\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*4\.1.* in func4.*4\.2.* in func4.*" \
"tracepoint with two locations"
- setup_kfail "gdb/13392" x86_64-*-*
- gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
- "continue to marker 2"
-
+ gdb_test_multiple "continue" "continue to marker 2" {
+ -re ".*Breakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" {
+ pass "continue to marker 2"
+ }
+ -re ".*$gdb_prompt $" {
+ kfail "gdb/13392" "continue to marker 2"
+ set pf_prefix $old_pf_prefix
+ return
+ }
+ }
# tracepoint has three locations after shlib change-loc-2 is loaded.
gdb_test "info trace" \
"Num Type\[ \]+Disp Enb Address\[ \]+What.*
\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*4\.1.* in func4.*4\.2.* in func4.*4\.3.* in func4 .*" \
"tracepoint with three locations"
+ gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
+ "continue to marker 3"
+
+ # shlib is unloaded, there are still three locations, but one is pending.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*4\.1.* in func4.*4\.2.* in func4.*4\.3.* \<PENDING\>\[\t \]+set_tracepoint.*" \
+ "tracepoint with two locations (unload)"
+
gdb_test_no_output "tstop"
- setup_kfail "gdb/13392" x86_64-*-*
gdb_test "tfind" "Found trace frame 0, tracepoint 4.*" "tfind frame 0"
gdb_test "tfind" "Target failed to find requested trace frame\\..*"
set pf_prefix $old_pf_prefix
}
+# Set pending tracepoint.
+
+proc tracepoint_change_loc_2 { trace_type } {
+ global srcdir
+ global srcfile
+ global subdir
+ global pcreg
+ global binfile
+ global gdb_prompt
+ global pf_prefix
+
+ set old_pf_prefix $pf_prefix
+ set pf_prefix "$pf_prefix 2 $trace_type:"
+
+ gdb_exit
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+
+ gdb_test_multiple "${trace_type} set_tracepoint" "set pending tracepoint" {
+ -re ".*Make \(|fast \)tracepoint pending.*y or \\\[n\\\]. $" {
+ gdb_test "y" "\(Fast t|T\)racepoint.*set_tracepoint.*pending." "set pending tracepoint"
+ }
+ }
+
+ gdb_trace_setactions "set action for tracepoint" "" \
+ "collect \$$pcreg" "^$"
+
+ # tracepoint has no location information now.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*PENDING.*set_tracepoint.*" \
+ "single pending tracepoint info (without symbols)"
+
+ gdb_load ${binfile}
+ # tracepoint has one location after executable is loaded.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*func4.*" \
+ "tracepoint with one location"
+
+ set main_bp 0
+ gdb_test_multiple "break main" "set breakpoint on main" {
+ -re "Breakpoint (\[0-9\]*) at .*, line.*$gdb_prompt $" {
+ set main_bp $expect_out(1,string)
+ }
+ }
+ gdb_run_cmd
+
+ gdb_test "" \
+ ".*Breakpoint.*main.*at.*$srcfile.*" \
+ "run to main"
+ gdb_test_no_output "delete break $main_bp"
+
+ # tracepoint has two locations after shlib change-loc-1 is loaded.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*1\.1.* in func4.*1\.2.* in func4.*" \
+ "tracepoint with two locations"
+
+ gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint on marker"
+
+ # tracepoint with two locations will be downloaded and installed.
+ gdb_test_no_output "tstart"
+
+ gdb_test_multiple "continue" "continue to marker 1" {
+ -re ".*Breakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" {
+ pass "continue to marker 1"
+ }
+ -re ".*$gdb_prompt $" {
+ kfail "gdb/13392" "continue to marker 1"
+ set pf_prefix $old_pf_prefix
+ return
+ }
+ }
+
+ gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
+ "continue to marker 2"
+
+ # tracepoint has three locations after shlib change-loc-2 is loaded.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*1\.1.* in func4.*1\.2.* in func4.*1\.3.* in func4 .*" \
+ "tracepoint with three locations"
+
+ gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
+ "continue to marker 3"
+
+ # shlib is unloaded, there are still three locations, but one is pending.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*1\.1.* in func4.*1\.2.* in func4.*1\.3.* \<PENDING\>\[\t \]+set_tracepoint.*" \
+ "tracepoint with two locations (unload)"
+
+ gdb_test_no_output "tstop"
+
+ gdb_test "tfind" "Found trace frame 0, tracepoint 1.*" "tfind frame 0"
+ gdb_test "tfind" "Found trace frame 1, tracepoint 1.*" "tfind frame 1"
+ gdb_test "tfind" "Found trace frame 2, tracepoint 1.*" "tfind frame 2"
+ gdb_test "tfind" "Target failed to find requested trace frame\\..*"
+
+ set pf_prefix $old_pf_prefix
+}
tracepoint_change_loc_1 "trace"
+tracepoint_change_loc_2 "trace"
