail "skipping operator tests"
- # OBSOLETE # return
- # OBSOLETE # }
-
# operator* requires quoting so that GDB does not treat it as a regexp.
info_func "operator\\*(" "void foo::operator*($dm_type_foo_ref);"
info_func "operator%(" "void foo::operator%($dm_type_foo_ref);"
-# Copyright 1992, 1994, 1995, 1996, 1997, 1999 Free Software Foundation, Inc.
+# Copyright 1992, 1994, 1995, 1996, 1997, 1999, 2002 Free Software
+# Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# See what language gdb thinks main() is, prior to reading full symbols.
# I think this fails for COFF targets.
- # OBSOLETE setup_xfail "a29k-*-udi"
send_gdb "show language\n"
gdb_expect {
-re ".* source language is \"auto; currently c\[+\]+\".*$gdb_prompt $" {
+++ /dev/null
-/* OBSOLETE #include <stdio.h> */
-/* OBSOLETE */
-/* OBSOLETE /* #include "config.h" */ */
-/* OBSOLETE #define HAVE_PTHREAD_H */
-/* OBSOLETE #define __hpux__ */
-/* OBSOLETE #define __osf__ */
-/* OBSOLETE */
-/* OBSOLETE #ifndef HAVE_PTHREAD_H */
-/* OBSOLETE */
-/* OBSOLETE /* Don't even try to compile. In fact, cause a syntax error that we can */
-/* OBSOLETE look for as a compiler error message and know that we have no pthread */
-/* OBSOLETE support. In that case we can just suppress the test completely. */ */
-/* OBSOLETE */
-/* OBSOLETE #error "no posix threads support" */
-/* OBSOLETE */
-/* OBSOLETE #else */
-/* OBSOLETE */
-/* OBSOLETE /* OK. We have the right header. If we try to compile this and fail, then */
-/* OBSOLETE there is something wrong and the user should know about it so the testsuite */
-/* OBSOLETE should issue an ERROR result.. */ */
-/* OBSOLETE */
-/* OBSOLETE #ifdef __linux__ */
-/* OBSOLETE #define _MIT_POSIX_THREADS 1 /* Linux (or at least RedHat 4.0) needs this */ */
-/* OBSOLETE #endif */
-/* OBSOLETE */
-/* OBSOLETE #include <pthread.h> */
-/* OBSOLETE */
-/* OBSOLETE /* Under OSF 2.0 & 3.0 and HPUX 10, the second arg of pthread_create */
-/* OBSOLETE is prototyped to be just a "pthread_attr_t", while under Solaris it */
-/* OBSOLETE is a "pthread_attr_t *". Arg! */ */
-/* OBSOLETE */
-/* OBSOLETE #if defined (__osf__) || defined (__hpux__) */
-/* OBSOLETE #define PTHREAD_CREATE_ARG2(arg) arg */
-/* OBSOLETE #define PTHREAD_CREATE_NULL_ARG2 null_attr */
-/* OBSOLETE static pthread_attr_t null_attr; */
-/* OBSOLETE #else */
-/* OBSOLETE #define PTHREAD_CREATE_ARG2(arg) &arg */
-/* OBSOLETE #define PTHREAD_CREATE_NULL_ARG2 NULL */
-/* OBSOLETE #endif */
-/* OBSOLETE */
-/* OBSOLETE static int verbose = 0; */
-/* OBSOLETE */
-/* OBSOLETE static void */
-/* OBSOLETE common_routine (arg) */
-/* OBSOLETE int arg; */
-/* OBSOLETE { */
-/* OBSOLETE static int from_thread1; */
-/* OBSOLETE static int from_thread2; */
-/* OBSOLETE static int from_main; */
-/* OBSOLETE static int hits; */
-/* OBSOLETE static int full_coverage; */
-/* OBSOLETE */
-/* OBSOLETE if (verbose) printf("common_routine (%d)\n", arg); */
-/* OBSOLETE hits++; */
-/* OBSOLETE switch (arg) */
-/* OBSOLETE { */
-/* OBSOLETE case 0: */
-/* OBSOLETE from_main++; */
-/* OBSOLETE break; */
-/* OBSOLETE case 1: */
-/* OBSOLETE from_thread1++; */
-/* OBSOLETE break; */
-/* OBSOLETE case 2: */
-/* OBSOLETE from_thread2++; */
-/* OBSOLETE break; */
-/* OBSOLETE } */
-/* OBSOLETE if (from_main && from_thread1 && from_thread2) */
