Michael Tremer [Thu, 1 Dec 2022 17:23:16 +0000 (17:23 +0000)]
network: Assign "static" MAC addresses to QMI interfaces
This is really badly hacky, but I do not know a better way to solve this
with our existing "setup" program which would be a nightmare to extend.
So we are using the device number to generate a static MAC address which
can then be used as usual. I doubt many people will have more than one
device.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 1 Dec 2022 17:23:11 +0000 (17:23 +0000)]
network: dhcpcd fails to check link state for QMI interfaces
When acquiring an IP address, dhcpcd seems to think that the interface
is down or does not work properly for some reason. It will
subsequentially decide to exit which is not what we want here.
Therefore this patch tells dhcpcd to ignore the link state and keep
happily running.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 1 Dec 2022 17:23:09 +0000 (17:23 +0000)]
dhcpcd.exe: Run everything no matter how RED is configured
This could potentially create problems when we abuse these functions to
launch the DHCP client on IPTV interfaces. This would have to be tested
and confirmed or potentially we would need some more changes to keep
supporting that use-case, too.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 1 Dec 2022 17:22:55 +0000 (17:22 +0000)]
network: Add support for QMI modems
QMI is a proprietary interface from Qualcomm which are absolute pioneers
when it comes to interfacing with modems. I don't think there would be
any way to make this any more complicated and bloated.
So, bascially we will put the modem into a raw IP mode which changes the
interface into Point-to-Point mode.
We then configure the provider settings using qmicli. After that, the
modem will try to connect to the provider and obtain an IP address.
We will then start a DHCP client which does not do any DHCP-ing because
implementing that would be too complicated. Instead we do something even
*more* complicated where we would launch a custom script which asks the
modem for the allocated IP address and will configure it into the
device. The DHCP client then reads that IP address from the device and
pretends it came up with it by itself. Such an easy way to do this.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Peter Müller [Sat, 17 Dec 2022 14:46:32 +0000 (14:46 +0000)]
backup(.pl): Replace OpenVPN DH parameter with ffdhe4096
This ensures restoring a backup won't silently bring back an insecure
Diffie-Hellman parameter (which could also not be inspected through the
web interface anymore).
Reported-by: Michael Tremer <michael.tremer@ipfire.org> Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Peter Müller [Sun, 11 Dec 2022 11:57:34 +0000 (11:57 +0000)]
Tor: Update to 0.4.7.12
Full changelog:
Changes in version 0.4.7.12 - 2022-12-06
This version contains a major change that is a new key for moria1. Also, new
metrics are exported on the MetricsPort for the congestion control
subsystem.
o Directory authority changes (moria1):
- Rotate the relay identity key and v3 identity key for moria1. They
have been online for more than a decade and refreshing keys
periodically is good practice. Advertise new ports too, to avoid
confusion. Closes ticket 40722.
o Minor feature (Congestion control metrics):
- Add additional metricsport relay metrics for congestion control.
Closes ticket 40724.
o Minor features (fallbackdir):
- Regenerate fallback directories generated on December 06, 2022.
o Minor features (geoip data):
- Update the geoip files to match the IPFire Location Database, as
retrieved on 2022/12/06.
o Minor bugfixes (cpuworker, relay):
- Fix an off by one overload calculation on the number of CPUs being
used by our thread pool. Fixes bug 40719; bugfix on 0.3.5.1-alpha.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Adolf Belka [Mon, 5 Dec 2022 08:40:14 +0000 (09:40 +0100)]
ovpnmain.cgi: Fix for bug in WUI menu on CU172 Testing
- On CU172 Testing Build: master/eb9e29f9 when selecting the OpenVPN menu it showed the
Diffie-Hellman info and pressing back took you to the same DH page.
- Tested patch suggestion from Erik on vm testbed and confirmed that it worked.
Suggested-by: Erik Kapfer <erik.kapfer@ipfire.org> Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Peter Müller [Sat, 3 Dec 2022 10:39:25 +0000 (11:39 +0100)]
Core Update 172: Do not delete liblzma.so.5.2.5
Again, xz currently present on an IPFire machine is linked
against this. Thus, deleting this file causes the unpack
routine to fail, which is why we should have never deleted
it in the first place.
Reported-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Peter Müller [Fri, 2 Dec 2022 08:56:49 +0000 (09:56 +0100)]
Core Update 172: Do not delete libreadline.so.8.1
Doing so causes the shell in which the update script is currently
executed to crash before extracting files, which results in a
completely broken system.
See also: https://community.ipfire.org/t/core-172-testing-fails/9002/1
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Peter Müller [Thu, 1 Dec 2022 09:46:57 +0000 (10:46 +0100)]
ca-certificates: Remove TrustCor Systems root CAs
On November 30, 2022, Mozilla decided to take the following
actions as a response to the concerns raised about the merits
of this root CA operator (excerpt taken from
https://groups.google.com/a/mozilla.org/g/dev-security-policy/c/oxX69KFvsm4/m/yLohoVqtCgAJ):
> 1. Set "Distrust for TLS After Date" and "Distrust for S/MIME
> After Date" to November 30, 2022, for the 3 TrustCor root
> certificates (TrustCor RootCert CA-1, TrustCor ECA-1,
> TrustCor RootCert CA-2) that are currently included in
> Mozilla's root store.
>
> 2. Remove those root certificates from Mozilla's root store
> after the existing end-entity TLS certificates have expired.
As far as the latter is concerned, the offending certificates
have these expiry dates set:
- TrustCor RootCert CA-1: Mon, 31 Dec 2029 17:23:16 GMT
- TrustCor RootCert CA-2: Sun, 31 Dec 2034 17:26:39 GMT
- TrustCor ECA-1: Mon, 31 Dec 2029 17:28:07 GMT
The way IPFire 2 currently processes Mozilla's trust store
does not feature a way of incorporate a "Distrust for XYZ After
Date" attribute. This means that despite TrustCor Systems root
CAs are no longer trusted by browsers using Mozilla's trust
store, IPFire would still accept certificates directly or
indirectly issued by this CA until December 2029 or December 2034.
To protect IPFire users, this patch therefore suggests to
patch our copy of Mozilla's trust store in order to remove
TrustCor Systems' root CAs: The vast majority of HTTPS connections
established from an IPFire machine take place in a non-interactive
context, so there is no security benefit from a "Distrust After
Date" information. Instead, if we do not want IPFire installations
to trust this CA, we have no other option other than remove it
unilaterally from our copy of Mozilla's trust store.
See also: https://lists.ipfire.org/pipermail/development/2022-November/014681.html
Signed-off-by: Peter Müller <peter.mueller@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Fri, 25 Nov 2022 17:38:25 +0000 (18:38 +0100)]
flac: Update to version 1.4.2
- Update from version 1.3.3 to 1.4.2
- Update of rootfile
- several libraries with so bump. Checked with find-dependencies - nothing flagged
- Changelog
This changelog is not exhaustive, review [the git commit log
(https://github.com/xiph/flac/commits) for an exhaustive list of changes.
## FLAC 1.4.2 (22-Oct-2022)
Once again, this release only has a few changes. A problem with FLAC playback in GStreamer (and possibly other libFLAC users) was the reason for the short time since the last release
* General
* Remove xmms plugin (Martijn van Beurden, TokyoBlackHole)
* Remove all pure assembler, removing build dependency on nasm
* Made console output more uniform across different platforms and CPUs
* Improve ability to tune compile for a certain system (for example with -march=native) when combining with --disable-asm-optimizations: plain C functions can now be better optimized
* Build system
* Default CFLAGS are now prepended instead of dropped when user CFLAGS are set
* -msse2 is no longer added by default (was only applicable to x86)
* Fix cross-compiling and out-of-tree building when pandoc and doxygen are not available
* Fix issue with Clang not compiling functions with intrinsics
* Fix detection of bswap intrinsics (Ozkan Sezer)
* Improve search for libssp on MinGW (Ozkan Sezer, Martijn van Beurden)
* libFLAC
* Fix issue when the libFLAC user seeks in a file instead of libFLAC itself
## FLAC 1.4.1 (22-Sep-2022)
This release only has a few changes. It was triggered by a problem in the 1.4.0 tarball: man pages were empty and api documentation missing
* CMake fixes (Tomasz Kłoczko)
* Add checks that man pages and api docs end up in tarball
* Enable installation of prebuilt man pages and api docs
* Fix compiler warnings (Johannes Kauffmann, Ozkan Sezer)
* Fix format specifier (manxorist)
* Enable building on Universal Windows Platform (Steve Lhomme)
* Fix versioning from git
## FLAC 1.4.0 (09-Sep-2022)
As there have been changes to the library interfaces, the libFLAC version number is incremented to 12, the libFLAC++ version number is incremented to 10. As some changes were breaking, the version age numbers (see [libtool versioning](https://www.gnu.org/software/libtool/manual/libtool.html#Libtool-versioning)) have been reset to 0. For more details on the changes to the API, see the [porting guide](https://xiph.org/flac/api/group__porting__1__3__4__to__1__4__0.html).
