zoneconf.cgi: Add STP options to GUI

[ipfire-2.x.git] / langs / en / cgi-bin / en.pl

diff --git a/langs/en/cgi-bin/en.pl b/langs/en/cgi-bin/en.pl
index 95a1cfda4080674ad1083aac637731658dbfcf33..9767be178589cb37c00fd378763bcccae3a692f3 100644 (file)
--- a/langs/en/cgi-bin/en.pl
+++ b/langs/en/cgi-bin/en.pl
@@ -3028,9 +3028,13 @@
 'zoneconf nicmode default' => 'Default',
 'zoneconf nicmode macvtap' => 'MacVTap',
 'zoneconf notice reboot' => 'Please reboot to apply your changes.',
+'zoneconf stp enable' => 'STP enable',
+'zoneconf stp priority' => 'Bridge Priority',
 'zoneconf title' => 'Zone Configuration',
 'zoneconf val native assignment error' => 'A NIC cannot be accessed natively by more than one zone.',
 'zoneconf val ppp assignment error' => 'The NIC used for RED in PPP mode cannot be accessed by any other zone.',
+'zoneconf val stp priority range error' => 'STP bridge priority must be in the range of 1-65535',
+'zoneconf val stp zone mode error' => 'STP can only be enabled if the zone is in bridge mode',
 'zoneconf val vlan amount assignment error' => 'A zone cannot have more than one VLAN assigned.',
 'zoneconf val vlan tag assignment error' => 'You cannot use the same VLAN tag more than once per NIC.',
 'zoneconf val zoneslave amount error' => 'A zone that is not in bridge mode can\'t have more than one NIC assigned',