Andreas Krebbel [Thu, 19 Nov 2015 10:10:06 +0000 (11:10 +0100)]
[S/390] Add null ptr check + port GOTOFF handling from 32 bit over to 64 bit
bfd/ChangeLog:
2015-11-19 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
PR ld/19263
* elf32-s390.c (elf_s390_gc_sweep_hook): Add null ptr check.
* elf64-s390.c (elf_s390_check_relocs): Port the GOTOFF handling
over from the 32 bit code.
(elf_s390_relocate_section): Likewise.
Matthew Wahab [Thu, 19 Nov 2015 09:24:14 +0000 (09:24 +0000)]
[ARM] Add ARMv8.2 architecture feature and command line option.
ARMv8.2 is an architectural extension of ARMv8. This patch adds an
architecture feature macro for ARMv8.2 to the binutils ARM target
with GAS command line option -march=armv8.2-a.
gas/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
Matthew Wahab [Thu, 19 Nov 2015 09:12:49 +0000 (09:12 +0000)]
[AArch64] Add ARMv8.2 command line option and feature flag.
ARMv8.2 is an architectural extension of ARMv8. This patch adds an
architecture feature macro for ARMv8.2 to the binutils AArch64 target
with GAS command line option -march=armv8.2-a.
gas/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
Alan Modra [Thu, 19 Nov 2015 06:23:43 +0000 (16:53 +1030)]
Use default sub-segment align for non-ELF powerpc
Defining this to zero for COFF and PE meant that code sections were
padded with zeros. The fact that no one has complained since 2006
says these targets are dead, I guess.
* config/tc-ppc.h (SUB_SEGMENT_ALIGN): Define only for ELF.
Alan Modra [Thu, 19 Nov 2015 04:30:13 +0000 (15:00 +1030)]
Account for .tbss alignment when adjusting start of relro
Another option might be to not bump "dot" for .tbss alignment in the
main section sizing loop, but that could leak some of the following
section into the TLS segment. Leakage shouldn't matter since it will
be to bytes past the end of .tdata, but for now this is a safer
option.
PR ld/19264
* ldlang.c (lang_size_sections): Don't ignore .tbss when
adjusting start of relro region.
Simon Marchi [Tue, 17 Nov 2015 13:07:24 +0000 (13:07 +0000)]
[C++] Add casts to obstack_base calls
The recent libiberty import of upstream obstack.h (314dee8ea9be) makes
obstack_base return a 'void *', with the consequence that a few places
in gdb need a (char *) cast.
gdb/ChangeLog:
2015-11-18 Simon Marchi <simon.marchi@ericsson.com>
Pedro Alves <palves@redhat.com>
Tristan Gingold [Wed, 18 Nov 2015 14:43:27 +0000 (15:43 +0100)]
mach-o: use a per-target reloc canonicalize function.
bfd/
* mach-o.h (bfd_mach_o_swap_in_non_scattered_reloc)
(bfd_mach_o_canonicalize_non_scattered_reloc)
(bfd_mach_o_pre_canonicalize_one_reloc): Declare.
(bfd_mach_o_backend_data): Rename field
_bfd_mach_o_swap_reloc_in to _bfd_mach_o_canonicalize_one_reloc.
* mach-o.c (bfd_mach_o_swap_in_non_scattered_reloc): Now public.
(bfd_mach_o_canonicalize_non_scattered_reloc): Renames from
bfd_mach_o_canonicalize_one_reloc.
(bfd_mach_o_pre_canonicalize_one_reloc): New function.
(bfd_mach_o_canonicalize_relocs): Adjust.
(bfd_mach_o_canonicalize_relocs): Rename define from
bfd_mach_o_swap_reloc_in.
* mach-o-target.c (TARGET_NAME_BACKEND): Use
bfd_mach_o_canonicalize_one_reloc instead of
bfd_mach_o_swap_reloc_in.
* mach-o-i386.c (bfd_mach_o_i386_canonicalize_one_reloc): Renames
from bfd_mach_o_i386_swap_reloc_in and adjust.
(bfd_mach_o_canonicalize_one_reloc): Renames from
bfd_mach_o_i386_canonicalize_one_reloc.
* mach-o-x86_64.c (bfd_mach_o_x86_64_canonicalize_one_reloc): Renames
from bfd_mach_o_x86_64_swap_reloc_in and adjust.
(bfd_mach_o_canonicalize_one_reloc): Renames from
bfd_mach_o_x86_64_canonicalize_one_reloc.
Pedro Alves [Wed, 18 Nov 2015 13:02:21 +0000 (13:02 +0000)]
[gdbserver/ipa] Fix build dependencies
Commit 91ee7171d088 (MinGW and attribute format(printf/gnu_printf))
made common/common-defs.h depend on gnulib's substitute headers.