The XMMS plugin and 'common' plugin code (used only by the XMMS plugin) are deprecated, they will be removed in a future release.
* General:
* It is now possible to limit the minimum bitrate of a FLAC file generated by libFLAC and with the `flac` tool to 1 bit/sample. This function can be used to aid live streaming, for example for internet radio
* Encoding files with sample rates up to 1'048'575Hz is now possible. (Con Kolivas)
* Compression of preset -3 through -8 was slightly improved at the cost of a small decrease in encoding speed by increasing the precision with which autocorrelation was calculated (Martijn van Beurden)
* Encoding speed of preset -0, -1 and -2 was slightly improved
* Compression of presets -1 and -4 was slighly improved on certain material by changing the adaptive mid-side heuristics
* Speedups specifically targeting 64-bit ARMv8 devices using NEON were integrated (Ronen Gvili, Martijn van Beurden)
* Speedups for x86_64 CPUs having the FMA instruction set extention are added
* Encoding and decoding of 32-bit PCM is now possible
* (Ogg) FLAC format:
* The FLAC format document is being rewritten by the IETF CELLAR working group. The latest draft can be found on [https://datatracker.ietf.org/doc/draft-ietf-cellar-flac/](https://datatracker.ietf.org/doc/draft-ietf-cellar-flac/)
* The FLAC format document specifies no bounds for the residual. In other to match current decoder implementations, it is proposed to bound the residual to the range provided by a 32-bit int signed two's complement. This limit must be checked by FLAC encoders as to keep FLAC decoders free from the complexity of being to decode a residual exceeding a 32-bit int.
* There is now a set of files available to test whether a FLAC decoder implements the format correctly. This FLAC decoder testbench can be found at [https://github.com/ietf-wg-cellar/flac-test-files](https://github.com/ietf-wg-cellar/flac-test-files). Also, results of testing hard- and software can be found here at [https://wiki.hydrogenaud.io/index.php?title=FLAC_decoder_testbench](https://wiki.hydrogenaud.io/index.php?title=FLAC_decoder_testbench).
* flac:
* The option --limit-min-bitrate was added to aid streaming, see [github #264](https://github.com/xiph/flac/pull/264)
* The option --keep-foreign-metadata-if-present is added. This option works the same as --keep-foreign-metadata, but does return a warning instead of an error if no foreign metadata was found to store or restore
* The warning returned by the foreign metadata handling is now clearer in case a user tries to restore foreign metadata of the wrong type, for example decoding a FLAC file containing AIFF foreign metadata to a WAV file
* A problem when using the analyse function causing the first frame to have a wrong size and offset was fixed
* Fix bug where channel mask of a file is unintentionally reused when several files are processed with one command
* The order of compression-related commands is no longer important, i.e. -8ep gives the same result as -ep8. Previously, a compression level (like -8) would override a more specific setting (like -e or -p). This is no longer the case
* flac now checks the block-align property of WAV files to ensure non-standard WAV files (for which flac has no handling) are not mangled
* metaflac:
* (none)
* build system:
* MSVC and Makefile.lite build system files have been removed. Building with MSVC (Visual Studio) can be done by using CMake
* Various CMake improvements, especially for creating MSVC build files (Martijn van Beurden, martinRenou, CookiePLMonster, David Callu, Tyler Dunn, Cameron Cawley)
* Various fixes for MinGW (Martijn van Beurden, Cameron Cawley)
* Removed obsolete autotools macro's to silence warnings
* Fixes for FreeBSD PowerPC (pkubaj)
* Fixed some compiler warnings (Martijn van Beurden, Tyler Dunn)
* Fix building with uclibc (Fabrice Fontaine)
* testing/validation:
* Addition of new encoder fuzzer, adding fuzzing for 8, 24 and 32-bit inputs
* Addition of new decoder fuzzer, adding coverage of seeking code
* Addition of metadata fuzzer, adding coverage of metadata APIs
* Various improvements to fuzzers to improve code coverage, fuzzing speed and stability
* Many changes to test suite to improve cross-platform compatibility (Rosen Penev)
* Windows CI now also builds the whole test suite
* Clang-format file added (Rosen Penev)
* Add warning on using v141_xp platform toolset with /MT (Martijn van Beurden, Paul Sanders)
* libraries:
* Various seeking fixes (Martijn van Beurden, Robert Kausch)
* Various bugs fixed found by fuzzing
* On decoding, it is now checked whether residuals can be contained by a 32-bit int, preventing integer overflow
* Add check that samples supplied to libFLAC actually fall within the bps set
* Add checks when parsing metadata blocks to not allocate excessive amounts of memory and not overread
* Undocumented Windows-only utf8 functions are no longer exported to the DLL interface
* Removed all assembler and intrinsics code from the decoder to improve fuzzing, as they provided only a small speed benefit
* The bitwriter buffer is limited in size to 2^24 bytes, so it cannot write excessively large files. This is a backup in case another bug in this area creeps (back) in.
* The metadata iterations should now never return a vorbiscomment entry with NULL as an entry, now always at least an empty string is returned
* documentation:
* Removed html documentation and generate man pages from markdown
* Interface changes:
* libFLAC:
* Addition of FLAC__stream_encoder_set_limit_min_bitrate() and FLAC__stream_encoder_get_limit_min_bitrate(), see [github #264](https://github.com/xiph/flac/pull/264)
* get_client_data_from_decoder is renamed FLAC__get_decoder_client_data(), see [github #124](https://github.com/xiph/flac/pull/124)
* All API functions taking a filename as an argument now take UTF-8 filenames on Windows, and no longer accept filenames using the current codepage
* FLAC__Frame struct has changed: warmup samples are now stored in FLAC__int64 instead of FLAC__int32 types, and verbatim samples can now be stored in either FLAC__int32 or FLAC__int64 depending on whether samples fix the former or latter
* The FLAC__StreamMetadata struct now has a tag, so it can be forward declared
* libFLAC++:
* Addition of ::set_limit_min_bitrate() and ::get_limit_min_bitrate(), see [github #264](https://github.com/xiph/flac/pull/264)
* All API functions taking a filename as an argument now take UTF-8 filenames on Windows, and no longer accept filenames using the current codepage
* The ::FLAC__Frame struct has changed, see the libFLAC interface change.
## FLAC 1.3.4 (20-Feb-2022)
This release mostly fixes (security related) bugs. When building with MSVC, using CMake is preferred, see the README under "Building with CMake" for more information. Building with MSVC using solution files is deprecated and these files will be removed in the future. As there have been no changes to the library interfaces, the libFLAC version number remains 11, and libFLAC++ version number remains 9.
* General:
* Fix 12 decoder bugs found by oss-fuzz, including CVE-2020-0499 (erikd, Martijn van Beurden)
* Fix encoder bug CVE-2021-0561 (NeelkamalSemwal)
* Integrate oss-fuzzers (erikd, Guido Vranken)
* Seeking fixes (NeelkamalSemwal, Robert Kausch)
* Various fixes and improvements (Andrei Astafev, Rosen Penev, Håkan Kvist, oreo639, erikd, Tamás Zahola, Ulrik Mikaelsson, Tyler Dunn, tmkk)
* FLAC format:
* (none)
* Ogg FLAC format:
* (none)
* flac:
* Various fixes and improvements (Andrei Astafev, Martijn van Beurden)
* metaflac:
* (none)
* build system:
* CMake improvements (evpobr, Vitaliy Kirsanov, erikd, Ozkan Sezer, Tyler Dunn, tg-m DeadSix27, ericLemanissier, Chocobo1).
* Fixes for MinGW and MSVC (Ozkan Sezer).
* Fix for clang (Ozkan Sezer)
* Fix for PowerPC (Peter Seiderer, Thomas BERNARD)
* Fix for FreeBSD PowerPC (pkubaj).