-/* OBSOLETE full_coverage = 1; */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE static void * */
-/* OBSOLETE thread1 (void *arg) */
-/* OBSOLETE { */
-/* OBSOLETE int i; */
-/* OBSOLETE int z = 0; */
-/* OBSOLETE */
-/* OBSOLETE if (verbose) printf ("thread1 (%0x) ; pid = %d\n", arg, getpid ()); */
-/* OBSOLETE for (i=1; i <= 10000000; i++) */
-/* OBSOLETE { */
-/* OBSOLETE if (verbose) printf("thread1 %d\n", pthread_self ()); */
-/* OBSOLETE z += i; */
-/* OBSOLETE common_routine (1); */
-/* OBSOLETE sleep(1); */
-/* OBSOLETE } */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE static void * */
-/* OBSOLETE thread2 (void * arg) */
-/* OBSOLETE { */
-/* OBSOLETE int i; */
-/* OBSOLETE int k = 0; */
-/* OBSOLETE */
-/* OBSOLETE if (verbose) printf ("thread2 (%0x) ; pid = %d\n", arg, getpid ()); */
-/* OBSOLETE for (i=1; i <= 10000000; i++) */
-/* OBSOLETE { */
-/* OBSOLETE if (verbose) printf("thread2 %d\n", pthread_self ()); */
-/* OBSOLETE k += i; */
-/* OBSOLETE common_routine (2); */
-/* OBSOLETE sleep(1); */
-/* OBSOLETE } */
-/* OBSOLETE sleep(100); */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE int */
-/* OBSOLETE foo (a, b, c) */
-/* OBSOLETE int a, b, c; */
-/* OBSOLETE { */
-/* OBSOLETE int d, e, f; */
-/* OBSOLETE */
-/* OBSOLETE if (verbose) printf("a=%d\n", a); */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE main(argc, argv) */
-/* OBSOLETE int argc; */
-/* OBSOLETE char **argv; */
-/* OBSOLETE { */
-/* OBSOLETE pthread_t tid1, tid2; */
-/* OBSOLETE int j; */
-/* OBSOLETE int t = 0; */
-/* OBSOLETE void (*xxx) (); */
-/* OBSOLETE pthread_attr_t attr; */
-/* OBSOLETE */
-/* OBSOLETE if (verbose) printf ("pid = %d\n", getpid()); */
-/* OBSOLETE */
-/* OBSOLETE foo (1, 2, 3); */
-/* OBSOLETE */
-/* OBSOLETE #ifndef __osf__ */
-/* OBSOLETE if (pthread_attr_init (&attr)) */
-/* OBSOLETE { */
-/* OBSOLETE perror ("pthread_attr_init 1"); */
-/* OBSOLETE exit (1); */
-/* OBSOLETE } */
-/* OBSOLETE #endif */
-/* OBSOLETE */
-/* OBSOLETE #ifdef PTHREAD_SCOPE_SYSTEM */
-/* OBSOLETE if (pthread_attr_setscope (&attr, PTHREAD_SCOPE_SYSTEM)) */
-/* OBSOLETE { */
-/* OBSOLETE perror ("pthread_attr_setscope 1"); */
-/* OBSOLETE exit (1); */
-/* OBSOLETE } */
-/* OBSOLETE #endif */
-/* OBSOLETE */
-/* OBSOLETE if (pthread_create (&tid1, pthread_attr_default, thread1, (void *) 0xfeedface)) */
-/* OBSOLETE { */
-/* OBSOLETE perror ("pthread_create 1"); */
-/* OBSOLETE exit (1); */
-/* OBSOLETE } */
-/* OBSOLETE if (verbose) printf ("Made thread %d\n", tid1); */
-/* OBSOLETE sleep (1); */
-/* OBSOLETE */
-/* OBSOLETE if (pthread_create (&tid2, null_attr, thread2, (void *) 0xdeadbeef)) */
-/* OBSOLETE { */
-/* OBSOLETE perror ("pthread_create 2"); */
-/* OBSOLETE exit (1); */
-/* OBSOLETE } */
-/* OBSOLETE if (verbose) printf("Made thread %d\n", tid2); */
-/* OBSOLETE */
-/* OBSOLETE sleep (1); */
-/* OBSOLETE */
-/* OBSOLETE for (j = 1; j <= 10000000; j++) */
-/* OBSOLETE { */
-/* OBSOLETE if (verbose) printf("top %d\n", pthread_self ()); */
-/* OBSOLETE common_routine (0); */
-/* OBSOLETE sleep(1); */
-/* OBSOLETE t += j; */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE exit(0); */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE #endif /* ifndef HAVE_PTHREAD_H */ */
+++ /dev/null
-# OBSOLETE # usrthbasic.exp -- Expect script to test gdb with user threads
-# OBSOLETE # Copyright (C) 1992 Free Software Foundation, Inc.
