|| (bs->breakpoint_at->type != bp_breakpoint
&& bs->breakpoint_at->type != bp_watchpoint))
return 0;
-
- /* If bpstat_stop_status says don't print, OK, we won't. An example
- circumstance is when we single-stepped for both a watchpoint and
- for a "stepi" instruction. The bpstat says that the watchpoint
- explains the stop, but we shouldn't print because the watchpoint's
- value didn't change -- and the real reason we are stopping here
- rather than continuing to step (as the watchpoint would've had us do)
- is because of the "stepi". */
- if (!bs->print)
- return 0;
if (bs->breakpoint_at->type == bp_breakpoint)
{
if (bs->next)
return bpstat_print (bs->next);
- fprintf_filtered (stderr, "gdb internal error: in bpstat_print\n");
+ /* We reached the end of the chain without printing anything. */
return 0;
}
bs->breakpoint_at = b;
/* If the condition is false, etc., don't do the commands. */
bs->commands = NULL;
- bs->momentary = b->disposition == delete;
bs->old_val = NULL;
bs->print_it = print_it_normal;
return bs;
/* This is used when everything which needs to be printed has
already been printed. But we still want to print the frame. */
static int
-print_it_noop (bs)
+print_it_done (bs)
bpstat bs;
{
return 0;
}
+/* This is used when nothing should be printed for this bpstat entry. */
+
+static int
+print_it_noop (bs)
+ bpstat bs;
+{
+ return -1;
+}
+
/* Determine whether we stopped at a breakpoint, etc, or whether we
don't understand this stop. Result is a chain of bpstat's such that:
FRAME_ADDR frame_address;
{
register struct breakpoint *b;
- int stop = 0;
- int print = 0;
CORE_ADDR bp_addr;
#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
/* True if we've hit a breakpoint (as opposed to a watchpoint). */
ALL_BREAKPOINTS (b)
{
- int this_bp_stop;
- int this_bp_print;
-
if (b->enable == disabled)
continue;
bs = bpstat_alloc (b, bs); /* Alloc a bpstat to explain stop */
- this_bp_stop = 1;
- this_bp_print = 1;
+ bs->stop = 1;
+ bs->print = 1;
if (b->type == bp_watchpoint)
{
{
case WP_DISABLED:
/* We've already printed what needs to be printed. */
- bs->print_it = print_it_noop;
+ bs->print_it = print_it_done;
/* Stop. */
break;
case WP_VALUE_CHANGED:
break;
case WP_VALUE_NOT_CHANGED:
/* Don't stop. */
+ bs->print_it = print_it_noop;
+ bs->stop = 0;
continue;
default:
/* Can't happen. */
b->enable = disabled;
printf_filtered ("Watchpoint %d disabled.\n", b->number);
/* We've already printed what needs to be printed. */
- bs->print_it = print_it_noop;
+ bs->print_it = print_it_done;
/* Stop. */
break;
}
#endif
if (b->frame && b->frame != frame_address)
- this_bp_stop = 0;
+ bs->stop = 0;
else
{
int value_is_zero;
}
if (b->cond && value_is_zero)
{
- this_bp_stop = 0;
+ bs->stop = 0;
}
else if (b->ignore_count > 0)
{
b->ignore_count--;
- this_bp_stop = 0;
+ bs->stop = 0;
}
else
{
b->enable = disabled;
bs->commands = b->commands;
if (b->silent)
- this_bp_print = 0;
+ bs->print = 0;
if (bs->commands && STREQ ("silent", bs->commands->line))
{
bs->commands = bs->commands->next;
- this_bp_print = 0;
+ bs->print = 0;
}
}
}
- if (this_bp_stop)
- stop = 1;
- if (this_bp_print)
- print = 1;
+ /* Print nothing for this entry if we dont stop or if we dont print. */
+ if (bs->stop == 0 || bs->print == 0)
+ bs->print_it = print_it_noop;
}
bs->next = NULL; /* Terminate the chain */
bs = root_bs->next; /* Re-grab the head of the chain */
+#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
if (bs)
{
- bs->stop = stop;
- bs->print = print;
-#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
if (real_breakpoint)
{
*pc = bp_addr;
write_pc (bp_addr);
#endif /* No SHIFT_INST_REGS. */
}
-#endif /* DECR_PC_AFTER_BREAK != 0. */