* testing/validation:
* Add Windows target to CI, improve logging (Ralph Giles)
* CI improvements (Ralph Giles, Ewout ter Hoeven)
* documentation:
* Doxygen fixes (Tyler Dunn)
* Fix typos (Tim Gates, maxz)
* Interface changes:
* libFLAC:
* (none)
* libFLAC++:
* (none)
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Mon, 28 Nov 2022 13:24:15 +0000 (14:24 +0100)]
make.sh: Update check for static linked qemu files
- In Arch Linux the file -L command comes up with "static-pie linked" instead of
"statically linked"
- This patch makes the grep look for either one of those strings.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Mon, 28 Nov 2022 13:24:00 +0000 (14:24 +0100)]
sysstat: Update to version 12.7.1
- Update from version 12.5.4 to 12.7.1
- Update of rootfile
- Changelog
2022/11/06: Version 12.7.1:
Fix possible overflow in sa_common.c (GHSL-2022-074) [12.6.1].
sadf: Add support for option -t with SVG output to make it possible to display timestamps in the same locale as that of the file creator.
sadf: Print timezone instead of UTC in true time mode. Timezone is also displayed in local time.
sadf: PCP: Fix timestamps written to PCP archive file.
sar: Add new environment variable S_REPEAT_HEADER.
pidstat: Return exit code of the process that was monitored with option -e.
mpstat: Add option -H to handle vCPU physical hotplug.
Add local, xlocal and debug targets to iconfig script.
Turn off gcc's tree-slp-vectorize option which was making sadf crash in some situations.
sa_conv.c: Make size of statistics structures from older sysstat versions immutable [12.6.1].
[Bernhard M. Wiedemann]: Declare sadc dependency on libsyscom.a [12.6.1].
[Steve Kay]: Fix gcc v11.2 warnings [12.6.1].
[Steve Kay]: Various cosmetic fixes [12.6.1].
[Jan Christoph Uhde]: sar: Remove `-I int_list` from man-page and help [12.6.1].
[Frank Dana]: Consolidate systemctl commands in README file [12.6.1].
[Rong Tao]: Remove whitespace characters at the end of lines [12.6.1].
Update configure file to deal with newer autoconf version. configure.in file is renamed to configure.ac.
Update DTD and XSD documents.
sar and sysstat manual pages updated.
NLS updated. Add new Georgian translation.
Non regression tests updated.
2022/05/29: Version 12.6.0:
sar: Fix maximum value for A_IRQ activity.
sar/sadf: A_NET_SOFT: Add new metric softnet network backlog.
sadc: A_NET_SOFT: Use CPU id from /proc/net/softnet_stat.
Update DTD and XSD documents (softnet backlog).
[Chris Bagwell]: sar/sadf: Convert 64-bit time value to time_t as needed.
sadf: Add basic colorization to sadf's output.
sadf: Add sanity checks on values read from file.
sadf: PCP: Fix multiple metrics name problems.
sa_common.c: Remove unneeded variable assignment.
[Lukáš Zaoral]: Take into account LDFLAGS passer to configure script.
Various janitorial fixes and updated.
Update FAQ.
Update sar manual page.
Update NLS translations.
Update non regression tests.
2022/02/28: Version 12.5.6:
sar/sadc: Rewrite code used to collect and display interrupts statistics. Statistics are now collected from /proc/interrupts (instead of /proc/stat) and are displayed for each installed CPU.
sar/sadf: Add new "--int=" option to enter a list of interrupts on the command line.
sadf: Update the various output formats to deal with the new per-CPU interrupts statistics.
Update DTD and XSD documents. CPU elements may be non-existent when all selected CPU are offline.
Update sar and sadf manual pages.
mpstat: Create its own function to read the total number of interrupts from /proc/stat file.
mpstat: Remove unneeded "aligned" attribute from struct stats_irqcpu definition.
sar: Fix index value used in online_cpu_bitmap array.
sar/sadf: Make sure that datafiles with unknown activities can be read by sar and sadf [12.4.5].
sar/sadf: Don't reallocate buffers for activities not present in file [12.4.5].
sar: Make sure that all buffers are copied in copy_structures() function [12.4.5].
PCP: Fix flow_limit_count metric's unit (A_NET_SOFT activity).
PCP: Fix instance names for getattr call (A_NET_NFS(D) activities).
Use sizeof() macro instead of hard-coded values with snprintf() functions.
rndr_stats.c: Use NOVAL instead of NULL as last argument for cons() function.
Use strings definitions whenever possible.
Add new non regression tests. Update some existing ones.
Various cosmetic fixes.
2021/12/05: Version 12.5.5:
iostat: Add --compact option.
iostat: Always display persistent names with option -j [12.4.4].
iostat: Fix how device mapper names are taken into account when entered on the command line [12.4.4].
iostat: Update manual page.
mpstat: Don't display offline CPU [12.4.4].
mpstat: Fix values displayed when an offline CPU goes back online [12.4.4].
mpstat: Fix untrusted loop bound [12.4.4].
mpstat: Update non regression tests [12.4.4].
sar: Tell the user to convert the file when needed.
sadc: Reuse count results for sub-items.
[Ville Skyttä]: Use `grep -E` instead of deprecated `egrep` [12.4.4].
[Ville Skyttä]: Spelling and grammar fixes [12.4.4].
Update FAQ.
[Nathan Naze]: Update man pages with correct spelling of "JavaScript" [12.4.4].
Update non regression tests.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Mon, 28 Nov 2022 13:23:49 +0000 (14:23 +0100)]
samba: Update to version 4.17.3
- Update from version 4.17.0 to 4.17.3
- Update of rootfile (x86_64) - other architectures will need to be adjusted.
- Changelog
Release Notes for Samba 4.17.3
This is a security release in order to address the following defects:
o CVE-2022-42898: Samba's Kerberos libraries and AD DC failed to guard against
integer overflows when parsing a PAC on a 32-bit system, which
allowed an attacker with a forged PAC to corrupt the heap.
https://www.samba.org/samba/security/CVE-2022-42898.html
o Joseph Sutton <josephsutton@catalyst.net.nz>
* BUG 15203: CVE-2022-42898
o Nicolas Williams <nico@twosigma.com>
* BUG 15203: CVE-2022-42898
Release Notes for Samba 4.17.2
This is a security release in order to address the following defects:
o CVE-2022-3437: There is a limited write heap buffer overflow in the GSSAPI
unwrap_des() and unwrap_des3() routines of Heimdal (included
in Samba).
https://www.samba.org/samba/security/CVE-2022-3437.html
o CVE-2022-3592: A malicious client can use a symlink to escape the exported
directory.
https://www.samba.org/samba/security/CVE-2022-3592.html
o Volker Lendecke <vl@samba.org>
* BUG 15207: CVE-2022-3592.
o Joseph Sutton <josephsutton@catalyst.net.nz>
* BUG 15134: CVE-2022-3437.
Release Notes for Samba 4.17.1
o Jeremy Allison <jra@samba.org>
* BUG 14611: CVE-2021-20251 [SECURITY] Bad password count not incremented
atomically.
* BUG 15174: smbXsrv_connection_shutdown_send result leaked.
* BUG 15182: Flush on a named stream never completes.
* BUG 15195: Permission denied calling SMBC_getatr when file not exists.
o Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
* BUG 15189: Samba 4.5 sometimes cannot be upgraded to Samba 4.6 or later
over DRS: WERROR_DS_DRA_MISSING_PARENT due to faulty GET_ANC.
* BUG 15191: pytest: add file removal helpers for TestCaseInTempDir.
o Andrew Bartlett <abartlet@samba.org>
* BUG 14611: CVE-2021-20251 [SECURITY] Bad password count not incremented
atomically.
* BUG 15189: Samba 4.5 sometimes cannot be upgraded to Samba 4.6 or later.
over DRS: WERROR_DS_DRA_MISSING_PARENT due to faulty GET_ANC.
o Ralph Boehme <slow@samba.org>
* BUG 15182: Flush on a named stream never completes.
o Volker Lendecke <vl@samba.org>
* BUG 15151: vfs_gpfs silently garbles timestamps > year 2106.
o Gary Lockyer <gary@catalyst.net.nz>
* BUG 14611: CVE-2021-20251 [SECURITY] Bad password count not incremented
atomically.
o Stefan Metzmacher <metze@samba.org>
* BUG 15200: multi-channel socket passing may hit a race if one of the
involved processes already existed.