Turns out that that broke the gdbserver/ipa build (as the buildbots
discovered) because nothing is making sure that gnulib is built before
the ipa is.
gdb/gdbserver/ChangeLog:
2015-11-18 Pedro Alves <palves@redhat.com>
Yao Qi [Wed, 18 Nov 2015 11:49:32 +0000 (11:49 +0000)]
Fix out of boundary access in pass_in_v
Hi,
I build GDB with -fsanitize=address, and run testsuite. In
gdb.base/callfuncs.exp, I see the following error,
p t_float_values(0.0,0.0)
=================================================================
==8088==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000cb650 at pc 0x6e195c bp 0x7fff164f9770 sp 0x7fff164f9768
READ of size 16 at 0x6020000cb650 thread T0^
#0 0x6e195b in regcache_raw_write /home/yao/SourceCode/gnu/gdb/git/gdb/regcache.c:912
#1 0x6e1e52 in regcache_cooked_write /home/yao/SourceCode/gnu/gdb/git/gdb/regcache.c:945
#2 0x466d69 in pass_in_v /home/yao/SourceCode/gnu/gdb/git/gdb/aarch64-tdep.c:1101
#3 0x467512 in pass_in_v_or_stack /home/yao/SourceCode/gnu/gdb/git/gdb/aarch64-tdep.c:1196
#4 0x467d7d in aarch64_push_dummy_call /home/yao/SourceCode/gnu/gdb/git/gdb/aarch64-tdep.c:1335
The code in pass_in_v read contents from V registers (128 bit), but the
data passed through V registers can be less than 128 bit. In this case,
float is passed. So writing V registers contents into contents buff
will cause overflow. In this patch, we add an array reg[V_REGISTER_SIZE],
which is to hold the contents from V registers, and then copy useful
bits to buf.
Mike Frysinger [Tue, 17 Nov 2015 08:19:56 +0000 (00:19 -0800)]
sim: always enable modulo memory
Having this be a config option doesn't make sense: the code size is
pretty much the same (as all the logic is still active), and if it's
disabled, the sim throws an error if you try to use it. That means
we can't break sims that weren't using it before by enabling it all
the time.
Pedro Alves [Tue, 17 Nov 2015 19:21:21 +0000 (19:21 +0000)]
[sim/ppc] Fix printf_filtered reference
Building a gdb that includes the PPC sim in C++ mode fails to link with:
(...)s.o compile-object-load.o compile-object-run.o compile-loc2c.o compile-c-support.o inflow.o init.o \
../sim/ppc/libsim.a ../readline/libreadline.a ../opcodes/libopcodes.a ../bfd/libbfd.a -lz ../libiberty/libiberty.a ../libdecnumber/libdecnumber.a -ldl -ldl -lncurses -lm -ldl -lguile-2.0 -lgc -lpthread -ldl -lutil -lm -lpython2.7 -Xlinker -export-dynamic -lexpat -llzma -lbabeltrace -lbabeltrace-ctf ../libiberty/libiberty.a build-gnulib/import/libgnu.a
../sim/ppc/libsim.a(sim_calls.o): In function `sim_open':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:73: undefined reference to `printf_filtered'
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:73: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o): In function `sim_close':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:93: undefined reference to `printf_filtered'
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:93: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o): In function `sim_load':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:102: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o):/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:102: more undefined references to `printf_filtered' follow
collect2: error: ld returned 1 exit status
The undefined references come from TRACE macro calls, which expand to
calls to printf_filtered.
But note that the sim's 'printf_filtered' is actually a #define to
'sim_io_printf_filtered', in sim_callbacks.h :
#define printf_filtered sim_io_printf_filtered
AFAICS, this is not meant to call gdb's printf_filtered function. The
ChangeLog entry that added the printf_filtered macro reads:
Tue Jul 30 21:12:24 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
* sim_callbacks.h (sim_io_printf_filtered): Replace
printf_filtered with a local simulator specific version. Add
#define printf_filtered to simplify updating of existing code.
That is, just another incomplete/partial transition. Maybe prior to
1996 this was really meant to call gdb's printf_filtered version.
The reference to printf_filtered appears because sim_calls.c, the
compilation unit that fails to link, has this at the top:
#undef printf_filtered /* blow away the mapping */
works. So those TRACE macros instances in sim_calls.c just happen to
work because gdb is linked in, which satisfies the 'printf_filtered'
reference, when GDB is built in C mode. When built in C++ mode, the
problem is exposed, as GDB's printf_filtered is mangled.
The fix here is to make the TRACE macro call sim_io_printf_filtered
directly.
(Standalone "run" doesn't fail to link simply because the offending
routines are not part of its link.)
sim/ppc/ChangeLog
2015-11-17 Pedro Alves <palves@redhat.com>
GDB resumes the whole process (all threads) rather than the specific
thread for which GDB wants to step over the breakpoint (as shown in [1]).
That is wrong because we resume a single thread and leave others stopped
when doing a normal step over where we temporarily remove the breakpoint,
single-step, reinsert the breakpoint, is that if we let other threads run
in the period while the breakpoint is removed, then these other threads
could miss the breakpoint. Since with displaced stepping, we don't ever
remove the breakpoint, it should be fine to let other threads run. However,
there's another reason that we should not let other threads run: that is
the case where some of those threads are also stopped for a breakpoint that
itself needs to be stepped over. If we just let those threads run, then
they immediately re-trap their breakpoint again.
when displaced stepping is off, GDB behaves correctly, only resumes
the specific thread (as shown in [2]).
