Simon Marchi [Tue, 25 Oct 2022 04:11:29 +0000 (00:11 -0400)]
gdb: internal_error -> internal_error_loc in gdb-gdb.gdb.in
Commit f34652de0b ("internal_error: remove need to pass
__FILE__/__LINE__") renamed the internal_error function to
internal_error_loc. Change gdb-gdb.gdb.in accordingly.
Nelson Chu [Mon, 24 Oct 2022 10:26:36 +0000 (18:26 +0800)]
RISC-V: Should reset `again' flag for _bfd_riscv_relax_pc.
The R_RISCV_DELETE relocations are no longer deleted at another relax pass,
so we should reset 'again' flag to true for _bfd_riscv_relax_pc, while the
deleted bytes are marked as R_RISCV_DELETE.
bfd/
* elfnn-riscv.c (_bfd_riscv_relax_pc): Set `again' to true while the
deleted bytes are marked as R_RISCV_DELETE.
Patrick O'Neill [Mon, 17 Oct 2022 01:37:35 +0000 (09:37 +0800)]
RISC-V: Improve link time complexity.
The riscv port does deletion and symbol table update for each relocation
while relaxing, so we are moving section bytes and scanning symbol table once
for each relocation. Compared to microblaze port, they record the relaxation
changes into a table, then do the deletion and symbol table update once per
section, rather than per relocation. Therefore, they should have better link
time complexity than us.
To improve the link time complexity, this patch try to make the deletion in
linear time. Compared to record the relaxation changes into a table, we
replace the unused relocation with R_RISCV_DELETE for the deleted bytes, and
then resolve them at the end of the section. Assuming the number of
R_RISCV_DELETE is m, and the number of symbols is n, the total link complexity
should be O(m) for moving section bytes, and O(m*n^2) for symbol table update.
If we record the relaxation changes into the table, and then sort the symbol
table by values, then probably can reduce the time complexity to O(m*n*log(n))
for updating symbol table, but it doesn't seem worth it for now.
bfd/
* elfnn-riscv.c (_riscv_relax_delete_bytes): Renamed from
riscv_relax_delete_bytes, updated to reduce the tiem complexity to O(m)
for memmove.
(typedef relax_delete_t): Function pointer declaration of delete functions.
(riscv_relax_delete_bytes): Can choose to use _riscv_relax_delete_piecewise
or _riscv_relax_delete_immediate for deletion.
(_riscv_relax_delete_piecewise): Just mark the deleted bytes as R_RISCV_DELETE.
(_riscv_relax_delete_immediate): Delete some bytes from a section while
relaxing.
(riscv_relax_resolve_delete_relocs): Delete the bytes for R_RISCV_DELETE
relocations from a section, at the end of _bfd_riscv_relax_section.
(_bfd_riscv_relax_call): Mark deleted bytes as R_RISCV_DELETE by reusing
R_RISCV_RELAX.
(_bfd_riscv_relax_lui): Likewise, but reuse R_RISCV_HI20 for lui, and reuse
R_RISCV_RELAX for c.lui.
(_bfd_riscv_relax_tls_le): Likewise, but resue R_RISCV_TPREL_HI20 and
R_RISCV_TPREL_ADD.
(_bfd_riscv_relax_pc): Likewise, but resue R_RISCV_PCREL_HI20 for auipc.
(_bfd_riscv_relax_align): Updated, don't need to resue relocation since
calling _riscv_relax_delete_immediate.
(_bfd_riscv_relax_delete): Removed.
(_bfd_riscv_relax_section): Set riscv_relax_delete_bytes for each relax_func,
to delete bytes immediately or later. Call riscv_relax_resolve_delete_relocs
to delete bytes for DELETE relocations from a section.
Andrew Burgess [Wed, 19 Oct 2022 14:31:28 +0000 (15:31 +0100)]
sim/lm32: fix some missing function declaration warnings
In the lm32 simulator, I was seeing some warnings about missing
function declarations.
The lm32 simulator has a weird header structure, in order to pull in
the full cpu.h header we need to define WANT_CPU_LM32BF. This is done
in some files, but not in others. Critically, it's not done in some
files that then use functions declared in cpu.h
In this commit I added the missing #define so that the full cpu.h can
be included.
After doing this there are still a few functions that are used
undeclared, these functions appear to be missing any declarations at
all, so I've added some to cpu.h.
With this done all the warnings when compiling lm32 are resolved for
both gcc and clang, so I've removed the SIM_WERROR_CFLAGS line from
Makefile.in, this allows lm32 to build with -Werror.
Andrew Burgess [Wed, 19 Oct 2022 14:19:18 +0000 (15:19 +0100)]
sim/h8300: avoid self assignment
There are two places in the h8300 simulator where we assign a variable
to itself. Clang gives a warning for this, which is converted into an
error by -Werror.
Silence the warning by removing the self assignments. As these
assignments were in a complex if/then/else tree, rather than try to
adjust all the conditions, I've just replaced the self assignments
with a comment and an empty statement.
operator '?:' has lower precedence than '+'; '+' will be evaluated first
I suspect that this is not the original authors intention.
