raise Exception("Unexpected Measurement Report Mode: " + fields[3])
if len(fields[4]) > 0:
raise Exception("Unexpected beacon report received")
+
+def test_rrm_req_proto(dev, apdev):
+ """Radio measurement request - protocol testing"""
+ params = { "ssid": "rrm", "rrm_beacon_report": "1" }
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ bssid = hapd.own_addr()
+
+ dev[0].request("SET LCI ")
+ dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
+ addr = dev[0].own_addr()
+
+ hdr = "d0003a01" + addr.replace(':', '') + 2*bssid.replace(':', '') + "1000"
+
+ hapd.set("ext_mgmt_frame_handling", "1")
+ dev[0].request("SET ext_mgmt_frame_handling 1")
+
+ tests = []
+ # "RRM: Ignoring too short radio measurement request"
+ tests += [ "0500", "050001", "05000100" ]
+ # No measurement request element at all
+ tests += [ "0500010000" ]
+ # "RRM: Truncated element"
+ tests += [ "050001000026" ]
+ # "RRM: Element length too short"
+ tests += [ "05000100002600", "0500010000260111", "050001000026021122" ]
+ # "RRM: Element length too long"
+ tests += [ "05000100002603", "0500010000260311", "050001000026031122" ]
+ # "RRM: Enable bit not supported, ignore"
+ tests += [ "05000100002603010200" ]
+ # "RRM: Measurement report failed. TX power insertion not supported"
+ # OR
+ # "RRM: Link measurement report failed. Request too short"
+ tests += [ "0502" ]
+ # Too short LCI request
+ tests += [ "05000100002603010008" ]
+ # Too short neighbor report response
+ tests += [ "0505" ]
+ # Unexpected neighbor report response
+ tests += [ "050500", "050501", "050502", "050503", "050504", "050505" ]
+ # Too short beacon request
+ tests += [ "05000100002603010005",
+ "0500010000260f010005112233445566778899aabbcc" ]
+ # Unknown beacon report mode
+ tests += [ "05000100002610010005112233445566778899aabbccdd" ]
+ # Beacon report info subelement; no valid channels
+ tests += [ "05000100002614010005112233445566008899aabbccdd01020000" ]
+ # "RRM: Expected Measurement Request element, but EID is 0"
+ tests += [ "05000100000000" ]
+ for t in tests:
+ if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t):
+ raise Exception("MGMT_RX_PROCESS failed")
+ ev = hapd.wait_event(["MGMT-RX"], timeout=0.2)
+ if ev is not None:
+ raise Exception("Unexpected response seen at the AP: " + ev)
+
+ tests = []
+ # "RRM: Parallel measurements are not supported, reject"
+ tests += [ "05000100002603010105" ]
+ # "RRM: Unsupported radio measurement type 254"
+ tests += [ "050001000026030100fe" ]
+ # Reject LCI request
+ tests += [ "0500010000260701000811223344" ]
+ for t in tests:
+ if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t):
+ raise Exception("MGMT_RX_PROCESS failed")
+ ev = hapd.wait_event(["MGMT-RX"], timeout=5)
+ if ev is None:
+ raise Exception("No response seen at the AP")
+ hapd.dump_monitor()
+
+ dev[0].request("SET LCI " + lci)
+ tests = []
+ # "Not building LCI report - bad location subject"
+ tests += [ "0500010000260701000811223344" ]
+ for t in tests:
+ if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t):
+ raise Exception("MGMT_RX_PROCESS failed")
+ ev = hapd.wait_event(["MGMT-RX"], timeout=0.2)
+ if ev is not None:
+ raise Exception("Unexpected response seen at the AP: " + ev)
+
+ tests = []
+ # LCI report or reject
+ tests += [ "0500010000260701000801223344",
+ "05000100002607010008010402ff",
+ "05000100002608010008010402ffff" ]
+ for t in tests:
+ if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t):
+ raise Exception("MGMT_RX_PROCESS failed")
+ ev = hapd.wait_event(["MGMT-RX"], timeout=5)
+ if ev is None:
+ raise Exception("No response seen at the AP")
+ hapd.dump_monitor()
+
+ hapd.set("ext_mgmt_frame_handling", "0")
+ dev[0].request("SET ext_mgmt_frame_handling 0")
+ dev[0].request("SET LCI ")