The current logic in GDB on deciding the set of threads to resume is:
/* Decide the set of threads to ask the target to resume. */
if ((step || thread_has_single_step_breakpoints_set (tp))
&& tp->control.trap_expected)
{
/* We're allowing a thread to run past a breakpoint it has
hit, by single-stepping the thread with the breakpoint
removed. In which case, we need to single-step only this
thread, and keep others stopped, as they can miss this
breakpoint if allowed to run. */
resume_ptid = inferior_ptid;
}
else
resume_ptid = internal_resume_ptid (user_step);
it doesn't handle the case correctly that GDB continue (instead of
single step) the thread for displaced stepping.
I also update the comment below to reflect the code. I remove the
"with the breakpoint removed" comment, because GDB doesn't remove
breakpoints in displaced stepping, so we don't have to worry that
other threads may miss the breakpoint.
Patch is regression tested on both x86_64-linux and arm-linux.
gdb:
2015-11-17 Yao Qi <yao.qi@linaro.org>
* infrun.c (resume): Check control.trap_expected only
when deciding the set of threads to resume.
Pedro Alves [Tue, 17 Nov 2015 13:12:23 +0000 (13:12 +0000)]
Introduce null_block_symbol
... in the spirit of null_ptid, null_frame_id, etc.
Fixes two instances of:
/root/binutils-gdb/gdb/cp-namespace.c: In function 'block_symbol cp_lookup_nested_symbol(type*, const char*, const block*, domain_enum)':
/root/binutils-gdb/gdb/cp-namespace.c:1010: warning: jump to case label
/root/binutils-gdb/gdb/cp-namespace.c:1008: error: crosses initialization of 'block_symbol <anonymous>'
Compiler info:
Reading specs from /usr/lib/gcc-lib/amd64-unknown-openbsd5.8/4.2.1/specs
Target: amd64-unknown-openbsd5.8
Configured with: OpenBSD/amd64 system compiler
Thread model: posix
gcc version 4.2.1 20070719
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* cp-namespace.c (cp_lookup_bare_symbol)
(cp_search_static_and_baseclasses, cp_lookup_symbol_via_imports)
(cp_lookup_symbol_via_all_imports, cp_lookup_nested_symbol_1)
(cp_lookup_nested_symbol): Use null_block_symbol.
* d-namespace.c (d_lookup_symbol, d_lookup_nested_symbol)
(d_lookup_symbol_imports, d_lookup_symbol_module): Use
null_block_symbol.
* symtab.c (null_block_symbol): New global.
* symtab.h (null_block_symbol): Declare.
Pedro Alves [Tue, 17 Nov 2015 15:17:46 +0000 (15:17 +0000)]
[C++] Always use setjmp/longjmp for exceptions
We currently throw exceptions from signal handlers (e.g., for
Quit/ctrl-c). But throwing C++ exceptions from signal handlers is
undefined. (That doesn't restore signal masks, like siglongjmp does,
and, because asynchronous signals can arrive at any instruction, we'd
have to build _everything_ with -fasync-unwind-tables to make it
reliable.) It happens to work on x86_64 GNU/Linux at least, but it's
likely broken on other ports.
Until we stop throwing from signal handlers, use setjmp/longjmp based
exceptions in C++ mode as well.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
Pedro Alves [Tue, 17 Nov 2015 15:17:45 +0000 (15:17 +0000)]
MinGW and attribute format(printf/gnu_printf)
Cross building gdbserver for --host=x86_64-w64-mingw32 with gcc 4.8.4 20141219 (Fedora MinGW 4.8.4-1.fc20), I get:
src/gdb/gdbserver/tracepoint.c: In function 'cmd_qtdp':
src/gdb/gdbserver/tracepoint.c:2577:7: error: unknown conversion type character 'l' in format [-Werror=format=]
trace_debug ("Defined %stracepoint %d at 0x%s, "
^
src/gdb/gdbserver/tracepoint.c:2577:7: error: unknown conversion type character 'l' in format [-Werror=format=]
src/gdb/gdbserver/tracepoint.c:2577:7: error: too many arguments for format [-Werror=format-extra-args]
src/gdb/gdbserver/tracepoint.c: In function 'stop_tracing':
src/gdb/gdbserver/tracepoint.c:3447:7: error: unknown conversion type character 'l' in format [-Werror=format=]
trace_debug ("Stopping the trace because "
^
src/gdb/gdbserver/tracepoint.c:3447:7: error: too many arguments for format [-Werror=format-extra-args]
src/gdb/gdbserver/tracepoint.c: In function 'collect_data_at_tracepoint':
src/gdb/gdbserver/tracepoint.c:4651:3: error: unknown conversion type character 'l' in format [-Werror=format=]
trace_debug ("Making new traceframe for tracepoint %d at 0x%s, hit %" PRIu64,
^
src/gdb/gdbserver/tracepoint.c:4651:3: error: too many arguments for format [-Werror=format-extra-args]
src/gdb/gdbserver/tracepoint.c: In function 'collect_data_at_step':
src/gdb/gdbserver/tracepoint.c:4687:3: error: unknown conversion type character 'l' in format [-Werror=format=]
trace_debug ("Making new step traceframe for "
^
gnulib's stdio/printf module replacements may make %llu, etc. work on
mingw, instead of the MS-specific %I64u, and thus may make PRIu64
expand to %llu. However, gcc isn't aware of that, because libiberty's
ansidecl.h defines ATTRIBUTE_PRINTF as using attribute format(printf).