* BUG 15201: memory leak on temporary of struct imessaging_post_state and
struct tevent_immediate on struct imessaging_context (in
rpcd_spoolss and maybe others).
o Noel Power <noel.power@suse.com>
* BUG 15205: Since popt1.19 various use after free errors using result of
poptGetArg are now exposed.
o Anoop C S <anoopcs@samba.org>
* BUG 15192: Remove special case for O_CREAT in SMB_VFS_OPENAT from
vfs_glusterfs.
o Andreas Schneider <asn@samba.org>
* BUG 15169: GETPWSID in memory cache grows indefinetly with each NTLM auth.
o Joseph Sutton <josephsutton@catalyst.net.nz>
* BUG 14611: CVE-2021-20251 [SECURITY] Bad password count not incremented
atomically.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Mon, 28 Nov 2022 13:23:38 +0000 (14:23 +0100)]
rsync: Update to version 3.2.7
- Update from version 3.2.6 to 3.2.7
- Update of rootfile not required
- Changelog
# NEWS for rsync 3.2.7 (20 Oct 2022)
### BUG FIXES:
- Fixed the client-side validating of the remote sender's filtering behavior.
- More fixes for the "unrequested file-list name" name, including a copy of
"/" with `--relative` enabled and a copy with a lot of related paths with
`--relative` enabled (often derived from a `--files-from` list).
- When rsync gets an unpack error on an ACL, mention the filename.
- Avoid over-setting sanitize_paths when a daemon is serving "/" (even if
"use chroot" is false).
### ENHANCEMENTS:
- Added negotiated daemon-auth support that allows a stronger checksum digest
to be used to validate a user's login to the daemon. Added SHA512, SHA256,
and SHA1 digests to MD5 & MD4. These new digests are at the highest priority
in the new daemon-auth negotiation list.
- Added support for the SHA1 digest in file checksums. While this tends to be
overkill, it is available if someone really needs it. This overly-long
checksum is at the lowest priority in the normal checksum negotiation list.
See [`--checksum-choice`](rsync.1#opt) (`--cc`) and the `RSYNC_CHECKSUM_LIST`
environment var for how to customize this.
- Improved the xattr hash table to use a 64-bit key without slowing down the
key's computation. This should make extra sure that a hash collision doesn't
happen.
- If the `--version` option is repeated (e.g. `-VV`) then the information is
output in a (still readable) JSON format. Client side only.
- The script `support/json-rsync-version` is available to get the JSON style
version output from any rsync. The script accepts either text on stdin
**or** an arg that specifies an rsync executable to run with a doubled
`--version` option. If the text we get isn't already in JSON format, it is
converted. Newer rsync versions will provide more complete json info than
older rsync versions. Various tweaks are made to keep the flag names
consistent across versions.
- The [`use chroot`](rsyncd.conf.5#) daemon parameter now defaults to "unset"
so that rsync can use chroot when it works and a sanitized copy when chroot
is not supported (e.g., for a non-root daemon). Explicitly setting the
parameter to true or false (on or off) behaves the same way as before.
- The `--fuzzy` option was optimized a bit to try to cut down on the amount of
computations when considering a big pool of files. The simple heuristic from
Kenneth Finnegan resuled in about a 2x speedup.
- If rsync is forced to use protocol 29 or before (perhaps due to talking to an
rsync before 3.0.0), the modify time of a file is limited to 4-bytes. Rsync
now interprets this value as an unsigned integer so that a current year past
2038 can continue to be represented. This does mean that years prior to 1970
cannot be represented in an older protocol, but this trade-off seems like the
right choice given that (1) 2038 is very rapidly approaching, and (2) newer
protocols support a much wider range of old and new dates.
- The rsync client now treats an empty destination arg as an error, just like
it does for an empty source arg. This doesn't affect a `host:` arg (which is
treated the same as `host:.`) since the arg is not completely empty. The use
of [`--old-args`](rsync.1#opt) (including via `RSYNC_OLD_ARGS`) allows the
prior behavior of treating an empty destination arg as a ".".
### PACKAGING RELATED:
- The checksum code now uses openssl's EVP methods, which gets rid of various
deprecation warnings and makes it easy to support more digest methods. On
newer systems, the MD4 digest is marked as legacy in the openssl code, which
makes openssl refuse to support it via EVP. You can choose to ignore this
and allow rsync's MD4 code to be used for older rsync connections (when
talking to an rsync prior to 3.0.0) or you can choose to configure rsync to
tell openssl to enable legacy algorithms (see below).
- A simple openssl config file is supplied that can be installed for rsync to
use. If you install packaging/openssl-rsync.cnf to a public spot (such as
`/etc/ssl/openssl-rsync.cnf`) and then run configure with the option
`--with-openssl-conf=/path/name.cnf`, this will cause rsync to export the
configured path in the OPENSSL_CONF environment variable (when the variable
is not already set). This will enable openssl's MD4 code for rsync to use.
- The packager may wish to include an explicit "use chroot = true" in the top
section of their supplied /etc/rsyncd.conf file if the daemon is being
installed to run as the root user (though rsync should behave the same even
with the value unset, a little extra paranoia doesn't hurt).
- I've noticed that some packagers haven't installed support/nameconvert for
users to use in their chrooted rsync configs. Even if it is not installed
as an executable script (to avoid a python3 dependency) it would be good to
install it with the other rsync-related support scripts.
- It would be good to add support/json-rsync-version to the list of installed
support scripts.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Mon, 28 Nov 2022 13:23:27 +0000 (14:23 +0100)]
poppler: Update to version 22.11.0
- Update from 22.04.0 to 22.11.0
- Update of rootfile
- Changelog
Release 22.11.0:
core:
* CairoOutputDev: Update font after restore
* Protect against broken files
* Small code refactoring
Release 22.10.0:
core:
* SplashOutputDev::tilingPatternFill: Properly restore CTM on failure. Issue #1292
* Protect against malformed files
* Refactor code to not use strndup
* Other small code refactoring
utils:
* pdftoppm: Avoid round-off errors when determining raster dimensions
* pdftocairo: Avoid round-off errors when determining raster dimensions
* pdftotext: Simplify memory handling
qt:
* Take into account flagNoView when getting/setting the visible status. KDE bug #456313
build system:
* Fix sed invocation
Release 22.09.0:
core:
* Splash: Do not truncate line dash patterns with more than 20 entries. Issue #1281
* Various signature related improvements
* Fix FormField::getFullyQualifiedName in some scenarios
* Splash: Small optimization on dash pattern handling
* JBIG2Stream::readHalftoneRegionSeg: Fix potential memory leak
* Fix crashes on malformed files. Including CVE-2022-38784
* Fix string formatting in error reporting
glib:
* Fix two potential memory leaks in poppler_document_create_dests_tree
utils:
* pdfsig: List signature field names when listing signature information
* pdfsig: Add support for specifying signature by field name
* pdfunite: Fix crashes on malformed files
* pdfunite: Fix potential memory leak of docs
Release 22.08.0:
core:
* Fix rendering text on some forms
* CairoOutputDev: Support Type3 charprocs having Resources
* Fix crashes on malformed files
Release 22.07.0:
core:
* Fix crash when filling in forms in some files. Issue #1258
* Fix first lines of Annotations sometimes being cut off. Issue #1246
* Signatures: Don't crash if the signature doesn't have a common name
* CairoFontEngine: increment font_face reference when retrieving from the cache
* Add ToUnicode support for lessorequalslant and greaterorequalslant
glib:
* Add support for stamp annotation
build system:
* Tweaks on how gperf is run
Release 22.06.0:
core:
* Forms: Fix crash in forms with their own DR
* Refactor CairoFontEngine caching
* CairoOutputDev: preserve text color when drawing type 3 glyphs
* Windows: font code simplification
* Minor code improvements
cpp:
* Add missing header
utils:
* pdfattach: Assume filename is utf8 encoded
* pdftohtml: Fix type 3 font size calculation
Release 22.05.0:
core:
* Annotations: Make sure we embed fonts for the FreeText annots
* Forms: Make sure we embedd fonts as needed
* Signatures: Make sure we embed the needed fonts
* CairoOutputDev: color type 3 fonts
* fix two bugs in multiline find_text()
* code improvements
utils:
* pdftotext: added TSV mode
* HtmlOutputDev: don't use png.h
cpp:
* Use time_t for time
* Add page_transition::durationReal
qt:
* Pass leftFontSize down to `FormWidgetSignature::signDocumentWithAppearence`
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Mon, 28 Nov 2022 13:23:14 +0000 (14:23 +0100)]
meson: Update to version 0.64.1
- Update from version 0.62.1 to 0.64.1
- Update of rootfile
- Changelog is too long to include here. Details can be found at
0.63.0 https://mesonbuild.com/Release-notes-for-0-63-0.html
0.64.0 https://mesonbuild.com/Release-notes-for-0-64-0.html
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Mon, 28 Nov 2022 13:22:49 +0000 (14:22 +0100)]
lsof: Update to version 4.96.4
- Update from version 4.95.0 to 4.96.4
- Update of rootfile not required
- bz2 version of source tarball is no longer provided.
