Cary Coutant [Wed, 10 Mar 2010 17:37:11 +0000 (17:37 +0000)]
* fileread.cc (File_read::~File_read): Don't delete whole_file_view_.
(File_read::open[1]): Remove initial mapping of whole_file_view_.
(File_read::open[2]): Add whole_file_view_ to list of views.
(File_read::make_view): Remove test of whole_file_view_.
(File_read::find_or_make_view): Create whole_file_view_ if
necessary.
(File_read::clear_views): Replace bool parameter with enum;
adjust all callers. Don't delete views with permanent data;
do delete cached views and views from archives if
--no-keep-files-mapped is set. Set whole_file_view_ to NULL
if clearing the corresponding view.
* fileread.h (File_read::Clear_views_mode): New enum.
(File_read::View::is_permanent_view): New method.
(File_read::clear_views): Replace bool parameter
with enum; adjust all callers.
* options.h (General_options): Change keep_files_mapped option;
add map_whole_files.
* readsyms.cc (Add_symbols::run): Delete sd_ object before
releasing the file.
* reloc.cc (Scan_relocs::run): Delete rd_ object before releasing
the file.
Pedro Alves [Wed, 10 Mar 2010 13:25:40 +0000 (13:25 +0000)]
gdb/
* breakpoint.c (condition_command): Handle watchpoint conditions.
(is_hardware_watchpoint): Add comment.
(is_watchpoint): New.
(update_watchpoint): Don't reparse the watchpoint's condition
unless necessary.
(WP_IGNORE): New.
(watchpoint_check): Use it.
(bpstat_check_watchpoint): Handle it.
(bpstat_check_breakpoint_conditions): Evaluate watchpoint local
conditions in a frame where it makes sense.
(watch_command_1): Store the innermost block of the condition
expression.
(delete_breakpoint): Delete the watchpoint condition expression.
* breakpoint.h (struct bp_location) <cond>: Update comment.
(struct breakpoint): New fields `cond_exp' and
`cond_exp_valid_block'.
Jie Zhang [Wed, 10 Mar 2010 03:57:00 +0000 (03:57 +0000)]
* doc/as.texinfo: Add Blackfin options.
* doc/c-bfin.texi: Document -mfdpic, -mno-fdpic and -mnopic.
* config/tc-bfin.c (md_show_usage): Show usage for all
Blackfin specific options.
* windows-nat.c (cygwin_conv_path): Redefine to properly convert from/to
posix/win32.
(windows_make_so): Use non-Cygwin 1.7 specific function.
(windows_create_inferior): Make sure that cygallargs points to original args in
non Cygwin 1.7. case.
Keith Seitz [Tue, 9 Mar 2010 18:09:08 +0000 (18:09 +0000)]
dwarf2_physname patchset:
Based on work from Daniel Jacobowitz <dan@codesourcery.com>
* c-typeprint.c (cp_type_print_method_args): For non-static methods,
print out const or volatile qualifiers, too.
(c_type_print_args): Add parameters show_artificial and language.
Skip artificial parameters when requested.
Use the appropriate language printer.
(c_type_print_varspec): Tell c_type_print_args to skip artificial
parameters and pass language_c.
* dwarf2read.c (die_list): New file global.
(struct partial_die_info): Update comments for name field.
(pdi_needs_namespace): Renamed to ...
(die_needs_namespace): ... this. Rewrite.
(dwarf2_linkage_name): Remove.
(add_partial_symbol): Do not predicate the call to
partial_die_full_name based on pdi_needs_namespace.
Remove call to cp_check_possible_namespace_symbols and associated
outdated comments.
(guess_structure_name): Do not inspect child subprogram DIEs.
(dwarf2_fullname): Update comments.
Use die_needs_namespace to assist in computing the name.
(read_func_scope): Use dwarf2_name to get the DIE's name.
Use dwarf2_physname to get the "linkage name" of the DIE.
(dwarf2_add_member_field): Use dwarf2_physname instead of
dwarf2_linkage_name.
(read_structure_type): For structs and classes, set TYPE_NAME, too.
(determine_class): Remove.
(read_partial_die): Ignore DW_AT_MIPS_linkage_name for all languages
except Ada.
(new_symbol): Unconditionally call dwarf2_name.
Compute the "linkage name" using dwarf2_physname.
