--- /dev/null
+# Copyright (C) 2014-2019 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.
+#
+# Unusual variables checked by this code:
+# NOP - four byte opcode for no-op (defaults to none)
+# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
+# empty.
+# SMALL_DATA_CTOR - .ctors contains small data.
+# SMALL_DATA_DTOR - .dtors contains small data.
+# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
+# INITIAL_READONLY_SECTIONS - at start of text segment
+# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
+# (e.g., .PARISC.milli)
+# OTHER_TEXT_SECTIONS - these get put in .text when relocating
+# INITIAL_READWRITE_SECTIONS - at start of data segment (after relro)
+# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
+# (e.g., .PARISC.global)
+# OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
+# (e.g. PPC32 .fixup, .got[12])
+# OTHER_RELRO_SECTIONS_2 - as above, but after .dynamic in text segment
+# OTHER_BSS_SECTIONS - other than .bss .sbss ...
+# ATTRS_SECTIONS - at the end
+# OTHER_SECTIONS - at the end
+# EXECUTABLE_SYMBOLS - symbols that must be defined for an
+# executable (e.g., _DYNAMIC_LINK)
+# TEXT_START_ADDR - the first byte of the text segment, after any
+# headers.
+# TEXT_BASE_ADDRESS - the first byte of the text segment.
+# TEXT_START_SYMBOLS - symbols that appear at the start of the
+# .text section.
+# DATA_START_SYMBOLS - symbols that appear at the start of the
+# .data section.
+# DATA_END_SYMBOLS - symbols that appear at the end of the
+# writeable data sections.
+# OTHER_GOT_SYMBOLS - symbols defined just before .got.
+# OTHER_GOT_SECTIONS - sections just after .got.
+# OTHER_PLT_SECTIONS - sections just after .plt.
+# OTHER_SDATA_SECTIONS - sections just after .sdata.
+# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
+# .bss section besides __bss_start.
+# PLT_NEXT_DATA - .plt next to data segment when .plt is in text segment.
+# DATA_PLT - .plt should be in data segment, not text segment.
+# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
+# BSS_PLT - .plt should be in bss segment
+# NO_REL_RELOCS - Don't include .rel.* sections in script
+# NO_RELA_RELOCS - Don't include .rela.* sections in script
+# NON_ALLOC_DYN - Place dynamic sections after data segment.
+# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
+# EMBEDDED - whether this is for an embedded system.
+# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
+# start address of shared library.
+# INPUT_FILES - INPUT command of files to always include
+# WRITABLE_RODATA - if set, the .rodata section should be writable
+# INIT_START, INIT_END - statements just before and just after
+# combination of .init sections.
+# FINI_START, FINI_END - statements just before and just after
+# combination of .fini sections.
+# STACK_ADDR - start of a .stack section.
+# OTHER_SYMBOLS - symbols to place right at the end of the script.
+# ETEXT_NAME - name of a symbol for the end of the text section,
+# normally etext.
+# SEPARATE_CODE - if set, .text and similar sections containing
+# actual machine instructions must be in wholly disjoint
+# pages from any other data, including headers
+# SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
+# so that .got can be in the RELRO area. It should be set to
+# the number of bytes in the beginning of .got.plt which can be
+# in the RELRO area as well.
+# USER_LABEL_PREFIX - prefix to add to user-visible symbols.
+# RODATA_NAME, SDATA_NAME, SBSS_NAME, BSS_NAME - base parts of names
+# for standard sections, without initial "." or suffixes.
+#
+# When adding sections, do note that the names of some sections are used
+# when specifying the start address of the next.