- Changelog
4.96.4 October 18, 2022
[FreeBSD] sys/files.h no longer needs _KERNEL defined to
include it (bsdimp #256)
docs: Describe fd number truncation in output (#261)
4.96.3 September 16, 2022
[FreeBSD] Fix kqueue compat for releases < 14
4.96.2 September 16, 2022
[FreeBSD] fix FreeBSD < 14
4.96.1 September 16, 2022
[FreeBSD] Unconditionally define HASKQUEUE (mjguzik)
4.96.0 September 16, 2022
[linux] fix hash functions used for finding local tcp/udp IPCs
There were typos in the code calculating hash values. The typos might
break the flatness of hashtables where the endpoint information about
locally used tcp/udp was stored. Theoretically, this fix may improve
the performance of lsof with [+|-]E option.
Inspired by the issue #206 reported by Tomasz Kłoczko (@kloczek).
Show copyright notice in --version output.
[linux] compile with -Wall option
[linux] Avoid some easy collissions for udp/udp6 sockets when hashing
[linux] Changing the number of ipcbuckets to 4096
[darwin] fix build with -fno-common (Cfp redefinition)
gcc-10 and llvm-11 changed the default from -fcommon to -fno-common:
https://gcc.gnu.org/PR85678
As a result build fails as:
duplicate symbol '_Cfp' in: ddev.o dfile.o
Cfp is already explicitly defined in dstore.c. The change turns
header definition into declaration.
Provided by Sergei Trofimovich (@trofi) in #221. The same fix is
applied to libproc backend by Jiajie Chen (@jiegec) in #226.
[linux] Make build reproducible by checking SOURCE_DATE_EPOCH
and considering LSOF_{HOST,LOGNAME,SYSINFO,USER} as "none" when
it is set.
Provided by Danilo Spinella in #217
[darwin] remove /usr/include prefix from include for Darwin 19+
The /usr/include path is missing since macOS Catalina.
Fixes issue #234.
Provided by Jiajie Chen in #235
[linux] obtain correct information of memory-mapped file.
Provided by Teng Hu in #239
[FreeBSD] configure: suggest variable to set if FreeBSD sys not found
submitted by @emaste
Updated 00FAQ with lookup to open files via mountpoint
Provided by Jacob Chapman in #240
[FreeBSD] modernize API usage and remove legacy FreeBSD releases
Contributor DamjanJovanovic (#184) Ed Maste (#250, #251, #252),
Warner Losh (#253)
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Mon, 28 Nov 2022 17:24:21 +0000 (18:24 +0100)]
gnu-netcat: Removal of package
- gnu-netcat was last updated in 2004 and is not used as a dependency for any IPFire
addon.
- IPFire has ncat which is used as a dependency for ipfire-netboot, libshout, libvirt
and squid. gnu-netcat not being required for libvcirt was confirmed by Jonatan.
- nmap/ncat is being actively updated.
- Based on the above this patch is removing gnu-netcat from IPFire.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Mon, 28 Nov 2022 17:24:36 +0000 (18:24 +0100)]
sdl2: Update to version 2.26.0
- Update from version 2.0.22 to 2.26.0
- Update of rootfile
- Changelog
2.26.0:
General:
* Updated OpenGL headers to the latest API from The Khronos Group Inc.
* Added SDL_GetWindowSizeInPixels() to get the window size in pixels, which may differ from the window coordinate size for windows with high-DPI support
* Added simulated vsync synchronization for the software renderer
* Added the mouse position to SDL_MouseWheelEvent
* Added SDL_ResetHints() to reset all hints to their default values
* Added SDL_GetJoystickGUIDInfo() to get device information encoded in a joystick GUID
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_XBOX_360 to control whether the HIDAPI driver for XBox 360 controllers should be used
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_XBOX_360_PLAYER_LED to control whether the player LEDs should be lit to indicate which player is associated with an Xbox 360 controller
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_XBOX_360_WIRELESS to control whether the HIDAPI driver for XBox 360 wireless controllers should be used
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_XBOX_ONE to control whether the HIDAPI driver for XBox One controllers should be used
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_XBOX_ONE_HOME_LED to control the brightness of the XBox One guide button LED
* Added support for PS3 controllers to the HIDAPI driver, enabled by default on macOS, controlled by the SDL_HINT_JOYSTICK_HIDAPI_PS3 hint
* Added support for Nintendo Wii controllers to the HIDAPI driver, not enabled by default, controlled by the SDL_HINT_JOYSTICK_HIDAPI_WII hint
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_WII_PLAYER_LED to control whether the player LED should be lit on the Nintendo Wii controllers
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_VERTICAL_JOY_CONS to control whether Nintendo Switch Joy-Con controllers will be in vertical mode when using the HIDAPI driver
* Added access to the individual left and right gyro sensors of the combined Joy-Cons controller
* Added a microsecond timestamp to SDL_SensorEvent and SDL_ControllerSensorEvent, when the hardware provides that information
* Added SDL_SensorGetDataWithTimestamp() and SDL_GameControllerGetSensorDataWithTimestamp() to retrieve the last sensor data with the associated microsecond timestamp
* Added the hint SDL_HINT_HIDAPI_IGNORE_DEVICES to have the SDL HID API ignore specific devices
* SDL_GetRevision() now includes more information about the SDL build, including the git commit hash if available
Windows:
* Added the hint SDL_HINT_MOUSE_RELATIVE_SYSTEM_SCALE to control whether the system mouse acceleration curve is used for relative mouse motion
macOS:
* Implemented vsync synchronization on macOS 12
Linux:
* Added SDL_SetPrimarySelectionText(), SDL_GetPrimarySelectionText(), and SDL_HasPrimarySelectionText() to interact with the X11 primary selection clipboard
* Added the hint SDL_HINT_VIDEO_WAYLAND_EMULATE_MOUSE_WARP to control whether mouse pointer warp emulation is enabled under Wayland
Android:
* Enabled IME soft keyboard input
* Added version checking to make sure the SDL Java and C code are compatible
2.24.0:
General:
* New version numbering scheme, similar to GLib and Flatpak.
* An even number in the minor version (second component) indicates a production-ready stable release such as 2.24.0, which would have been 2.0.24 under the old system.
* The patchlevel (micro version, third component) indicates a bugfix-only update: for example, 2.24.1 would be a bugfix-only release to fix bugs in 2.24.0, without adding new features.
* An odd number in the minor version indicates a prerelease such as 2.23.0. Stable distributions should not use these prereleases.
* The patchlevel indicates successive prereleases, for example 2.23.1 and 2.23.2 would be prereleases during development of the SDL 2.24.0 stable release.
* Added SDL_GetPointDisplayIndex() and SDL_GetRectDisplayIndex() to get the display associated with a point and rectangle in screen space
* Added SDL_bsearch(), SDL_crc16(), and SDL_utf8strnlen() to the stdlib routines
* Added SDL_CPUPauseInstruction() as a macro in SDL_atomic.h
* Added SDL_size_mul_overflow() and SDL_size_add_overflow() for better size overflow protection
* Added SDL_ResetHint() to reset a hint to the default value
* Added SDL_ResetKeyboard() to reset SDL's internal keyboard state, generating key up events for all currently pressed keys
* Added the hint SDL_HINT_MOUSE_RELATIVE_WARP_MOTION to control whether mouse warping generates motion events in relative mode. This hint defaults off.
* Added the hint SDL_HINT_TRACKPAD_IS_TOUCH_ONLY to control whether trackpads are treated as touch devices or mice. By default touchpads are treated as mouse input.
* The hint SDL_HINT_JOYSTICK_HIDAPI_JOY_CONS now defaults on
* Added support for mini-gamepad mode for Nintendo Joy-Con controllers using the HIDAPI driver
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_COMBINE_JOY_CONS to control whether Joy-Con controllers are automatically merged into a unified gamepad when using the HIDAPI driver. This hint defaults on.
* The hint SDL_HINT_JOYSTICK_HIDAPI_SWITCH_HOME_LED can be set to a floating point value to set the brightness of the Home LED on Nintendo Switch controllers
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_JOYCON_HOME_LED to set the Home LED brightness for the Nintendo Joy-Con controllers. By default the Home LED is not modified.