-# OBSOLETE
-# OBSOLETE # This program is free software; you can redistribute it and/or modify
-# OBSOLETE # it under the terms of the GNU General Public License as published by
-# OBSOLETE # the Free Software Foundation; either version 2 of the License, or
-# OBSOLETE # (at your option) any later version.
-# OBSOLETE #
-# OBSOLETE # This program is distributed in the hope that it will be useful,
-# OBSOLETE # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# OBSOLETE # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# OBSOLETE # GNU General Public License for more details.
-# OBSOLETE #
-# OBSOLETE # You should have received a copy of the GNU General Public License
-# OBSOLETE # along with this program; if not, write to the Free Software
-# OBSOLETE # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-# OBSOLETE
-# OBSOLETE # Please email any bugs, comments, and/or additions to this file to:
-# OBSOLETE # bug-gdb@prep.ai.mit.edu
-# OBSOLETE
-# OBSOLETE # use this to debug:
-# OBSOLETE #
-# OBSOLETE #log_user 1
-# OBSOLETE
-verbose "HP's thread tests are broken beyond repair right now."
-return 0
-# OBSOLETE
-# OBSOLETE if $tracelevel {
-# OBSOLETE strace $tracelevel
-# OBSOLETE }
-# OBSOLETE
-# OBSOLETE if { [skip_hp_tests] } { continue }
-# OBSOLETE
-# OBSOLETE if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa64-*-*"] } {
-# OBSOLETE verbose "HPUX thread test ignored for non-hppa or PA64 targets."
-# OBSOLETE return 0
-# OBSOLETE }
-# OBSOLETE
-# OBSOLETE set testfile usrthbasic
-# OBSOLETE set srcfile ${srcdir}/${subdir}/${testfile}.c
-# OBSOLETE set binfile ${srcdir}/${subdir}/${testfile}
-# OBSOLETE
-# OBSOLETE # To build the executable we need to link against the thread library.
-# OBSOLETE #
-# OBSOLETE # /opt/ansic/bin/cc -Ae +DAportable -g -o usrthbasic -lcma usrthbasic.c
-# OBSOLETE #
-# OBSOLETE ## we have trouble building it on 11.0, so we use the prebuilt
-# OBSOLETE ## executable instead.
-# OBSOLETE ##
-# OBSOLETE ##if { [gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}" executable {debug additional_flags=-Ae ldflags=-lcma}] != "" } {
-# OBSOLETE ## gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
-# OBSOLETE ##}
-# OBSOLETE
-# OBSOLETE # We don't really seem to need longer waits.
-# OBSOLETE #
-# OBSOLETE ##set oldtimeout $timeout
-# OBSOLETE ##set timeout [expr "$timeout + 0"]
-# OBSOLETE ##set oldverbose $verbose
-# OBSOLETE ##set verbose 40
-# OBSOLETE
-# OBSOLETE #=========================
-# OBSOLETE #
-# OBSOLETE # Test looking at threads.