Use dwarf2_name instead of dwarf2_full_name for enumerator DIEs.
When determining to scan for anonymous C++ namespaces, ignore
the linkage name.
(dwarf2_physname): New function.
(dwarf2_full_name): Move content to new function and call
that.
(dwarf2_compute_name): "New" function.
(_initialize_dwarf2_read): Initialize die_list.
* gnu-v3-eabi.c (gnu_v3_find_method_in): Remove unused variable
physname.
(gnu_v3_print_method_ptr): Use the physname for virtual methods
without a demangled name.
Print out type information for non-virtual methods.
* linespec.c (decode_line_1): Force ANY string using "::" (or
"." for java) to use decode_compound, and clean up any stray quoting.
If we found a file symtab, re-evaluate whether the remainder is_quoted.
(decode_compound): Stop consuming at an open parenthesis.
Keep template parameters.
Keep any overload information.
Keep keywords like "const".
Remove paren_pointer.
Move is_quoted check from set_flags to here.
Remove #if 0 code from 2000. Ten years is long enough.
(find_method): Before comparing symbol names, canonicalize the string
from the user.
If a specific overload is requested, find it. Otherwise throw an error.
(find_method_overload_end): New function.
(set_flags): Remove.
(decode_compound): Assume that parentheses are matched.
It's a lot easier.
* symtab.c (symbol_find_demangled_name): Add DMGL_VERBOSE flag
to cplus_demangle.
* linespec.c (decode_line_1): Keep important keywords like
"const" and "volatile".
* symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME): Remove.
* typeprint.h (c_type_print_args): Add declaration.
* ui-file.c (do_ui_file_obsavestring): New function.
(ui_file_obsavestring): New function.
* ui-file.h (ui_file_obsavestring): Add declaration.
* valops.c (find_overload_match): Resolve the object to
a non-pointer type.
If the object is a data member, search the object for the member
and return with staticp set.
Use SYMBOL_NATURAL_NAME instead of SYMBOL_CPLUS_DEMANGLED_NAME.
Do not attempt to extract a function name from non-function types.
If the extracted function name and the original name are the same,
we don't have a C++ method.
From Jan Kratochvil <jan.kratochvil@redhat.com>:
* dwarf2read.c (new_symbol <DW_TAG_enumerator>): Call dwarf2_full_name.
Keith Seitz [Tue, 9 Mar 2010 18:08:05 +0000 (18:08 +0000)]
* gdb.cp/cp-relocate.exp: Remove single-quoting of C++ methods.
* gdb.cp/cplusfuncs.cc (dm_type_short): New function.
(dm_type_long): New function.
(dm_type_unsigned_short): New function.
(dm_type_unsigned_long): New function.
(myint): New typedef.
* gdb.cp/cplusfuncs.exp (probe_demangler): Add tests for short,
long, unsigned shor and long, operator char*, and typedef.
(test_lookup_operator_functions): Add operator char* test.
(test_paddr_operator_functions): Likewise.
(test_paddr_overloaded_functions): Use probe values for
short, long, and unsigned short and long.
(test_paddr_hairy_functions): If the demangler probe detected
gdb type printers, "expect" them. Otherwise "expect" the v2 or v3
demangler.
* gdb.cp/expand-sals.exp: Backtrace may contain class names.
* gdb.cp/member-ptr.exp: Refine expected result for "print pmf"
and "print null_pmf".
Add test "ptype a.*pmf".
* gdb.cp/overload.exp: Allow optional "int" to appear with
"short" and "long".
* gdb.cp/ovldbreak.exp: Use append to construct super-duper
long expect value for men_overload1arg.
Allow "int" to appear with "short" and "long".
When testing "info break", add argument for main (void).
Also allow "int" to appear with "short" and "long".
Ditto with "unsigned" and "long long".
* gdb.java/jmain.exp: Do not enclose methods names in single
quotes.
* gdb.java/jmisc.exp: Likewise.
* gdb.java/jprint.exp: Likewise.
* gdb.python/py-symbol.exp: Update expected "linkage_name" value.
From Jan Kratochvil <jan.kratochvil@redhat.com>:
* gdb.cp/exception.exp (backtrace after first throw)
(backtrace after second throw): Allow a namespace before __cxa_throw.
(backtrace after first catch, backtrace after second catch): Allow
a namespace before __cxa_begin_catch.