+#
+
+# Many sections come in three flavours. There is the 'real' section,
+# like ".data". Then there are the per-procedure or per-variable
+# sections, generated by -ffunction-sections and -fdata-sections in GCC,
+# and useful for --gc-sections, which for a variable "foo" might be
+# ".data.foo". Then there are the linkonce sections, for which the linker
+# eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
+# The exact correspondences are:
+#
+# Section Linkonce section
+# .text .gnu.linkonce.t.foo
+# .rodata .gnu.linkonce.r.foo
+# .data .gnu.linkonce.d.foo
+# .bss .gnu.linkonce.b.foo
+# .sdata .gnu.linkonce.s.foo
+# .sbss .gnu.linkonce.sb.foo
+# .sdata2 .gnu.linkonce.s2.foo
+# .sbss2 .gnu.linkonce.sb2.foo
+# .debug_info .gnu.linkonce.wi.foo
+# .tdata .gnu.linkonce.td.foo
+# .tbss .gnu.linkonce.tb.foo
+# .lrodata .gnu.linkonce.lr.foo
+# .ldata .gnu.linkonce.l.foo
+# .lbss .gnu.linkonce.lb.foo
+#
+# Each of these can also have corresponding .rel.* and .rela.* sections.
+
+if test -n "$NOP"; then
+ FILL="=$NOP"
+else
+ FILL=
+fi
+
+test -n "$CREATE_SHLIB$CREATE_PIE" && CREATE_PIC=" "
+test -z "$RODATA_NAME" && RODATA_NAME=rodata
+test -z "$SDATA_NAME" && SDATA_NAME=sdata
+test -z "$SBSS_NAME" && SBSS_NAME=sbss
+test -z "$BSS_NAME" && BSS_NAME=bss
+test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
+test -z "${ELFSIZE}" && ELFSIZE=32
+test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
+test "$LD_FLAG" = "N" && DATA_ADDR=.
+test -z "${ETEXT_NAME}" && ETEXT_NAME=${USER_LABEL_PREFIX}etext
+test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
+test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
+if test -z "$DATA_SEGMENT_ALIGN"; then
+ test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
+ test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
+ DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
+ DATA_SEGMENT_RELRO_END=""
+ DATA_SEGMENT_END=""
+ if test -n "${COMMONPAGESIZE}"; then
+ if test "${SEGMENT_SIZE}" != "${MAXPAGESIZE}"; then
+ DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
+ else
+ DATA_SEGMENT_ALIGN="DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
+ fi
+ DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
+ DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
+ fi
+fi
+if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
+ INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }"
+fi
+if test -z "$PLT"; then
+ IPLT=".iplt ${RELOCATING-0} : { *(.iplt) }"
+ PLT=".plt ${RELOCATING-0} : { *(.plt)${RELOCATING+${IREL_IN_PLT+ *(.iplt)}} }
+ ${IREL_IN_PLT-$IPLT}"
+fi
+test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=
+if test -z "$GOT"; then
+ if test -z "$SEPARATE_GOTPLT"; then
+ GOT=".got ${RELOCATING-0} : {${RELOCATING+ *(.got.plt) *(.igot.plt)} *(.got)${RELOCATING+ *(.igot)} }"
+ else
+ GOT=".got ${RELOCATING-0} : { *(.got)${RELOCATING+ *(.igot)} }"
+ GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt)${RELOCATING+ *(.igot.plt)} }"
+ fi
+fi
+REL_IFUNC=".rel.ifunc ${RELOCATING-0} : { *(.rel.ifunc) }"
+RELA_IFUNC=".rela.ifunc ${RELOCATING-0} : { *(.rela.ifunc) }"
+REL_IPLT=".rel.iplt ${RELOCATING-0} :
+ {
+ ${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_start = .);}}
+ *(.rel.iplt)
+ ${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_end = .);}}
+ }"
+RELA_IPLT=".rela.iplt ${RELOCATING-0} :
+ {
