Jose E. Marchesi [Thu, 30 Nov 2023 07:34:09 +0000 (08:34 +0100)]
gas: support double-slash line comments in BPF assembly
This patch makes the BPF assembler to support double-slash line
comments, like the llvm BPF assembler does. At this point both
assemblers support the same commenting styles:
- Line comments preceded by # or //.
- Non-nestable block comments delimited by /* and */.
This patch also adds a couple of tests to make sure all the comment
styles work in both normal and pseudoc syntax. The manual is also
updated to mention double-slash line comments.
Tom Tromey [Mon, 16 Oct 2023 19:36:03 +0000 (13:36 -0600)]
Switch to -Wimplicit-fallthrough=5
This changes the various gdb-related directories to use
-Wimplicit-fallthrough=5, meaning that only the fallthrough attribute
can be used in switches -- special 'fallthrough' comments will no
longer be usable.
Tom Tromey [Sun, 15 Oct 2023 17:09:07 +0000 (11:09 -0600)]
Use C++17 [[fallthrough]] attribute
This changes gdb to use the C++17 [[fallthrough]] attribute rather
than special comments.
This was mostly done by script, but I neglected a few spellings and so
also fixed it up by hand.
I suspect this fixes the bug mentioned below, by switching to a
standard approach that, presumably, clang supports.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23159 Approved-By: John Baldwin <jhb@FreeBSD.org> Approved-By: Luis Machado <luis.machado@arm.com> Approved-By: Pedro Alves <pedro@palves.net>
gprofng: support GNU option syntax in gp-display-html, plus various fixes
This is a major update of gp-display-html. The option handling has been
modified to support the GNU style long option syntax. Compatibility with
the previous syntax has been preserved. If still used, a warning is issued.
Through the --nowarnings option, this can be suppressed.
In addition to this, various lay-out changes have been implemented. In
particular to reduce the number of lines that extend beyond column 79.
Several bugs have been fixed, for example in the handling of directory names.
gprofng/ChangeLog
2023-11-28 Ruud van der Pas <ruud.vanderpas@oracle.com>
* gp-display-html/gp-display-html.in: Change option syntax plus fixes.
This is a major update of all the man pages. Bugs 30679 and 30895 are
addressed. In addition to fixes for typos, the texts have been expanded
and clarified, and line lengths no longer extend beyond column 79. In
case of gp-display-html, the new option syntax is documented. The user
guide has a new section on the gprofng GUI.
gprofng/ChangeLog
2023-11-28 Ruud van der Pas <ruud.vanderpas@oracle.com>
PR 30679
PR 30895
* doc/gp-archive.texi: Expand the description of the options.
* doc/gp-collect-app.texi: Fix various typos and textual improvements.
* doc/gp-display-html.texi: Cover the new GNU long option syntax.
* doc/gp-display-src.texi: Fix various typos and textual improvements.
* doc/gp-display-text.texi: Fix typos fixed and textual improvements.
* doc/gp-macros.texi: Fix a bug in the vspace macro and add new macro.
* doc/gprofng.texi: Cover the GPROFNG_SYSCONFDIR environment variable.
* doc/gprofng_ug.texi: Fix various typos and textual improvements.
* doc/version.texi: Adapt the date and version number.
Andrew Burgess [Mon, 27 Nov 2023 21:29:53 +0000 (21:29 +0000)]
gdb/python: display errors from command completion
This commit makes the gdb.Command.complete methods more verbose when
it comes to error handling.
Previous to this commit if any commands implemented in Python
implemented the complete method, and if there were any errors
encountered when calling that complete method, then GDB would silently
hide the error and continue as if there were no completions.
This makes is difficult to debug any errors encountered when writing
completion methods, and encourages the idea that Python extensions can
be broken, and GDB will just silently work around them.
I don't think this is a good idea. GDB should encourage extensions to
be written correctly, and robustly, and one way in which GDB can (I
think) support this, is by pointing out when an extension goes wrong.
In this commit I've gone through the Python command completion code,
and added calls to gdbpy_print_stack() or gdbpy_print_stack_or_quit()
in places where we were either clearing the Python error, or, in some
cases, just not handling the error at all.
One thing I have not changed is in cmdpy_completer (py-cmd.c) where we
process the list of completions returned from the Command.complete
method; this routine includes a call to gdbpy_is_string to check a
possible completion is a string, if not the completion is ignored.
I was tempted to remove this check, attempt to complete each result to
a string, and display an error if the conversion fails. After all,
returning anything but a string is surely a mistake by the extension
author.
However, the docs clearly say that only strings within the returned
list will be considered as completions. Anything else is ignored. As
such, and to avoid (what I think is pretty unlikely) breakage of
existing code, I've retained the gdbpy_is_string check.
After the gdbpy_is_string check we call python_string_to_host_string,
if this call fails then I do now print the error, where before we
ignored the error. I think this is OK; if GDB thinks something is a
string, but still can't convert it to a string, then I think it's OK
to display the error in that case.
Another case which I was a little unsure about was in
cmdpy_completer_helper, and the call to PyObject_CallMethodObjArgs,
which is when we actually call Command.complete. Previously, if this
call resulted in an exception then we would ignore this and just
pretend there were no completions.
Of all the changes, this is possibly the one with the biggest
potential for breaking existing scripts, but also, is, I think, the
most useful change. If the user code is wrong in some way, such that
an exception is raised, then previously the user would have no obvious
feedback about this breakage. Now GDB will print the exception for
them, making it, I think, much easier to debug their extension. But,
if there is user code in the wild that relies on raising an exception
as a means to indicate there are no completions .... well, that code
is going to break after this commit. I think we can live with this
though, the exceptions means no completions thing was never documented
behaviour.
I also added a new error() call if the PyObject_CallMethodObjArgs call
raises an exception. This causes the completion mechanism within GDB
to stop. Within GDB the completion code is called twice, the first
time to compute the work break characters, and then a second time to
compute the actual completions.