# Re-compile test case with IPA.
set libipa $objdir/../gdbserver/libinproctrace.so
}
tracepoint_change_loc_1 "ftrace"
+tracepoint_change_loc_2 "ftrace"
--- /dev/null
+# Copyright 2011 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+ strace $tracelevel
+}
+
+if {[skip_shlib_tests]} {
+ return 0
+}
+
+set testfile "pending"
+set libfile1 "pendshr1"
+set libfile2 "pendshr2"
+set executable $testfile
+set srcfile $testfile.c
+set libsrc1 $srcdir/$subdir/$libfile1.c
+set libsrc2 $srcdir/$subdir/$libfile2.c
+set binfile $objdir/$subdir/$testfile
+set lib_sl1 $objdir/$subdir/$libfile1.sl
+set lib_sl2 $objdir/$subdir/$libfile2.sl
+
+set lib_opts [gdb_target_symbol_prefix_flags]
+
+if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
+ || [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""} {
+ untested "Could not compile either $libsrc1 or $libsrc2"
+ return -1
+}
+
+set exec_opts [list debug shlib=$lib_sl1 shlib_load]
+if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != "" } {
+ untested "Failed to compile $srcfile"
+ return -1
+}
+
+clean_restart $executable
+
+gdb_load_shlibs $lib_sl1
+gdb_load_shlibs $lib_sl2
+
+if ![runto_main] {
+ fail "Can't run to main to check for trace support"
+ return -1
+}
+
+if ![gdb_target_supports_trace] {
+ unsupported "Current target does not support trace"
+ return -1;
+}
+
+# Verify pending tracepoint is resolved to running to main.
+
+proc pending_tracepoint_resolved { trace_type } {
+ global srcdir
+ global subdir
+ global binfile
+ global srcfile
+ global lib_sl1
+ global pf_prefix
+
+ set old_pf_prefix $pf_prefix
+ lappend pf_prefix "$trace_type" "resolved:"
+
+ # Start with a fresh gdb.
+ gdb_exit
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+
+ gdb_test_multiple "$trace_type set_point1" "set pending tracepoint" {
+ -re ".*Make \(fast |\)tracepoint pending.*y or \\\[n\\\]. $" {
+ gdb_test "y" "\(Fast t|T\)racepoint.*set_point1.*pending." \
+ "set pending tracepoint (without symbols)"
+ }
+ }
+
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(fast |\)tracepoint\[ \]+keep y.*PENDING.*set_point1.*" \
+ "single pending tracepoint info (without symbols)"
+
+ gdb_load ${binfile}
+
+ gdb_test "break main" "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint function"
+
+ gdb_run_cmd
+ gdb_test "" "Breakpoint 2, main.*"
+
+ # Run to main which should resolve a pending tracepoint
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(fast |\)tracepoint\[ \]+keep y.*pendfunc.*" \
+ "single tracepoint info"
+
+ set pf_prefix $old_pf_prefix
+}
+
+# Verify pending tracepoint is resolved and works as expected.
+
+proc pending_tracepoint_works { trace_type } {
+ global executable
+ global srcfile
+ global lib_sl1
+ global pf_prefix
+ global gdb_prompt
+
+ set old_pf_prefix $pf_prefix
+ lappend pf_prefix "$trace_type" "works:"
+
+ # Restart with a fresh gdb.