+ ${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_start = .);}}
+ *(.rela.iplt)
+ ${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_end = .);}}
+ }"
+DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".${RODATA_NAME} ${RELOCATING-0} : { *(.${RODATA_NAME}${RELOCATING+ .${RODATA_NAME}.* .gnu.linkonce.r.*}) }"
+DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }"
+DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }"
+if test -z "${NO_SMALL_DATA}"; then
+ SBSS=".${SBSS_NAME} ${RELOCATING-0} :
+ {
+ ${RELOCATING+${SBSS_START_SYMBOLS}}
+ ${CREATE_SHLIB+*(.${SBSS_NAME}2 .${SBSS_NAME}2.* .gnu.linkonce.sb2.*)}
+ ${RELOCATING+*(.dyn${SBSS_NAME})}
+ *(.${SBSS_NAME}${RELOCATING+ .${SBSS_NAME}.* .gnu.linkonce.sb.*})
+ ${RELOCATING+*(.scommon)}
+ ${RELOCATING+${SBSS_END_SYMBOLS}}
+ }"
+ SBSS2=".${SBSS_NAME}2 ${RELOCATING-0} : { *(.${SBSS_NAME}2${RELOCATING+ .${SBSS_NAME}2.* .gnu.linkonce.sb2.*}) }"
+ SDATA="/* We want the small data sections together, so single-instruction offsets
+ can access them all, and initialized data all before uninitialized, so
+ we can shorten the on-disk segment size. */
+ .${SDATA_NAME} ${RELOCATING-0} :
+ {
+ ${RELOCATING+${SDATA_START_SYMBOLS}}
+ ${CREATE_SHLIB+*(.${SDATA_NAME}2 .${SDATA_NAME}2.* .gnu.linkonce.s2.*)}
+ *(.${SDATA_NAME}${RELOCATING+ .${SDATA_NAME}.* .gnu.linkonce.s.*})
+ }"
+ SDATA2=".${SDATA_NAME}2 ${RELOCATING-0} :
+ {
+ ${RELOCATING+${SDATA2_START_SYMBOLS}}
+ *(.${SDATA_NAME}2${RELOCATING+ .${SDATA_NAME}2.* .gnu.linkonce.s2.*})
+ }"
+ REL_SDATA=".rel.${SDATA_NAME} ${RELOCATING-0} : { *(.rel.${SDATA_NAME}${RELOCATING+ .rel.${SDATA_NAME}.* .rel.gnu.linkonce.s.*}) }
+ .rela.${SDATA_NAME} ${RELOCATING-0} : { *(.rela.${SDATA_NAME}${RELOCATING+ .rela.${SDATA_NAME}.* .rela.gnu.linkonce.s.*}) }"
+ REL_SBSS=".rel.${SBSS_NAME} ${RELOCATING-0} : { *(.rel.${SBSS_NAME}${RELOCATING+ .rel.${SBSS_NAME}.* .rel.gnu.linkonce.sb.*}) }
+ .rela.${SBSS_NAME} ${RELOCATING-0} : { *(.rela.${SBSS_NAME}${RELOCATING+ .rela.${SBSS_NAME}.* .rela.gnu.linkonce.sb.*}) }"
+ REL_SDATA2=".rel.${SDATA_NAME}2 ${RELOCATING-0} : { *(.rel.${SDATA_NAME}2${RELOCATING+ .rel.${SDATA_NAME}2.* .rel.gnu.linkonce.s2.*}) }
+ .rela.${SDATA_NAME}2 ${RELOCATING-0} : { *(.rela.${SDATA_NAME}2${RELOCATING+ .rela.${SDATA_NAME}2.* .rela.gnu.linkonce.s2.*}) }"
+ REL_SBSS2=".rel.${SBSS_NAME}2 ${RELOCATING-0} : { *(.rel.${SBSS_NAME}2${RELOCATING+ .rel.${SBSS_NAME}2.* .rel.gnu.linkonce.sb2.*}) }
+ .rela.${SBSS_NAME}2 ${RELOCATING-0} : { *(.rela.${SBSS_NAME}2${RELOCATING+ .rela.${SBSS_NAME}2.* .rela.gnu.linkonce.sb2.*}) }"
+else
+ NO_SMALL_DATA=" "
+fi
+if test -z "${SDATA_GOT}${DATA_GOT}"; then
+ if test -n "${NO_SMALL_DATA}"; then
+ DATA_GOT=" "
+ fi
+fi
+if test -z "${SDATA_GOT}${DATA_GOT}"; then
+ if test -z "${NO_SMALL_DATA}"; then
+ SDATA_GOT=" "
+ fi
+fi
+test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
+test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
+ .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
+ .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
+ .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
+ .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
+ .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
+ .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
+test "${LARGE_SECTIONS}" = "yes" && LARGE_BSS="
+ .lbss ${RELOCATING-0} :
+ {