If PyObject_CallMethodObjArgs raises an exception when computing the
word break character, and we print it by calling
gdbpy_print_stack_or_quit(), but then carry on as if
PyObject_CallMethodObjArgs had returns no completions, GDB will
call the Python completion code again, which results in another call
to PyObject_CallMethodObjArgs, which might raise the same exception
again. This results in the Python exception being printed twice.
By throwing a C++ exception after the failed
PyObject_CallMethodObjArgs call, the completion mechanism is aborted,
and no completions are offered. But importantly, the Python exception
is only printed once. I think this gives a much better user
experience.
I've added some tests to cover this case, as I think this is the most
likely case that a user will run into.
gdb: generate gdb-index identically regardless of work thread count
In this commit I added a new proc in testsuite/lib/gdb.exp called
gdb_get_worker_threads. This proc uses gdb_test_multiple with two
possible patterns. One pattern is anchored with '^', while the other
is missing the '^' which it could use.
Simon Marchi [Tue, 28 Nov 2023 17:25:07 +0000 (12:25 -0500)]
gdb: fix call to breakpoint_inserted_here_p in darwin-nat.c
Fixes this issue, introduced by f9582a22dba7 ("[gdb] Fix segfault in
for_each_block, part 1"):
CXX darwin-nat.o
/Users/smarchi/src/binutils-gdb/gdb/darwin-nat.c:1169:7: error: no matching function for call to 'breakpoint_inserted_here_p'
if (breakpoint_inserted_here_p (inf->aspace, pc))
^~~~~~~~~~~~~~~~~~~~~~~~~~
Tom Tromey [Fri, 6 Oct 2023 20:30:46 +0000 (14:30 -0600)]
Emit DAP "process" event
DAP specifies a "process" event that is sent when a process is started
or attached to. gdb was not emitting this (several DAP clients appear
to ignore it entirely), but it looked easy and harmless to implement.
Tom de Vries [Tue, 28 Nov 2023 15:31:07 +0000 (16:31 +0100)]
[gdb/tui] Use const std::string for string literals in tui-stack.c
I noticed in gdb/tui/tui-stack.c a source-level micro-optimization where
strlen with a string literal argument:
...
strlen ("bla")
...
is replaced with sizeof:
...
sizeof ("bla") - 1
...
The benefit of this is that the optimization is also done at O0, but the
drawback is that it makes the expression harder to read.
Use const std::string to encapsulate the string literals, and use
std::string::size () instead.
I tried making the string names (PROC_PREFIX, LINE_PREFIX, PC_PREFIX and
SINGLE_KEY) lower-case, but that clashed with a pre-existing pc_prefix, so
I've left them upper-case.
Tested on x86_64-linux.
Tested-By: Alexandra Petlanova Hajkova <ahajkova@redhat.com>
Jose E. Marchesi [Tue, 28 Nov 2023 13:59:38 +0000 (14:59 +0100)]
sim: bpf: do not use semicolon to begin comments
The BPF assembler has been updated to follow the clang convention in
the interpretation of semicolons: they separate statements and
directives, and do not start line comments.
Jakub Jelinek [Tue, 28 Nov 2023 12:29:58 +0000 (13:29 +0100)]
libiberty, ld: Use x86 HW optimized sha1
The following patch attempts to use x86 SHA ISA if available to speed
up in my testing about 2.5x sha1 build-id processing (in my case on
AMD Ryzen 5 3600) while producing the same result.
I believe AArch64 has similar HW acceleration for SHA1, perhaps it
could be added similarly.
Note, seems lld uses BLAKE3 rather than md5/sha1. I think it would be
a bad idea to lie to users, if they choose --buildid=sha1, we should
be using SHA1, not some other checksum, but perhaps we could add some other
--buildid= styles and perhaps make one of the new the default.
Tested on x86_64-linux, both on Intel i9-7960X (which doesn't have
sha_ni ISA support) without/with the patch and on AMD Ryzen 5 3600
(which does have it) without/with the patch.
2023-11-28 Jakub Jelinek <jakub@redhat.com>
include/
* sha1.h (sha1_process_bytes_fn): New typedef.
(sha1_choose_process_bytes): Declare.
libiberty/
* configure.ac (HAVE_X86_SHA1_HW_SUPPORT): New check.
* sha1.c: If HAVE_X86_SHA1_HW_SUPPORT is defined, include x86intrin.h
and cpuid.h.
(sha1_hw_process_bytes, sha1_hw_process_block,
sha1_choose_process_bytes): New functions.
* config.in: Regenerated.
* configure: Regenerated.
ld/
* ldbuildid.c (generate_build_id): Use sha1_choose_process_bytes ()
instead of &sha1_process_bytes.
Andrew Burgess [Thu, 26 Oct 2023 11:05:06 +0000 (12:05 +0100)]
gdb/testsuite: add a new check-all-boards target
The make-check-all.sh script (gdb/testsuite/make-check-all.sh) is
great, it makes it super easy to run some test(s) using all the
available board files.
This commit aims to make this script even easier to access by adding a
check-all-boards target to the GDB Makefile. This new target checks
for (and requires) a number of environment variables, so the target
should be used like this:
make check-all-boards GDB_TARGET_USERNAME=remote-target \
GDB_HOST_USERNAME=remote-host \
TESTS="gdb.base/break.exp"
Where GDB_TARGET_USERNAME and GDB_HOST_USERNAME are the user names
that should be passed to the make-check-all.sh --target-user and
--host-user command line options respectively.
My personal intention is to set these variables in my environment, so
all I'll need to do is:
make check-all-boards TESTS="gdb.base/break.exp"
The make rule always passes --keep-results to the make-check-all.sh
script, as I find that the most useful. It's super frustrating to run
the tests and realise you forgot that option and the results have been
discarded.
Andrew Burgess [Tue, 7 Nov 2023 18:11:13 +0000 (18:11 +0000)]
gdb/testsuite: log 'make check' command in make-check-all.sh
I have been making more use of the make-check-all.sh script to run
tests against all boards.
But one thing is pretty annoying. When a test fails on some random
board, I have to run make-check-all.sh with --verbose and --dry-run in
order to see what RUNTESTFLAGS I should be using.
