--- /dev/null
+From f78cd93d767cd75969c4661723cfce46071e5b1b Mon Sep 17 00:00:00 2001
+From: Robert Nelson <robertcnelson@gmail.com>
+Date: Tue, 11 Dec 2012 06:48:52 -0600
+Subject: [PATCH 06/10] Beagle: expansion: add wifi
+
+build fixes from Pantelis Antoniou <panto@antoniou-consulting.com>
+
+Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c | 119 +++++++++++++++++++++++++++++++
+ 1 file changed, 119 insertions(+)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index a8de97e..2322d6c 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -221,6 +221,73 @@ static struct {
+ .i2c_settings = EXPANSION_I2C_NONE,
+ };
+
++#if IS_ENABLED(CONFIG_WL12XX)
++#include <linux/regulator/fixed.h>
++#include <linux/ti_wilink_st.h>
++#include <linux/wl12xx.h>
++
++#define OMAP_BEAGLE_WLAN_EN_GPIO (139)
++#define OMAP_BEAGLE_BT_EN_GPIO (138)
++#define OMAP_BEAGLE_WLAN_IRQ_GPIO (137)
++#define OMAP_BEAGLE_FM_EN_BT_WU (136)
++
++struct wl12xx_platform_data omap_beagle_wlan_data __initdata = {
++ .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
++};
++
++static struct ti_st_plat_data wilink_platform_data = {
++ .nshutdown_gpio = OMAP_BEAGLE_BT_EN_GPIO,
++ .dev_name = "/dev/ttyO1",
++ .flow_cntrl = 1,
++ .baud_rate = 3000000,
++ .chip_enable = NULL,
++ .suspend = NULL,
++ .resume = NULL,
++};
++
++static struct platform_device wl12xx_device = {
++ .name = "kim",
++ .id = -1,
++ .dev.platform_data = &wilink_platform_data,
++};
++
++static struct platform_device btwilink_device = {
++ .name = "btwilink",
++ .id = -1,
++};
++#endif
++
++static struct regulator_consumer_supply beagle_vmmc2_supply =
++ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
++
++static struct regulator_init_data beagle_vmmc2 = {
++ .constraints = {
++ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
++ },
++ .num_consumer_supplies = 1,
++ .consumer_supplies = &beagle_vmmc2_supply,
++};
++
++#if IS_ENABLED(CONFIG_WL12XX)
++static struct fixed_voltage_config beagle_vwlan = {
++ .supply_name = "vwl1271",
++ .microvolts = 1800000, /* 1.8V */
++ .gpio = OMAP_BEAGLE_WLAN_EN_GPIO,
++ .startup_delay = 70000, /* 70ms */
++ .enable_high = 1,
++ .enabled_at_boot = 0,
++ .init_data = &beagle_vmmc2,
++};
++
++static struct platform_device omap_vwlan_device = {
++ .name = "reg-fixed-voltage",
++ .id = 1,
++ .dev = {
++ .platform_data = &beagle_vwlan,
++ },
++};
++#endif
++
+ //rcn-ee: this is just a fake regulator, the zippy hardware provides 3.3/1.8 with jumper..
+ static struct fixed_voltage_config beagle_vzippy = {
+ .supply_name = "vzippy",
+@@ -459,6 +526,26 @@ static struct omap2_hsmmc_info mmc_zippy[] = {
+ },
+ {} /* Terminator */
+ };
++
++static struct omap2_hsmmc_info mmcbbt[] = {
++ {
++ .mmc = 1,
++ .caps = MMC_CAP_4_BIT_DATA,
++ .gpio_wp = -EINVAL,
++ .deferred = true,
++ },
++ {
++ .name = "wl1271",
++ .mmc = 2,
++ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
++ .gpio_wp = -EINVAL,
++ .gpio_cd = -EINVAL,
++ .ocr_mask = MMC_VDD_165_195,
++ .nonremovable = true,
++ },
++ {} /* Terminator */
++};
++
+ static struct regulator_consumer_supply beagle_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+ };
+@@ -490,6 +577,13 @@ static int beagle_twl_gpio_setup(struct device *dev,
+ int r;
+
+ switch (expansion_config.mmc_settings) {
++ case EXPANSION_MMC_WIFI:
++ mmcbbt[0].gpio_wp = beagle_config.mmc1_gpio_wp;
++ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
++ mmcbbt[0].gpio_cd = gpio + 0;
++
++ omap_hsmmc_late_init(mmcbbt);
++ break;
+ case EXPANSION_MMC_ZIPPY:
+ mmc_zippy[0].gpio_wp = beagle_config.mmc1_gpio_wp;
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+@@ -839,6 +933,13 @@ static void __init omap3_beagle_init(void)
+ omap_mux_init_gpio(OMAP3BEAGLE_GPIO_ZIPPY_MMC_CD, OMAP_PIN_INPUT);
+ }
+
++ if (!strcmp(expansionboard_name, "bbtoys-wifi"))
++ {
++ #if IS_ENABLED(CONFIG_WL12XX)
++ expansion_config.mmc_settings = EXPANSION_MMC_WIFI;
++ #endif
++ }
++
+ if (!strcmp(expansionboard2_name, "bbtoys-ulcd"))
+ {
+ int r;
+@@ -857,6 +958,10 @@ static void __init omap3_beagle_init(void)
+ omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
+
+ switch (expansion_config.mmc_settings) {
++ case EXPANSION_MMC_WIFI:
++ mmcbbt[0].caps = beagle_config.mmc_caps;
++ omap_hsmmc_init(mmcbbt);
++ break;
+ case EXPANSION_MMC_ZIPPY:
+ mmc_zippy[0].caps = beagle_config.mmc_caps;
+ omap_hsmmc_init(mmc_zippy);
+@@ -922,6 +1027,20 @@ static void __init omap3_beagle_init(void)
+ gpio_export(162, 1);
+ }
+
++ if (!strcmp(expansionboard_name, "bbtoys-wifi"))
++ {
++ #if IS_ENABLED(CONFIG_WL12XX)
++ omap_beagle_wlan_data.irq = gpio_to_irq(OMAP_BEAGLE_WLAN_IRQ_GPIO);
++ if (wl12xx_set_platform_data(&omap_beagle_wlan_data))
++ pr_err("error setting wl12xx data\n");
++ pr_info("Beagle expansionboard: registering wl12xx bt platform device\n");
++ platform_device_register(&wl12xx_device);
++ platform_device_register(&btwilink_device);
++ pr_info("Beagle expansionboard: registering wl12xx wifi platform device\n");
++ platform_device_register(&omap_vwlan_device);
++ #endif
++ }
++
+ if (!strcmp(expansionboard2_name, "bbtoys-ulcd"))
+ {
+ #if IS_ENABLED(CONFIG_TOUCHSCREEN_TSC2007)
+--
+1.7.10.4
+
projects / ipfire-2.x.git / blobdiff