From: Daniel Jacobowitz Date: Wed, 22 Nov 2006 18:51:58 +0000 (+0000) Subject: gdb/ X-Git-Tag: drow-reverse-20070409-branchpoint~1243 X-Git-Url: http://git.ipfire.org/?a=commitdiff_plain;h=29d73ae48cd62606a7b493ce6863b07bae97f775;p=thirdparty%2Fbinutils-gdb.git gdb/ * Makefile.in (arm-tdep.o): Update dependencies. * arm-tdep.c (thumb_skip_prologue): Remove. (thumb_analyze_prologue): New function. (arm_skip_prologue): Use thumb_analyze_prologue. (thumb_scan_prologue): Ditto. gdb/testsuite/ * gdb.arch/thumb-prologue.c, gdb.arch/thumb-prologue.exp: New files. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index d818a292e57..84a5a54a618 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,11 @@ +2006-11-22 Daniel Jacobowitz + + * Makefile.in (arm-tdep.o): Update dependencies. + * arm-tdep.c (thumb_skip_prologue): Remove. + (thumb_analyze_prologue): New function. + (arm_skip_prologue): Use thumb_analyze_prologue. + (thumb_scan_prologue): Ditto. + 2006-11-22 Ulrich Weigand * configure.tgt: Enable gdbserver for SPU target. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 25a04a21e92..6ec2d2e82c9 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -1807,7 +1807,7 @@ arm-tdep.o: arm-tdep.c $(defs_h) $(frame_h) $(inferior_h) $(gdbcmd_h) \ $(frame_unwind_h) $(frame_base_h) $(trad_frame_h) $(arm_tdep_h) \ $(gdb_sim_arm_h) $(elf_bfd_h) $(coff_internal_h) $(elf_arm_h) \ $(gdb_assert_h) $(bfd_in2_h) $(libcoff_h) $(objfiles_h) \ - $(dwarf2_frame_h) $(gdbtypes_h) + $(dwarf2_frame_h) $(gdbtypes_h) $(prologue_value_h) auxv.o: auxv.c $(defs_h) $(target_h) $(gdbtypes_h) $(command_h) \ $(inferior_h) $(valprint_h) $(gdb_assert_h) $(auxv_h) \ $(elf_common_h) diff --git a/gdb/arm-tdep.c b/gdb/arm-tdep.c index eaa089fb376..f4a6a37f2dd 100644 --- a/gdb/arm-tdep.c +++ b/gdb/arm-tdep.c @@ -41,6 +41,7 @@ #include "objfiles.h" #include "dwarf2-frame.h" #include "gdbtypes.h" +#include "prologue-value.h" #include "arm-tdep.h" #include "gdb/sim-arm.h" @@ -212,84 +213,156 @@ arm_smash_text_address (CORE_ADDR val) return val & ~1; } -/* A typical Thumb prologue looks like this: - push {r7, lr} - add sp, sp, #-28 - add r7, sp, #12 - Sometimes the latter instruction may be replaced by: - mov r7, sp - - or like this: - push {r7, lr} - mov r7, sp - sub sp, #12 - - or, on tpcs, like this: - sub sp,#16 - push {r7, lr} - (many instructions) - mov r7, sp - sub sp, #12 - - There is always one instruction of three classes: - 1 - push - 2 - setting of r7 - 3 - adjusting of sp - - When we have found at least one of each class we are done with the prolog. - Note that the "sub sp, #NN" before the push does not count. - */ +/* Analyze a Thumb prologue, looking for a recognizable stack frame + and frame pointer. Scan until we encounter a store that could + clobber the stack frame unexpectedly, or an unknown instruction. */ static CORE_ADDR -thumb_skip_prologue (CORE_ADDR pc, CORE_ADDR func_end) +thumb_analyze_prologue (struct gdbarch *gdbarch, + CORE_ADDR start, CORE_ADDR limit, + struct arm_prologue_cache *cache) { - CORE_ADDR current_pc; - /* findmask: - bit 0 - push { rlist } - bit 1 - mov r7, sp OR add r7, sp, #imm (setting of r7) - bit 2 - sub sp, #simm OR add sp, #simm (adjusting of sp) - */ - int findmask = 0; + int i; + pv_t regs[16]; + struct pv_area *stack; + struct cleanup *back_to; + CORE_ADDR offset; - for (current_pc = pc; - current_pc + 2 < func_end && current_pc < pc + 40; - current_pc += 2) + for (i = 0; i < 16; i++) + regs[i] = pv_register (i, 0); + stack = make_pv_area (ARM_SP_REGNUM); + back_to = make_cleanup_free_pv_area (stack); + + /* The call instruction