I always run with --keep-results on, so, in this commit, I propose
that, when --keep-results is on the 'make check' command will be
written out to a file within the stored results directory, like:
Andrew Burgess [Mon, 27 Nov 2023 13:19:39 +0000 (13:19 +0000)]
gdb: generate dwarf-5 index identically as worker-thread count changes
Similar to the previous commit, this commit ensures that the dwarf-5
index files are generated identically as the number of worker-threads
changes.
Building the dwarf-5 index makes use of a closed hash table, the
bucket_hash local within debug_names::build(). Entries are added to
bucket_hash from m_name_to_value_set, which, in turn, is populated
by calls to debug_names::insert() in write_debug_names. The insert
calls are ordered based on the entries within the cooked_index, and
the ordering within cooked_index depends on the number of worker
threads that GDB is using.
My proposal is to sort each chain within the bucket_hash closed hash
table prior to using this to build the dwarf-5 index.
The buckets within bucket_hash will always have the same ordering (for
a given GDB build with a given executable), and by sorting the chains
within each bucket, we can be sure that GDB will see each entry in a
deterministic order.
I've extended the index creation test to cover this case.
Andrew Burgess [Fri, 24 Nov 2023 12:04:36 +0000 (12:04 +0000)]
gdb: generate gdb-index identically regardless of work thread count
It was observed that changing the number of worker threads that GDB
uses (maintenance set worker-threads NUM) would have an impact on the
layout of the generated gdb-index.
The cause seems to be how the CU are distributed between threads, and
then symbols that appear in multiple CU can be encountered earlier or
later depending on whether a particular CU moves between threads.
I certainly found this behaviour was reproducible when generating an
index for GDB itself, like:
And then setting different values for NUM will change the generated
index.
Now, the question is: does this matter?
I would like to suggest that yes, this does matter. At Red Hat we
generate a gdb-index as part of the build process, and we would
ideally like to have reproducible builds: for the same source,
compiled with the same tool-chain, we should get the exact same output
binary. And we do .... except for the index.
Now we could simply force GDB to only use a single worker thread when
we build the index, but, I don't think the idea of reproducible builds
is that strange, so I think we should ensure that our generated
indexes are always reproducible.
To achieve this, I propose that we add an extra step when building the
gdb-index file. After constructing the initial symbol hash table
contents, we will pull all the symbols out of the hash, sort them,
then re-insert them in sorted order. This will ensure that the
structure of the generated hash will remain consistent (given the same
set of symbols).
I've extended the existing index-file test to check that the generated
index doesn't change if we adjust the number of worker threads used.
Given that this test is already rather slow, I've only made one change
to the worker-thread count. Maybe this test should be changed to use
a smaller binary, which is quicker to load, and for which we could
then try many different worker thread counts.
Andrew Burgess [Sat, 25 Nov 2023 10:35:37 +0000 (10:35 +0000)]
gdb: C++-ify mapped_symtab from dwarf2/index-write.c
Make static the functions add_index_entry, find_slot, and hash_expand,
member functions of the mapped_symtab class.
Fold an additional snippet of code from write_gdbindex into
mapped_symtab::minimize, this code relates to minimisation, so this
seems like a good home for it.
Make the n_elements, data, and m_string_obstack member variables of
mapped_symtab private. Provide a new obstack() member function to
provide access to the obstack when needed, and also add member
functions begin(), end(), cbegin(), and cend() so that the
mapped_symtab class can be treated like a contained and iterated
over.
I've also taken this opportunity to split out the logic for whether
the hash table (m_data) needs expanding, this is the new function
hash_needs_expanding. This will be useful in a later commit.
There should be no user visible changes after this commit.
Andrew Burgess [Fri, 24 Nov 2023 11:50:35 +0000 (11:50 +0000)]
gdb: reduce size of generated gdb-index file
I noticed in passing that out algorithm for generating the gdb-index
file is incorrect. When building the hash table in add_index_entry we
count every incoming entry rehash when the number of entries gets too
large. However, some of the incoming entries will be duplicates,
which don't actually result in new items being added to the hash
table.
As a result, we grow the gdb-index hash table far too often.
With an unmodified GDB, generating a gdb-index for GDB, I see a file
size of 90M, with a hash usage (in the generated index file) of just
2.6%.
With a patched GDB, generating a gdb-index for the _same_ GDB binary,
I now see a gdb-index file size of 30M, with a hash usage of 41.9%.
This is a 67% reduction in gdb-index file size.
Obviously, not every gdb-index file is going to see such big savings,
however, the larger a program, and the more symbols that are
duplicated between compilation units, the more GDB would over count,
and so, over-grow the index.
The gdb-index hash table we create has a minimum size of 1024, and
then we grow the hash when it is 75% full, doubling the hash table at
that time. Given this, then we expect that either:
a. The hash table is size 1024, and less than 75% full, or
b. The hash table is between 37.5% and 75% full.
I've include a test that checks some of these constraints -- I've not
bothered to check the upper limit, and over full hash table isn't
really a problem here, but if the fill percentage is less than 37.5%
then this indicates that we've done something wrong (obviously, I also
check for the 1024 minimum size).
Andrew Burgess [Fri, 24 Nov 2023 11:10:08 +0000 (11:10 +0000)]
gdb/testsuite: small refactor in selftest-support.exp
Split out the code that makes a copy of the GDB executable ready for
self testing into a new proc. A later commit in this series wants to
load the GDB executable into GDB (for creating an on-disk debug
index), but doesn't need to make use of the full do_self_tests proc.
There should be no changes in what is tested after this commit.
Andrew Burgess [Mon, 27 Nov 2023 14:34:57 +0000 (14:34 +0000)]
gdb: option completion for 'save gdb-index' command
Add proper support for option completion to the 'save gdb-index'
command. Update save_gdb_index_command function to make use of the
new option_def data structures for parsing the '-dwarf-5' option.
Specifically, we get this result because because tid == 0, so we get
errno == ESRCH.