* gdb.cp/cpexprs.exp: New file.
* gdb.cp/cpexprs.cc: New file.
From Daniel Jacobowitz <dan@codesourcery.com>
* gdb.cp/cpexprs.exp (escape): Delete. Change all callers
to use string_to_regexp.
(ctor, dtor): New functions. Use them to match constructor
and destructor function types.
(Top level): Use runto_main.
Doug Kwan [Mon, 8 Mar 2010 22:15:16 +0000 (22:15 +0000)]
2010-03-08 Doug Kwan <dougkwan@google.com>
* gold/arm.cc (Arm_exidx_fixup::update_offset_map): Fix build breakage
due to a conversion warning.
(Arm_relobj::update_output_local_symbol_count): Check for local
symbol with unset output index.
Pedro Alves [Mon, 8 Mar 2010 19:28:27 +0000 (19:28 +0000)]
* solib.c (solib_find): Replace extension if
solib_symbols_extension is set in the target gdbarch.
* arm-symbian-tdep.c (arm_symbian_init_abi): Set
solib_symbols_extension to "sym".
* gdbarch.sh (solib_symbols_extension): New variable.
(pstring): New function.
* gdbarch.h, gdbarch.c: Regenerate.
Kevin Buettner [Mon, 8 Mar 2010 19:06:34 +0000 (19:06 +0000)]
* remote-mips.c (rockhopper_ops): New target_ops struct.
(MON_ROCKHOPPER): New mips_monitor_type.
(read_hex_value): New function.
(mips_request): Send 8-byte values with a 'T' packet. Read the
packet argument as a string and use read_hex_value to parse it.
(mips_exit_debug): Wait for response when using MON_ROCKHOPPER.
(rockhopper_open): New function.
(mips_wait): Read the PC, FP and SP fields as strings. Use
read_hex_value to parse them and mips_set_register to commit them.
(mips_set_register): New function.
(mips_fetch_registers): Do not cast register value to "unsigned"
when reading a MON_ROCKHOPPER 't' packet. Use mips_set_register.
(mips_store_registers): Use a 'T' packet to set registers when
using MON_ROCKHOPPER.
(pmon_end_download): Don't run initEther if using MON_ROCKHOPPER
and expect the total to be printed before the entry address.
(_initialize_remote_mips): Initialize and add rockhopper_ops.
Kevin Buettner [Mon, 8 Mar 2010 18:41:00 +0000 (18:41 +0000)]
* remote-mips.c (mips_fetch_word): Add new parameter, `valp'.
Change return value to int. Store value fetched in location
addressed by `val'. Use function's return value as success
or failure indicator. Adjust all callers.
Kevin Buettner [Mon, 8 Mar 2010 18:22:06 +0000 (18:22 +0000)]
* remote-mips.c (mips_fetch_word): Add new parameter, `valp'.
Change return value to int. Store value fetched in location
addressed by `val'. Use function's return value as success
or failure indicator. Adjust all callers.
* windows-nat.c: Reorganize #ifdef __CYGWIN__ considerations into one block.
Define helper macros to reduce ifdefs in code.
(get_module_name): Use cygwin_buf_t for buffer and __PMAX for buffer size.
Call unadorned GetModuleFileNameEx rather than GetModuleFileNameEx*.
(windows_make_so): Use __PMAX to denote maximum buffer size and cygwin_buf_t
for buffer type. Use GetSystemDirectory{W,A} as appropriate.
(get_image_name): Use __PMAX to denote maximum buffer size.
(handle_load_dll): Likewise.
(windows_pid_to_exec_file): Likewise.
(windows_create_inferior): Add many accommodations for older Cygwin and
non-Cygwin.
(bad_GetModuleFileNameExW): Control inclusion of this function based on
__USEWIDE conditional.
(bad_GetModuleFileNameExA): Likewise.
(_initialize_loadable): Just use real function names without the dyn_ part
since they are defined earlier.
Rainer Orth [Fri, 5 Mar 2010 19:49:00 +0000 (19:49 +0000)]
ld:
* Makefile.am (ALL_EMULATIONS): Add eelf32_sparc_sol2.o,
eelf_i386_sol2.o.
(ALL_64_EMULATIONS): Add eelf_x86_64_sol2.o, eelf64_sparc_sol2.o.