But, with that format, gcc checks for MS-style format strings (%I64u).
In order to have gcc expect gnu/standard formats, we need to use
gnu_printf format instead. Which version to use (printf/gnu_printf)
depends on msvcrt and mingw version, and so gnulib has a
configure-time check, and defines _GL_ATTRIBUTE_FORMAT_PRINTF
accordingly.
Since _GL_ATTRIBUTE_FORMAT_PRINTF is compatible with ATTRIBUTE_PRINTF,
the fix is simply to make use of the former.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* common/common-defs.h (ATTRIBUTE_PRINTF): Redefine in terms of
_GL_ATTRIBUTE_FORMAT_PRINTF after including ansidecl.h.
Pedro Alves [Tue, 17 Nov 2015 15:17:45 +0000 (15:17 +0000)]
[C++] Define __STDC_CONSTANT_MACROS / __STDC_LIMIT_MACROS for stdint.h
With some toolchains, building in C++ mode stumbles on many instances
of:
In file included from ../../src/gdb/../include/splay-tree.h:43:0,
from ../../src/gdb/dcache.c:26:
build-gnulib/import/inttypes.h:61:3: error: #error "This file assumes that 'int' has exactly 32 bits. Please report your platform and compiler to <bug-gnulib@gnu.org>."
# error "This file assumes that 'int' has exactly 32 bits. Please report your platform and compiler to <bug-gnulib@gnu.org>."
^
make: *** [dcache.o] Error 1
That's:
#if !(INT_MIN == INT32_MIN && INT_MAX == INT32_MAX)
# error "This file assumes that 'int' has exactly 32 bits. Please report your platform and compiler to <bug-gnulib@gnu.org>."
#endif
I see it when cross building for --host=x86_64-w64-mingw32 using
Fedora 20's g++ (gcc version 4.8.4 20141219 (Fedora MinGW
4.8.4-1.fc20)), Simon reports seeing this on several cross compilers
too.
The issue is that on some hosts that predate C++11, when using C++ one
must define __STDC_CONSTANT_MACROS/__STDC_LIMIT_MACROS to make visible
the definitions of INTMAX_C / INTMAX_MAX etc.
This was a C99 requirement that later C++11 -- the first to define
stdint.h -- removed, and then C11 removed it as well.
https://www.gnu.org/software/gnulib/manual/html_node/stdint_002eh.html
says that gnulib's stdint.h fixes this, but because we run gnulib's
configure tests with a C compiler, gnulib determines that mingw's
stdint.h is C99-compliant, and doesn't actually replace it. Actually,
even though configuring gnulib with a C++ compiler does result in
gnulib replacing stdint.h, the resulting replacement is broken for
mingw, because it defines uintptr_t incorrectly. I sent a gnulib
patch upstream to fix that, here:
but then even with that, gnulib still stumbles on other
configured-with-C++-compiler problems.
So for now, until gnulib + C++ is fixed upstream and then gdb's copy
is updated, which may take a while, I think it's best to keep
configuring gnulib in C, and define
__STDC_LIMIT_MACROS/__STDC_CONSTANT_MACROS ourselves, just like C99
intended.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* common/common-defs.h (__STDC_CONSTANT_MACROS)
(__STDC_LIMIT_MACROS): Define before including stdint.h.
Pedro Alves [Tue, 17 Nov 2015 15:17:45 +0000 (15:17 +0000)]
[C++/mingw] Simplify first chance exception handling
Building in C++ errors out with:
../../src/gdb/windows-nat.c: In function 'int get_windows_debug_event(target_ops*, int, target_waitstatus*)':
../../src/gdb/windows-nat.c:1503:13: warning: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
last_sig = 1;
^
../../src/gdb/windows-nat.c:1533:43: warning: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
windows_resume (ops, minus_one_ptid, 0, 1);
^
../../src/gdb/windows-nat.c:1228:1: warning: initializing argument 4 of 'void windows_resume(target_ops*, ptid_t, int, gdb_signal)' [-fpermissive]
windows_resume (struct target_ops *ops,
^
Looking at the code, I can't figure out why we treat first chance
exceptions any different here.
AFAICS, we set last_sig to 1, and then call windows_resume passing
signal==1, so the DBG_EXCEPTION_NOT_HANDLED code path in win32_resume
is taken:
~~~
if (sig != GDB_SIGNAL_0)
{
if (current_event.dwDebugEventCode != EXCEPTION_DEBUG_EVENT)
{
OUTMSG (("Cannot continue with signal %d here.\n", sig));
}
else if (sig == last_sig)
continue_status = DBG_EXCEPTION_NOT_HANDLED;
else
OUTMSG (("Can only continue with recieved signal %d.\n", last_sig));
}
~~~
Fix this by removing this special casing. gdbserver also goes
straight to continuing with DBG_EXCEPTION_NOT_HANDLED, AFAICS.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* windows-nat.c (handle_exception): Return 0 for first chance
exceptions.
(get_windows_debug_event): Adjust.