The tid == 0 is caused by the switch_to_no_thread in
handle_vfork_child_exec_or_exit:
...
/* Switch to no-thread while running clone_program_space, so
that clone_program_space doesn't want to read the
selected frame of a dead process. */
scoped_restore_current_thread restore_thread;
switch_to_no_thread ();
inf->pspace = new program_space (maybe_new_address_space ());
...
but moving the maybe_new_address_space call to before that gives us the
same result. The tid is no longer 0, but we still get ESRCH because the
thread has exited.
Fix this in handle_vfork_child_exec_or_exit by doing the
maybe_new_address_space call in the context of the vfork parent.
Tested on top of trunk on x86_64-linux and ppc64le-linux.
Tested on top of gdb-14-branch on ppc64-linux.
Co-Authored-By: Simon Marchi <simon.marchi@polymtl.ca>
PR gdb/30547
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30547
Tom de Vries [Tue, 28 Nov 2023 09:31:25 +0000 (10:31 +0100)]
[gdb] Fix segfault in for_each_block, part 1
When running test-case gdb.base/vfork-follow-parent.exp on powerpc64 (likewise
on s390x), I run into:
...
(gdb) PASS: gdb.base/vfork-follow-parent.exp: \
exec_file=vfork-follow-parent-exit: target-non-stop=on: non-stop=off: \
resolution_method=schedule-multiple: print unblock_parent = 1
continue^M
Continuing.^M
Reading symbols from vfork-follow-parent-exit...^M
^M
^M
Fatal signal: Segmentation fault^M
----- Backtrace -----^M
0x1027d3e7 gdb_internal_backtrace_1^M
src/gdb/bt-utils.c:122^M
0x1027d54f _Z22gdb_internal_backtracev^M
src/gdb/bt-utils.c:168^M
0x1057643f handle_fatal_signal^M
src/gdb/event-top.c:889^M
0x10576677 handle_sigsegv^M
src/gdb/event-top.c:962^M
0x3fffa7610477 ???^M
0x103f2144 for_each_block^M
src/gdb/dcache.c:199^M
0x103f235b _Z17dcache_invalidateP13dcache_struct^M
src/gdb/dcache.c:251^M
0x10bde8c7 _Z24target_dcache_invalidatev^M
src/gdb/target-dcache.c:50^M
...
or similar.
The root cause for the segmentation fault is that linux_is_uclinux gives an
incorrect result: it should always return false, given that we're running on a
regular linux system, but instead it returns first true, then false.
In more detail, the segmentation fault happens as follows:
- a program space with an address space is created
- a second program space is about to be created. maybe_new_address_space
is called, and because linux_is_uclinux returns true, maybe_new_address_space
returns false, and no new address space is created
- a second program space with the same address space is created
- a program space is deleted. Because linux_is_uclinux now returns false,
gdbarch_has_shared_address_space (current_inferior ()->arch ()) returns
false, and the address space is deleted
- when gdb uses the address space of the remaining program space, we run into
the segfault, because the address space is deleted.
Hardcoding linux_is_uclinux to false makes the test-case pass.
We leave addressing the root cause for the following commit in this series.
For now, prevent the segmentation fault by making the address space a refcounted
object.
This was already suggested here [1]:
...
A better solution might be to have the address spaces be reference counted
...
Tested on top of trunk on x86_64-linux and ppc64le-linux.
Tested on top of gdb-14-branch on ppc64-linux.
Co-Authored-By: Simon Marchi <simon.marchi@polymtl.ca>
PR gdb/30547
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30547
John Baldwin [Mon, 27 Nov 2023 21:53:22 +0000 (13:53 -0800)]
i386: Use a fallback XSAVE layout for remote targets
If a target provides a target description including registers from the
XSAVE extended region, but does not provide an XSAVE layout, use a
fallback XSAVE layout based on the included registers. This fallback
layout matches GDB's behavior in earlier releases which assumes the
layout from Intel CPUs.
This fallback layout is currently only used for remote targets since
native targets which support XSAVE provide an explicit layout derived
from CPUID.
PR gdb/30912
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30912 Approved-By: Simon Marchi <simon.marchi@efficios.com>
We have a target board cc-with-gdb-index that uses the gdb-add-index script to
add a .gdb_index index to an exec.
There is however an alternative way of adding a .gdb_index: the index-cache.
Add a new target board cc-with-index-cache.
This is not superfluous for two reasons:
- there is functionality that gdb-add-index doesn't support, but the
index-cache does: the index-cache can add an index to an exec with a
.gnu_debugaltlink (note that when using the cc-with-gdb-index board this
case is quietly ignored), and
- using the index-cache is excercised in only a few test-cases, and having
this target board extends the test coverage to the entire test suite. This
is for instance relevant because the index-cache is written by a worker
thread in the background, so we can check more thoroughly for data races
(see PR symtab/30837).
Tom Tromey [Wed, 6 Sep 2023 14:33:46 +0000 (08:33 -0600)]
Change serial_send_break and serial_write to throw
This changes serial_send_break and serial_write to throw exceptions
rather than attempt to set errno and return an error indicator. This
lets us correctly report failures on Windows.
Both functions had to be converted in a single patch because one
implementation of send_break works via write.
This also introduces remote_serial_send_break to handle error checking
when attempting to send a break. This was previously ignored.
Tom Tromey [Fri, 1 Sep 2023 18:11:37 +0000 (12:11 -0600)]
Change serial "open" functions to throw exception
remote.c assumes that a failure to open the serial connection will set
errno. This is somewhat true, because the Windows code tries to set
errno appropriately -- but only somewhat, because it isn't clear that
the "pex" code sets it, and the tcp code seems to do the wrong thing.
It seems better to simply have the serial open functions throw on
error.