+ clean_restart $executable
+
+ # Test setting and querying pending tracepoints
+
+ gdb_test_multiple "$trace_type set_point1" "set pending tracepoint" {
+ -re ".*Make \(fast |\)tracepoint pending.*y or \\\[n\\\]. $" {
+ gdb_test "y" "\(Fast t|T\)racepoint.*set_point1.*pending." "set pending tracepoint"
+ }
+ }
+
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(fast |\)tracepoint\[ \]+keep y.*PENDING.*set_point1.*" \
+ "single pending tracepoint info"
+
+ # Run to main which should resolve a pending tracepoint
+ gdb_test "break main" "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint function"
+ gdb_run_cmd
+ gdb_test "" "Breakpoint 2, main.*"
+
+ gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint on marker"
+
+ gdb_test_no_output "tstart" "start trace experiment"
+
+ gdb_test_multiple "continue" "continue to marker" {
+ -re "Continuing.\r\n\r\nBreakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" {
+ pass "continue to marker"
+ }
+ -re ".*$gdb_prompt $" {
+ kfail "gdb/13392" "continue to marker"
+ set pf_prefix $old_pf_prefix
+ return
+ }
+ }
+
+ gdb_test "tstop" "\[\r\n\]+" "stop trace experiment"
+
+ gdb_test "tfind start" "#0 .*" "tfind test frame 0"
+ gdb_test "tfind" "Found trace frame 1, tracepoint 1.*" "tfind test frame 1"
+ gdb_test "tfind" "Found trace frame 2, tracepoint 1.*" "tfind test frame 2"
+ gdb_test "tfind" "Target failed to find requested trace frame..*" "tfind test frame"
+
+ set pf_prefix $old_pf_prefix
+}
+
+# Verify pending tracepoint is resolved during trace.
+
+proc pending_tracepoint_resolved_during_trace { trace_type } {
+ global executable
+ global srcfile
+ global gdb_prompt
+ global lib_sl1
+ global pf_prefix
+
+ set old_pf_prefix $pf_prefix
+ lappend pf_prefix "$trace_type" "resolved_in_trace:"
+
+ # Start with a fresh gdb.
+ clean_restart $executable
+ if ![runto_main] {
+ fail "Can't run to main"
+ set pf_prefix $old_pf_prefix
+ return -1
+ }
+
+ gdb_test_multiple "$trace_type set_point2" "set pending tracepoint on set_point2" {
+ -re ".*Make \(fast |\)tracepoint pending.*y or \\\[n\\\]. $" {
+ gdb_test "y" "\(Fast t|T\)racepoint.*set_point2.*pending." \
+ "set pending tracepoint (without symbols)"
+ }
+ }
+
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(fast |\)tracepoint\[ \]+keep y.*PENDING.*set_point2.*" \
+ "single pending tracepoint on set_point2"
+
+ gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint on marker"
+
+ gdb_test_no_output "tstart" "start trace experiment"
+
+ gdb_test "continue" "Continuing.\r\n\r\nBreakpoint.*marker.*at.*pending.c.*" \
+ "continue to marker 1"
+
+ gdb_test_multiple "continue" "continue to marker 2" {
+ -re "Continuing.\r\n\r\nBreakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" {
+ pass "continue to marker 2"
+ }
+ -re ".*$gdb_prompt $" {
+ kfail "gdb/13392" "continue to marker 2"
+ set pf_prefix $old_pf_prefix
+ return
+ }
+ }
+
+ gdb_test "tstop" "\[\r\n\]+" "stop trace experiment"
+
+ # tracepoint should be resolved.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(fast |\)tracepoint\[ \]+keep y.*pendfunc2.*" \
+ "tracepoint is resolved"
+
+ gdb_test "tfind start" "#0 .*" "tfind test frame 0"
+ gdb_test "tfind" "Target failed to find requested trace frame..*" "tfind test frame"
+
+ set pf_prefix $old_pf_prefix
+}
+
+# Verify pending tracepoint is resolved and installed during trace.
+
+proc pending_tracepoint_installed_during_trace { trace_type } {
+ global executable
+ global srcfile
+ global lib_sl1
+ global gdb_prompt
+ global pf_prefix
+ global hex
+
+ set old_pf_prefix $pf_prefix
+ lappend pf_prefix "$trace_type" "installed_in_trace:"
+
+ # Start with a fresh gdb.
+ clean_restart $executable
+ if ![runto_main] {
+ fail "Can't run to main"
+ set pf_prefix $old_pf_prefix
+ return -1
+ }
+
+ gdb_test "next" ".*"
+ gdb_test "trace main" "Tracepoint \[0-9\] at .*" "set tracepoint on main"
+
+ gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint on marker"
+
+ gdb_test_no_output "tstart" "start trace experiment"
+
+ gdb_test "continue" "Continuing.\r\n\r\nBreakpoint.*marker.*at.*${srcfile}.*" \
+ "continue to marker 1"
+
+ # Set a pending tracepoint during a tracing experiment.