-# OBSOLETE #
-# OBSOLETE gdb_exit
-# OBSOLETE gdb_start
-# OBSOLETE gdb_reinitialize_dir $srcdir/$subdir
-# OBSOLETE gdb_load ${binfile}
-# OBSOLETE
-# OBSOLETE gdb_test "b main" ".*Breakpoint 1.*" "b main"
-# OBSOLETE gdb_test "run" "Breakpoint 1, main.*:119.*" "run to main"
-# OBSOLETE gdb_test "b thread1" ".*Breakpoint 2.*" "b thread1"
-# OBSOLETE gdb_test "info threads" "\\* 1 system thread.*:119\[^(\]*" \
-# OBSOLETE "info threads at main"
-# OBSOLETE gdb_test "c" "Breakpoint 2, thread1.*" "continue to thread1"
-# OBSOLETE gdb_test "info threads" \
-# OBSOLETE "\\* 3 system thread.*thread1.*libcma.1.*libcma.1\[^(\]*" \
-# OBSOLETE "info threads at main"
-# OBSOLETE gdb_test "b 165" "Breakpoint 3.*165.*" "break at main counter"
-# OBSOLETE gdb_test "c" "Breakpoint 3, main.*" "continue to main counter"
-# OBSOLETE gdb_test "info threads" " 4 system thread.*\\* 1 system thread.*main.*" \
-# OBSOLETE "info threads at main counter"
-# OBSOLETE gdb_test "b 97" "Breakpoint 4.*97.*" "break at thread2 counter"
-# OBSOLETE gdb_test "b 81" "Breakpoint 5.*81.*" "break at thread1 counter"
-# OBSOLETE gdb_test "bt" "#0 main.* at \[^(\]*" "backtrace at main counter"
-# OBSOLETE
-# OBSOLETE # After switching to thread 4, the cma scheduler should schedule it next
-# OBSOLETE # and we should hit its breakpoint in thread2.
-# OBSOLETE gdb_test "thread 4" ".Switching to thread 4.*cma__dispatch.*" \
-# OBSOLETE "switch to thread 4"
-# OBSOLETE gdb_test "bt" "#0 .*thread2.*" "backtrace at thread 4"
-# OBSOLETE sleep 1
-# OBSOLETE gdb_test "c" ".*Breakpoint 4, thread2.*" "continue and get to thread 4"
-# OBSOLETE
-# OBSOLETE # After switching to thread 1, the cma scheduler should schedule it next
-# OBSOLETE # and we should hit its breakpoint (in main).
-# OBSOLETE gdb_test "thread 1" ".*Switching to thread 1.*cma__dispatch.*" \
-# OBSOLETE "switch to thread 1"
-# OBSOLETE sleep 1
-# OBSOLETE gdb_test "c" ".*Breakpoint 3, main.*usrthbasic.c:165.*" \
-# OBSOLETE "continue and get to thread 1"
-# OBSOLETE
-# OBSOLETE # Done!
-# OBSOLETE #
-# OBSOLETE gdb_exit
-# OBSOLETE
-# OBSOLETE ##set timeout $oldtimeout
-# OBSOLETE ##set verbose $oldverbose
-# OBSOLETE
-# OBSOLETE return 0
+++ /dev/null
-/* OBSOLETE #include <stdio.h> */
-/* OBSOLETE */
-/* OBSOLETE /* #include "config.h" */ */
-/* OBSOLETE #define HAVE_PTHREAD_H */
-/* OBSOLETE #define __hpux__ */
-/* OBSOLETE #define __osf__ */
-/* OBSOLETE */
-/* OBSOLETE #ifndef HAVE_PTHREAD_H */
-/* OBSOLETE */
-/* OBSOLETE /* Don't even try to compile. In fact, cause a syntax error that we can */
-/* OBSOLETE look for as a compiler error message and know that we have no pthread */
-/* OBSOLETE support. In that case we can just suppress the test completely. */ */
-/* OBSOLETE */
-/* OBSOLETE #error "no posix threads support" */
-/* OBSOLETE */
-/* OBSOLETE #else */
-/* OBSOLETE */
-/* OBSOLETE /* OK. We have the right header. If we try to compile this and fail, then */
-/* OBSOLETE there is something wrong and the user should know about it so the testsuite */
-/* OBSOLETE should issue an ERROR result.. */ */
-/* OBSOLETE */
-/* OBSOLETE #ifdef __linux__ */