Tom Tromey [Tue, 29 Aug 2023 13:20:22 +0000 (07:20 -0600)]
Change serial_setbaudrate to throw exception
remote.c has this code:
if (serial_setbaudrate (rs->remote_desc, baud_rate))
{
/* The requested speed could not be set. Error out to
top level after closing remote_desc. Take care to
set remote_desc to NULL to avoid closing remote_desc
more than once. */
serial_close (rs->remote_desc);
rs->remote_desc = NULL;
perror_with_name (name);
The perror here cannot be correct, because if serial_setbaudrate did
set errno, it may be obscured by serial_close.
This patch changes serial_setbaudrate to throw an exception instead.
Tom Tromey [Fri, 17 Nov 2023 17:08:50 +0000 (10:08 -0700)]
Fix bug in DAP handling of 'pause' requests
While working on cancellation, I noticed that a DAP 'pause' request
would set the "do not emit the continue" flag. This meant that a
subsequent request that should provoke a 'continue' event would
instead suppress the event.
I then tried writing a more obvious test case for this, involving an
inferior call -- and discovered that gdb.events.cont does not fire for
an inferior call.
This patch installs a new event listener for gdb.events.inferior_call
and arranges for this to emit continue and stop events when
appropriate. It also fixes the original bug, by adding a check to
exec_and_expect_stop.
Andrew Burgess [Thu, 16 Nov 2023 14:42:56 +0000 (14:42 +0000)]
gdb/python: handle completion returning a non-sequence
GDB's Python API documentation for gdb.Command.complete() says:
The 'complete' method can return several values:
* If the return value is a sequence, the contents of the
sequence are used as the completions. It is up to 'complete'
to ensure that the contents actually do complete the word. A
zero-length sequence is allowed, it means that there were no
completions available. Only string elements of the sequence
are used; other elements in the sequence are ignored.
* If the return value is one of the 'COMPLETE_' constants
defined below, then the corresponding GDB-internal completion
function is invoked, and its result is used.
* All other results are treated as though there were no
available completions.
So, returning a non-sequence, and non-integer from a complete method
should be fine; it should just be treated as though there are no
completions.
However, if I write a complete method that returns None, I see this
behaviour:
(gdb) complete completefilenone x
Python Exception <class 'TypeError'>: 'NoneType' object is not iterable
warning: internal error: Unhandled Python exception
(gdb)
Which is caused because we currently assume that anything that is not
an integer must be iterable, and we call PyObject_GetIter on it. When
this call fails a Python exception is set, but instead of
clearing (and therefore ignoring) this exception as we do everywhere
else in the Python completion code, we instead just return with the
exception set.
In this commit I add a PySequence_Check call. If this call returns
false (and we've already checked the integer case) then we can assume
there are no completion results.
I've added a test which checks returning a non-sequence.
Tom de Vries [Fri, 24 Nov 2023 14:41:22 +0000 (15:41 +0100)]
[gdb/testsuite] Use more %progbits for arm
On pinebook I ran into:
...
Running gdb.tui/tui-layout-asm-short-prog.exp ...
gdb compile failed, gdb.tui/tui-layout-asm-short-prog.S: Assembler messages:
gdb.tui/tui-layout-asm-short-prog.S:23: Error: \
junk at end of line, first unrecognized character is `,'
...
Fix this by using %progbits instead of @progbits for arm.
Approved-by: Luis Machado <luis.machado@arm.com>
Tested on x86_64-linux and pinebook.
Tom de Vries [Fri, 24 Nov 2023 14:38:17 +0000 (15:38 +0100)]
[gdb/testsuite] Two fixes in gdb.python/tui-window-disabled.exp
I ran test-case gdb.python/tui-window-disabled.exp on a configuration without
python support, and ran into:
...
PASS: $exp: cleanup_properly=True: initial restart: set pagination off
UNSUPPORTED: $exp: cleanup_properly=True: couldn't restart GDB
PASS: $exp: cleanup_properly=False: initial restart: set pagination off
UNSUPPORTED: $exp: cleanup_properly=False: couldn't restart GDB
...
After looking into the test-case, I realized that this is a consequence of
!allow_python_tests.
Handle this instead by requiring allow_python_tests, such that we get the usual
and more clear:
...
UNSUPPORTED: $exp: require failed: allow_python_tests
...
Also fix a return without value in clean_restart_and_setup, which if triggered
would cause:
...
ERROR: expected boolean value but got ""
...
The reason is that cmdline is read with target_fileio_read_stralloc(),
which warns on seeing null characters. However, it's perfectly valid
for cmdline to contain \0s, so switch to target_fileio_read_alloc().
Jan Beulich [Fri, 24 Nov 2023 08:55:51 +0000 (09:55 +0100)]
x86: shrink opcode sets table
Have i386-gen produce merely the offsets into i386_optab[]. Besides
allowing to shrink the table even on 32-bit builds, this results in
removing a level of indirection from the frequently accessed
current_templates, in return for adding a level of indirection when
looking up mnemonics (commonly happening just once per insn). Plus for
PIE builds of gas it also reduces the number of relocations by about two
thousand. Finally a somewhat ugly static variable can also be eliminated
from i386_displacement().
Jan Beulich [Fri, 24 Nov 2023 08:53:55 +0000 (09:53 +0100)]
RISC-V: reduce redundancy in sign/zero extension macro insn handling
Fold M_{S,Z}EXTH, deriving signed-ness from the incoming mnemonic. Fold
riscv_ext()'s calls md_assemblef(), the first of which were entirely
identical, while the other pair differed in just a single character.
Jan Beulich [Fri, 24 Nov 2023 08:53:15 +0000 (09:53 +0100)]
RISC-V: disallow x0 with certain macro-insns
While for some of the macro insns using x0 is kind of okay, as they
would merely resolve to a sequence of hint insns (and hence not cause
misbehavior at runtime), several of them have the degenerate AUIPC
followed by a load, store, or branch using other than the designated
symbol as address and hence causing runtime issues. Refuse to assemble
those, leveraging that the matching function so far wasn't really used
for macro insns: NULL is now allowed, indicating a match (which imo is
preferable over converting match_never() to match_always()), while
other matching functions now (also) used for macro insns need to avoid
calling match_opcode().