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_SWITCH_PLAYER_LED to control whether the player LED should be lit on the Nintendo Joy-Con controllers
* Added support for Nintendo Online classic controllers using the HIDAPI driver
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_NINTENDO_CLASSIC to control whether the HIDAPI driver for Nintendo Online classic controllers should be used
* Added support for the NVIDIA Shield Controller to the HIDAPI driver, supporting rumble and battery status
* Added support for NVIDIA SHIELD controller to the HIDAPI driver, and a hint SDL_HINT_JOYSTICK_HIDAPI_SHIELD to control whether this is used
* Added functions to get the platform dependent name for a joystick or game controller:
* SDL_JoystickPathForIndex()
* SDL_JoystickPath()
* SDL_GameControllerPathForIndex()
* SDL_GameControllerPath()
* Added SDL_GameControllerGetFirmwareVersion() and SDL_JoystickGetFirmwareVersion(), currently implemented for DualSense(tm) Wireless Controllers using HIDAPI
* Added SDL_JoystickAttachVirtualEx() for extended virtual controller support
* Added joystick event SDL_JOYBATTERYUPDATED for when battery status changes
* Added SDL_GUIDToString() and SDL_GUIDFromString() to convert between SDL GUID and string
* Added SDL_HasLSX() and SDL_HasLASX() to detect LoongArch SIMD support
* Added SDL_GetOriginalMemoryFunctions()
* Added SDL_GetDefaultAudioInfo() to get the name and format of the default audio device, currently implemented for PipeWire, PulseAudio, WASAPI, and DirectSound
* Added HIDAPI driver for the NVIDIA SHIELD controller (2017 model) to enable support for battery status and rumble
* Added support for opening audio devices with 3 or 5 channels (2.1, 4.1). All channel counts from Mono to 7.1 are now supported.
* Rewrote audio channel converters used by SDL_AudioCVT, based on the channel matrix coefficients used as the default for FAudio voices
* SDL log messages are no longer limited to 4K and can be any length
* Fixed a long-standing calling convention issue with dynapi affecting OpenWatcom or OS/2 builds
Windows:
* Added initial support for building for Windows and Xbox with Microsoft's Game Development Kit (GDK), see docs/README-gdk.md for details
* Added a D3D12 renderer implementation and SDL_RenderGetD3D12Device() to retrieve the D3D12 device associated with it
* Added the hint SDL_HINT_WINDOWS_DPI_AWARENESS to set whether the application is DPI-aware. This hint must be set before initializing the video subsystem
* Added the hint SDL_HINT_WINDOWS_DPI_SCALING to control whether the SDL coordinates are in DPI-scaled points or pixels
* Added the hint SDL_HINT_DIRECTINPUT_ENABLED to control whether the DirectInput driver should be used
* Added support for SDL_GetAudioDeviceSpec to the DirectSound backend
Linux:
* Support for XVidMode has been removed, mode changes are only supported using the XRandR extension
* Added the hint SDL_HINT_VIDEO_WAYLAND_MODE_EMULATION to control whether to expose a set of emulated modes in addition to the native resolution modes available on Wayland
* Added the hint SDL_HINT_KMSDRM_DEVICE_INDEX to specify which KMSDRM device to use if the default is not desired
* Added the hint SDL_HINT_LINUX_DIGITAL_HATS to control whether to treat hats as digital rather than checking to see if they may be analog
* Added the hint SDL_HINT_LINUX_HAT_DEADZONES to control whether to use deadzones on analog hats
macOS:
* Bumped minimum OS deployment version to macOS 10.9
* Added SDL_GL_FLOATBUFFERS to allow Cocoa GL contexts to use EDR
* Added the hint SDL_HINT_MAC_OPENGL_ASYNC_DISPATCH to control whether dispatching OpenGL context updates should block the dispatching thread until the main thread finishes processing. This hint defaults to blocking, which is the safer option on modern macOS.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Sat, 26 Nov 2022 13:43:03 +0000 (14:43 +0100)]
liburcu: Update to version 0.13.2
- Update from version 0.13.0 to 0.13.2
- Update of rootfile
- Changelog
2022-08-18 Userspace RCU 0.13.2
* Revert "Fix: remove type constness in URCU_FORCE_CAST's C++ version"
* Fix: futex.h: include headers outside extern C
* Fix: add missing unused attribute to _rcu_dereference
* Fix: change method used by _rcu_dereference to strip type constness
* Fix: remove type constness in URCU_FORCE_CAST's C++ version
* Move extern "C" down in include/urcu/urcu-bp.h
* fix: ifdef linux specific cpu count compat
* Set git-review branch to stable-0.13
* fix: sysconf(_SC_NPROCESSORS_CONF) can be less than max cpu id
* Fix: revise obsolete command in README.md
* Fix: workqueue: remove unused variable "ret"
* Fix: urcu-qsbr: futex wait: handle spurious futex wakeups
* Fix: urcu: futex wait: handle spurious futex wakeups
* Fix: urcu-wait: futex wait: handle spurious futex wakeups
* Fix: defer_rcu: futex wait: handle spurious futex wakeups
* Fix: call_rcu: futex wait: handle spurious futex wakeups
* Fix: workqueue: futex wait: handle spurious futex wakeups
* Fix: Use %lu rather than %ld to print count
2022-01-05 Userspace RCU 0.13.1
* fix: properly detect 'cmpxchg' on x86-32
* fix: use urcu-tls compat with c++ compiler
* fix: remove autoconf features default value in help message
* fix: add missing pkgconfig file for memb flavour lib
* Make temporary variable in _rcu_dereference non-const
* Fix: x86 and s390: uatomic __hp() macro C++ support
* Fix: x86 and s390: uatomic __hp() macro clang support
* Fix: x86 and s390 uatomic: __hp() macro warning with gcc 11
* Fix: changelog: v0.13.0 was released in 2021
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sat, 26 Nov 2022 13:42:49 +0000 (14:42 +0100)]
libtiff: Update to version 4.4.0
- Update from version 4.3.0 to 4.4.0
- Update of rootfile
- Changelog is too long to include here (~1000 lines). Details can be found in ChangeLog
file in the source tarball. There are at least 31 bug closures in this release.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sat, 26 Nov 2022 13:42:38 +0000 (14:42 +0100)]
libtasn1: Update to version 4.19.0
- Update from version 4.18.0 to 4.19.0
- Update of rootfile
- Changelog
* Noteworthy changes in release 4.19.0 (2022-08-23) [stable]
- Clarify libtasn1.map license. Closes: #38.
- Fix ETYPE_OK out of bounds read. Closes: #32.
- Update gnulib files and various maintenance fixes.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sat, 26 Nov 2022 13:42:22 +0000 (14:42 +0100)]
iproute2: Update to version 6.0.0
- Update from 5.19.0 to 6.0.0
- Update of rootfile
- Changelog can only be obtained by reviewing the git commits from
https://git.kernel.org/pub/scm/network/iproute2/iproute2.git
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sat, 26 Nov 2022 13:41:59 +0000 (14:41 +0100)]
git: Update to version 2.38.1
- Update from version 2.37.1 to 2.38.1
- Update of rootfile
- Changelog
Git v2.38.1 Release Notes
This release merges the security fix that appears in v2.30.6; see
the release notes for that version for details.
Git v2.38 Release Notes
* "git remote show [-n] frotz" now pays attention to negative
pathspec.
* "git push" sometimes performs poorly when reachability bitmaps are
used, even in a repository where other operations are helped by
bitmaps. The push.useBitmaps configuration variable is introduced
to allow disabling use of reachability bitmaps only for "git push".
* "git grep -m<max-hits>" is a way to limit the hits shown per file.
* "git merge-tree" learned a new mode where it takes two commits and
computes a tree that would result in the merge commit, if the
histories leading to these two commits were to be merged.
* "git mv A B" in a sparsely populated working tree can be asked to
move a path between directories that are "in cone" (i.e. expected
to be materialized in the working tree) and "out of cone"
(i.e. expected to be hidden). The handling of such cases has been
improved.
* Earlier, HTTP transport clients learned to tell the server side
what locale they are in by sending Accept-Language HTTP header, but
this was done only for some requests but not others.
* Introduce a safe.barerepository configuration variable that
allows users to forbid discovery of bare repositories.
* Various messages that come from the pack-bitmap codepaths have been
tweaked.
* "git rebase -i" learns to update branches whose tip appear in the
rebased range with "--update-refs" option.
* "git ls-files" learns the "--format" option to tweak its output.
* "git cat-file" learned an option to use the mailmap when showing
commit and tag objects.
* When "git merge" finds that it cannot perform a merge, it should
restore the working tree to the state before the command was
initiated, but in some corner cases it didn't.