PPC_ONE_BIT_SET_P is going to be 0 or 1, so if we evaluate the '+'
first, the condition will always be non-zero, so true. The whole
expression could then be simplified to just '1', which doesn't make
much sense.
I suspect the answer the author was expecting was either 2 or 3. Why
they didn't just write:
Andrew Burgess [Wed, 19 Oct 2022 14:07:40 +0000 (15:07 +0100)]
sim/ppc: initialize a memory buffer in all cases
In the ppc simulator's do_fstat function, which provides the fstat
call for the simulator, if the fstat is going to fail then we
currently write an uninitialized buffer into the simulated target.
In theory, I think this is fine, we also write the error status into
the simulated target, so, given that the fstat has failed, the target
shouldn't be relying on the buffer contents.
However, writing an uninitialized buffer means we might leak simulator
private data into the simulated target, which is probably a bad thing.
Plus it probably makes life easier if something consistent, like all
zeros, is written rather than random junk, which might look like a
successful call (except for the error code).
So, in this commit, I initialize the stat buffer to zero before
it is potentially used. If the stat call is not made then the buffer
will be left initialized as all zeros.
Clément Chigot [Thu, 20 Oct 2022 13:32:00 +0000 (15:32 +0200)]
ld/testsuite: adjust ld-arm to run shared tests only when supported
If a custom arm-elf target is disabling the shared support, a lot of
failures are reported by the testsuite.
Moreover, some tests try to access libraries which have been explicitly
skipped earlier (eg mixed-lib.so).
ld/ChangeLog:
* testsuite/ld-arm/arm-elf.exp: Separate tests needing shared
lib support.
Jan Beulich [Mon, 24 Oct 2022 07:34:23 +0000 (09:34 +0200)]
x86: consolidate VPCLMUL tests
There's little point in having Intel syntax disassembler tests when the
purpose of a test is assembler functionality: Drop all
*avx512*_vpclmulqdq-wig1-intel.
For *avx512*_vpclmulqdq-wig1 share source with *avx512*_vpclmulqdq.
Finally put in place similar tests for -mvexwig=1.
Jan Beulich [Mon, 24 Oct 2022 07:32:59 +0000 (09:32 +0200)]
x86: consolidate VAES tests
There's little point in having Intel syntax disassembler tests when the
purpose of a test is assembler functionality: Drop all
*avx512*_vaes-wig1-intel.
For *avx512*_vaes-wig1 share source with *avx512*_vaes. This in
particular makes sure that the 32-bit VL test actually tests any EVEX
encodings in the first place.
Finally put in place similar tests for -mvexwig=1.
Jan Beulich [Mon, 24 Oct 2022 07:30:58 +0000 (09:30 +0200)]
x86: emit {evex} prefix when disassembling ambiguous AVX512VL insns
When no AVX512-specific functionality is in use, the disassembly of
AVX512VL insns is indistinguishable from their AVX counterparts (if such
exist). Emit the {evex} pseudo-prefix in such cases.
Where applicable drop stray uses of PREFIX_OPCODE from table entries.
Make sure we invoke runtest with the same exp filenames when running in
parallel as it will find when run single threaded. When `runtest` finds
files itself, it will use paths like "aarch64/allinsn.exp". When we run
`find .` with the %p option, it produces "./aarch64/allinsn.exp". Switch
to %P to get "aarch64/allinsn.exp".
These configure scripts check $target and change behavior. They
shouldn't be doing that, but until we can rework the sim to change
behavior based on the input ELF, restore AC_CANONICAL_SYSTEM to
these so that $target is correctly populated.
This was lost in the d3562f83a7b8a1ae6e333cd5561419d3da18fcb4
("sim: unify toolchain probing logic") refactor as the logic was
hoisted up to the common code. But the fact the vars weren't
passed down to the sub-configure scripts was missed.
Simon Marchi [Sat, 22 Oct 2022 03:58:15 +0000 (23:58 -0400)]
gdb/testsuite: add max number of instructions check in gdb.base/unwind-on-each-insn.exp
This test sends my CI in an infinite loop of failures. We expect to
have a handful of iterations (5 on my development machine, where the
test passes fine)but the log shows that it went up to 104340 iterations:
Add a max instruction check, exit the loop if we reach 100 iterations.
This should allow the test to fail fast if there's a problem, but 100
iterations should be more than enough for when things are working.
This patch fixes the problem by introducing the idea of a "type
declaration". I think gdb still needs to recurse into these types,
searching for methods, but by marking the type itself as a
declaration, gdb can skip this type during lookups and when writing
the index.
Regression tested on x86-64 using the cc-with-gdb-index board.
Tom Tromey [Tue, 27 Sep 2022 18:53:25 +0000 (12:53 -0600)]
Fix crash in value_print_array_elements
A user noticed that gdb would crash when printing a packed array after
doing "set lang c". Packed arrays don't exist in C, but it's
occasionally useful to print things in C mode when working in a non-C
language -- this lets you see under the hood a little bit.
The bug here is that generic value printing does not handle packed
arrays at all. This patch fixes the bug by introducing a new function
to extract a value from a bit offset and width.
The new function includes a hack to avoid problems with some existing
test cases when using -fgnat-encodings=all. Cleaning up this code
looked difficult, and since "all" is effectively deprecated, I thought
it made sense to simply work around the problems.