Note that for LA the restriction is slightly too strict: In non-PIC mode
using x0 would be okay-ish as per above (as it's just LLA there). Yet
libopcodes doesn't know what mode gas is presently assembling for, so we
want to err on the safe side.
Jens Remus [Thu, 23 Nov 2023 14:48:59 +0000 (15:48 +0100)]
s390: Correct prno instruction name
IBM z13 (arch11) introduced ppno (Perform Pseudorandom Number Operation).
IBM z14 (arch12) introduced prno (Perform Random Number Operation) and
deprecated ppno.
Jens Remus [Thu, 23 Nov 2023 14:48:15 +0000 (15:48 +0100)]
s390: Add missing extended mnemonics
Add extended mnemonics specified in the z/Architecture Principles of
Operation [1] and z/Architecture Reference Summary [2], that were
previously missing from the opcode table.
The following added extended mnemonics are synonyms to a base mnemonic
and therefore disassemble into their base mnemonic:
jc, jcth, lfi, llgfi, llghi
The following added extended mnemonics are more specific than their base
mnemonic and therefore disassemble into the added extended mnemonic:
risbhgz, risblgz, rnsbgt, rosbgt, rxsbgt
The following added extended mnemonics are more specific than their base
mnemonic, but disassemble into their base mnemonic due to design
constraints:
notr, notgr
The missing extended mnemonic jl* conditional jump long flavors cannot
be added, as they would clash with the existing non-standard extended
mnemonic j* conditional jump flavors jle and jlh. The missing extended
mnemonic jlc jump long conditional is not added, as the related jl*
flavors cannot be added.
Note that these missing jl* conditional jump long flavors are already
defined as non-standard jg* flavors instead. While the related missing
extended mnemonic jlc could be added as non-standard jgc instead it is
forgone in favor of not adding further non-standard mnemonics.
The missing extended mnemonics sllhh, sllhl, slllh, srlhh, srlhl, and
srllh cannot be implemented using the current design, as they require
computed operands. For that reason the following missing extended
mnemonics are not added as well, as they fall into the same category of
instructions that operate on high and low words of registers. They
should better be added together, not to confuse the user, which of those
instructions are currently implemented or not.
lhhr, lhlr, llhfr, llchhr, llchlr, llclhr, llhhhr, llhhlr, llhlhr,
nhhr, nhlr, nlhr, ohhr, ohlr, olhr, xhhr, xhlr, xlhr
[1] IBM z/Architecture Principles of Operation, SA22-7832-13, IBM z16,
https://publibfp.dhe.ibm.com/epubs/pdf/a227832d.pdf
[2] IBM z/Architecture Reference Summary, SA22-7871-11,
https://www.ibm.com/support/pages/sites/default/files/2022-09/SA22-7871-11.pdf
Jens Remus [Thu, 23 Nov 2023 14:46:46 +0000 (15:46 +0100)]
s390: Align optional operand definition to specs
The IBM z/Architecture Principle of Operation [1] specifies the last
operand(s) of some (extended) mnemonics to be optional. Align the
mnemonic definitions in the opcode table according to specification.
This changes the last operand of the following (extended) mnemonics to
be optional:
risbg, risbgz, risbgn, risbgnz, risbhg, risblg, rnsbg, rosbg, rxsbg
Note that efpc and sfpc actually have only one operand, but had
erroneously been defined to have two. For backwards compatibility the
wrong RR register format must be retained. Since the superfluous second
operand is defined as optional the instruction can still be coded as
specified.
[1]: IBM z/Architecture Principles of Operation, SA22-7832-13, IBM z16,
https://publibfp.dhe.ibm.com/epubs/pdf/a227832d.pdf
opcodes/
* s390-opc.txt: Align optional operand definition to
specification.
testsuite/
* zarch-z10.s: Add test cases for risbg, risbgz, rnsbg, rosbg,
and rxsbg.
* zarch-z10.d: Likewise.
* zarch-z196.s: Add test cases for risbhg and risblg.
* zarch-z196.d: Likewise.
* zarch-zEC12.s: Add test cases for risbgn and risbgnz.
* zarch-zEC12.d: Likewise.
Signed-off-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Jens Remus [Thu, 23 Nov 2023 14:45:42 +0000 (15:45 +0100)]
s390: Make operand table indices relative to each other
This is a purely mechanical change. It allows subsequent insertions into
the operands table without having to renumber all operand indices.
The only differences in the resulting ELF object are in the .debug_info
section. This has been confirmed by diffing the following xxd and readelf
output:
Jens Remus [Thu, 23 Nov 2023 14:44:41 +0000 (15:44 +0100)]
s390: Add brasl edge test cases from ESA to z/Architecture
The ESA opcode test cases for IBM z900 contain a few edge cases. They
exercise the brasl mnemonic with its largest allowed negative and
positive offsets. Linux on zSeries in ESA mode executes in 31-bit
addressing mode. Therefore the ESA test cases are assembled with -m31.
In 31-bit addressing mode the address computation using those large
offsets wraps, which is correctly reflected in the disassembly.
Linux on Z in z/Architecture mode executes in 64-bit addressing mode.
Therefore the z/Architecture (zarch) test cases are assembled with -m64.
In 64-bit addressing mode the address computation using those large
offsets does not necessarily wrap.
gas/
* testsuite/gas/s390/zarch-z900.s: Add brasl tests from ESA that
exercise edge cases.
* testsuite/gas/s390/zarch-z900.d: Likewise.
Signed-off-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Jens Remus [Thu, 23 Nov 2023 14:43:36 +0000 (15:43 +0100)]
s390: Position independent verification of relative addressing
Opcode test cases for z/Architecture instructions that use relative
addressing contained hardcoded offsets in the test verification
patterns. Inserting or reordering of instructions into those test cases
therefore required updating of those hardcoded offsets.
Use regular expressions with backreferences to verify results of test
cases containing instructions with relative addressing. This makes the
verification position independent.
gas/
* testsuite/gas/s390/esa-g5.d: Make opcode test verification
pattern position independent where possible.
* testsuite/gas/s390/esa-z900.d: Likewise.