+ ${RELOCATING+*(.dynlbss)}
+ *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
+ ${RELOCATING+*(LARGE_COMMON)}
+ }"
+test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
+ .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+ {
+ *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
+ }
+ .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+ {
+ *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
+ ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
+ }"
+if test "${ENABLE_INITFINI_ARRAY}" = "yes"; then
+ SORT_INIT_ARRAY="KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))"
+ SORT_FINI_ARRAY="KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))"
+ CTORS_IN_INIT_ARRAY="EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors"
+ DTORS_IN_FINI_ARRAY="EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors"
+else
+ SORT_INIT_ARRAY="KEEP (*(SORT(.init_array.*)))"
+ SORT_FINI_ARRAY="KEEP (*(SORT(.fini_array.*)))"
+ CTORS_IN_INIT_ARRAY=
+ DTORS_IN_FINI_ARRAY=
+fi
+PREINIT_ARRAY=".preinit_array :
+ {
+ ${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}
+ KEEP (*(.preinit_array))
+ ${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}
+ }"
+INIT_ARRAY=".init_array :
+ {
+ ${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}
+ ${SORT_INIT_ARRAY}
+ KEEP (*(.init_array ${CTORS_IN_INIT_ARRAY}))
+ ${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}
+ }"
+FINI_ARRAY=".fini_array :
+ {
+ ${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}
+ ${SORT_FINI_ARRAY}
+ KEEP (*(.fini_array ${DTORS_IN_FINI_ARRAY}))
+ ${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}
+ }"
+CTOR=".ctors ${CONSTRUCTING-0} :
+ {
+ ${CONSTRUCTING+${CTOR_START}}
+ /* gcc uses crtbegin.o to find the start of
+ the constructors, so we make sure it is
+ first. Because this is a wildcard, it
+ doesn't matter if the user does not
+ actually link against crtbegin.o; the
+ linker won't look for a file to match a
+ wildcard. The wildcard also means that it
+ doesn't matter which directory crtbegin.o
+ is in. */
+
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
+
+ /* We don't want to include the .ctor section from
+ the crtend.o file until after the sorted ctors.
+ The .ctor section from the crtend file contains the
+ end of ctors marker and it must be last */
+
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*(.ctors))
+ ${CONSTRUCTING+${CTOR_END}}
+ }"
+DTOR=".dtors ${CONSTRUCTING-0} :
+ {
+ ${CONSTRUCTING+${DTOR_START}}
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*(.dtors))
+ ${CONSTRUCTING+${DTOR_END}}
+ }"
+STACK=".stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
+ {
+ ${RELOCATING+${USER_LABEL_PREFIX}_stack = .;}
+ *(.stack)
+ ${RELOCATING+${STACK_SENTINEL}}
+ }"
+
+TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${TEXT_START_ADDR})"
+SHLIB_TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${SHLIB_TEXT_START_ADDR:-0})"
+
+# Don't bother with separate code segment when there are data sections
+# between .plt and .text.
+if test -z "$TINY_READONLY_SECTION"; then
+ case "$LD_FLAG" in
+ *textonly*)
+ SEPARATE_TEXT=" "
+ TEXT_SEGMENT_ALIGN=". = ALIGN(${MAXPAGESIZE});"
+ ;;
+ esac
+fi
+
+if [ -z "$SEPARATE_CODE" ]; then
+ SIZEOF_HEADERS_CODE=" + SIZEOF_HEADERS"
+else
+ SIZEOF_HEADERS_CODE=
+fi
+
+# If this is for an embedded system, don't add SIZEOF_HEADERS.