Tom Tromey [Tue, 20 Sep 2022 14:39:09 +0000 (08:39 -0600)]
Fix bug in Ada packed array handling
A user found a bug where an array of packed arrays was printed
incorrectly. The bug here is that the packed array has a bit stride,
but the outer array does not -- and should not. However,
update_static_array_size does not distinguish between an array of
packed arrays and a multi-dimensional packed array, and for the
latter, only the innermost array will end up with a stride.
This patch fixes the problem by adding a flag to indicate whether a
given array type is a constituent of a multi-dimensional array.
Nick Clifton [Fri, 21 Oct 2022 11:20:09 +0000 (12:20 +0100)]
Add a -w option to the linker to suppress warning and error messages.
PR 29654
* ld.h (struct ld_config_type): Add no_warnings field.
* ldlex.h (enum option_values): Add OPTION_NO_WARNINGS.
* lexsup.c (ld_options): Add --no-warnings.
(parse_args): Add support for -w and --no-warnings.
* ldmisc.c (vfinfo): Return early if the message is a warning and
-w has been enabled.
* ld.texi (options): Document new command line option.
* NEWS: Mention the new feature.
Bruno Larsen [Wed, 25 May 2022 18:02:47 +0000 (15:02 -0300)]
gdb/reverse: Fix stepping over recursive functions
Currently, when using GDB to do reverse debugging, if we try to use the
command "reverse next" to skip a recursive function, instead of skipping
all of the recursive calls and stopping in the previous line, we stop at
the second to last recursive call, and need to manually step backwards
until we leave the first call. This is well documented in PR gdb/16678.
This bug happens because when GDB notices that a reverse step has
entered into a function, GDB will add a step_resume_breakpoint at the
start of the function, then single step out of the prologue once that
breakpoint is hit. The problem was happening because GDB wouldn't give
that step_resume_breakpoint a frame-id, so the first time the breakpoint
was hit, the inferior would be stopped. This is fixed by giving the
current frame-id to the breakpoint.
This commit also changes gdb.reverse/step-reverse.c to contain a
recursive function and attempt to both, skip it altogether, and to skip
the second call from inside the first call, as this setup broke a
previous version of the patch.
Bruno Larsen [Fri, 19 Aug 2022 13:11:28 +0000 (15:11 +0200)]
Change calculation of frame_id by amd64 epilogue unwinder
When GDB is stopped at a ret instruction and no debug information is
available for unwinding, GDB defaults to the amd64 epilogue unwinder, to
be able to generate a decent backtrace. However, when calculating the
frame id, the epilogue unwinder generates information as if the return
instruction was the whole frame.
This was an issue especially when attempting to reverse debug, as GDB
would place a step_resume_breakpoint from the epilogue of a function if
we were to attempt to skip that function, and this breakpoint should
ideally have the current function's frame_id to avoid other problems
such as PR record/16678.
This commit changes the frame_id calculation for the amd64 epilogue,
so that it is always the same as the dwarf2 unwinder's frame_id.
It also adds a test to confirm that the frame_id will be the same,
regardless of using the epilogue unwinder or not, thanks to Andrew
Burgess.
Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
GDB/Python: Make `None' stand for `unlimited' in setting integer parameters
Similarly to booleans and following the fix for PR python/29217 make
`gdb.parameter' accept `None' for `unlimited' with parameters of the
PARAM_UINTEGER, PARAM_INTEGER, and PARAM_ZUINTEGER_UNLIMITED types, as
`None' is already returned by parameters of the two former types, so
one might expect to be able to feed it back. It also makes it possible
to avoid the need to know what the internal integer representation is
for the special setting of `unlimited'.
Expand the testsuite accordingly.
Approved-By: Simon Marchi <simon.marchi@polymtl.ca>
GDB/testsuite: Expand Python integer parameter coverage across all types
Also verify PARAM_UINTEGER, PARAM_INTEGER, and PARAM_ZINTEGER parameter
types, in addition to PARAM_ZUINTEGER and PARAM_ZUINTEGER_UNLIMITED
already covered, and verify a choice of existing GDB parameters. Add
verification for reading parameters via `<parameter>.value' in addition
to `gdb.parameter('<parameter>')' as this covers different code paths.
Approved-By: Simon Marchi <simon.marchi@polymtl.ca>
GDB/Guile: Don't assert that an integer value is boolean
Do not assert that a value intended for an integer parameter, of either
the PARAM_UINTEGER or the PARAM_ZUINTEGER_UNLIMITED type, is boolean,
causing error messages such as:
ERROR: In procedure make-parameter:
ERROR: In procedure gdbscm_make_parameter: Wrong type argument in position 15 (expecting integer or #:unlimited): 3
Error while executing Scheme code.
when initialization with a number is attempted. Instead assert that it
is integer. Keep matching `#:unlimited' keyword as an alternative. Add
suitable test cases.