Pedro Alves [Tue, 17 Nov 2015 15:17:45 +0000 (15:17 +0000)]
[C++/mingw] gdbserver: gdb/host signal mixup
Building in C++ caught a buglet here:
../../../src/gdb/gdbserver/win32-low.c: In function 'void win32_resume(thread_resume*, size_t)':
../../../src/gdb/gdbserver/win32-low.c:929:11: error: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
sig = resume_info[0].sig;
^
../../../src/gdb/gdbserver/win32-low.c:934:11: error: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
sig = 0;
^
Signals in the "struct thread_resume" structure are host signals, not
gdb signals. The current code happens to work because the only
signals that the Windows port supports have the same number as the gdb
equivalent (see handle_exception for the win32 exception -> gdb signal
mapping).
gdb/gdbserver/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* win32-low.c (win32_resume): Use gdb_signal_from_host,
GDB_SIGNAL_0 and gdb_signal_to_string.
Pedro Alves [Tue, 17 Nov 2015 15:17:45 +0000 (15:17 +0000)]
[C++/mingw] handle_output_debug_string
Fixes:
../../../src/gdb/gdbserver/win32-low.c: In function 'int win32_kill(int)':
../../../src/gdb/gdbserver/win32-low.c:823:46: error: invalid conversion from 'int' to 'target_waitkind' [-fpermissive]
struct target_waitstatus our_status = { 0 };
^
handle_output_debug_string doesn't use the parameter for anything
(it's an output parameter in the gdb version), so just remove it.
gdb/gdbserver/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* win32-low.c (handle_output_debug_string): Remove parameter.
(win32_kill): Remove our_status local and adjust call to
handle_output_debug_string.
(get_child_debug_event): Adjust call to
handle_output_debug_string.
Pedro Alves [Tue, 17 Nov 2015 15:17:44 +0000 (15:17 +0000)]
[C++/mingw] windows-nat.c casts
Fixes a set of errors like:
../../src/gdb/windows-nat.c: In function 'void _initialize_loadable()':
../../src/gdb/windows-nat.c:2778:30: error: invalid conversion from 'void*' to 'BOOL (*)(DWORD) {aka int (*)(long unsigned int)}' [-fpermissive]
DebugActiveProcessStop = (void *)
^
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* windows-nat.c (AdjustTokenPrivileges_ftype)
(DebugActiveProcessStop_ftype, DebugBreakProcess_ftype)
(DebugSetProcessKillOnExit_ftype, EnumProcessModules_ftype)
(GetCurrentConsoleFont_ftype, GetModuleInformation_ftype)
(LookupPrivilegeValueA_ftype, OpenProcessToken_ftype)
(GetConsoleFontSize_ftype): New typedefs.
(AdjustTokenPrivileges, DebugActiveProcessStop)
(DebugBreakProcess, DebugSetProcessKillOnExit, EnumProcessModules)
(GetConsoleFontSize, GetCurrentConsoleFont, GetModuleInformation)
(LookupPrivilegeValueA, OpenProcessToken, GetConsoleFontSize):
Adjust.
(GetModuleFileNameEx_ftype): New typedef.
(GetModuleFileNameEx): Use it.
(_initialize_loadable): Define GPA macro and use it.
Simon Marchi [Tue, 17 Nov 2015 13:31:29 +0000 (13:31 +0000)]
Convert c_string_type to an enum flags type
c_string_type contains values meant to be OR'ed together (even though
some bits are mutually exclusive), so it makes sense to make it an
enum flags type.
gdb/ChangeLog:
2015-11-17 Simon Marchi <simon.marchi@ericsson.com>
* c-exp.y (exp): Adjust, change enum c_string_type to
c_string_type.
(parse_string_or_char): Likewise.
* c-lang.c (charset_for_string_type): Likewise.
(classify_type): Likewise.
(c_printchar): Likewise.
(c_printstr): Likewise.
(evaluate_subexp_c): Likewise. And change cast to enum
c_string_type_values.
* c-lang.h: Include "common/enum_flags.h".
(enum c_string_type): Rename to...
(enum c_string_type_values): ...this.
(c_string_type): Define new enum flags type.
Pedro Alves [Tue, 17 Nov 2015 13:31:29 +0000 (13:31 +0000)]
Type-safe wrapper for enum flags
This patch fixes C++ build errors like this:
/home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive]
| COREFILTER_HUGETLB_PRIVATE);
^
This is a case of enums used as bit flags. Unlike "regular" enums,
these values are supposed to be or'ed together. However, in C++, the
type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to
an enum variable without a cast. That means that this:
enum foo_flags flags = 0;
if (...)
flags |= FOO_FLAG1;
if (...)
flags |= FOO_FLAG2;
... would have to be written as:
enum foo_flags flags = (enum foo_flags) 0;
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG1);
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG2);
which is ... ugly. Alternatively, we'd have to use an int for the
variable's type, which isn't ideal either.
This patch instead adds an "enum flags" class. "enum flags" are
exactly the enums where the values are bits that are meant to be ORed
together.
This allows writing code like the below, while with raw enums this
would fail to compile without casts to enum type at the assignments to
'f':
some_flags f = flag_val1 | flag_val2;
f |= flag_val3;
It's also possible to assign literal zero to an enum flags variable
(meaning, no flags), dispensing either adding an awkward explicit "no
value" value to the enumeration or the cast to assignments from 0.
For example:
some_flags f = 0;
f |= flag_val3 | flag_val4;
Note that literal integers other than zero do fail to compile:
some_flags f = 1; // error
C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that
case.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* btrace.h: Include common/enum-flags.h.