* Operating modes like "--batch" of "git cat-file" command learned to
take NUL-terminated input, instead of one-item-per-line.
* "git rm" has become more aware of the sparse-index feature.
* "git rev-list --disk-usage" learned to take an optional value
"human" to show the reported value in human-readable format, like
"3.40MiB".
* The "diagnose" feature to create a zip archive for diagnostic
material has been lifted from "scalar" and made into a feature of
"git bugreport".
* The namespaces used by "log --decorate" from "refs/" hierarchy by
default has been tightened.
* "git rev-list --ancestry-path=C A..B" is a natural extension of
"git rev-list A..B"; instead of choosing a subset of A..B to those
that have ancestry relationship with A, it lets a subset with
ancestry relationship with C.
* "scalar" now enables built-in fsmonitor on enlisted repositories,
when able.
* The bash prompt (in contrib/) learned to optionally indicate when
the index is unmerged.
* "git clone" command learned the "--bundle-uri" option to coordinate
with hosting sites the use of pre-prepared bundle files.
* "git range-diff" learned to honor pathspec argument if given.
* "git format-patch --from=<ident>" can be told to add an in-body
"From:" line even for commits that are authored by the given
<ident> with "--force-in-body-from" option.
* The built-in fsmonitor refuses to work on a network mounted
repositories; a configuration knob for users to override this has
been introduced.
* The "scalar" addition from Microsoft is now part of the core Git
installation.
* Collection of what is referenced by objects in promisor packs have
been optimized to inspect these objects in the in-pack order.
* Introduce a helper to see if a branch is already being worked on
(hence should not be newly checked out in a working tree), which
performs much better than the existing find_shared_symref() to
replace many uses of the latter.
* Teach "git archive" to (optionally and then by default) avoid
spawning an external "gzip" process when creating ".tar.gz" (and
".tgz") archives.
* Allow large objects read from a packstream to be streamed into a
loose object file straight, without having to keep it in-core as a
whole.
* Further preparation to turn git-submodule.sh into a builtin
continues.
* Apply Coccinelle rule to turn raw memmove() into MOVE_ARRAY() cpp
macro, which would improve maintainability and readability.
* Teach "make all" to build gitweb as well.
* Tweak tests so that they still work when the "git init" template
did not create .git/info directory.
* Add Coccinelle rules to detect the pattern of initializing and then
finalizing a structure without using it in between at all, which
happens after code restructuring and the compilers fail to
recognize as an unused variable.
* The code to convert between GPG trust level strings and internal
constants we use to represent them have been cleaned up.
* Support for libnettle as SHA256 implementation has been added.
* The way "git multi-pack" uses parse-options API has been improved.
* A Coccinelle rule (in contrib/) to encourage use of COPY_ARRAY
macro has been improved.
* API tweak to make it easier to run fuzz testing on commit-graph parser.
* Omit fsync-related trace2 entries when their values are all zero.
* The codepath to write multi-pack index has been taught to release a
large chunk of memory that holds an array of objects in the packs,
as soon as it is done with the array, to reduce memory consumption.
* Add a level of redirection to array allocation API in xdiff part,
to make it easier to share with the libgit2 project.
* "git fetch" client logs the partial clone filter used in the trace2
output.
* The "bundle URI" design gets documented.
* The common ancestor negotiation exchange during a "git fetch"
session now leaves trace log.
* Test portability improvements.
(merge 4d1d843be7 mt/rot13-in-c later to maint).
* The "subcommand" mode is introduced to parse-options API and update
the command line parser of Git commands with subcommands.
* The pack bitmap file gained a bitmap-lookup table to speed up
locating the necessary bitmap for a given commit.
* The assembly version of SHA-1 implementation for PPC has been
removed.
* The server side that responds to "git fetch" and "git clone"
request has been optimized by allowing it to send objects in its
object store without recomputing and validating the object names.
* Annotate function parameters that are not used (but cannot be
removed for structural reasons), to prepare us to later compile
with -Wunused warning turned on.
* Share the text used to explain configuration variables used by "git
<subcmd>" in "git help <subcmd>" with the text from "git help config".
* "git mv A B" in a sparsely populated working tree can be asked to
move a path from a directory that is "in cone" to another directory
that is "out of cone". Handling of such a case has been improved.
* The chainlint script for our tests has been revamped.
* Rewrite of "git add -i" in C that appeared in Git 2.25 didn't
correctly record a removed file to the index, which was fixed.
* Certain diff options are currently ignored when combined-diff is
shown; mark them as incompatible with the feature.
* Adjust technical/bitmap-format to be formatted by AsciiDoc, and
add some missing information to the documentation.
* Fixes for tests when the source directory has unusual characters in
its path, e.g. whitespaces, double-quotes, etc.
* "git mktree --missing" lazily fetched objects that are missing from
the local object store, which was totally unnecessary for the purpose
of creating the tree object(s) from its input.
* Give _() markings to fatal/warning/usage: labels that are shown in
front of these messages.
* References to commands-to-be-typed-literally in "git rebase"
documentation mark-up have been corrected.
* In a non-bare repository, the behavior of Git when the
core.worktree configuration variable points at a directory that has
a repository as its subdirectory, regressed in Git 2.27 days.
* Recent update to vimdiff layout code has been made more robust
against different end-user vim settings.
* Plug various memory leaks, both in the main code and in test-tool
commands.
* Fixes a long-standing corner case bug around directory renames in
the merge-ort strategy.
* The resolve-undo information in the index was not protected against
GC, which has been corrected.
* A corner case bug where lazily fetching objects from a promisor
remote resulted in infinite recursion has been corrected.
* "git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
* An earlier attempt to plug leaks placed a clean-up label to jump to
at a bogus place, which as been corrected.
* Variable quoting fix in the vimdiff driver of "git mergetool"
* "git shortlog -n" relied on the underlying qsort() to be stable,
which shouldn't have. Fixed.
* A fix for a regression in test framework.
* mkstemp() emulation on Windows has been improved.
* Add missing documentation for "include" and "includeIf" features in
"git config" file format, which incidentally teaches the command
line completion to include them in its offerings.
* Avoid "white/black-list" in documentation and code comments.
* Workaround for a compiler warning against use of die() in
osx-keychain (in contrib/).
* Workaround for a false positive compiler warning.
* "git p4" working on UTF-16 files on Windows did not implement
CRLF-to-LF conversion correctly, which has been corrected.
* "git p4" did not handle non-ASCII client name well, which has been
corrected.
* "rerere-train" script (in contrib/) used to honor commit.gpgSign
while recreating the throw-away merges.
* "git checkout" miscounted the paths it updated, which has been
corrected.
* Fix for a bug that makes write-tree to fail to write out a
non-existent index as a tree, introduced in 2.37.
* There was a bug in the codepath to upgrade generation information
in commit-graph from v1 to v2 format, which has been corrected.
* Gitweb had legacy URL shortener that is specific to the way
projects hosted on kernel.org used to (but no longer) work, which
has been removed.
* Fix build procedure for Windows that uses CMake so that it can pick
up the shell interpreter from local installation location.
* Conditionally allow building Python interpreter on Windows
* Fix to lstat() emulation on Windows.
* Older gcc with -Wall complains about the universal zero initializer
"struct s = { 0 };" idiom, which makes developers' lives
inconvenient (as -Werror is enabled by DEVELOPER=YesPlease). The
build procedure has been tweaked to help these compilers.
* Plug memory leaks in the failure code path in the "merge-ort" merge
strategy backend.
* "git symbolic-ref symref non..sen..se" is now diagnosed as an error.
* A follow-up fix to a fix for a regression in 2.36 around hooks.
* Avoid repeatedly running getconf to ask libc version in the test
suite, and instead just as it once per script.
* Platform-specific code that determines if a directory is OK to use
as a repository has been taught to report more details, especially
on Windows.
* "vimdiff3" regression fix.
* "git fsck" reads mode from tree objects but canonicalizes the mode
before passing it to the logic to check object sanity, which has
hid broken tree objects from the checking logic. This has been
corrected, but to help existing projects with broken tree objects
that they cannot fix retroactively, the severity of anomalies this
code detects has been demoted to "info" for now.
* Fixes to sparse index compatibility work for "reset" and "checkout"
commands.
* An earlier optimization discarded a tree-object buffer that is
still in use, which has been corrected.
* Fix deadlocks between main Git process and subprocess spawned via
the pipe_command() API, that can kill "git add -p" that was
reimplemented in C recently.
* The sequencer machinery translated messages left in the reflog by
mistake, which has been corrected.