Approved-By: Simon Marchi <simon.marchi@polymtl.ca>
Tom de Vries [Fri, 21 Oct 2022 06:36:18 +0000 (08:36 +0200)]
[gdb/testsuite] Silence compilation fail in gdb.base/rtld-step.exp
With gcc 7.5.0 and test-case gdb.base/rtld-step.exp, I run into:
...
gdb compile failed, gcc: error: unrecognized command line option \
'-static-pie'; did you mean '-static'?
...
Silence this by checking in the test-case that -static-pie is supported, and
emitting instead:
...
UNTESTED: gdb.base/rtld-step.exp: \
failed to compile (-static-pie not supported or static libc missing)
...
Tested on x86_64-linux, with:
- gcc 7.5.0: UNTESTED
- gcc 12.2.1 with static glibc not installed: UNTESTED
- gcc 12.2.1 with static glibc installed: PASS
Tsukasa OI [Mon, 10 Oct 2022 09:24:48 +0000 (09:24 +0000)]
sim: Remove unused CXXFLAGS substitution
Not only that sim/configure.ac does not AC_SUBST CXXFLAGS,
unless we need C++ compiler like CXX, substitution @CXXFLAGS@ is useless.
Because of this, this commit removes this substitution.
moved AVX-VNNI after AVX512-VNNI, vector Disp8 is applied even when VEX
encoding is selected. Check VEX/EVEX encoding before checking vector
operands to avoid vector Disp8 with VEX encoding.
Andrew Burgess [Wed, 21 Sep 2022 15:23:02 +0000 (16:23 +0100)]
gdb/python: break more dependencies between gdbpy_initialize_* functions
In a later commit in this series I will propose removing all of the
explicit gdbpy_initialize_* calls from python.c and replace these
calls with a more generic mechanism.
One of the side effects of this generic mechanism is that the order in
which the various Python sub-systems within GDB are initialized is no
longer guaranteed.
On the whole I don't think this matters, most of the sub-systems are
independent of each other, though testing did reveal a few places
where we did have dependencies, though I don't think those
dependencies were explicitly documented in comment anywhere.
This commit is similar to the previous one, and fixes the second
dependency issue that I found.
In this case the finish_breakpoint_object_type uses the
breakpoint_object_type as its tp_base, this means that
breakpoint_object_type must have been initialized with a call to
PyType_Ready before finish_breakpoint_object_type can be initialized.
Previously we depended on the ordering of calls to
gdbpy_initialize_breakpoints and gdbpy_initialize_finishbreakpoints in
python.c.
After this commit a new function gdbpy_breakpoint_init_breakpoint_type
exists, this function ensures that breakpoint_object_type has been
initialized, and can be called from any gdbpy_initialize_* function.
I feel that this change makes the dependency explicit, which I think
is a good thing.
There should be no user visible changes after this commit.
Andrew Burgess [Wed, 21 Sep 2022 13:40:30 +0000 (14:40 +0100)]
gdb/python: break dependencies between gdbpy_initialize_* functions
In a later commit in this series I will propose removing all of the
explicit gdbpy_initialize_* calls from python.c and replace these
calls with a more generic mechanism.
One of the side effects of this generic mechanism is that the order in
which the various Python sub-systems within GDB are initialized is no
longer guaranteed.
On the whole I don't think this matters, most of the sub-systems are
independent of each other, though testing did reveal a few places
where we did have dependencies, though I don't think those
dependencies were explicitly documented in a comment anywhere.
This commit removes the first dependency issue, with this and the next
commit, all of the implicit inter-sub-system dependencies will be
replaced by explicit dependencies, which will allow me to, I think,
clean up how the sub-systems are initialized.
The dependency is around the py_insn_type. This type is setup in
gdbpy_initialize_instruction and used in gdbpy_initialize_record.
Rather than depend on the calls to these two functions being in a
particular order, in this commit I propose adding a new function
py_insn_get_insn_type. This function will take care of setting up the
py_insn_type type and calling PyType_Ready. This helper function can
be called from gdbpy_initialize_record and
gdbpy_initialize_instruction, and the py_insn_type will be initialized
just once.
To me this is better, the dependency is now really obvious, but also,
we no longer care in which order gdbpy_initialize_record and
gdbpy_initialize_instruction are called.
There should be no user visible changes after this commit.
Andrew Burgess [Tue, 4 Oct 2022 13:13:53 +0000 (14:13 +0100)]
gdb: some int to bool conversion in breakpoint.c
Some int to bool conversion in breakpoint.c. I've only updated the
function signatures of static functions, but I've updated some
function local variables throughout the file.
There should be no user visible changes after this commit.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Andrew Burgess [Wed, 5 Oct 2022 09:21:02 +0000 (10:21 +0100)]
gdb: make use of scoped_restore in unduplicated_should_be_inserted
I noticed that we could make use of a scoped_restore in the function
unduplicated_should_be_inserted. I've also converted the function
return type from int to bool.
This change shouldn't make any difference, as I don't think anything
within should_be_inserted could throw an exception, but the change
doesn't hurt, and will help keep us safe if anything ever changes in
the future.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Andrew Burgess [Tue, 4 Oct 2022 13:22:25 +0000 (14:22 +0100)]
gdb: used scoped_restore_frame in update_watchpoint
I was doing some int to bool cleanup in update_watchpoint, and I
noticed a manual version of scoped_restore_selected_frame. As always
when these things are done manually, there is the chance that, in an
error case, we might leave the wrong frame selected.