* testsuite/gas/s390/zarch-z900.d: Likewise.
* testsuite/gas/s390/zarch-z10.d: Likewise.
* testsuite/gas/s390/zarch-z196.d: Likewise.
* testsuite/gas/s390/zarch-zEC12.d: Likewise.
Signed-off-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Tom Tromey [Wed, 22 Nov 2023 13:54:40 +0000 (06:54 -0700)]
Fix build with GCC 7.5
A recent change to 'struct field' caused a build failure with GCC
7.5.0, as reported by Tom de Vries:
/data/vries/gdb/src/gdb/gdbtypes.h:721:51: error:
‘field::m_accessibility’ is too small to hold all values of ‘enum
class accessibility’ [-Werror]
ENUM_BITFIELD (accessibility) m_accessibility : 2;
^
Mark Wielaard pointed out that this was a GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=51242
This patch works around the bug by changing several members not to be
bitfields. It reduces the size of the enum's underlying type,
instead.
I also changed m_bitsize to no longer be a bitfield -- that was done
for packing reasons in ancient times, but with m_accessibility not
being a bitfield, this no longer matters.
I removed fn_field::dummy. In earlier times it was somewhat normal in
gdb to have these dummy fields to keep track of any available padding.
However, since the advent of "ptype/o", there doesn't seem to be any
need for this.
This patch does not change the size of struct field, fn_field, or
decl_field on 64-bit hosts.
Jin Ma [Sat, 18 Nov 2023 07:08:59 +0000 (15:08 +0800)]
RISC-V: Add vector permutation instructions for T-Head VECTOR vendor extension
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds permutation instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension
are documented in a PR for the RISC-V toolchain conventions ([1]).
Jin Ma [Sat, 18 Nov 2023 07:08:32 +0000 (15:08 +0800)]
RISC-V: Add vector mask instructions for T-Head VECTOR vendor extension
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds mask instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension
are documented in a PR for the RISC-V toolchain conventions ([1]).
Jin Ma [Sat, 18 Nov 2023 07:08:12 +0000 (15:08 +0800)]
RISC-V: Add reductions instructions for T-Head VECTOR vendor extension
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds reductions instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension
are documented in a PR for the RISC-V toolchain conventions ([1]).
Jin Ma [Sat, 18 Nov 2023 07:07:39 +0000 (15:07 +0800)]
RISC-V: Add floating-point arithmetic instructions for T-Head VECTOR vendor extension
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds floating-point arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
Jin Ma [Sat, 18 Nov 2023 07:07:20 +0000 (15:07 +0800)]
RISC-V: Add fixed-point arithmetic instructions for T-Head VECTOR vendor extension
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds fixed-point arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
Jin Ma [Sat, 18 Nov 2023 07:07:00 +0000 (15:07 +0800)]
RISC-V: Add integer arithmetic instructions for T-Head VECTOR vendor extension
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds integer arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
Jin Ma [Sat, 18 Nov 2023 07:06:31 +0000 (15:06 +0800)]
RISC-V: Add sub-extension XTheadZvamo for T-Head VECTOR vendor extension
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds the sub-extension "XTheadZvamo" for the
"XTheadVector" extension, and it provides AMO instructions
for T-Head VECTOR vendor extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
Jin Ma [Sat, 18 Nov 2023 07:05:31 +0000 (15:05 +0800)]
RISC-V: Add load/store segment instructions for T-Head VECTOR vendor extension
T-Head has a range of vendor-specific instructions. Therefore it
makes sense to group them into smaller chunks in form of vendor
extensions.
This patch adds provides load/store segment instructions for T-Head VECTOR
vendor extension, which same as the "Zvlsseg" extension in RVI 0.71 vector
extension, but belongs to the "XTheadVector" extension. The 'th' prefix
and the "XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
Jin Ma [Sat, 18 Nov 2023 07:04:50 +0000 (15:04 +0800)]
RISC-V: Add load/store instructions for T-Head VECTOR vendor extension
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds load/store instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension are
documented in a PR for the RISC-V toolchain conventions ([1]).
Jin Ma [Sat, 18 Nov 2023 07:04:01 +0000 (15:04 +0800)]
RISC-V: Add configuration-setting instructions for T-Head VECTOR vendor extension
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds configuration-setting instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
Jin Ma [Sat, 18 Nov 2023 06:58:25 +0000 (14:58 +0800)]
RISC-V: Add CSRs for T-Head VECTOR vendor extension
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the CSRs for XTheadVector. Because of the
conflict between encoding and teh 'V' extension, it is implemented
by alias. The 'th' prefix and the "XTheadVector" extension are
documented in a PR for the RISC-V toolchain conventions ([1]).
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com> Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* config/tc-riscv.c (enum riscv_csr_class): Add the class for
the CSRs of the "XTheadVector" extension.
(riscv_csr_address): Likewise.
* testsuite/gas/riscv/x-thead-vector-csr-warn.d: New test.
* testsuite/gas/riscv/x-thead-vector-csr-warn.l: New test.
* testsuite/gas/riscv/x-thead-vector-csr.d: New test.
* testsuite/gas/riscv/x-thead-vector-csr.s: New test.
Jin Ma [Sat, 18 Nov 2023 06:53:08 +0000 (14:53 +0800)]
RISC-V: Add T-Head VECTOR vendor extension.
T-Head has a range of vendor-specific instructions ([2]).
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the "XTheadVector" extension, a collection of
T-Head-specific vector instructions. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the RISC-V
toolchain conventions ([1]).
Here are some things that need to be explained:
The "XTheadVector" extension is not a custom-extension, but
a non-standard non-conforming extension. The encoding space
of the "TheadVector" instructions overlaps with those of
the 'V' extension. This encoding space conflict is not on
purpose, but the result of issues in the past that have
been resolved since. Therefore, the "XTheadVector" extension
and the 'V' extension are in conflict.
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com> Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_parse_check_conflicts): The
"XTheadVector" extension and the 'V' extension are in conflict.