-/* OBSOLETE #define _MIT_POSIX_THREADS 1 /* Linux (or at least RedHat 4.0) needs this */ */
-/* OBSOLETE #endif */
-/* OBSOLETE */
-/* OBSOLETE #include <pthread.h> */
-/* OBSOLETE */
-/* OBSOLETE /* Under OSF 2.0 & 3.0 and HPUX 10, the second arg of pthread_create */
-/* OBSOLETE is prototyped to be just a "pthread_attr_t", while under Solaris it */
-/* OBSOLETE is a "pthread_attr_t *". Arg! */ */
-/* OBSOLETE */
-/* OBSOLETE #if defined (__osf__) || defined (__hpux__) */
-/* OBSOLETE #define PTHREAD_CREATE_ARG2(arg) arg */
-/* OBSOLETE #define PTHREAD_CREATE_NULL_ARG2 null_attr */
-/* OBSOLETE static pthread_attr_t null_attr; */
-/* OBSOLETE #else */
-/* OBSOLETE #define PTHREAD_CREATE_ARG2(arg) &arg */
-/* OBSOLETE #define PTHREAD_CREATE_NULL_ARG2 NULL */
-/* OBSOLETE #endif */
-/* OBSOLETE */
-/* OBSOLETE static int verbose = 0; */
-/* OBSOLETE */
-/* OBSOLETE static void */
-/* OBSOLETE common_routine (arg) */
-/* OBSOLETE int arg; */
-/* OBSOLETE { */
-/* OBSOLETE static int from_thread1; */
-/* OBSOLETE static int from_thread2; */
-/* OBSOLETE static int from_main; */
-/* OBSOLETE static int hits; */
-/* OBSOLETE static int full_coverage; */
-/* OBSOLETE */
-/* OBSOLETE if (verbose) printf("common_routine (%d)\n", arg); */
-/* OBSOLETE hits++; */
-/* OBSOLETE switch (arg) */
-/* OBSOLETE { */
-/* OBSOLETE case 0: */
-/* OBSOLETE from_main++; */
-/* OBSOLETE break; */
-/* OBSOLETE case 1: */
-/* OBSOLETE from_thread1++; */
-/* OBSOLETE break; */
-/* OBSOLETE case 2: */
-/* OBSOLETE from_thread2++; */
-/* OBSOLETE break; */
-/* OBSOLETE } */
-/* OBSOLETE if (from_main && from_thread1 && from_thread2) */
-/* OBSOLETE full_coverage = 1; */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE static void * */
-/* OBSOLETE thread1 (void *arg) */
-/* OBSOLETE { */
-/* OBSOLETE int i; */
-/* OBSOLETE int z = 0; */
-/* OBSOLETE */
-/* OBSOLETE if (verbose) printf ("thread1 (%0x) ; pid = %d\n", arg, getpid ()); */
-/* OBSOLETE for (i=1; i <= 10000000; i++) */
-/* OBSOLETE { */
-/* OBSOLETE if (verbose) printf("thread1 %d\n", pthread_self ()); */
-/* OBSOLETE z += i; */
-/* OBSOLETE common_routine (1); */
-/* OBSOLETE sleep(1); */
-/* OBSOLETE } */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE static void * */
-/* OBSOLETE thread2 (void * arg) */
-/* OBSOLETE { */
-/* OBSOLETE int i; */
-/* OBSOLETE int k = 0; */
-/* OBSOLETE */
-/* OBSOLETE if (verbose) printf ("thread2 (%0x) ; pid = %d\n", arg, getpid ()); */
-/* OBSOLETE for (i=1; i <= 10000000; i++) */
-/* OBSOLETE { */
-/* OBSOLETE if (verbose) printf("thread2 %d\n", pthread_self ()); */
-/* OBSOLETE k += i; */
-/* OBSOLETE common_routine (2); */
-/* OBSOLETE sleep(1); */
-/* OBSOLETE } */
-/* OBSOLETE sleep(100); */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE int */
-/* OBSOLETE foo (a, b, c) */
-/* OBSOLETE int a, b, c; */
-/* OBSOLETE { */
-/* OBSOLETE int d, e, f; */
-/* OBSOLETE */
-/* OBSOLETE if (verbose) printf("a=%d\n", a); */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE main(argc, argv) */
-/* OBSOLETE int argc; */
-/* OBSOLETE char **argv; */
-/* OBSOLETE { */
-/* OBSOLETE pthread_t tid1, tid2; */
-/* OBSOLETE int j; */