(btrace_insn_flags): Define.
(struct btrace_insn) <flags>: Change type.
(btrace_function_flags): Define.
(struct btrace_function) <flags>: Change type.
(btrace_thread_flags): Define.
(struct btrace_thread_info) <flags>: Change type.
* c-exp.y (token_flags): Rename to ...
(token_flag): ... this.
(token_flags): Define.
(struct token) <flags>: Change type.
* common/enum-flags.h: New file.
* compile/compile-c-types.c (convert_qualified): Change type of
'quals' local.
* compile/compile-internal.h: Include "common/enum-flags.h".
(gcc_qualifiers_flags): Define.
* completer.c (enum reg_completer_targets): Rename to ...
(enum reg_completer_target): ... this.
(reg_completer_targets): Define.
(reg_or_group_completer_1): Change type of 'targets' parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Change type
of 'psl_flags' local.
(do_mixed_source_and_assembly): Change type of 'psl_flags' local.
* infrun.c: Include "common/enum-flags.h".
(enum step_over_what): Rename to ...
(enum step_over_what_flag): ... this.
(step_over_what): Change type.
(start_step_over): Change type of 'step_what' local.
(thread_still_needs_step_over): Now returns a step_over_what.
Adjust.
(keep_going_pass_signal): Change type of 'step_what' local.
* linux-tdep.c: Include "common/enum-flags.h".
(enum filterflags): Rename to ...
(enum filter_flag): ... this.
(filter_flags): Define.
(dump_mapping_p): Change type of 'filterflags' parameter.
(linux_find_memory_regions_full): Change type of 'filterflags'
local.
(linux_find_memory_regions_full): Pass the address of an unsigned
int to sscanf instead of the address of an enum.
* record-btrace.c (btrace_print_lines): Change type of local
'psl_flags'.
(btrace_call_history): Replace 'flags' parameter
with 'int_flags' parameter. Adjust.
(record_btrace_call_history, record_btrace_call_history_range)
(record_btrace_call_history_from): Rename 'flags' parameter to
'int_flags'. Use record_print_flags.
* record.h: Include "common/enum-flags.h".
(record_print_flags): Define.
* source.c: Include "common/enum-flags.h".
(print_source_lines_base, print_source_lines): Change type of
flags parameter.
* symtab.h: Include "common/enum-flags.h".
(enum print_source_lines_flags): Rename to ...
(enum print_source_lines_flag): ... this.
(print_source_lines_flags): Define.
(print_source_lines): Change prototype.
Pedro Alves [Tue, 17 Nov 2015 13:31:28 +0000 (13:31 +0000)]
guile disassembly hardcode TARGET_XFER_E_IO
Instead of adding a cast at the memory_error call, as needed for C++,
and have the reader understand the indirection, make it simple and
hardcode the generic memory error at the memory_error call site.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* guile/scm-disasm.c (gdbscm_disasm_read_memory): Return -1 on
error instead of TARGET_XFER_E_IO.
(gdbscm_disasm_memory_error): Always pass TARGET_XFER_E_IO to
memory_error.
Mike Frysinger [Sun, 15 Nov 2015 07:46:03 +0000 (02:46 -0500)]
gas: microblaze: fix shift overflow
This code tries to shift an integer 31 bits which triggers a werror:
gas/config/tc-microblaze.c:742:21: error: integer overflow in expression [-Werror=overflow]
e->X_add_number |= -(1 << 31);
Cast the 1 to offsetT to match X_add_number to fix things.
Yao Qi [Mon, 16 Nov 2015 15:37:03 +0000 (15:37 +0000)]
Fix stack buffer overflow in aarch64_extract_return_value
Hi,
I build GDB with -fsanitize=address, and run testsuite. In
gdb.base/callfuncs.exp, I see the following error,
p/c fun1()
=================================================================^M
==9601==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fffee858530 at pc 0x6df079 bp 0x7fffee8583a0 sp 0x7fffee858398
WRITE of size 16 at 0x7fffee858530 thread T0
#0 0x6df078 in regcache_raw_read /home/yao/SourceCode/gnu/gdb/git/gdb/regcache.c:673
#1 0x6dfe1e in regcache_cooked_read /home/yao/SourceCode/gnu/gdb/git/gdb/regcache.c:751
#2 0x4696a3 in aarch64_extract_return_value /home/yao/SourceCode/gnu/gdb/git/gdb/aarch64-tdep.c:1708
#3 0x46ae57 in aarch64_return_value /home/yao/SourceCode/gnu/gdb/git/gdb/aarch64-tdep.c:1918
We are extracting return value from V registers (128 bit), but only
allocate X_REGISTER_SIZE-byte array, which isn't sufficient. This
patch changes the array to V_REGISTER_SIZE.
gdb:
2015-11-16 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_extract_return_value): Change array
buf's length to V_REGISTER_SIZE.
Yao Qi [Mon, 16 Nov 2015 14:50:29 +0000 (14:50 +0000)]
Pass value * instead of bfd_byte * to pass_* functions in aarch64-tdep.c
This patch changes the last argument of functions pass_in_x_or_stack,
pass_in_v_or_stack, pass_on_stack, and pass_in_x to type value *.
gdb:
2015-11-16 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (pass_in_x_or_stack): Change argument type
from bfd_byte * to value *. Caller updated.