(riscv_multi_subset_supports): Likewise..
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* doc/c-riscv.texi:
* testsuite/gas/riscv/x-thead-vector-fail.d: New test.
* testsuite/gas/riscv/x-thead-vector-fail.l: New test.
* testsuite/gas/riscv/x-thead-vector.s: New test.
In AIX, while we followed the child process and detach on fork was on we hit thr!= NULL assertion failure.
The reason for the same was GDB core trying to switch to a child thread with tid not set that does not
exist, since child's ptid was changed to ptid_t (pid, 0, tid) in sync_threadlists() as it was threaded.
The way this happened was when a new child process is born, its object file will be loaded, calling the new_objfile ()
in aix-thread.c file from clone_program_space, which is
called from within follow_fork_inferior. Therefore it end ups syncing threadlists via pd_update ().
This patch is a fix for the same where pd_update () is called in the wait () or in update_thread_list() hook only.
Tom de Vries [Wed, 22 Nov 2023 18:07:47 +0000 (19:07 +0100)]
[gdb/tui] Fix resizing of terminal to 1 or 2 lines
When starting TUI in a terminal with 3 lines:
...
$ echo $LINES
3
$ gdb -q -tui
...
and resizing the terminal to 2 lines we run into a segfault.
The problem is that for the source window:
- the minimum height is 3 (the default), but
- the maximum height is only 2 because there are only 2 lines.
This discrepancy eventually leads to a call to newwin in make_window with:
...
(gdb) p height
$1 = 3
(gdb) p width
$2 = 56
(gdb) p y
$3 = -1
(gdb) p x
$4 = 0
...
which results in a nullptr.
This violates the assumption here in tui_apply_current_layout:
....
/* Get the new list of currently visible windows. */
std::vector<tui_win_info *> new_tui_windows;
applied_layout->get_windows (&new_tui_windows);
...
that get_windows only returns visible windows, which leads to tui_windows
holding a dangling pointer, which results in the segfault.
Fix this by:
- making sure get_windows only returns visible windows, and
- detecting the situation and dropping windows from the layout if
there's no room for them.
Tested on x86_64-linux.
Approved-By: Tom Tromey <tom@tromey.com>
PR tui/31044
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31044
Tom de Vries [Wed, 22 Nov 2023 18:07:47 +0000 (19:07 +0100)]
[gdb/tui] Allow command window of 1 or 2 lines
When starting TUI in a terminal with 2 lines (likewise with 1 line):
...
$ echo $LINES
2
$ gdb -q -tui
...
we run into this assert in tui_apply_current_layout:
...
/* This should always be made visible by a layout. */
gdb_assert (TUI_CMD_WIN != nullptr);
...
The problem is that for the command window:
- the minimum height is 3 (the default), but
- the maximum height is only 2 because there are only 2 lines.
This discrepancy eventually leads to a call to newwin in make_window with:
...
(gdb) p height
$1 = 3
(gdb) p width
$2 = 66
(gdb) p y
$3 = -1
(gdb) p x
$4 = 0
(gdb)
...
which results in a nullptr, which eventually triggers the assert.
The easiest way to fix this is to change the minimum height of the command
window to 1. However, that would also change behaviour for the case that the
screen size is 3 lines or more. For instance, in gdb.tui/winheight.exp the
number of lines in the terminal is 24, and the test-case checks that the user
cannot increase the source window height to the point that the command window
height would be less than 3.
Fix this by calculating the minimum height of the command window as follows:
- the default (3) if max_height () allows it, and
- max_height () otherwise.
Tested on x86_64-linux.
Approved-By: Tom Tromey <tom@tromey.com>
PR tui/31044
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31044
I ran into a failure in test-case gdb.python/py-missing-debug.exp with python
3.6, which was fixed by commit 7db795bc67a ("gdb/python: remove use of
str.isascii()").
However, I subsequently ran into a failure with python 3.11:
...
(gdb) PASS: $exp: initial checks: debug info no longer found
source py-missing-debug.py^M
Traceback (most recent call last):^M
File "py-missing-debug.py", line 17, in <module>^M
from gdb.missing_debug import MissingDebugHandler^M
File "missing_debug.py", line 21, in <module>^M
from curses.ascii import isascii, isalnum^M
File "/usr/lib64/python3.11/_import_failed/curses.py", line 16, in <module>^M
raise ImportError(f"""Module '{failed_name}' is not installed.^M
ImportError: Module 'curses' is not installed.^M
Use:^M
sudo zypper install python311-curses^M
to install it.^M
(gdb) FAIL: $exp: source python script
...
Apparently I have the curses module installed for 3.6, but not 3.11.
I could just install it, but the test-case worked fine with 3.11 before commit 7db795bc67a.
Fix this by only using the curses module when necessary, for python <= 3.7.
Tested on x86_64-linux, with both python 3.6 and 3.11.
we can cleanup how the help text is generated in monitor_show_help.
This doesn't change the output that the user will see -- it just folds
multiple monitor_output calls into one.
There should be no user visible change after this commit.
Tom Tromey [Fri, 27 Oct 2023 16:58:00 +0000 (10:58 -0600)]
Simplify C++ type-printing
The C++ type-printing code had its own variant of the accessibility
enum. This patch removes this and changes the code to use the new one
from gdbtypes.h.
This patch also changes the C++ code to recognize the default
accessibility of a class. This makes ptype a bit more C++-like, and
lets us remove a chunk of questionable code.
Acked-By: Simon Marchi <simon.marchi@efficios.com> Reviewed-by: Keith Seitz <keiths@redhat.com>
Tom Tromey [Fri, 27 Oct 2023 16:51:50 +0000 (10:51 -0600)]
Use enum accessibility in types and member functions
This changes nested types and member functions to use the new
'accessibility' enum, rather than separate private/protected flags.
This is done for consistency, but it also lets us simplify some other
code in the next patch.
Acked-By: Simon Marchi <simon.marchi@efficios.com> Reviewed-by: Keith Seitz <keiths@redhat.com>
projects / thirdparty / binutils-gdb.git / log