+ gdb_test_multiple "$trace_type set_point2" "set pending tracepoint on set_point2" {
+ -re ".*Make \(fast |\)tracepoint pending.*y or \\\[n\\\]. $" {
+ gdb_test "y" "\(Fast t|T\)racepoint.*set_point2.*pending." \
+ "set pending tracepoint"
+ }
+ }
+
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(fast |\)tracepoint\[ \t\]+keep y.*PENDING.*set_point2.*" \
+ "single pending tracepoint on set_point2"
+
+ gdb_test_multiple "continue" "continue to marker 2" {
+ -re "Continuing.\r\n\r\nBreakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" {
+ pass "continue to marker 2"
+ }
+ -re ".*$gdb_prompt $" {
+ kfail "gdb/13392" "continue to marker 2"
+ set pf_prefix $old_pf_prefix
+ return
+ }
+ }
+
+ gdb_test "tstop" "\[\r\n\]+" "stop trace experiment"
+
+ # tracepoint should be resolved.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(fast |\)tracepoint\[ \]+keep y.*pendfunc2.*" \
+ "tracepoint is resolved"
+
+ gdb_test "tfind start" "#0 $hex in pendfunc2 .*" "tfind test frame 0"
+ gdb_test "tfind" "Target failed to find requested trace frame..*" "tfind test frame"
+
+ set pf_prefix $old_pf_prefix
+}
+
+
+# Verify pending tracepoint will no longer work if we disconnect during tracing.
+
+proc pending_tracepoint_disconnect_during_trace { trace_type } {
+ global executable
+ global srcfile
+ global lib_sl1
+ global pf_prefix
+ global gdb_prompt
+
+ set old_pf_prefix $pf_prefix
+ lappend pf_prefix "$trace_type" "disconn:"
+
+ # Start with a fresh gdb.
+ clean_restart $executable
+ if ![runto_main] {
+ fail "Can't run to main"
+ set pf_prefix $old_pf_prefix
+ return -1
+ }
+
+ gdb_test_multiple "trace pendfunc3" "set pending tracepoint on set_point2" {
+ -re ".*Make \(fast |\)tracepoint pending.*y or \\\[n\\\]. $" {
+ gdb_test "y" "\(Fast t|T\)racepoint.*pendfunc3.*pending." \
+ "set pending tracepoint on pendfun3"
+ }
+ }
+
+ gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint on marker"
+
+ gdb_test_no_output "tstart" "start trace experiment"
+
+ gdb_test "continue" "Continuing.\r\n\r\nBreakpoint.*marker.*at.*pending.c.*" \
+ "continue to marker"
+
+ set test "disconnect with pending tracepoint"
+ gdb_test_multiple "disconnect" $test {
+ -re "warning: Pending tracepoints will not be resolved while GDB is disconnected.*Trace is running but will stop on detach; detach anyway\\? \\(y or n\\) $" {
+ pass $test
+
+ set test "disconnected"
+ gdb_test_multiple "y" $test {
+ -re "$gdb_prompt $" {
+ pass "$test"
+ }
+ }
+ }
+ }
+
+ set pf_prefix $old_pf_prefix
+}
+
+
+# Verify disconnect after pending tracepoint has been resolved.
+
+proc pending_tracepoint_disconnect_after_resolved { trace_type } {
+ global executable
+ global srcfile
+ global lib_sl1
+ global gdb_prompt
+ global pf_prefix
+
+ set old_pf_prefix $pf_prefix
+ lappend pf_prefix "$trace_type" "disconn_resolved:"
+
+ # Start with a fresh gdb.
+ clean_restart $executable
+ if ![runto_main] {
+ fail "Can't run to main"
+ set pf_prefix $old_pf_prefix
+ return -1
+ }
+
+ gdb_test_multiple "trace set_point2" "set pending tracepoint on set_point2" {
+ -re ".*Make \(fast |\)tracepoint pending.*y or \\\[n\\\]. $" {
+ gdb_test "y" "\(Fast t|T\)racepoint.*set_point2.*pending." \
+ "set pending tracepoint on pendfun2"
+ }
+ }
+
+ gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint on marker"
+
+ gdb_test_no_output "tstart" "start trace experiment"
+
+ gdb_test "continue" "Continuing.\r\n\r\nBreakpoint.*marker.*at.*pending.c.*" \
+ "continue to marker 1"
+ gdb_test "continue" "Continuing.\r\n\r\nBreakpoint.*marker.*at.*pending.c.*" \
+ "continue to marker 2"
+
+ # There should be no pending tracepoint, so no warning should be emitted.