This commit updates things to use scoped_restore_selected_frame, and
also converts a local variable from int to bool.
The only user visible change after this commit is in the case where
update_watchpoint throws an error - we should now correctly restore
the previously selected frame. Otherwise, this commit should be
invisible to the user.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Дилян Палаузов [Thu, 20 Oct 2022 15:05:04 +0000 (17:05 +0200)]
Reapply "Don't build readline/libreadline.a, when --with-system-readline is supplied"
Commit 228cf97dd3c8 ("Merge configure.ac from gcc project") undid the
change originally done in commit 69961a84c9b ("Don't build
readline/libreadline.a, when --with-system-readline is supplied").
Re-apply it.
Jan Beulich [Thu, 20 Oct 2022 08:01:12 +0000 (10:01 +0200)]
x86: re-work AVX-VNNI support
By putting the templates after their AVX512 counterparts, the AVX512
flavors will be picked by default. That way the need to always use {vex}
ceases to exist once respective CPU features (AVX512-VNNI or AVX512VL as
a whole) have been disabled. This way the need for the PseudoVexPrefix
attribute also disappears.
Tom de Vries [Thu, 20 Oct 2022 07:50:04 +0000 (09:50 +0200)]
[gdb/testsuite] Fix gdb.debuginfod/fetch_src_and_symbols.exp with check-read1
With test-case gdb.debuginfod/fetch_src_and_symbols.exp and check-read1, I run
into:
...
(gdb) FAIL: gdb.debuginfod/fetch_src_and_symbols.exp: local_url: \
file fetch_src_and_symbols (got interactive prompt)
...
The problem is that this output:
...
Enable debuginfod for this session? (y or [n]) y^M
...
is matched using regexp "Enable debuginfod?.*" with matches only the first two
words of the output, after which an implicit clause in gdb_test_multiple triggers
on the second part containing the interactive prompt.
Fix this by included the interactive prompt in the regexp.
Tom de Vries [Thu, 20 Oct 2022 07:02:18 +0000 (09:02 +0200)]
[gdb/testsuite] Fix gdb.mi/mi-disassemble.exp with check-read1
With test-case gdb.mi/mi-disassemble.exp and check-read1 I run into:
...
FAIL: gdb.mi/mi-disassemble.exp: disassemble /b main
FAIL: gdb.mi/mi-disassemble.exp: get valueof "*((unsigned char *) 0x400549)"
...
The problem for both FAILs is that the output is parsed using
gdb_test_multiple, which has implicit clauses using $gdb_prompt, which can
match before the explicit clauses using $mi_gdb_prompt.
Fix this by passing -prompt "$mi_gdb_prompt$" to gdb_test_multiple.
It's also been tested (and found to be working) with
RUNTESTFLAGS="CC_FOR_TARGET=clang" on all of the above expect for
Fedora 28. The (old) version of clang available on F28 did not
accept the -static-pie option.
I also tried to make this test work on FreeBSD 13.1. While I think I
made significant progress, I was ultimately stymied by this message
which occurs when attempting to run the main program which has been
set to use the fake/pretend RTLD as the ELF interpreter:
ELF interpreter /path/to/rtld-step-rtld not found, error 22
I have left one of the flags (-static) in place which I believe
to be needed for FreeBSD (though since I never got it to work, I
don't know for sure.) I've also left some declarations needed
for FreeBSD in rtld-step-rtld.c. They're currently disabled via
a #if 0; you'll need to enable them if you want to try to make
it work on FreeBSD.
Kevin Buettner [Thu, 20 Oct 2022 02:36:07 +0000 (19:36 -0700)]
Allow debugging of runtime loader / dynamic linker
At present, GDB does not allow for the debugging of the runtime loader
and/or dynamic linker. Much of the time, this makes sense. An
application programmer doesn't normally want to see symbol resolution
code when stepping into a function that hasn't been resolved yet.
But someone who wishes to debug the runtime loader / dynamic linker
might place a breakpoint in that code and then wish to debug it
as normal. At the moment, this is not possible. Attempting to step
will cause GDB to internally step (and not stop) until code
unrelated to the dynamic linker is reached.
This commit makes a minor change to infrun.c which allows the dynamic
loader / linker to be debugged in the case where a step, next, etc.
is initiated from within that code.
While developing this fix, I tried some approaches which weren't quite
right. The GDB testusite definitely contains tests which FAIL when
it's done incorrectly. (At one point, I saw 17 regressions!) This
commit has been tested on x86-64 linux with no regressions.
Tsukasa OI [Mon, 10 Oct 2022 09:23:16 +0000 (09:23 +0000)]
binutils: Remove unused substitution PROGRAM
Unlike other substitution, this substitution of @PROGRAM@ was done in
binutils/Makefile and it was intended for binutils/cxxfilt.man. @PROGRAM@
in binutils/cxxfilt.man is removed in the commit 0285c67df190 ("Automate
generate on man pages") in 2001 and @PROGRAM@ is ineffective since then.
Because PROGRAM substitution does nothing, removing this manual
substitution should be completely safe.