(eelf32_sparc_sol2.c): New rule.
(eelf64_sparc_sol2.c): Likewise.
(eelf_x86_64_sol2.c): Likewise.
(eelf_i386_sol2.c): Likewise.
* Makefile.in: Regenerate.
* configure.tgt (i[3-7]86-*-solaris2*): Change targ_emul to
elf_i386_sol2.
Add elf_i386_ldso, elf_x86_64_sol2 to targ_extra_emuls.
(x86_64-*-solaris2*): Change targ_emul to elf_x86_64_sol2.
Add elf_x86_64, elf_i386_sol2, elf_i386 to targ_extra_emuls.
(sparc-*-solaris2.[0-6]*): Change targ_emul to elf32_sparc_sol2.
Add target_extra_emuls.
(sparc-*-solaris2*): Change targ_emul to elf32_sparc_sol2.
Add elf32_sparc, elf64_sparc_sol2 to targ_extra_emuls.
(sparcv9-*-solaris2*): Change targ_emul to elf64_sparc_sol2.
Add elf64_sparc, elf32_sparc_sol2 to target_extra_emuls.
* emulparams/elf32_sparc_sol2.sh: New file.
* emulparams/elf64_sparc_sol2.sh: New file.
* emulparams/elf_i386_sol2.sh: New file.
* emulparams/elf_x86_64_sol2.sh: New file.
* emultempl/solaris2.em: New file.
bfd:
* elflink.c (bfd_elf_size_dynamic_sections): Don't emit base
version twice.
Skip it when constructing def.vd_next.
* elf32-i386.c (TARGET_LITTLE_SYM): Redefine to
bfd_elf32_i386_sol2_vec.
(TARGET_LITTLE_NAME): Redefine to elf32-i386-sol2.
(elf32_bed): Redefine to elf32_i386_sol2_bed.
(elf_backend_want_plt_sym): Redefine to 1.
* elf64-x86-64.c (TARGET_LITTLE_SYM): Redefine to
bfd_elf64_x86_64_sol2_vec.
(TARGET_LITTLE_NAME): Redefine to elf64-x86-64-sol2.
(elf64_bed): Redefine to elf64_x86_64_sol2_bed.
(elf_backend_want_plt_sym): Redefine to 1.
* config.bfd (i[3-7]86-*-solaris2*): Set targ_defvec to
bfd_elf32_i386_sol2_vec.
Replace bfd_elf64_x86_64_vec by bfd_elf64_x86_64_sol2_vec in
targ64_selvecs.
(x86_64-*-solaris2*): Set targ_defvec to bfd_elf32_i386_sol2_vec.
Replace bfd_elf64_x86_64_vec by bfd_elf64_x86_64_sol2_vec in
targ_selvecs.
Kevin Buettner [Fri, 5 Mar 2010 16:18:54 +0000 (16:18 +0000)]
* remote-mips.c (gdbthread.h): Include.
(remote_mips_ptid): Declare.
(mips_error): Only mourn the inferior when inferior_ptid is non-null.
(common_open): Set inferior_ptid, add it as an inferior, and
as a thread too. Delete FIXME comment regarding start_remote().
(mips_close): Invoke generic_mourn_inferior().
(mips_kill): Make sure that target_mourn_inferior is invoked.
(mips_mourn_inferior): Don't invoke generic_mourn_inferior, as
it's now invoked from mips_close().
(mips_load): Don't null out inferior_ptid. Don't call
clear_symtab_users().
(mips_thread_alive, mips_pid_to_str): New functions.
(_initialize_remote_mips): Initialize remote_mips_ptid. Initialize
to_thread_alive and to_pid_to_str operations.
Keith Seitz [Thu, 4 Mar 2010 18:38:35 +0000 (18:38 +0000)]
* linespec.c (decode_line_1): Update comments for is_quote_enclosed.
If the filename portion of the linespec was quoted, recheck the
remainder for additional quoting.
(locate_first_half): Skip over completer chars, too.
Keith Seitz [Thu, 4 Mar 2010 18:38:17 +0000 (18:38 +0000)]
* gdb.cp/overload.exp: Test that the filename portion of a linespec
can be quoted. Test that both the filename and function/line
portions can be quoted at the same time.
