static int mips_map_regno (struct gdbarch *, int);
+static void mips_set_register (int regno, ULONGEST value);
+
static void mips_prepare_to_store (struct regcache *regcache);
static int mips_fetch_word (CORE_ADDR addr, unsigned int *valp);
extern struct target_ops mips_ops;
extern struct target_ops pmon_ops;
extern struct target_ops ddb_ops;
+extern struct target_ops rockhopper_ops;
\f/* *INDENT-OFF* */
/* The MIPS remote debugging interface is built on top of a simple
packet protocol. Each packet is organized as follows:
These are initialized with code in _initialize_remote_mips instead
of static initializers, to make it easier to extend the target_ops
vector later. */
-struct target_ops mips_ops, pmon_ops, ddb_ops, lsi_ops;
+struct target_ops mips_ops, pmon_ops, ddb_ops, rockhopper_ops, lsi_ops;
enum mips_monitor_type
{
MON_PMON, /* 3.0.83 [COGENT,EB,FP,NET] Algorithmics Ltd. Nov 9 1995 17:19:50 */
MON_DDB, /* 2.7.473 [DDBVR4300,EL,FP,NET] Risq Modular Systems, Thu Jun 6 09:28:40 PDT 1996 */
MON_LSI, /* 4.3.12 [EB,FP], LSI LOGIC Corp. Tue Feb 25 13:22:14 1997 */
+ MON_ROCKHOPPER,
/* Last and unused value, for sizing vectors, etc. */
MON_LAST
};
}
+/* Read P as a hex value. Return true if every character made sense,
+ storing the result in *RESULT. Leave *RESULT unchanged otherwise. */
+
+static int
+read_hex_value (const char *p, ULONGEST *result)
+{
+ ULONGEST retval;
+
+ retval = 0;
+ while (*p != 0)
+ {
+ retval <<= 4;
+ if (*p >= '0' && *p <= '9')
+ retval |= *p - '0';
+ else if (*p >= 'A' && *p <= 'F')
+ retval |= *p - 'A' + 10;
+ else if (*p >= 'a' && *p <= 'f')
+ retval |= *p - 'a' + 10;
+ else
+ return 0;
+ p++;
+ }
+ *result = retval;
+ return 1;
+}
+
+
/* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if
timed out. TIMEOUT specifies timeout value in seconds.
*/
{
int addr_size = gdbarch_addr_bit (target_gdbarch) / 8;
char myBuff[DATA_MAXLEN + 1];
+ char response_string[17];
int len;
int rpid;
char rcmd;
int rerrflg;
- unsigned long rresponse;
+ ULONGEST rresponse;
if (buff == (char *) NULL)
buff = myBuff;
if (mips_need_reply)
internal_error (__FILE__, __LINE__,
_("mips_request: Trying to send command before reply"));
- sprintf (buff, "0x0 %c 0x%s 0x%s", cmd,
- phex_nz (addr, addr_size), phex_nz (data, addr_size));
+ /* 'T' sets a register to a 64-bit value, so make sure we use
+ the right conversion function. */
+ if (cmd == 'T')
+ sprintf (buff, "0x0 %c 0x%s 0x%s", cmd,
+ phex_nz (addr, addr_size), phex_nz (data, 8));
+ else
+ sprintf (buff, "0x0 %c 0x%s 0x%s", cmd,
+ phex_nz (addr, addr_size), phex_nz (data, addr_size));
+
mips_send_packet (buff, 1);
mips_need_reply = 1;
}
len = mips_receive_packet (buff, 1, timeout);
buff[len] = '\0';
- if (sscanf (buff, "0x%x %c 0x%x 0x%lx",
- &rpid, &rcmd, &rerrflg, &rresponse) != 4
+ if (sscanf (buff, "0x%x %c 0x%x 0x%16s",
+ &rpid, &rcmd, &rerrflg, response_string) != 4
+ || !read_hex_value (response_string, &rresponse)
|| (cmd != '\0' && rcmd != cmd))
mips_error ("Bad response from remote board");
mips_exiting = 1;
- if (mips_monitor != MON_IDT)
+ if (mips_monitor != MON_IDT && mips_monitor != MON_ROCKHOPPER)
{