(pass_in_x): Likewise.
(pass_in_v_or_stack): Likewise.
(pass_on_stack): Likewise.
Yao Qi [Mon, 16 Nov 2015 14:47:50 +0000 (14:47 +0000)]
Use value_contents instead of value_contents_writeable
Both aarch64_push_dummy_call and bfin_push_dummy_call only use args[i]
contents but then never write to them, so that we can use
value_contents instead.
Yao Qi [Mon, 16 Nov 2015 14:44:19 +0000 (14:44 +0000)]
Fix bug in arm_push_dummy_call by -fsanitize=address
When I build GDB with -fsanitize=address, and run testsuite,
some gdb.base/*.exp test triggers the ERROR below,
=================================================================
==7646==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000242810 at pc 0x487844 bp 0x7fffe32e84e0 sp 0x7fffe32e84d8
READ of size 4 at 0x603000242810 thread T0
#0 0x487843 in push_stack_item /home/yao/SourceCode/gnu/gdb/git/gdb/arm-tdep.c:3405
#1 0x48998a in arm_push_dummy_call /home/yao/SourceCode/gnu/gdb/git/gdb/arm-tdep.c:3960
In that path, GDB passes value on stack, in an INT_REGISTER_SIZE slot,
but the value contents' length can be less than INT_REGISTER_SIZE, so
the contents will be accessed out of the bound. This patch adds an
array buf[INT_REGISTER_SIZE], and copy val to buf before writing them
to stack.
gdb:
2015-11-16 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_push_dummy_call): New array buf. Store regval
to buf. Pass buf instead of val to push_stack_item.
Mike Frysinger [Mon, 16 Nov 2015 04:06:42 +0000 (20:06 -0800)]
sim: sim-stop/sim-reason/sim-reg: move to common obj list
Now that all arches (for the most part) have moved over, move sim-stop.o,
sim-reason.o, and sim-reg.o to the common object list and out of all the
arch ports.
Mike Frysinger [Sun, 15 Nov 2015 11:07:06 +0000 (03:07 -0800)]
sim: cr16: convert to common sim engine logic
Now that we have access to the sim state everywhere, we can convert to
the common engine logic for overall processing. This frees us up from
tracking exception state ourselves.
Mike Frysinger [Sun, 15 Nov 2015 23:57:10 +0000 (15:57 -0800)]
sim: cr16: convert to common sim memory modules
The cr16 port has a lot of translation/offset logic baked into it, but
it all looks like copy & paste from the d10v port rather than something
the cr16 port wants.
Mike Frysinger [Sun, 15 Nov 2015 10:57:42 +0000 (02:57 -0800)]
sim: cr16: push down sd/cpu vars
By itself, this commit doesn't really change anything. It lays the
groundwork for using the cpu state in follow up commits, both for
engine state and for cpu state. Splitting things up this way so it
is easier to see how things have changed.
Mike Frysinger [Sun, 15 Nov 2015 11:07:06 +0000 (03:07 -0800)]
sim: d10v: convert to common sim engine logic
Now that we have access to the sim state everywhere, we can convert to
the common engine logic for overall processing. This frees us up from
tracking exception state ourselves.
Mike Frysinger [Sun, 15 Nov 2015 10:57:42 +0000 (02:57 -0800)]
sim: d10v: push down sd/cpu vars
By itself, this commit doesn't really change anything. It lays the
groundwork for using the cpu state in follow up commits, both for
engine state and for cpu state. Splitting things up this way so it
is easier to see how things have changed.
Mike Frysinger [Sun, 15 Nov 2015 08:42:33 +0000 (00:42 -0800)]
sim: mcore: pull cpu state out of global scope
This avoids using global variables to hold the cpu state so we can
better integrate with the sim common code.
There's also a minor fix here where we move the pc register back into
the state that is accessible by the asints array. When it was pulled
out previously, the reg store/fetch functions broke, but no one really
noticed as the mcore gdb port was dropped a while back.
Mike Frysinger [Sun, 15 Nov 2015 08:17:02 +0000 (00:17 -0800)]
sim: mcore: switch to common sim-reg
This is not entirely useful as mcore doesn't (yet) store its register
state in the cpu state, but it does allow for switching to the common
code for these functions.
Mike Frysinger [Mon, 23 Mar 2015 03:10:09 +0000 (23:10 -0400)]
sim: sim-close: unify sim_close logic
Other than the nice advantage of all sims having to declare one fewer
common function, this also fixes leakage in pretty much every sim.
Many were not freeing any resources, and a few were inconsistent as
to the ones they did. Now we have a single module that takes care of
all the logic for us.
Most of the non-cgen based ones could be deleted outright. The cgen
ones required adding a callback to the arch-specific cleanup func.
The few that still have close callbacks are to manage their internal
state.
We do not convert erc32, m32c, ppc, rl78, or rx as they do not use
the common sim core.
Mike Frysinger [Mon, 9 Nov 2015 06:14:57 +0000 (01:14 -0500)]
sim: testsuite: support basic vars in flags
Sometimes in tests, we need supplemental files like linker scripts or
board helper files. There's no way to set those flags in the tests
currently and relative paths don't work (breaks out of tree builds).
