Sync with include/linux/nl80211.h in wireless-testing.git

diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index 8cb025a0009406b9cdc13fd7f55456a9b2dc3e46..3769303d6fa67cf315d3440d16193221ad0ff9cf 100644 (file)
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -6,7 +6,7 @@
  * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
  * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
- * Copyright 2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright 2008 Michael Buesch <m@bues.ch>
  * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
@@ -161,6 +161,13 @@
  * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
  *     using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
  *     %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
+ *     Following attributes are provided for drivers that generate full Beacon
+ *     and Probe Response frames internally: %NL80211_ATTR_SSID,
+ *     %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
+ *     %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ *     %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
+ *     %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP,
+ *     %NL80211_ATTR_IE_ASSOC_RESP.
  * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
  *     parameters are like for %NL80211_CMD_SET_BEACON.
  * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
@@ -756,8 +763,12 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
  *     a single scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
+ *     scan with a single scheduled scan request, a wiphy attribute.
  * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
  *     that can be added to a scan request
+ * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
+ *     elements that can be added to a scheduled scan request
  *
  * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
  * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
@@ -838,18 +849,20 @@ enum nl80211_commands {
  * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
  *     event (u16)
  * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
- *     that protected APs should be used.
+ *     that protected APs should be used. This is also used with NEW_BEACON to
+ *     indicate that the BSS is to use protection.
  *
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to
- *     indicate which unicast key ciphers will be used with the connection
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
+ *     to indicate which unicast key ciphers will be used with the connection
  *     (an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate
- *     which group key cipher will be used with the connection (a u32).
- * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate
- *     which WPA version(s) the AP we want to associate with is using
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *     indicate which group key cipher will be used with the connection (a
+ *     u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *     indicate which WPA version(s) the AP we want to associate with is using
  *     (a u32 with flags from &enum nl80211_wpa_versions).
- * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate
- *     which key management algorithm(s) to use (an array of u32).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *     indicate which key management algorithm(s) to use (an array of u32).
  *
  * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
  *     sent out by the card, for ROAM and successful CONNECT events.
@@ -989,8 +1002,8 @@ enum nl80211_commands {
  *     driving the peer link management state machine.
  *     @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
  *
- * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities,
- *     the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
+ *     capabilities, the supported WoWLAN triggers
  * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
  *     indicate which WoW triggers should be enabled. This is also
  *     used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
@@ -1010,6 +1023,25 @@ enum nl80211_commands {
  * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
  *     necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
  *
+ * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
+ *     nested array attribute containing an entry for each band, with the entry
+ *     being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
+ *     without the length restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
+ *     and Probe Response (when response to wildcard Probe Request); see
+ *     &enum nl80211_hidden_ssid, represented as a u32
+ *
+ * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
+ *     This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
+ *     provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
+ *     driver (or firmware) replies to Probe Request frames.
+ * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
+ *     Response frames. This is used with %NL80211_CMD_NEW_BEACON and
+ *     %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
+ *     (Re)Association Response frames when the driver (or firmware) replies to
+ *     (Re)Association Request frames.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1210,6 +1242,16 @@ enum nl80211_attrs {
 
        NL80211_ATTR_REKEY_DATA,
 
+       NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
+       NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
+
+       NL80211_ATTR_SCAN_SUPP_RATES,
+
+       NL80211_ATTR_HIDDEN_SSID,
+
+       NL80211_ATTR_IE_PROBE_RESP,
+       NL80211_ATTR_IE_ASSOC_RESP,
+
        /* add attributes here, update the policy in nl80211.c */
 
        __NL80211_ATTR_AFTER_LAST,
@@ -1819,6 +1861,13 @@ enum nl80211_mntr_flags {
  * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
  * source mesh point for path selection elements.
  *
+ * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
+ * root announcements are transmitted.
+ *
+ * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
+ * access to a broader network beyond the MBSS.  This is done via Root
+ * Announcement frames.
+ *
  * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
  *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
@@ -1840,6 +1889,8 @@ enum nl80211_meshconf_params {
        NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
        NL80211_MESHCONF_HWMP_ROOTMODE,
        NL80211_MESHCONF_ELEMENT_TTL,
+       NL80211_MESHCONF_HWMP_RANN_INTERVAL,
+       NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
 
        /* keep last */
        __NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -2255,6 +2306,16 @@ struct nl80211_wowlan_pattern_support {
  *
  *     In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
  *     carrying a &struct nl80211_wowlan_pattern_support.
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
+ *     used when setting, used only to indicate that GTK rekeying is supported
+ *     by the device (flag)
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
+ *     done by the device) (flag)
+ * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
+ *     packet (flag)
+ * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
+ * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
+ *     (on devices that have rfkill in the device) (flag)
  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
  */
@@ -2264,6 +2325,11 @@ enum nl80211_wowlan_triggers {
        NL80211_WOWLAN_TRIG_DISCONNECT,
        NL80211_WOWLAN_TRIG_MAGIC_PKT,
        NL80211_WOWLAN_TRIG_PKT_PATTERN,
+       NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
+       NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
+       NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
+       NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
+       NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
 
        /* keep last */
        NUM_NL80211_WOWLAN_TRIG,
@@ -2401,4 +2467,19 @@ enum nl80211_rekey_data {
        MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
 };
 
+/**
+ * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
+ * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
+ *     Beacon frames)
+ * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
+ *     in Beacon frames
+ * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
+ *     element in Beacon frames but zero out each byte in the SSID
+ */
+enum nl80211_hidden_ssid {
+       NL80211_HIDDEN_SSID_NOT_IN_USE,
+       NL80211_HIDDEN_SSID_ZERO_LEN,
+       NL80211_HIDDEN_SSID_ZERO_CONTENTS
+};
+
 #endif /* __LINUX_NL80211_H */