}
+#endif /* DECR_PC_AFTER_BREAK != 0. */
return bs;
}
+\f
+/* Tell what to do about this bpstat. */
+enum bpstat_what
+bpstat_what (bs)
+ bpstat bs;
+{
+ /* Classify each bpstat as one of the following. */
+ enum class {
+ /* There was a watchpoint, but we're not stopping. */
+ wp_nostop = 0,
+
+ /* There was a watchpoint, stop but don't print. */
+ wp_silent,
+
+ /* There was a watchpoint, stop and print. */
+ wp_noisy,
+
+ /* There was a breakpoint but we're not stopping. */
+ bp_nostop,
+
+ /* There was a breakpoint, stop but don't print. */
+ bp_silent,
+
+ /* There was a breakpoint, stop and print. */
+ bp_noisy,
+
+ /* We hit the longjmp breakpoint. */
+ long_jump,
+
+ /* We hit the longjmp_resume breakpoint. */
+ long_resume,
+
+ /* This is just used to count how many enums there are. */
+ class_last
+ };
+
+ /* Here is the table which drives this routine. So that we can
+ format it pretty, we define some abbreviations for the
+ enum bpstat_what codes. */
+#define keep_c BPSTAT_WHAT_KEEP_CHECKING
+#define stop_s BPSTAT_WHAT_STOP_SILENT
+#define stop_n BPSTAT_WHAT_STOP_NOISY
+#define single BPSTAT_WHAT_SINGLE
+#define setlr BPSTAT_WHAT_SET_LONGJMP_RESUME
+#define clrlr BPSTAT_WHAT_CLEAR_LONGJMP_RESUME
+#define clrlrs BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE
+/* "Can't happen." Might want to print an error message.
+ abort() is not out of the question, but chances are GDB is just
+ a bit confused, not unusable. */
+#define err BPSTAT_WHAT_STOP_NOISY
+
+ /* Given an old action and a class, come up with a new action. */
+ static const enum bpstat_what
+ table[(int)class_last][(int)BPSTAT_WHAT_LAST] =
+ {
+ /* old action */
+ /* keep_c stop_s stop_n single setlr clrlr clrlrs */
+
+/*wp_nostop*/ {keep_c, stop_s, stop_n, single, setlr , clrlr , clrlrs},
+/*wp_silent*/ {stop_s, stop_s, stop_n, stop_s, stop_s, stop_s, stop_s},
+/*wp_noisy*/ {stop_n, stop_n, stop_n, stop_n, stop_n, stop_n, stop_n},
+/*bp_nostop*/ {single, stop_s, stop_n, single, setlr , clrlrs, clrlrs},
+/*bp_silent*/ {stop_s, stop_s, stop_n, stop_s, stop_s, stop_s, stop_s},
+/*bp_noisy*/ {stop_n, stop_n, stop_n, stop_n, stop_n, stop_n, stop_n},
+/*long_jump*/ {setlr , stop_s, stop_n, setlr , err , err , err },
+/*long_resume*/ {clrlr , stop_s, stop_n, clrlrs, err , err , err }
+ };
+#undef keep_c
+#undef stop_s
+#undef stop_n
+#undef single
+#undef setlr
+#undef clrlr
+#undef clrlrs
+#undef err
+ enum bpstat_what current_action = BPSTAT_WHAT_KEEP_CHECKING;
+
+ for (; bs != NULL; bs = bs->next)
+ {
+ enum class bs_class;
+ if (bs->breakpoint_at == NULL)
+ /* I suspect this can happen if it was a momentary breakpoint
+ which has since been deleted. */
+ continue;
+ switch (bs->breakpoint_at->type)
+ {
+ case bp_breakpoint:
+ case bp_until:
+ case bp_finish:
+ if (bs->stop)
+ {
+ if (bs->print)
+ bs_class = bp_noisy;
+ else
+ bs_class = bp_silent;
+ }
+ else
+ bs_class = bp_nostop;
+ break;
+ case bp_watchpoint:
+ if (bs->stop)
+ {
+ if (bs->print)
+ bs_class = wp_noisy;
+ else
+ bs_class = wp_silent;
+ }
+ else
+ bs_class = wp_nostop;
+ break;
+ case bp_longjmp:
+ bs_class = long_jump;
+ break;
+ case bp_longjmp_resume:
+ bs_class = long_resume;
+ break;
+ }
+ current_action = table[(int)bs_class][(int)current_action];
+ }
+ return current_action;
+}
/* Nonzero if we should step constantly (e.g. watchpoints on machines
without hardware support). This isn't related to a specific bpstat,
s = b->cond_string;
b->cond = parse_exp_1 (&s, (struct block *)0, 0);
}
- mention (b);
+ if (b->enable == enabled)
+ mention (b);
break;
default:
/* FIXME: prototypes uses equivalence between FRAME_ADDR and CORE_ADDR */