Update the main option parser to replace some strings on the fly. Now
tests can do things like:
Long term we'll want to switch the framework to use the dejagnu helpers
like dg-xxx that gcc & gdb utilize. But that'll require more rework.
Yao Qi [Fri, 13 Nov 2015 15:11:58 +0000 (15:11 +0000)]
PR 19051: support of inferior call with gnu vector support on ARM
This patch teaches GDB to support gnu vector in inferior calls. As a
result, fails in gdb.base/gnu_vector.exp are fixed. The calling
convention of gnu vector isn't documented in the AAPCS, because it
is the GCC extension. I checked the gcc/config/arm/arm.c, understand
how GCC pass arguments and return values, and do the same in GDB side.
The patch is tested with both hard float and soft float on arm-linux.
gdb:
2015-11-13 Yao Qi <yao.qi@linaro.org>
PR tdep/19051
* arm-tdep.c (arm_type_align): Return the right alignment
value for vector.
(arm_vfp_cprc_sub_candidate): Return true for 64-bit and
128-bit vector types.
(arm_return_in_memory): Handel vector type.
Yao Qi [Fri, 13 Nov 2015 15:11:58 +0000 (15:11 +0000)]
Refactor arm_return_in_memory
Current arm_return_in_memory isn't friendly to adding new things in it.
Moreover, a lot of stuff are about APCS, which is not used nowadays (AAPCS
is being used). This patch is to refactor arm_return_in_memory, so that
some code can be shared for both APCS and AAPCS at the beginning of
arm_return_in_memory, and then each ABI (APCS and AAPCS) are processed
separately.
gdb:
2015-11-13 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_return_in_memory): Rewrite it.
(arm_return_value): Call arm_return_in_memory for
TYPE_CODE_COMPLEX.
Yao Qi [Fri, 13 Nov 2015 15:06:38 +0000 (15:06 +0000)]
Remove d10v from testsuite
This patch removes the leftover of the d10v stuff in the testsuite
directory. The d10v port was removed in GDB 6.7, but I happen to see
that there are still some leftovers about d10v in testsuite.
gdb/testsuite:
2015-11-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/call-sc.exp (test_scalar_returns): Remove the
comments about d10v.
(test_scalar_returns): Likewise.
* gdb.base/d10v.ld: Remove.
* gdb.base/overlays.exp: Remove the target triplet checking for
d10v-*-*.
* gdb.base/structs.exp (test_struct_returns): Remove the
comments about d10v.
(test_struct_calls): Likewise.
Yao Qi [Fri, 13 Nov 2015 15:03:25 +0000 (15:03 +0000)]
gdb.base/gnu_vector.exp: Don't test output from the inferior
gdb.base/gnu_vector.c printf the vector and gdb.base/gnu_vector.exp
expects the output by gdb_test_multiple. Nowadays, the test doesn't
expect the output from inferior_spawn_id, which is wrong. Even we
change the test to expect from inferior_spawn_id for the inferior
output, it is still possible the inferior exit before tcl/expect gets
the inferior output. We see this fail on both s390x-linux and
ppc-linux on buildbot,
FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
In order to address these two shortcomings above in gnu_vector.exp,
this patch rewrites the test a little bit. Get rid of checking the
inferior output, and instead checking them by printing them. In this
way, the test can also be run on the target without inferior io
(gdb,noinferiorio is set in the board file).
gdb/testsuite:
2015-11-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/gnu_vector.exp: Check the return value by "p res".
* gdb.base/gnu_vector.c: Don't include stdio.h.
(main): Don't print res and call add_some_intvecs.
James Greenhalgh [Thu, 12 Nov 2015 12:04:22 +0000 (12:04 +0000)]
[AArch64] Add support for Cortex-A35
This patch adds support to the AArch64 back-end for the Cortex-A35
processor, as recently announced by ARM. The ARM Cortex-A35 provides
full support for the ARMv8-A architecture, including the CRC extension,
with optional Advanced-SIMD and Floating-Point support. We therefore set
feature flags for this CPU to AARCH64_ARCH_V8 and AARCH64_FEATURE_CRC, in
the same fashion as Cortex-A53 and Cortex-A57.
Tested in a cross environment for AArch64 with no issues.
The assembly code for emitting the proper tracepointable instruction
was duplicated in many places. Keep it in one place, to reduce work
needed for new targets.
gdb/testsuite/ChangeLog:
* gdb.trace/change-loc.h: include "trace-common.h", remove SYMBOL
macro.
(func5): Removed.
(func4): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/ftrace-lock.c: include "trace-common.h", remove SYMBOL
macro.
(func): Removed.
(thread_function): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/ftrace.c: include "trace-common.h", remove SYMBOL macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/pendshr1.c: include "trace-common.h", remove SYMBOL macro.
(pendfunc1): Remove.
(pendfunc): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/pendshr2.c: include "trace-common.h", remove SYMBOL macro.
(foo): Remove.
(pendfunc2): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-break.c: include "trace-common.h", remove SYMBOL
macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-common.h: New header.
* gdb.trace/trace-condition.c: include "trace-common.h", remove SYMBOL
macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-mt.c: include "trace-common.h", remove SYMBOL macro.
(func): Remove.
(thread_function): Use FAST_TRACEPOINT_LABEL.
projects / thirdparty / binutils-gdb.git / log