+if [ -z "$EMBEDDED" ]; then
+ test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}${SIZEOF_HEADERS_CODE}"
+else
+ test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
+fi
+
+cat <<EOF
+/* Copyright (C) 2014-2019 Free Software Foundation, Inc.
+
+ Copying and distribution of this script, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved. */
+
+OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
+ "${LITTLE_OUTPUT_FORMAT}")
+OUTPUT_ARCH(${OUTPUT_ARCH})
+
+${RELOCATING+${LIB_SEARCH_DIRS}}
+${RELOCATING+${CREATE_SHLIB-${EXECUTABLE_SYMBOLS}}}
+${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
+
+SECTIONS
+{
+ ${RELOCATING+${SEPARATE_TEXT-/* Read-only sections, merged into text segment: */}}
+ ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
+ ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR}${SIZEOF_HEADERS_CODE};}}
+ ${CREATE_PIE+${RELOCATING+PROVIDE (__executable_start = ${SHLIB_TEXT_START_ADDR}); . = ${SHLIB_TEXT_START_ADDR}${SIZEOF_HEADERS_CODE};}}
+EOF
+
+emit_early_ro()
+{
+ cat <<EOF
+ ${INITIAL_READONLY_SECTIONS}
+ .note.gnu.build-id ${RELOCATING-0}: { *(.note.gnu.build-id) }
+EOF
+}
+
+test -n "${SEPARATE_CODE}" || emit_early_ro
+
+test -n "${RELOCATING+0}" || unset NON_ALLOC_DYN
+test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC=
+cat > ldscripts/dyntmp.$$ <<EOF
+ ${TEXT_DYNAMIC+${DYNAMIC}}
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
+EOF
+
+if [ "x$COMBRELOC" = x ]; then
+ COMBRELOCCAT="cat >> ldscripts/dyntmp.$$"
+else
+ COMBRELOCCAT="cat > $COMBRELOC"
+fi
+eval $COMBRELOCCAT <<EOF
+ ${INITIAL_RELOC_SECTIONS}
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.${RODATA_NAME} ${RELOCATING-0} : { *(.rel.${RODATA_NAME}${RELOCATING+ .rel.${RODATA_NAME}.* .rel.gnu.linkonce.r.*}) }
+ .rela.${RODATA_NAME} ${RELOCATING-0} : { *(.rela.${RODATA_NAME}${RELOCATING+ .rela.${RODATA_NAME}.* .rela.gnu.linkonce.r.*}) }
+ ${OTHER_READONLY_RELOC_SECTIONS}
+ .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*}) }
+ .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*}) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+ ${OTHER_READWRITE_RELOC_SECTIONS}
+ .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
+ .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
+ .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
+ .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ ${OTHER_GOT_RELOC_SECTIONS}
+ ${REL_SDATA}
+ ${REL_SBSS}
+ ${REL_SDATA2}
+ ${REL_SBSS2}
+ .rel.${BSS_NAME} ${RELOCATING-0} : { *(.rel.${BSS_NAME}${RELOCATING+ .rel.${BSS_NAME}.* .rel.gnu.linkonce.b.*}) }
+ .rela.${BSS_NAME} ${RELOCATING-0} : { *(.rela.${BSS_NAME}${RELOCATING+ .rela.${BSS_NAME}.* .rela.gnu.linkonce.b.*}) }
+ ${REL_LARGE}
+ ${IREL_IN_PLT+$REL_IFUNC}
+ ${IREL_IN_PLT+$RELA_IFUNC}
+ ${IREL_IN_PLT-$REL_IPLT}
+ ${IREL_IN_PLT-$RELA_IPLT}
+EOF
+
+if [ -n "$COMBRELOC" ]; then
+cat >> ldscripts/dyntmp.$$ <<EOF
+ .rel.dyn ${RELOCATING-0} :
+ {
+EOF
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;/__rela_iplt_/d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$