saved PC in LR, and the current PC is not + interesting. Due to this file's conventions, we want the value + of LR at this function's entry, not at the call site, so we do + not record the save of the PC - when the ARM prologue analyzer + has also been converted to the pv mechanism, we could record the + save here and remove the hack in prev_register. */ + regs[ARM_PC_REGNUM] = pv_unknown (); + + while (start < limit) { - unsigned short insn = read_memory_unsigned_integer (current_pc, 2); + unsigned short insn; + + insn = read_memory_unsigned_integer (start, 2); if ((insn & 0xfe00) == 0xb400) /* push { rlist } */ { - findmask |= 1; /* push found */ + int regno; + int mask; + int stop = 0; + + /* Bits 0-7 contain a mask for registers R0-R7. Bit 8 says + whether to save LR (R14). */ + mask = (insn & 0xff) | ((insn & 0x100) << 6); + + /* Calculate offsets of saved R0-R7 and LR. */ + for (regno = ARM_LR_REGNUM; regno >= 0; regno--) + if (mask & (1 << regno)) + { + if (pv_area_store_would_trash (stack, regs[ARM_SP_REGNUM])) + { + stop = 1; + break; + } + + regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], + -4); + pv_area_store (stack, regs[ARM_SP_REGNUM], 4, regs[regno]); + } + + if (stop) + break; } else if ((insn & 0xff00) == 0xb000) /* add sp, #simm OR sub sp, #simm */ { - if ((findmask & 1) == 0) /* before push ? */ - continue; + offset = (insn & 0x7f) << 2; /* get scaled offset */ + if (insn & 0x80) /* Check for SUB. */ + regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], + -offset); else - findmask |= 4; /* add/sub sp found */ + regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], + offset); } else if ((insn & 0xff00) == 0xaf00) /* add r7, sp, #imm */ + regs[THUMB_FP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], + (insn & 0xff) << 2); + else if ((insn & 0xff00) == 0x4600) /* mov hi, lo or mov lo, hi */ { - findmask |= 2; /* setting of r7 found */ + int dst_reg = (insn & 0x7) + ((insn & 0x80) >> 4); + int src_reg = (insn & 0x78) >> 3; + regs[dst_reg] = regs[src_reg]; } - else if (insn == 0x466f) /* mov r7, sp */ + else if ((insn & 0xf800) == 0x9000) /* str rd, [sp, #off] */ { - findmask |= 2; /* setting of r7 found */ + /* Handle stores to the stack. Normally pushes are used, + but with GCC -mtpcs-frame, there may be other stores + in the prologue to create the frame. */ + int regno = (insn >> 8) & 0x7; + pv_t addr; + + offset = (insn & 0xff) << 2; + addr = pv_add_constant (regs[ARM_SP_REGNUM], offset); + + if (pv_area_store_would_trash (stack, addr)) + break; + + pv_area_store (stack, addr, 4, regs[regno]); } - else if (findmask == (4+2+1)) + else { - /* We have found one of each type of prologue instruction */ + /* We don't know what this instruction is. We're finished + scanning. NOTE: Recognizing more safe-to-ignore + instructions here will improve support for optimized + code. */ break; } - else - /* Something in the prolog that we don't care about or some - instruction from outside the prolog scheduled here for - optimization. */ - continue; + + start += 2; } - return current_pc; + if (cache == NULL) + { + do_cleanups (back_to); + return start; + } + + /* frameoffset is unused for this unwinder. */ + cache->frameoffset = 0; + + if (pv_is_register (regs[ARM_FP_REGNUM], ARM_SP_REGNUM)) + { + /* Frame pointer is fp. Frame size is constant. */ + cache->framereg = ARM_FP_REGNUM; + cache->framesize = -regs[ARM_FP_REGNUM].k; + } + else if (pv_is_register (regs[THUMB_FP_REGNUM], ARM_SP_REGNUM)) + { + /* Frame pointer is r7. Frame size is constant. */ + cache->framereg = THUMB_FP_REGNUM; + cache->framesize = -regs[THUMB_FP_REGNUM].k; + } + else if (pv_is_register (regs[ARM_SP_REGNUM], ARM_SP_REGNUM)) + { + /* Try the stack pointer... this is a bit desperate. */ + cache->framereg = ARM_SP_REGNUM; + cache->framesize = -regs[ARM_SP_REGNUM].k; + } + else + { + /* We're just out of luck. We don't know where the frame is. */ + cache->framereg = -1; + cache->framesize = 0; + } + + for (i = 0; i < 16; i++) + if (pv_area_find_reg (stack, gdbarch, i, &offset)) + cache->saved_regs[i].addr = offset; + + do_cleanups (back_to); + return start; } /* Advance the PC across any function entry prologue instructions to @@ -337,10 +410,6 @@ arm_skip_prologue (CORE_ADDR pc) } } - /* Check if this is Thumb code. */ - if (arm_pc_is_thumb (pc)) - return thumb_skip_prologue (pc, func_end); - /* Can't find the prologue end in the symbol table, try it the hard way by disassembling the instructions. */ @@ -348,6 +417,10 @@ arm_skip_prologue (CORE_ADDR pc) if (func_end == 0 || func_end > pc + 64) func_end = pc + 64; + /* Check if this is Thumb code. */ + if (arm_pc_is_thumb (pc)) + return thumb_analyze_prologue (current_gdbarch, pc, func_end, NULL); + for (skip_pc = pc; skip_pc < func_end; skip_pc += 4) { inst = read_memory_unsigned_integer (skip_pc, 4); @@ -462,86 +535,8 @@ thumb_scan_prologue (CORE_ADDR prev_pc, struct arm_prologue_cache *cache) prologue_end = min (prologue_end, prev_pc); - /* Initialize the saved register map. When register H is copied to - register L, we will put H in saved_reg[L]. */ - for (i = 0; i < 16; i++) - saved_reg[i] = i; - - /* Search the prologue looking for instructions that set up the - frame pointer, adjust the stack pointer, and save registers. - Do this until all basic prolog instructions are found. */ - - cache->framesize = 0; - for (current_pc = prologue_start; - (current_pc < prologue_end) && ((findmask & 7) != 7); - current_pc += 2) - { - unsigned short insn; - int regno; - int offset; - - insn = read_memory_unsigned_integer (current_pc, 2); - - if ((insn & 0xfe00) == 0xb400) /* push { rlist } */ - { - int mask; - findmask |= 1; /* push found */ - /* Bits 0-7 contain a mask for registers R0-R7. Bit 8 says - whether to save LR (R14). */ - mask = (insn & 0xff) | ((insn & 0x100) << 6); - - /* Calculate offsets of saved R0-R7 and LR. */ - for (regno = ARM_LR_REGNUM; regno >= 0; regno--) - if (mask & (1 << regno)) - { - cache->framesize += 4; - cache->saved_regs[saved_reg[regno]].addr = -cache->framesize; - /* Reset saved register map. */ - saved_reg[regno] = regno; - } - } - else if ((insn & 0xff00) == 0xb000) /* add sp, #simm OR - sub sp, #simm */ - { - if ((findmask & 1) == 0) /* before push? */ - continue; - else - findmask |= 4; /* add/sub sp found */ - - offset = (insn & 0x7f) << 2; /* get scaled offset */ - if (insn & 0x80) /* is it signed? (==subtracting) */ - { - cache->frameoffset += offset; - offset = -offset; - } - cache->framesize -= offset; - } - else if ((insn & 0xff00) == 0xaf00) /* add r7, sp, #imm */ - { - findmask |= 2; /* setting of r7 found */ - cache->framereg = THUMB_FP_REGNUM; - /* get scaled offset */ - cache->frameoffset = (insn & 0xff) << 2; - } - else if (insn == 0x466f) /* mov r7, sp */ - { - findmask |= 2; /* setting of r7 found */ - cache->framereg = THUMB_FP_REGNUM; - cache->frameoffset = 0; - saved_reg[THUMB_FP_REGNUM] = ARM_SP_REGNUM; - } - else if ((insn & 0xffc0) == 0x4640) /* mov r0-r7, r8-r15 */ - { - int lo_reg = insn & 7; /* dest. register (r0-r7) */ - int hi_reg = ((insn >> 3) & 7) + 8; /* source register (r8-15) */ - saved_reg[lo_reg] = hi_reg; /* remember hi reg was saved */ - } - else - /* Something in the prolog that we don't care about or some - instruction from outside the prolog scheduled here for - optimization. */ - continue; - } + thumb_analyze_prologue (current_gdbarch, prologue_start, prologue_end, + cache); } /* This function decodes an ARM function prologue to determine: diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 68b7c95febd..c3836c75e9c 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,7 @@ +2006-11-22 Daniel Jacobowitz + + * gdb.arch/thumb-prologue.c, gdb.arch/thumb-prologue.exp: New files. + 2006-11-22 Ulrich Weigand * gdb.asm/asm-source.exp: Add "spu*-*-*" target. diff --git a/gdb/testsuite/gdb.arch/thumb-prologue.c b/gdb/testsuite/gdb.arch/thumb-prologue.c new file mode 100644 index 00000000000..f6189634641 --- /dev/null +++ b/gdb/testsuite/gdb.arch/thumb-prologue.c @@ -0,0 +1,96 @@ +/* Unwinder test program. + + Copyright 2006 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +void tpcs_frame (void); + +int +main (void) +{ + tpcs_frame (); + return 0; +} + +/* Normally Thumb functions use r7 as the frame pointer. However, + with the GCC option -mtpcs-frame, they may use fp instead. */ + +asm(".text\n" + " .align 2\n" + " .thumb_func\n" + " .code 16\n" + "tpcs_frame_1:\n" + " sub sp, #16\n" + " push {r7}\n" + " add r7, sp, #20\n" + " str r7, [sp, #8]\n" + " mov r7, pc\n" + " str r7, [sp, #16]\n" + " mov r7, fp\n" + " str r7, [sp, #4]\n" + " mov r7, lr\n" + " str r7, [sp, #12]\n" + " add r7, sp, #16\n" + " mov fp, r7\n" + " mov r7, sl\n" + " push {r7}\n" + + /* Trap. */ + " .short 0xdffe\n" + + " pop {r2}\n" + " mov sl, r2\n" + " pop {r7}\n" + " pop {r1, r2}\n" + " mov fp, r1\n" + " mov sp, r2\n" + " bx lr\n" + + " .align 2\n" + " .thumb_func\n" + " .code 16\n" + "tpcs_frame:\n" + " sub sp, #16\n" + " push {r7}\n" + " add r7, sp, #20\n" + " str r7, [sp, #8]\n" + " mov r7, pc\n" + " str r7, [sp, #16]\n" + " mov r7, fp\n" + " str r7, [sp, #4]\n" + " mov r7, lr\n" + " str r7, [sp, #12]\n" + " add r7, sp, #16\n" + " mov fp, r7\n" + " mov r7, sl\n" + " push {r7}\n" + + /* Clobber saved regs. */ + " mov r7, #0\n" + " mov lr, r7\n" + " bl tpcs_frame_1\n" + + " pop {r2}\n" + " mov sl, r2\n" + " pop {r7}\n" + " pop {r1, r2}\n" + " mov fp, r1\n" + " mov sp, r2\n" + " bx lr\n" +); diff --git a/gdb/testsuite/gdb.arch/thumb-prologue.exp b/gdb/testsuite/gdb.arch/thumb-prologue.exp new file mode 100644 index 00000000000..1353768b267 --- /dev/null +++ b/gdb/testsuite/gdb.arch/thumb-prologue.exp @@ -0,0 +1,60 @@ +# Copyright 2006 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +# Test ARM/Thumb prologue analyzer. + +if {![istarget arm*-*]} then { + verbose "Skipping ARM prologue tests." + return +} + +set testfile "thumb-prologue" +set srcfile ${testfile}.c +set binfile ${objdir}/${subdir}/${testfile} + +# Don't use "debug", so that we don't have line information for the assembly +# fragments. +if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {"additional_flags=-mthumb"}] != "" } { + untested "ARM prologue tests" + return -1 +} + + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +# +# Run to `main' where we begin our tests. +# + +if ![runto_main] then { + untested "ARM prologue tests" + return -1 +} + +# Testcase for TPCS prologue. + +gdb_test "continue" "Program received signal SIG.*" "continue to TPCS" + +gdb_test "backtrace 10" \ + "#0\[ \t\]*$hex in tpcs_frame_1 .*\r\n#1\[ \t\]*$hex in tpcs_frame .*\r\n#2\[ \t\]*$hex in main.*" \ + "backtrace in TPCS" + +gdb_test "info frame" \ + ".*Saved registers:.*r7 at.*r10 at.*r11 at.*lr at.*pc at .*" \ + "saved registers in TPCS"