/* The DDB (NEC) and MiniRISC (LSI) versions of PMON exit immediately,
so we do not get a reply to this command: */
common_open (&ddb_ops, name, from_tty, MON_DDB, "NEC010>");
}
+/* Open a connection to a rockhopper board. */
+
+static void
+rockhopper_open (char *name, int from_tty)
+{
+ common_open (&rockhopper_ops, name, from_tty, MON_ROCKHOPPER, "NEC01>");
+}
+
static void
lsi_open (char *name, int from_tty)
{
return (enum target_signal) sig;
}
+/* Set the register designated by REGNO to the value designated by VALUE. */
+
+static void
+mips_set_register (int regno, ULONGEST value)
+{
+ char buf[MAX_REGISTER_SIZE];
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+
+ /* We got the number the register holds, but gdb expects to see a
+ value in the target byte ordering. */
+
+ if (mips_monitor != MON_ROCKHOPPER
+ && (regno == mips_regnum (gdbarch)->pc || regno < 32))
+ /* Some 64-bit boards have monitors that only send the bottom 32 bits.
+ In such cases we can only really debug 32-bit code properly so,
+ when reading a GPR or the PC, assume that the full 64-bit
+ value is the sign extension of the lower 32 bits. */
+ store_signed_integer (buf, register_size (gdbarch, regno), byte_order,
+ value);
+ else
+ store_unsigned_integer (buf, register_size (gdbarch, regno), byte_order,
+ value);
+
+ regcache_raw_supply (regcache, regno, buf);
+}
+
/* Wait until the remote stops, and return a wait status. */
static ptid_t
int rstatus;
int err;
char buff[DATA_MAXLEN];
- int rpc, rfp, rsp;
- char flags[20];
+ ULONGEST rpc, rfp, rsp;
+ char pc_string[17], fp_string[17], sp_string[17], flags[20];
int nfields;
int i;
/* See if we got back extended status. If so, pick out the pc, fp, sp, etc... */
- nfields = sscanf (buff, "0x%*x %*c 0x%*x 0x%*x 0x%x 0x%x 0x%x 0x%*x %s",
- &rpc, &rfp, &rsp, flags);
- if (nfields >= 3)
+ nfields = sscanf (buff, "0x%*x %*c 0x%*x 0x%*x 0x%16s 0x%16s 0x%16s 0x%*x %s",
+ pc_string, fp_string, sp_string, flags);
+ if (nfields >= 3
+ && read_hex_value (pc_string, &rpc)
+ && read_hex_value (fp_string, &rfp)
+ && read_hex_value (sp_string, &rsp))
{
struct regcache *regcache = get_current_regcache ();
struct gdbarch *gdbarch = get_regcache_arch (regcache);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- char buf[MAX_REGISTER_SIZE];
-
- store_unsigned_integer
- (buf, register_size (gdbarch, gdbarch_pc_regnum (gdbarch)),
- byte_order, rpc);
- regcache_raw_supply (regcache, gdbarch_pc_regnum (gdbarch), buf);
-
- store_unsigned_integer
- (buf, register_size (gdbarch, gdbarch_pc_regnum (gdbarch)),
- byte_order, rfp);
- regcache_raw_supply (regcache, 30, buf); /* This register they are avoiding and so it is unnamed */
-
- store_unsigned_integer
- (buf, register_size (gdbarch, gdbarch_sp_regnum (gdbarch)),
- byte_order, rsp);
- regcache_raw_supply (regcache, gdbarch_sp_regnum (gdbarch), buf);
-
- store_unsigned_integer
- (buf, register_size (gdbarch, gdbarch_deprecated_fp_regnum (gdbarch)),
- byte_order, 0);
- regcache_raw_supply (regcache,
- gdbarch_deprecated_fp_regnum (gdbarch), buf);
+
+ mips_set_register (gdbarch_pc_regnum (gdbarch), rpc);
+ mips_set_register (30, rfp);