2010-03-04 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
* arm-tdep.c (arm_pc_is_thumb): Add heuristic that tries to get
the state right when single stepping.
(arm_get_next_pc_raw, thumb_get_next_pc_raw): New functions.
Get the next PC along with the instruction state.
(thumb_get_next_pc): Remove.
(arm_get_next_pc): Modified to use arm_get_next_pc_raw.
Stan Shebs [Thu, 4 Mar 2010 00:32:50 +0000 (00:32 +0000)]
2010-03-03 Stan Shebs <stan@codesourcery.com>
* remote.c (remote_download_tracepoint): Iterate over locations.
* tracepoint.c (validate_actionline): Ditto.
(encode_actions): Add location argument.
(trace_dump_command): Check all locations to see if stepping
frame.
Doug Evans [Wed, 3 Mar 2010 22:13:51 +0000 (22:13 +0000)]
* gdb.threads/linux-dp.c (shared_random): Call rand instead of rand_r.
* gdb.threads/linux-dp.exp: Compile with gdb_compile_pthreads instead
of gdb_compile. Add another pattern to match android backtrace.
* target-reloc.h (relocate_section): Check the symbol table index
for -1U before setting the local symbol index.
(scan_relocatable_relocs): If copying the relocation, record that
the local symbol is required.
* object.h (Symbol_value::is_output_symtab_index_set): New
function.
(Symbol_value::may_be_discarded_from_output_symtab): New
function.
(Symbol_value::has_output_symtab_entry): New function.
(Symbol_value::needs_output_symtab_entry): Remove.
(Symbol_value::output_symtab_index): Make sure the symbol index is
set.
(Symbol_value::set_output_symtab_index): Make sure the symbol
index is not set. Make sure the new index is valid.
(Symbol_value::set_must_have_output_symtab_entry): New function.
(Symbol_value::has_output_dynsym_entry): New function.
(Symbol_value::set_output_dynsym_index): Make sure the new index
is valid.
(Sized_relobj::set_must_have_output_symtab_entry): New function.
* object.cc (Sized_relobj::do_count_local_symbols): Only discard a
local symbol if permitted.
(Sized_relobj::do_finalize_local_symbols): Call
is_output_symtab_index_set rather than needs_output_symtab_entry.
(Sized_relobj::write_local_symbols): Call has_output_symtab_entry
rather than needs_output_symtab_entry. Call
has_output_dynsym_entry rather than needs_output_dynsym_entry.
* arm.cc (Arm_relobj::update_output_local_symbol_count): Call
is_output_symtab_index_set rather than needs_output_symtab_entry.
* testsuite/discard_locals_relocatable_test.c: New file.
* testsuite/discard_locals_test.sh: Test -r.
* testsuite/Makefile.am (check_DATA): Add
discard_locals_relocatable_test1.syms,
discard_local_relocatable_test2.syms.
(MOSTLYCLEANFILES): Likewise. Also add
discard_locals_relocatable_test1.lout and
discard_locals_relocatable_test2.out.
(discard_locals_relocatable_test1.syms): New target.
(discard_locals_relocatable_test.o): New target.
(discard_locals_relocatable_test1.out): New target.
(discard_locals_relocatable_test2.syms): New target.
(discard_locals_relocatable_test2.out): New target.
(various): Add missing ../ld-new dependencies.
* testsuite/Makefile.in: Rebuild.
H.J. Lu [Tue, 2 Mar 2010 13:14:36 +0000 (13:14 +0000)]
Support x86 pseudo byte, word and dword registers.
gdb/
2010-03-02 H.J. Lu <hongjiu.lu@intel.com>
* amd64-tdep.c (amd64_byte_names): New.
(amd64_word_names): Likewise.
(amd64_dword_names): Likewise.
(amd64_pseudo_register_name): Likewise.
(amd64_pseudo_register_read): Likewise.
(amd64_pseudo_register_write): Likewise.
(amd64_init_abi): Set num_byte_regs, num_word_regs, num_dword_regs
and num_mmx_regs. Call set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write and
set_tdesc_pseudo_register_name. Don't call
set_gdbarch_num_pseudo_regs. Don't set mm0_regnum.
* i386-tdep.c (i386_num_mmx_regs): Removed.
(i386_num_pseudo_regs): Likewise.
(i386_byte_names): New.
(i386_word_names): Likewise.