extern bpstat bpstat_stop_status PARAMS ((CORE_ADDR *, CORE_ADDR));
-/* Nonzero if we should print the frame. */
-#define bpstat_should_print(bs) ((bs) != NULL && (bs)->print)
+/* Return values from bpstat_what. */
+enum bpstat_what {
+ /* Perform various other tests; that is, this bpstat does not
+ say to perform any action (e.g. failed watchpoint and nothing
+ else). */
+ BPSTAT_WHAT_KEEP_CHECKING,
+
+ /* Rather than distinguish between noisy and silent stops here, it
+ might be cleaner to have bpstat_print make that decision (also
+ taking into account stop_print_frame and source_only). But the
+ implications are a bit scary (interaction with auto-displays, etc.),
+ so I won't try it. */
+
+ /* Stop silently. */
+ BPSTAT_WHAT_STOP_SILENT,
+
+ /* Stop and print. */
+ BPSTAT_WHAT_STOP_NOISY,
+
+ /* Remove breakpoints, single step once, then put them back in and
+ go back to what we were doing. */
+ BPSTAT_WHAT_SINGLE,
+
+ /* Set longjmp_resume breakpoint, remove all other breakpoints,
+ and continue. The "remove all other breakpoints" part is required
+ if we are also stepping over another breakpoint as well as doing
+ the longjmp handling. */
+ BPSTAT_WHAT_SET_LONGJMP_RESUME,
+
+ /* Clear longjmp_resume breakpoint, then handle as
+ BPSTAT_WHAT_KEEP_CHECKING. */
+ BPSTAT_WHAT_CLEAR_LONGJMP_RESUME,
+
+ /* Clear longjmp_resume breakpoint, then handle as BPSTAT_WHAT_SINGLE. */
+ BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE,
+
+ /* This is just used to keep track of how many enums there are. */
+ BPSTAT_WHAT_LAST
+};
-/* Nonzero if we should stop. */
-#define bpstat_stop(bs) ((bs) != NULL && (bs)->stop)
+/* Tell what to do about this bpstat. */
+enum bpstat_what bpstat_what PARAMS ((bpstat));
/* Find the bpstat associated with a breakpoint. NULL otherwise. */
-bpstat bpstat_find_breakpoint(/* bpstat, breakpoint */);
-
-/* Nonzero if we hit a momentary breakpoint. */
-#define bpstat_momentary_breakpoint(bs) ((bs) != NULL && (bs)->momentary)
+bpstat bpstat_find_breakpoint PARAMS ((bpstat, struct breakpoint *));
/* Nonzero if a signal that we got in wait() was due to circumstances
explained by the BS. */
-/* Currently that is true iff we have hit a breakpoint. */
+/* Currently that is true if we have hit a breakpoint, or if there is
+ a watchpoint enabled. */
#define bpstat_explains_signal(bs) ((bs) != NULL)
/* Nonzero if we should step constantly (e.g. watchpoints on machines
struct command_line *commands;
/* Old value associated with a watchpoint. */
value old_val;
- /* Nonzero if we should print the frame. Only significant for the first
- bpstat in the chain. */
+
+ /* Nonzero if this breakpoint tells us to print the frame. */
char print;
- /* Nonzero if we should stop. Only significant for the first bpstat in
- the chain. */
+
+ /* Nonzero if this breakpoint tells us to stop. */
char stop;
- /* Nonzero if we hit a momentary breakpoint. Only significant for the
- first bpstat in the chain. */
- char momentary;
+
+ /* Function called by bpstat_print to print stuff associated with
+ this element of the bpstat chain. Returns 0 or 1 just like
+ bpstat_print, or -1 if it can't deal with it. */
+ int (*print_it) PARAMS((bpstat bs));
};
\f
/* Type of breakpoint. */
2) step-resume (for 'next'ing over subroutine calls),
3) call-dummy (the breakpoint at the end of a subroutine stub that gdb
uses to call functions in the target).
+
+ I definately agree with (2) and (3); I'm not as sure about (1)
+ (it is a low-level thing, perhaps the best thing is that it looks
+ as much as possible like a single-step to wait_for_inferior)
+ -kingdon, 8 Apr 93.
*/
enum bptype {
projects / thirdparty / binutils-gdb.git / commitdiff