+cat >> ldscripts/dyntmp.$$ <<EOF
+ }
+ .rela.dyn ${RELOCATING-0} :
+ {
+EOF
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;/__rel_iplt_/d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$
+cat >> ldscripts/dyntmp.$$ <<EOF
+ }
+EOF
+fi
+
+cat >> ldscripts/dyntmp.$$ <<EOF
+ .rel.plt ${RELOCATING-0} :
+ {
+ *(.rel.plt)
+ ${IREL_IN_PLT+${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_start = .);}}}
+ ${IREL_IN_PLT+${RELOCATING+*(.rel.iplt)}}
+ ${IREL_IN_PLT+${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_end = .);}}}
+ }
+ .rela.plt ${RELOCATING-0} :
+ {
+ *(.rela.plt)
+ ${IREL_IN_PLT+${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_start = .);}}}
+ ${IREL_IN_PLT+${RELOCATING+*(.rela.iplt)}}
+ ${IREL_IN_PLT+${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_end = .);}}}
+ }
+ ${OTHER_PLT_RELOC_SECTIONS}
+EOF
+
+emit_dyn()
+{
+ if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then
+ cat ldscripts/dyntmp.$$
+ else
+ if test -z "${NO_REL_RELOCS}"; then
+ sed -e '/^[ ]*\.rela\.[^}]*$/,/}/d;/^[ ]*\.rela\./d;/__rela_iplt_/d' ldscripts/dyntmp.$$
+ fi
+ if test -z "${NO_RELA_RELOCS}"; then
+ sed -e '/^[ ]*\.rel\.[^}]*$/,/}/d;/^[ ]*\.rel\./d;/__rel_iplt_/d' ldscripts/dyntmp.$$
+ fi
+ fi
+ rm -f ldscripts/dyntmp.$$
+}
+
+test -n "${NON_ALLOC_DYN}${SEPARATE_CODE}" || emit_dyn
+
+cat <<EOF
+ ${RELOCATING+${TEXT_SEGMENT_ALIGN}}
+
+ .init ${RELOCATING-0}${RELOCATING+${INIT_ADDR}} :
+ {
+ ${RELOCATING+${INIT_START}}
+ KEEP (*(SORT_NONE(.init)))
+ ${RELOCATING+${INIT_END}}
+ } ${FILL}
+
+ ${TEXT_PLT+${PLT_NEXT_DATA-${PLT} ${OTHER_PLT_SECTIONS}}}
+ ${TINY_READONLY_SECTION}
+ .text ${RELOCATING-0} :
+ {
+ ${RELOCATING+${TEXT_START_SYMBOLS}}
+ ${RELOCATING+*(.text.unlikely .text.*_unlikely .text.unlikely.*)}
+ ${RELOCATING+*(.text.exit .text.exit.*)}
+ ${RELOCATING+*(.text.startup .text.startup.*)}
+ ${RELOCATING+*(.text.hot .text.hot.*)}
+ *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
+ /* .gnu.warning sections are handled specially by elf32.em. */
+ *(.gnu.warning)
+ ${RELOCATING+${OTHER_TEXT_SECTIONS}}
+ } ${FILL}
+ .fini ${RELOCATING-0}${RELOCATING+${FINI_ADDR}} :
+ {
+ ${RELOCATING+${FINI_START}}
+ KEEP (*(SORT_NONE(.fini)))
+ ${RELOCATING+${FINI_END}}
+ } ${FILL}
+ ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);}
+ ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
+ ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
+ ${RELOCATING+${TEXT_SEGMENT_ALIGN}}
+EOF
+
+if test -n "${SEPARATE_CODE}${SEPARATE_TEXT}"; then
+ if test -n "${RODATA_ADDR}"; then
+ RODATA_ADDR="\
+SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR}) + SIZEOF_HEADERS"
+ else
+ RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
+ RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR})"
+ fi
+ if test -n "${SHLIB_RODATA_ADDR}"; then
+ SHLIB_RODATA_ADDR="\
+SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR}) + SIZEOF_HEADERS"
+ else
+ SHLIB_RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