(i386_byte_regnum_p): Likewise.
(i386_word_regnum_p): Likewise.
(i386_mmx_regnum_p): Updated.
(i386_pseudo_register_name): Make it global. Handle byte and
word pseudo-registers.
(i386_pseudo_register_read): Likewise.
(i386_pseudo_register_write): Likewise.
(i386_pseudo_register_type): Handle byte, word and dword
pseudo-registers
(i386_register_reggroup_p): Don't include pseudo
registers, except for MXX, in any register groups. Don't
include pseudo byte, word, dword registers in general_reggroup.
(i386_gdbarch_init): Set num_byte_regs, num_word_regs,
num_dword_regs, al_regnum, ax_regnum and eax_regnum. Put MMX
pseudo-registers after word pseudo-registers. Call
set_gdbarch_num_pseudo_regs after calling gdbarch_init_osabi.
* ld/testsuite/ld-arm/arm-merge-incompatible.d: New test.
* ld/testsuite/ld-arm/arm-merge-incompatiblea.s: Likewise.
* ld/testsuite/ld-arm/arm-merge-incompatibleb.s: Likewise.
* ld/testsuite/ld-arm/arm-elf.exp: Run the new test.
* bfd/elf32-arm.c (elf32_arm_merge_eabi_attributes): Add a check of the
return value from the call to _bfd_elf_merge_object_attributes.
Christophe Lyon [Tue, 2 Mar 2010 08:19:54 +0000 (08:19 +0000)]
2010-03-02 Christophe Lyon <christophe.lyon@st.com>
Alan Modra <amodra@gmail.com>
bfd/
* elf32-arm.c (a8_erratum_fix): Add st_type field to record the
destination mode of the a8 stub.
(elf32_arm_link_hash_table): Add top_id field.
(elf32_arm_link_hash_table_create): Initialize top_id.
(arm_type_of_stub): Update prototype, st_type can now be updated
by this function. Actual destination address in case of PLT is
computed here, to help factorizing code.
(elf32_arm_stub_name): Update prototype, use stub_type additional
parameter to build stub name.
(elf32_arm_get_stub_entry): Update prototype, use stub_type
additional parameter to build stub entry.
(arm_build_one_stub): Use bfd_put_16/bfd_put_32 instead of
put_thumb_insn/put_arm_insn as BE8 encoding is now handled later.
Call elf32_arm_final_link_relocate to process all in-stub
relocations.
(elf32_arm_setup_section_lists): Update top_id.
(cortex_a8_erratum_scan): Record stub destination mode.
(elf32_arm_size_stubs): Update call to arm_type_of_stub according
to new prototype.
(elf32_arm_final_link_relocate): Enable processing of in-stub
REL32 relocations. Rely on arm_type_of_stub to detect if a stub is
needed, enabling code factorization.
(elf32_arm_final_link): Process stub sections.
(elf32_arm_output_map_sym): Add entry to code/data map.
ld/testsuite/
* ld-arm/arm-elf.exp: Change .text start address for
farcall-thumb-arm tests. Add v4t variant for farcall-mixed-lib
test.
* ld-arm/farcall-mixed-lib-v4t.d: New test.
* ld-arm/farcall-mixed-lib1.s: Don't force armv5t.
* ld-arm/farcall-mixed-lib2.s: Likewise.
* ld-arm/arm-call.d: Update expected results.
* ld-arm/cortex-a8-far.d: Likewise.
* ld-arm/farcall-group-size2.d: Likewise.
* ld-arm/farcall-group.d: Likewise.
* ld-arm/farcall-mix.d: Likewise.
* ld-arm/farcall-mix2.d: Likewise.
* ld-arm/farcall-mixed-app-v5.d: Likewise.
* ld-arm/farcall-mixed-app.d: Likewise.
* ld-arm/farcall-mixed-lib.d: Likewise.
* ld-arm/farcall-thumb-arm.d: Likewise.
* ld-arm/farcall-thumb-arm-blx.d: Likewise.
* ld-arm/farcall-thumb-arm-pic-veneer.d: Likewise.
* ld-arm/farcall-thumb-arm-blx-pic-veneer.d: Likewise.
* ld-arm/farcall-thumb-arm.s: Update test. Add a new call to
potentially generate different types of stubs.
projects / thirdparty / binutils-gdb.git / log