-/* OBSOLETE int t = 0; */
-/* OBSOLETE void (*xxx) (); */
-/* OBSOLETE pthread_attr_t attr; */
-/* OBSOLETE */
-/* OBSOLETE if (verbose) printf ("pid = %d\n", getpid()); */
-/* OBSOLETE */
-/* OBSOLETE foo (1, 2, 3); */
-/* OBSOLETE */
-/* OBSOLETE #ifndef __osf__ */
-/* OBSOLETE if (pthread_attr_init (&attr)) */
-/* OBSOLETE { */
-/* OBSOLETE perror ("pthread_attr_init 1"); */
-/* OBSOLETE exit (1); */
-/* OBSOLETE } */
-/* OBSOLETE #endif */
-/* OBSOLETE */
-/* OBSOLETE #ifdef PTHREAD_SCOPE_SYSTEM */
-/* OBSOLETE if (pthread_attr_setscope (&attr, PTHREAD_SCOPE_SYSTEM)) */
-/* OBSOLETE { */
-/* OBSOLETE perror ("pthread_attr_setscope 1"); */
-/* OBSOLETE exit (1); */
-/* OBSOLETE } */
-/* OBSOLETE #endif */
-/* OBSOLETE */
-/* OBSOLETE if (pthread_create (&tid1, pthread_attr_default, thread1, (void *) 0xfeedface)) */
-/* OBSOLETE { */
-/* OBSOLETE perror ("pthread_create 1"); */
-/* OBSOLETE exit (1); */
-/* OBSOLETE } */
-/* OBSOLETE if (verbose) printf ("Made thread %d\n", tid1); */
-/* OBSOLETE sleep (1); */
-/* OBSOLETE */
-/* OBSOLETE if (pthread_create (&tid2, null_attr, thread2, (void *) 0xdeadbeef)) */
-/* OBSOLETE { */
-/* OBSOLETE perror ("pthread_create 2"); */
-/* OBSOLETE exit (1); */
-/* OBSOLETE } */
-/* OBSOLETE if (verbose) printf("Made thread %d\n", tid2); */
-/* OBSOLETE */
-/* OBSOLETE sleep (1); */
-/* OBSOLETE */
-/* OBSOLETE for (j = 1; j <= 10000000; j++) */
-/* OBSOLETE { */
-/* OBSOLETE if (verbose) printf("top %d\n", pthread_self ()); */
-/* OBSOLETE common_routine (0); */
-/* OBSOLETE sleep(1); */
-/* OBSOLETE t += j; */
-/* OBSOLETE if (j > 3) */
-/* OBSOLETE { */
-/* OBSOLETE int* int_p; */
-/* OBSOLETE int_p = 0; */
-/* OBSOLETE *int_p = 1; */
-/* OBSOLETE } */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE exit(0); */
-/* OBSOLETE } */
-/* OBSOLETE */
-/* OBSOLETE #endif /* ifndef HAVE_PTHREAD_H */ */
+++ /dev/null
-# OBSOLETE # usrthcore.exp -- Expect script to test gdb with user threads
-# OBSOLETE # Copyright (C) 1992 Free Software Foundation, Inc.
-# OBSOLETE
-# OBSOLETE # This program is free software; you can redistribute it and/or modify
-# OBSOLETE # it under the terms of the GNU General Public License as published by
-# OBSOLETE # the Free Software Foundation; either version 2 of the License, or
-# OBSOLETE # (at your option) any later version.
-# OBSOLETE #
-# OBSOLETE # This program is distributed in the hope that it will be useful,
-# OBSOLETE # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# OBSOLETE # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# OBSOLETE # GNU General Public License for more details.
-# OBSOLETE #
-# OBSOLETE # You should have received a copy of the GNU General Public License
-# OBSOLETE # along with this program; if not, write to the Free Software
-# OBSOLETE # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-# OBSOLETE
-# OBSOLETE # Please email any bugs, comments, and/or additions to this file to:
-# OBSOLETE # bug-gdb@prep.ai.mit.edu
-# OBSOLETE
-# OBSOLETE # use this to debug:
-# OBSOLETE #
-# OBSOLETE #log_user 1
-# OBSOLETE
-verbose "HP's thread tests are broken beyond repair right now."