+ set test "disconnect with resolved tracepoint"
+ gdb_test_multiple "disconnect" $test {
+ -re "warning: Pending tracepoints will not be resolved while GDB is disconnected.*Trace is running but will stop on detach; detach anyway\\? \\(y or n\\) $" {
+ fail $test
+ }
+ -re "Trace is running but will stop on detach; detach anyway\\? \\(y or n\\) $" {
+ pass $test
+ }
+ }
+ set test "disconnected"
+ gdb_test_multiple "y" $test {
+ -re "$gdb_prompt $" {
+ pass "$test"
+ }
+ }
+
+ set pf_prefix $old_pf_prefix
+}
+
+# Verify action works properly in resolved tracepoint.
+
+proc pending_tracepoint_with_action_resolved { trace_type } {
+ global executable
+ global srcfile
+ global lib_sl1
+ global gdb_prompt
+ global pf_prefix
+
+ set old_pf_prefix $pf_prefix
+ lappend pf_prefix "$trace_type" "action_resolved:"
+
+ # Start with a fresh gdb.
+ clean_restart $executable
+ if ![runto_main] {
+ fail "Can't run to main"
+ set pf_prefix $old_pf_prefix
+ return -1
+ }
+
+ gdb_test_multiple "$trace_type set_point2" "set pending tracepoint on set_point2" {
+ -re ".*Make \(fast |\)tracepoint pending.*y or \\\[n\\\]. $" {
+ gdb_test "y" "\(Fast t|T\)racepoint.*set_point2.*pending." \
+ "set pending tracepoint (without symbols)"
+ }
+ }
+
+ set pcreg "pc"
+ if [is_amd64_regs_target] {
+ set pcreg "rip"
+ } elseif [is_x86_like_target] {
+ set pcreg "eip"
+ }
+
+ gdb_trace_setactions "set action for pending tracepoint" "" \
+ "collect \$$pcreg" "^$"
+
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(fast |\)tracepoint\[ \]+keep y.*PENDING.*set_point2.*" \
+ "single pending tracepoint on set_point2"
+
+ gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint on marker"
+
+ gdb_test_no_output "tstart" "start trace experiment"
+
+ gdb_test "continue" "Continuing.\r\n\r\nBreakpoint.*marker.*at.*pending.c.*" \
+ "continue to marker 1"
+
+ gdb_test_multiple "continue" "continue to marker 2" {
+ -re "Continuing.\r\n\r\nBreakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" {
+ pass "continue to marker 2"
+ }
+ -re ".*$gdb_prompt $" {
+ kfail "gdb/13392" "continue to marker 2"
+ set pf_prefix $old_pf_prefix
+ return
+ }
+ }
+
+ gdb_test "tstop" "\[\r\n\]+" "stop trace experiment"
+
+ # tracepoint should be resolved.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(fast |\)tracepoint\[ \]+keep y.*pendfunc2.*" \
+ "tracepoint is resolved"
+
+ gdb_test "tfind start" "#0 .*" "tfind test frame 0"
+ gdb_test "tdump" "Data collected at tracepoint .*, trace frame \[0-9\]:.*\\$${pcreg} = .*"
+ gdb_test "tfind" "Target failed to find requested trace frame..*" "tfind test frame"
+
+ set pf_prefix $old_pf_prefix
+}
+
+pending_tracepoint_resolved "trace"
+
+pending_tracepoint_works "trace"
+
+pending_tracepoint_resolved_during_trace "trace"
+
+pending_tracepoint_disconnect_during_trace "trace"
+
+pending_tracepoint_disconnect_after_resolved "trace"
+
+pending_tracepoint_with_action_resolved "trace"
+
+pending_tracepoint_installed_during_trace "trace"
+
+# Re-compile test case with IPA.
+set libipa $objdir/../gdbserver/libinproctrace.so
+gdb_load_shlibs $libipa
+
+lappend exec_opts "shlib=$libipa"
+
+if { [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != "" } {
+ untested "Failed to compile $srcfile"
+ return -1
+}
+
+pending_tracepoint_resolved "ftrace"
+pending_tracepoint_works "ftrace"
+pending_tracepoint_resolved_during_trace "ftrace"
+pending_tracepoint_disconnect_during_trace "ftrace"
+pending_tracepoint_disconnect_after_resolved "ftrace"
+pending_tracepoint_with_action_resolved "ftrace"
+pending_tracepoint_installed_during_trace "ftrace"
projects / thirdparty / binutils-gdb.git / commitdiff