+ mips_set_register (gdbarch_sp_regnum (gdbarch), rsp);
if (nfields == 9)
{
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- unsigned LONGEST val;
+ ULONGEST val;
int err;
if (regno == -1)
/* Unfortunately the PMON version in the Vr4300 board has been
compiled without the 64bit register access commands. This
means we cannot get hold of the full register width. */
- if (mips_monitor == MON_DDB)
- val = (unsigned) mips_request ('t', pmon_reg, 0,
- &err, mips_receive_wait, NULL);
+ if (mips_monitor == MON_DDB || mips_monitor == MON_ROCKHOPPER)
+ val = mips_request ('t', pmon_reg, 0,
+ &err, mips_receive_wait, NULL);
else
val = mips_request ('r', pmon_reg, 0,
&err, mips_receive_wait, NULL);
}
}
- {
- char buf[MAX_REGISTER_SIZE];
-
- /* We got the number the register holds, but gdb expects to see a
- value in the target byte ordering. */
- store_unsigned_integer (buf, register_size (gdbarch, regno),
- byte_order, val);
- regcache_raw_supply (regcache, regno, buf);
- }
+ mips_set_register (regno, val);
}
/* Prepare to store registers. The MIPS protocol can store individual
}
regcache_cooked_read_unsigned (regcache, regno, &val);
- mips_request ('R', mips_map_regno (gdbarch, regno), val,
+ mips_request (mips_monitor == MON_ROCKHOPPER ? 'T' : 'R',
+ mips_map_regno (gdbarch, regno),
+ val,
&err, mips_receive_wait, NULL);
if (err)
mips_error ("Can't write register %d: %s", regno, safe_strerror (errno));
mips_check_lsi_error (CORE_ADDR addr, int rerrflg)
{
struct lsi_error *err;
- char *saddr = paddress (target_gdbarch, addr);
+ const char *saddr = paddress (target_gdbarch, addr);
if (rerrflg == 0) /* no error */
return 0;
chmod (tftp_localname, stbuf.st_mode | S_IROTH);
/* Must reinitialize the board to prevent PMON from crashing. */
- mips_send_command ("initEther\r", -1);
+ if (mips_monitor != MON_ROCKHOPPER)
+ mips_send_command ("initEther\r", -1);
/* Send the load command. */
cmd = xmalloc (strlen (load_cmd_prefix) + strlen (tftp_name) + 2);
if (!pmon_check_total (bintotal))
return;
break;
+ case MON_ROCKHOPPER:
+ if (!pmon_check_total (bintotal))
+ return;
+ pmon_check_entry_address ("Entry Address = ", final);
+ break;
default:
pmon_check_entry_address ("Entry Address = ", final);
pmon_check_ack ("termination");
mips_ops.to_magic = OPS_MAGIC;
/* Copy the common fields to all four target vectors. */
- pmon_ops = ddb_ops = lsi_ops = mips_ops;
+ rockhopper_ops = pmon_ops = ddb_ops = lsi_ops = mips_ops;
/* Initialize target-specific fields in the target vectors. */
mips_ops.to_shortname = "mips";
ddb_ops.to_open = ddb_open;
ddb_ops.to_wait = mips_wait;
+ rockhopper_ops.to_shortname = "rockhopper";
+ rockhopper_ops.to_doc = ddb_ops.to_doc;
+ rockhopper_ops.to_open = rockhopper_open;
+ rockhopper_ops.to_wait = mips_wait;
+
lsi_ops.to_shortname = "lsi";
lsi_ops.to_doc = pmon_ops.to_doc;
lsi_ops.to_open = lsi_open;
add_target (&pmon_ops);
add_target (&ddb_ops);
add_target (&lsi_ops);
+ add_target (&rockhopper_ops);
add_setshow_zinteger_cmd ("timeout", no_class, &mips_receive_wait, _("\
Set timeout in seconds for remote MIPS serial I/O."), _("\
projects / thirdparty / binutils-gdb.git / commitdiff