-return 0
-# OBSOLETE
-# OBSOLETE if $tracelevel {
-# OBSOLETE strace $tracelevel
-# OBSOLETE }
-# OBSOLETE
-# OBSOLETE if { [skip_hp_tests] } { continue }
-# OBSOLETE
-# OBSOLETE if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa64-*-*"] } {
-# OBSOLETE verbose "HPUX thread test ignored for non-hppa or PA64 targets."
-# OBSOLETE return 0
-# OBSOLETE }
-# OBSOLETE
-# OBSOLETE set testfile usrthcore
-# OBSOLETE set srcfile ${srcdir}/${subdir}/${testfile}.c
-# OBSOLETE set binfile ${srcdir}/${subdir}/${testfile}
-# OBSOLETE
-# OBSOLETE # To build the executable we need to link against the thread library.
-# OBSOLETE #
-# OBSOLETE # /opt/ansic/bin/cc -Ae +DAportable -g -o usrthcore -lcma usrthcore.c
-# OBSOLETE #
-# OBSOLETE ## we have trouble building it on 11.0, so we use the prebuilt
-# OBSOLETE ## executable instead.
-# OBSOLETE ##
-# OBSOLETE ##if { [gdb_compile "${srcdir}/${subdir}/${testfile}.c -lcma" "${binfile}" executable {debug additional_flags=-Ae ldflags=-lcma}] != "" } {
-# OBSOLETE ## gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
-# OBSOLETE ##}
-# OBSOLETE
-# OBSOLETE #=========================
-# OBSOLETE #
-# OBSOLETE # Test looking at threads in a core file
-# OBSOLETE #
-# OBSOLETE
-# OBSOLETE remote_exec build "rm -f core"
-# OBSOLETE remote_exec build "${binfile}"
-# OBSOLETE
-# OBSOLETE gdb_exit
-# OBSOLETE gdb_start
-# OBSOLETE gdb_reinitialize_dir $srcdir/$subdir
-# OBSOLETE gdb_load ${binfile}
-# OBSOLETE gdb_test "core-file core" \
-# OBSOLETE ".*Core was generated by `usrthcore'.*in main.*usrthcore.c:170.*" \
-# OBSOLETE "load corefile"
-# OBSOLETE
-# OBSOLETE gdb_test "info thread" \
-# OBSOLETE " 4 .*cma__dispatch.*\\* 1 .*in main.*usrthcore.c:170.*" \
-# OBSOLETE "info thread on core file"
-# OBSOLETE gdb_test "bt" "#0.*in main.*usrthcore.c:170" "backtrace on active thread"
-# OBSOLETE gdb_test "thread 4" ".*Switching to thread 4.*cma__dispatch.*" \
-# OBSOLETE "switch to thread 4 (thread2 procedure)"
-# OBSOLETE gdb_test "bt" "#0.*cma__dispatch.*thread2.*usrthcore.c:99.*" \
-# OBSOLETE "Backtrace on inactive thread (thread2 procedure)"
-# OBSOLETE gdb_test "b thread1" "Breakpoint 1.*usrthcore.c, line 75.*" \
-# OBSOLETE "break on thread1"
-# OBSOLETE gdb_test "run" "Starting program.*Breakpoint 1, thread1.*usrthcore.c:75.*" \
-# OBSOLETE "run program, get to thread1 procedure"
-# OBSOLETE gdb_test "info threads" "\\* \[23\] .*thread1.* 1 .*cma__dispatch.*" \
-# OBSOLETE "info threads after running core"
-# OBSOLETE
-# OBSOLETE
-# OBSOLETE # Done!
-# OBSOLETE #
-# OBSOLETE gdb_exit
-# OBSOLETE
-# OBSOLETE remote_exec build "rm -f core"
-# OBSOLETE
-# OBSOLETE return 0
+++ /dev/null
-/* OBSOLETE #include <stdio.h> */
-/* OBSOLETE #include <pthread.h> */
-/* OBSOLETE #include <sys/types.h> */
-/* OBSOLETE */
-/* OBSOLETE int main(void){ */
-/* OBSOLETE pid_t pid; */
-/* OBSOLETE */
-/* OBSOLETE switch (pid = fork()){ */
-/* OBSOLETE case 0: */
-/* OBSOLETE printf("child\n"); */
-/* OBSOLETE break; */
-/* OBSOLETE default: */
-/* OBSOLETE printf("parent\n"); */
-/* OBSOLETE break; */
-/* OBSOLETE } */
-/* OBSOLETE return 0; */
-/* OBSOLETE } */
+++ /dev/null
-# OBSOLETE # user_th_basic.exp -- Expect script to test gdb with user threads
-# OBSOLETE # Copyright (C) 1992 Free Software Foundation, Inc.