Tom de Vries [Wed, 19 Oct 2022 15:41:47 +0000 (17:41 +0200)]
[gdb] Fix assert in handle_jit_event
With the cc-with-tweaks.sh patch submitted here (
https://sourceware.org/pipermail/gdb-patches/2022-October/192586.html ) we run
with:
...
$ export STRIP_ARGS_STRIP_DEBUG=--strip-all
$ make check RUNTESTFLAGS="gdb.base/jit-reader.exp \
--target_board cc-with-gnu-debuglink"
...
into the following assert:
...
(gdb) run ^M
Starting program: jit-reader ^M
gdb/jit.c:1247: internal-error: jit_event_handler: \
Assertion `jiter->jiter_data != nullptr' failed.^M
...
Fix this by handling the
jit_bp_sym.objfile->separate_debug_objfile_backlink != nullptr case in
handle_jit_event.
The need to pass in explicit __FILE__/__LINE__ is there probably
because the function predates widespread and portable variadic macros
availability. We can use variadic macros nowadays, and in fact, we
already use them in several places, including the related
gdb_assert_not_reached.
So this patch renames the internal_error function to something else,
and then reimplements internal_error as a variadic macro that expands
__FILE__/__LINE__ itself.
The result is that we now should call internal_error like so:
internal_error ("foo %d", var);
Likewise for internal_warning.
The patch adjusts all calls sites. 99% of the adjustments were done
with a perl/sed script.
The non-mechanical changes are in gdbsupport/errors.h,
gdbsupport/gdb_assert.h, and gdb/gdbarch.py.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Change-Id: Ia6f372c11550ca876829e8fd85048f4502bdcf06
Andrew Burgess [Wed, 12 Oct 2022 11:46:42 +0000 (12:46 +0100)]
sim/iq2000: silence pointer-sign warnings
When building the iq2000 simulator I see a few warnings like this:
/tmp/build/sim/../../src/sim/iq2000/iq2000.c: In function ‘fetch_str’:
/tmp/build/sim/../../src/sim/iq2000/iq2000.c:50:54: error: pointer targets in passing argument 3 of ‘sim_read’ differ in signedness [-Werror=pointer-sign]
50 | sim_read (CPU_STATE (current_cpu), CPU2DATA(addr), buf, nr);
| ^~~
| |
| char *
I've silenced these warnings by casting buf to 'unsigned char *'.
With this change I now see no warnings when compiling iq2000.c, so
I've removed the line from Makefile.in that disables -Werror.
Makefile.in was also disabling -Werror when compiling mloop.c,
however, I'm not seeing any warnings when compiling that file, so I've
removed the -Werror disable in that case too.
Andrew Burgess [Wed, 12 Oct 2022 10:14:26 +0000 (11:14 +0100)]
sim/ppc: mark device_error function as ATTRIBUTE_NORETURN
The device_error function always ends up calling the error function,
which is itself marked as ATTRIBUTE_NORETURN, so it makes sense that
device_error should also be marked ATTRIBUTE_NORETURN.
Doing this resolves a few warnings from hw_ide.c about possibly
uninitialized variables - the variables are only uninitialized after
passing through a call to device_error, which obviously means the
variables are never really used uninitialized, the simulation will
terminate with the device_error call.
sim/ppc: fixes for arguments to printf style functions
where commit 182421c9d2ee addressed issues with printf format
arguments that were causing the compiler to give an error, this commit
addresses issues that caused the compiler to emit a warning.
This commit is mostly either changing the format string to match the
argument, or in some cases, excess, unused arguments are removed.
Andrew Burgess [Wed, 12 Oct 2022 10:07:24 +0000 (11:07 +0100)]
sim/cgen: mask uninitialized variable warning in cgen-run.c
I see an uninitialized variable warning (with gcc 9.3.1) from
cgen-run.c, like this:
/tmp/build/sim/../../src/sim/cris/../common/cgen-run.c: In function ‘sim_resume’:
/tmp/build/sim/../../src/sim/cris/../common/cgen-run.c:259:5: warning: ‘engine_fns$’ may be used uninitialized in this function [-Wmaybe-uninitialized]
259 | (* engine_fns[next_cpu_nr]) (cpu);
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/build/sim/../../src/sim/cris/../common/cgen-run.c:232:14: note: ‘engine_fns$’ was declared here
232 | ENGINE_FN *engine_fns[MAX_NR_PROCESSORS];
| ^~~~~~~~~~
This is a false positive - we over allocate engine_fn, and then only
initialize the nr_cpus entries which we will later go on to use.
However, we can easily silence this warning by initializing the unused
entries in engine_fns to NULL, this might also help if anyone ever
looks at engine_fns in a debugger, it should now be obvious which
entries are in use, and which are not.
With this change the warning is gone.
There should be no change in behaviour with this commit.
Alan Modra [Wed, 19 Oct 2022 08:22:43 +0000 (18:52 +1030)]
Fix addr2line test for ppc64 elfv1 and mingw
* testsuite/binutils-all/addr2line.exp: Tidy. For powerpc64
arrange to pass --synthetic to nm, and extract .main and .fn
symbol address for addr2line test. Handle default executable
extension on cygwin/mingw compilers.