+ SHLIB_RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR})"
+ fi
+ cat <<EOF
+ ${RELOCATING+/* Adjust the address for the rodata segment. We want to adjust up to
+ the same address within the page on the next page up. */
+ ${CREATE_SHLIB-${CREATE_PIE-. = ${RODATA_ADDR};}}
+ ${CREATE_SHLIB+. = ${SHLIB_RODATA_ADDR};}
+ ${CREATE_PIE+. = ${SHLIB_RODATA_ADDR};}}
+EOF
+ if test -n "${SEPARATE_CODE}"; then
+ emit_early_ro
+ emit_dyn
+ fi
+fi
+
+cat <<EOF
+ ${WRITABLE_RODATA-${RODATA}}
+ .${RODATA_NAME}1 ${RELOCATING-0} : { *(.${RODATA_NAME}1) }
+ ${CREATE_SHLIB-${SDATA2}}
+ ${CREATE_SHLIB-${SBSS2}}
+ ${OTHER_READONLY_SECTIONS}
+ .eh_frame_hdr ${RELOCATING-0} : { *(.eh_frame_hdr)${RELOCATING+ *(.eh_frame_entry .eh_frame_entry.*)} }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame))${RELOCATING+ *(.eh_frame.*)} }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table${RELOCATING+ .gcc_except_table.*}) }
+ .gnu_extab ${RELOCATING-0} : ONLY_IF_RO { *(.gnu_extab*) }
+ /* These sections are generated by the Sun/Oracle C++ compiler. */
+ .exception_ranges ${RELOCATING-0} : ONLY_IF_RO { *(.exception_ranges${RELOCATING+*}) }
+ ${TEXT_PLT+${PLT_NEXT_DATA+${PLT} ${OTHER_PLT_SECTIONS}}}
+
+ ${RELOCATING+/* Adjust the address for the data segment. We want to adjust up to
+ the same address within the page on the next page up. */}
+ ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
+ ${CREATE_SHLIB+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}
+ ${CREATE_PIE+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}
+
+ /* Exception handling */
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame))${RELOCATING+ *(.eh_frame.*)} }
+ .gnu_extab ${RELOCATING-0} : ONLY_IF_RW { *(.gnu_extab) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table${RELOCATING+ .gcc_except_table.*}) }
+ .exception_ranges ${RELOCATING-0} : ONLY_IF_RW { *(.exception_ranges${RELOCATING+*}) }
+
+ /* Thread Local Storage sections */
+ .tdata ${RELOCATING-0} :
+ {
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__tdata_start = .);}}
+ *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*})
+ }
+ .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
+
+ ${RELOCATING+${PREINIT_ARRAY}}
+ ${RELOCATING+${INIT_ARRAY}}
+ ${RELOCATING+${FINI_ARRAY}}
+ ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
+ ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
+
+ ${RELOCATING+${DATARELRO}}
+ ${OTHER_RELRO_SECTIONS}
+ ${TEXT_DYNAMIC-${DYNAMIC}}
+ ${OTHER_RELRO_SECTIONS_2}
+ ${DATA_GOT+${RELRO_NOW+${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}}}
+ ${DATA_GOT+${RELRO_NOW+${GOT}}}
+ ${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
+ ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
+ ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
+ ${INITIAL_READWRITE_SECTIONS}
+ ${DATA_SDATA+${SDATA}}
+ ${DATA_SDATA+${OTHER_SDATA_SECTIONS}}
+ ${DATA_SDATA+${SBSS}}
+ ${DATA_GOT+${RELRO_NOW-${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}}}
+ ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
+ ${DATA_GOT+${RELRO_NOW-${GOTPLT}}}
+
+ ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
+
+ .data ${RELOCATING-0} :
+ {
+ ${RELOCATING+${DATA_START_SYMBOLS}}
+ *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
+ ${CONSTRUCTING+SORT(CONSTRUCTORS)}
+ }
+ .data1 ${RELOCATING-0} : { *(.data1) }
+ ${WRITABLE_RODATA+${RODATA}}
+ ${OTHER_READWRITE_SECTIONS}
+ ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
+ ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
+ ${SDATA_GOT+${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}}
+ ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS+. = .; ${OTHER_GOT_SYMBOLS}}}}
+ ${SDATA_GOT+${GOT}}
+ ${SDATA_GOT+${OTHER_GOT_SECTIONS}}
+ ${DATA_SDATA-${SDATA}}
+ ${DATA_SDATA-${OTHER_SDATA_SECTIONS}}
+ ${RELOCATING+${DATA_END_SYMBOLS-${CREATE_SHLIB+PROVIDE (}${USER_LABEL_PREFIX}_edata = .${CREATE_SHLIB+)}; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
+ ${RELOCATING+. = .;}
+ ${RELOCATING+${CREATE_SHLIB+PROVIDE (}${USER_LABEL_PREFIX}__bss_start = .${CREATE_SHLIB+)};}
+ ${RELOCATING+${OTHER_BSS_SYMBOLS}}
+ ${DATA_SDATA-${SBSS}}
+ ${BSS_PLT+${PLT}}
+ .${BSS_NAME} ${RELOCATING-0} :
+ {
+ ${RELOCATING+*(.dynbss)}
+ *(.${BSS_NAME}${RELOCATING+ .${BSS_NAME}.* .gnu.linkonce.b.*})
+ ${RELOCATING+*(COMMON)
+ /* Align here to ensure that the .bss section occupies space up to
+ _end. Align after .bss to ensure correct alignment even if the
+ .bss section disappears because there are no input sections.
+ FIXME: Why do we need it? When there is no .bss section, we do not
+ pad the .data section. */
+ . = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
+ }
+ ${OTHER_BSS_SECTIONS}
+ ${LARGE_BSS_AFTER_BSS+${LARGE_BSS}}
+ ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
+ ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+EOF
+
+LARGE_DATA_ADDR=". = SEGMENT_START(\"ldata-segment\", ${LARGE_DATA_ADDR-.});"
+SHLIB_LARGE_DATA_ADDR=". = SEGMENT_START(\"ldata-segment\", ${SHLIB_LARGE_DATA_ADDR-.});"
+
+cat <<EOF
+ ${RELOCATING+${CREATE_SHLIB-${CREATE_PIE-${LARGE_DATA_ADDR}}}}
+ ${CREATE_SHLIB+${SHLIB_LARGE_DATA_ADDR}}
+ ${CREATE_PIE+${SHLIB_LARGE_DATA_ADDR}}
+ ${LARGE_SECTIONS}
+ ${LARGE_BSS_AFTER_BSS-${LARGE_BSS}}
+ ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+ ${RELOCATING+${OTHER_END_SYMBOLS}}
+ ${RELOCATING+${END_SYMBOLS-${CREATE_SHLIB+PROVIDE (}${USER_LABEL_PREFIX}_end = .${CREATE_SHLIB+)}; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
+ ${RELOCATING+${DATA_SEGMENT_END}}
+ ${TINY_DATA_SECTION}
+ ${TINY_BSS_SECTION}
+ ${STACK_ADDR+${STACK}}
+EOF
+
+test -z "${NON_ALLOC_DYN}" || emit_dyn
+
+cat <<EOF
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+
+ .comment 0 : { *(.comment) }
+
+ .gnu.build.attributes : { *(.gnu.build.attributes${RELOCATING+ .gnu.build.attributes.*}) }
+
+EOF
+
+cat <<EOF
+ ${ATTRS_SECTIONS}
+ ${OTHER_SECTIONS}
+ ${RELOCATING+${OTHER_SYMBOLS}}
+ ${RELOCATING+${DISCARDED}}
+}
+EOF
projects / thirdparty / binutils-gdb.git / commitdiff