-# OBSOLETE
-# OBSOLETE # This program is free software; you can redistribute it and/or modify
-# OBSOLETE # it under the terms of the GNU General Public License as published by
-# OBSOLETE # the Free Software Foundation; either version 2 of the License, or
-# OBSOLETE # (at your option) any later version.
-# OBSOLETE #
-# OBSOLETE # This program is distributed in the hope that it will be useful,
-# OBSOLETE # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# OBSOLETE # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# OBSOLETE # GNU General Public License for more details.
-# OBSOLETE #
-# OBSOLETE # You should have received a copy of the GNU General Public License
-# OBSOLETE # along with this program; if not, write to the Free Software
-# OBSOLETE # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-# OBSOLETE
-# OBSOLETE # Please email any bugs, comments, and/or additions to this file to:
-# OBSOLETE # bug-gdb@prep.ai.mit.edu
-# OBSOLETE
-verbose "HP's thread tests are broken beyond repair right now."
-return 0
-# OBSOLETE
-# OBSOLETE if $tracelevel {
-# OBSOLETE strace $tracelevel
-# OBSOLETE }
-# OBSOLETE
-# OBSOLETE if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa64-*-*"] } {
-# OBSOLETE verbose "HPUX thread test ignored for non-hppa or PA64 targets."
-# OBSOLETE return 0
-# OBSOLETE }
-# OBSOLETE
-# OBSOLETE set testfile usrthfork
-# OBSOLETE set srcfile ${srcdir}/${subdir}/${testfile}.c
-# OBSOLETE set binfile ${srcdir}/${subdir}/${testfile}
-# OBSOLETE
-# OBSOLETE # To build the executable we need to link against the thread library.
-# OBSOLETE #
-# OBSOLETE # /opt/ansic/bin/cc -Ae -g -o usrthfork -lcma usrthfork.c
-# OBSOLETE #
-# OBSOLETE ## we have trouble building it on 11.0, so we use the prebuilt
-# OBSOLETE ## executable instead.
-# OBSOLETE ##
-# OBSOLETE ##if { [gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}" executable {debug additional_flags=-Ae ldflags=-lcma}] != "" } {
-# OBSOLETE ## gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
-# OBSOLETE ##}
-# OBSOLETE
-# OBSOLETE #=========================
-# OBSOLETE #
-# OBSOLETE # Test looking at threads.
-# OBSOLETE #
-# OBSOLETE gdb_exit
-# OBSOLETE gdb_start
-# OBSOLETE gdb_reinitialize_dir $srcdir/$subdir
-# OBSOLETE gdb_load ${binfile}
-# OBSOLETE
-# OBSOLETE gdb_test "set follow-fork-mode parent" ".*" "set follow-fork-mode parent"
-# OBSOLETE gdb_test "b main" "Breakpoint 1.*" "b main"
-# OBSOLETE gdb_test "run" "Breakpoint 1, main.*:8.*" "run to main"
-# OBSOLETE ##gdb_test "next" \
-# OBSOLETE ## ".*New process.*Detaching after fork from process.*13.*parent.*" \
-# OBSOLETE ## "next on CMA fork"
-# OBSOLETE send_gdb "next\n"
-# OBSOLETE gdb_expect {
-# OBSOLETE -re ".*Detaching after fork from.*$gdb_prompt $" {
-# OBSOLETE pass "next on CMA fork"
-# OBSOLETE }
-# OBSOLETE -re ".*$gdb_prompt $" { fail "next on CMA fork" }
-# OBSOLETE timeout { fail "(timeout) next on CMA fork" }
-# OBSOLETE }
-# OBSOLETE exec sleep 1
-# OBSOLETE
-# OBSOLETE gdb_exit
-# OBSOLETE
-# OBSOLETE return 0
projects / thirdparty / binutils-gdb.git / commitdiff