Andrew Burgess [Sun, 2 Oct 2022 14:31:16 +0000 (15:31 +0100)]
gdb/testsuite: avoid temporary file in gdb/testsuite (unittest.exp)
I spotted that the gdb.gdb/unittest.exp script causes a temporary file
inserters_extractors-2.txt to be created in build/gdb/testsuite/
instead of in build/gdb/testsuite/output/gdb.gdb/unittest/.
This is because some of the 'maint selftest' tests create temporary
files in GDB's current directory, specifically, the two source files:
both create a temporary file called inserters_extractors-2.txt, though
we only run the second of these as part of GDB's selftests.
I initially proposed just using GDB's 'cd' command in unittest.exp to
switch to the test output directory before running the selftests,
however, Pedro pointed out that there was a risk here that, if GDB
crashed during shutdown, the generated core file would be left in the
test output directory rather than in the testsuite directory. As a
result, our clever core file spotting logic would fail to spot the
core file and alert the user.
Instead, I propose this slightly more involved solution. I've added a
new with_gdb_cwd directory proc, used like this:
with_gdb_cwd $directory {
# Tests here...
}
The new proc temporarily switches to $directory and then runs the
tests within the block. After running the tests the previous current
working directory is restored.
Additionally, after switching back to the previous cwd, we check that
GDB is still responsive. This means that if GDB crashed immediately
prior to restoring the previous directory, and left the core file in
the wrong place, then the responsiveness check will fail, and a FAIL
will be emitted, this should be enough to alert the user that
something has gone wrong.
With this commit in place the unittest.exp script now leaves its
temporary file in the test output directory.
Andrew Burgess [Sun, 2 Oct 2022 14:18:15 +0000 (15:18 +0100)]
gdb/testsuite: avoid creating files in gdb/testsuite directory
I spotted that the test gdb.dwarf2/dw2-using-debug-str.exp was
creating an output file called debug_str_section in the root
build/gdb/testsuite directory instead of using the
build/gdb/testsuite/output/gdb.dwarf2/dw2-using-debug-str/ directory.
This appears to be caused by a missing '$' character. We setup a
variable debug_str_section which contains a path within the output
directory, but then when we build the objcopy command we use
'debug_str_section' without a '$' prefix, as a result, we create the
debug_str_section file.
This commit adds the missing '$', the file is now created in the
output directory.
It appears that bfd/Makefile.in and bfd/configure were not regenerated
correctly. The differences in the configure file are only whitespace,
but in Makefile.in a critical reference to pe-aarch64.lo was missing.
Andreas Krebbel [Wed, 19 Oct 2022 07:03:17 +0000 (09:03 +0200)]
IBM zSystems: Issue error for *DBL relocs on misaligned symbols
Relocs like PC32DBL require a right shift of the symbol value. There
is no situation where dropping symbol value bits with the right shift
is a good thing. Hence we now issue an error to detect such problems.
Simon Marchi [Tue, 18 Oct 2022 14:17:33 +0000 (10:17 -0400)]
gdb: check for groups with duplicate names in reggroups:add
In the downstream ROCm GDB port, we would create multiple register
groups with duplicate names. While it did not really hurt, it certainly
wasn't the intent. And I don't think it ever makes sense to do so.
To catch these, change the assert in reggroups::add to check for
duplicate names. It's no longer necessary to check for duplicate
reggroup pointers, because adding the same group twice would be caught
by the duplicate name check.
Change-Id: Id216a58acf91f1b314d3cba2d02de73656f8851d Approved-By: Tom Tromey <tom@tromey.com>
Tom Tromey [Sun, 5 Jun 2022 16:22:40 +0000 (10:22 -0600)]
Remove dead code from py-finishbreakpoint.c
PR python/16324 points out that comparing a frame id to null_frame_id
can never succeed, and proposes simply removing the dead code. That
is what this patch does.
Carl Love [Tue, 18 Oct 2022 15:25:36 +0000 (11:25 -0400)]
Update tests to use skip_hw_watchpoint_tests to test for HW watchpoint support.
The hardware watchpoint check has been updated in a couple of recent
patches. This patch updates the hardware watchpoint test in the remaining
gdb tests.
The issue is the PowerPC processors support hardware watchpoints with the
exception of Power 9. The hardware watchpoint support is disabled on
Power 9. The test skip_hw_watchpoint_tests must be used to correctly
determine if the PowerPC processor supports hardware watchpoints.
This patch fixes 6 test failures in test gdb.threads/watchpoint-fork.exp.
Test gdb.base/watch-vfork.exp runs with can-use-hw-watchpoints set to
true and false. When the test is run with can-use-hw-watchpoints set to
true, gdb just falls back to using software watchpoints. The
patch reduces the number of expected passes by 2 since because it now
only runs once with can-use-hw-watchpoints set to false.
Test gdb.mi/mi-watch.exp runs the test with argument hw and sw. If the
argument is hw and hardware watchpoints are not supported the test exits.
The number of expected passes is cut in half with the patch as it now only
runs the test using software breakpoints. Previously the pass to use
hardware watchpoints was not skipped and the test actually ran using
software watchpoints.
The following tests run the same with and without the patch. The tests
are supposed to execute the gdb command "set can-use-hw-watchpoints 0" if
the processor does not support hardware bwatchpoints. However the command
was not being executed and gdb was falling back to using software
watchpoints since the Power 9 watchpoint resource check fails. With the
patch, the tests now execute the command and the test runs using software
watchpoints as it did previously. The tests are:
Tom de Vries [Tue, 18 Oct 2022 13:32:47 +0000 (15:32 +0200)]
[gdb/testsuite] Handle header files with local-remote-host.exp
With test-case gdb.base/included.exp and host board local-remote-host.exp with
tentative fix for PR29697 I run into:
...
included.c:18:10: fatal error: included.h: No such file or directory
#include "included.h"
^~~~~~~~~~~~
compilation terminated.
...
Fix this by adding the missing gdb_remote_download calls.
Tom de Vries [Tue, 18 Oct 2022 13:32:46 +0000 (15:32 +0200)]
[gdb/testsuite] Fix gdb.server/no-thread-db.exp with local-remote-host.exp
With test-case gdb.server/no-thread-db.exp and host board local-remote-host.exp
with a tentative fix for PR29697 I run into:
...
(gdb) print foo^M
Cannot find thread-local storage for Thread 29613.29613, executable file \
$HOME/no-thread-db:^M
Remote target failed to process qGetTLSAddr request^M
(gdb) FAIL: gdb.server/no-thread-db.exp: print foo
...
The regexp in the test-case expects the full $binfile pathname, but we have
instead $HOME/no-thread-db.
Tom de Vries [Tue, 18 Oct 2022 13:32:46 +0000 (15:32 +0200)]
[gdb/testsuite] Fix gdb.server/file-transfer.exp with local-remote-host.exp
When running test-case gdb.server/file-transfer.exp with host
board local-remote-host.exp, I get:
...
Executing on host: cmp -s $outputs/gdb.server/file-transfer/file-transfer \
down-server (timeout = 300)
builtin_spawn [open ...]^M
XYZ2ZYX
FAIL: gdb.server/file-transfer.exp: compare intermediate binary file
...
The remote host and remote target cases are handled here together here in proc
test_file_transfer:
...
if {![is_remote host] && ![is_remote target]} {
set up_server [standard_output_file $up_server]
set down_server [standard_output_file $down_server]
}
...
Tom de Vries [Tue, 18 Oct 2022 13:27:51 +0000 (15:27 +0200)]
[gdb/testsuite] Update boards/README
Update gdb/testsuite/boards/README to reflect recent commit c4c8c27263d
("[gdb/testsuite] Fix host board local-remote-host-notty.exp timeouts"), which
means the board now uses a pseudo-tty, but with editing disabled.
Markus Metzger [Mon, 28 Mar 2022 09:20:10 +0000 (11:20 +0200)]
gdb, solib-svr4: support namespaces in DSO iteration
When looking up names, GDB needs to stay within one linker namespace to
find the correct instance in case the same name is provided in more than
one namespace.
Modify svr4_iterate_over_objfiles_in_search_order() to stay within the
namespace of the current_objfile argument. If no current_objfile is
provided (i.e. it is nullptr), iterate over objfiles in the initial
namespace.
For objfiles that do not have a corresponding so_list to provide the
namespace, assume that the objfile was loaded into the initial namespace.
This would cover the main executable objfile (which is indeed loaded into
the initial namespace) as well as manually added symbol files.
Expected fails:
- gdb.base/non-lazy-array-index.exp: the expression parser may lookup
global symbols, which may result in xfers to read auxv for determining
the debug base as part of svr4_iterate_over_objfiles_in_search_order().
- gdb.server/non-lazy-array-index.exp: symbol lookup may access the
target to read AUXV in order to determine the debug base for SVR4
linker namespaces.
Known issues:
- get_symbol_address() and get_msymbol_address() search objfiles for a
'better' match. This was introduced by
to handle copy relocations but it now causes a wrong address to be
read after symbol lookup actually cound the correct symbol. This can
be seen, for example, with gdb.base/dlmopen.exp when compiled with
clang.
- gnu ifuncs are only looked up in the initial namespace.
- lookup_minimal_symbol() and lookup_minimal_symbol_text() directly
iterate over objfiles and are not aware of linker namespaces.
Markus Metzger [Mon, 30 May 2022 07:35:29 +0000 (09:35 +0200)]
gdb: update gnu ifunc resolve
Update elf_gnu_ifunc_resolve_by_cache() and elf_gnu_ifunc_resolve_by_got()
to use gdbarch_iterate_over_objfiles_in_search_order() in order to
restrict the objfile traversal to the initial namespace.
In order to extend this to other namespaces, we'd need to provide context,
e.g. via an objfile inside that namespace.
There is only one use of find_quick_global_symbol_language that calls it
for the special symbol "main".
Inline the function as it is probably not correct in the general case
where we may have multiple instances of global symbols with the same name
but different languages in different libraries in different linker
namespaces.
Further, change the objfiles iteration into a call to
gdbarch_iterate_over_objfiles_in_search_order, which would only search the
initial linker namespace, where we expect "main" to be located.
projects / thirdparty / binutils-gdb.git / log