* xcalloc(), imitating calloc(), takes "number of elements of the
array", and "size of a single element", in this order. A call that
does not follow this ordering has been corrected.
* The preload-index codepath made copies of pathspec to give to
multiple threads, which were left leaked.
* Update the version of Ubuntu used for GitHub Actions CI from 18.04
to 22.04.
* The auto-stashed local changes created by "git merge --autostash"
was mixed into a conflicted state left in the working tree, which
has been corrected.
* Multi-pack index got corrupted when preferred pack changed from one
pack to another in a certain way, which has been corrected.
(merge 99e4d084ff tb/midx-with-changing-preferred-pack-fix later to maint).
* The clean-up of temporary files created via mks_tempfile_dt() was
racy and attempted to unlink() the leading directory when signals
are involved, which has been corrected.
(merge babe2e0559 rs/tempfile-cleanup-race-fix later to maint).
* FreeBSD portability fix for "git maintenance" that spawns "crontab"
to schedule tasks.
(merge ee69e7884e bc/gc-crontab-fix later to maint).
* Those who use diff-so-fancy as the diff-filter noticed a regression
or two in the code that parses the diff output in the built-in
version of "add -p", which has been corrected.
(merge 0a101676e5 js/add-p-diff-parsing-fix later to maint).
* Segfault fix-up to an earlier fix to the topic to teach "git reset"
and "git checkout" work better in a sparse checkout.
(merge 037f8ea6d9 vd/sparse-reset-checkout-fixes later to maint).
* "git diff --no-index A B" managed its the pathnames of its two
input files rather haphazardly, sometimes leaking them. The
command line argument processing has been straightened out to clean
it up.
(merge 2b43dd0eb5 rs/diff-no-index-cleanup later to maint).
* "git rev-list --verify-objects" ought to inspect the contents of
objects and notice corrupted ones, but it didn't when the commit
graph is in use, which has been corrected.
(merge b27ccae34b jk/rev-list-verify-objects-fix later to maint).
* More fixes to "add -p"
(merge 64ec8efb83 js/builtin-add-p-portability-fix later to maint).
* The parser in the script interface to parse-options in "git
rev-parse" has been updated to diagnose a bogus input correctly.
(merge f20b9c36d0 ow/rev-parse-parseopt-fix later to maint).
* The code that manages list-object-filter structure, used in partial
clones, leaked the instances, which has been plugged.
(merge 66eede4a37 jk/plug-list-object-filter-leaks later to maint).
* Fix another UI regression in the reimplemented "add -p".
(merge f6f0ee247f rs/add-p-worktree-mode-prompt-fix later to maint).
* "git fetch" over protocol v2 sent an incorrect ref prefix request
to the server and made "git pull" with configured fetch refspec
that does not cover the remote branch to merge with fail, which has
been corrected.
(merge 49ca2fba39 jk/proto-v2-ref-prefix-fix later to maint).
* A result from opendir() was leaking in the commit-graph expiration
codepath, which has been plugged.
(merge 12f1ae5324 ml/commit-graph-expire-dir-leak-fix later to maint).
* Just like we have coding guidelines, we now have guidelines for
reviewers.
(merge e01b851923 vd/doc-reviewing-guidelines later to maint).
* Other code cleanup, docfix, build fix, etc.
(merge 77b9e85c0f vd/fix-perf-tests later to maint).
(merge 0682bc43f5 jk/test-crontab-fixes later to maint).
(merge b46dd1726c cc/doc-trailer-whitespace-rules later to maint).
Git 2.37.4 Release Notes
This primarily is to backport various fixes accumulated on the 'master'
front since 2.37.3, and also includes the same security fixes as in v2.30.6.
* CVE-2022-39253:
When relying on the `--local` clone optimization, Git dereferences
symbolic links in the source repository before creating hardlinks
(or copies) of the dereferenced link in the destination repository.
This can lead to surprising behavior where arbitrary files are
present in a repository's `$GIT_DIR` when cloning from a malicious
repository.
Git will no longer dereference symbolic links via the `--local`
clone mechanism, and will instead refuse to clone repositories that
have symbolic links present in the `$GIT_DIR/objects` directory.
Additionally, the value of `protocol.file.allow` is changed to be
"user" by default.
Credit for finding CVE-2022-39253 goes to Cory Snider of Mirantis.
The fix was authored by Taylor Blau, with help from Johannes
Schindelin.
* CVE-2022-39260:
An overly-long command string given to `git shell` can result in
overflow in `split_cmdline()`, leading to arbitrary heap writes and
remote code execution when `git shell` is exposed and the directory
`$HOME/git-shell-commands` exists.
`git shell` is taught to refuse interactive commands that are
longer than 4MiB in size. `split_cmdline()` is hardened to reject
inputs larger than 2GiB.
Credit for finding CVE-2022-39260 goes to Kevin Backhouse of
GitHub. The fix was authored by Kevin Backhouse, Jeff King, and
Taylor Blau.
* An earlier optimization discarded a tree-object buffer that is
still in use, which has been corrected.
* Fix deadlocks between main Git process and subprocess spawned via
the pipe_command() API, that can kill "git add -p" that was
reimplemented in C recently.
* xcalloc(), imitating calloc(), takes "number of elements of the
array", and "size of a single element", in this order. A call that
does not follow this ordering has been corrected.
* The preload-index codepath made copies of pathspec to give to
multiple threads, which were left leaked.
* Update the version of Ubuntu used for GitHub Actions CI from 18.04
to 22.04.
* The auto-stashed local changes created by "git merge --autostash"
was mixed into a conflicted state left in the working tree, which
has been corrected.
Also contains other minor documentation updates and code clean-ups.
Git 2.37.3 Release Notes
This primarily is to backport various fixes accumulated on the 'master'
front since 2.37.2.
* The build procedure for Windows that uses CMake has been updated to
pick up the shell interpreter from local installation location.
* Conditionally allow building Python interpreter on Windows
* Fix to lstat() emulation on Windows.
* Older gcc with -Wall complains about the universal zero initializer
"struct s = { 0 };" idiom, which makes developers' lives
inconvenient (as -Werror is enabled by DEVELOPER=YesPlease). The
build procedure has been tweaked to help these compilers.
* Plug memory leaks in the failure code path in the "merge-ort" merge
strategy backend.
* Avoid repeatedly running getconf to ask libc version in the test
suite, and instead just as it once per script.
* Platform-specific code that determines if a directory is OK to use
as a repository has been taught to report more details, especially
on Windows.
* "vimdiff3" regression has been corrected.
* "git fsck" reads mode from tree objects but canonicalizes the mode
before passing it to the logic to check object sanity, which has
hid broken tree objects from the checking logic. This has been
corrected, but to help exiting projects with broken tree objects
that they cannot fix retroactively, the severity of anomalies this
code detects has been demoted to "info" for now.
* Fixes to sparse index compatibility work for "reset" and "checkout"
commands.
* Documentation for "git add --renormalize" has been improved.
Also contains other minor documentation updates and code clean-ups.
Git 2.37.2 Release Notes
This primarily is to backport various fixes accumulated on the 'master'
front since 2.37.1.
* "git shortlog -n" relied on the underlying qsort() to be stable,
which shouldn't have. Fixed.
* Variable quoting fix in the vimdiff driver of "git mergetool".
* An earlier attempt to plug leaks placed a clean-up label to jump to
at a bogus place, which as been corrected.
* Fixes a long-standing corner case bug around directory renames in
the merge-ort strategy.
* Recent update to vimdiff layout code has been made more robust
against different end-user vim settings.
* In a non-bare repository, the behavior of Git when the
core.worktree configuration variable points at a directory that has
a repository as its subdirectory, regressed in Git 2.27 days.
* References to commands-to-be-typed-literally in "git rebase"
documentation mark-up have been corrected.
* Give _() markings to fatal/warning/usage: labels that are shown in
front of these messages.
* "git mktree --missing" lazily fetched objects that are missing from
the local object store, which was totally unnecessary for the purpose
of creating the tree object(s) from its input.
* Fixes for tests when the source directory has unusual characters in
its path, e.g. whitespaces, double-quotes, etc.
* Adjust technical/bitmap-format to be formatted by AsciiDoc, and
add some missing information to the documentation.
* Certain diff options are currently ignored when combined-diff is
shown; mark them as incompatible with the feature.
* "git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
* mkstemp() emulation on Windows has been improved.
* Add missing documentation for "include" and "includeIf" features in
"git config" file format, which incidentally teaches the command
line completion to include them in its offerings.
* Avoid "white/black-list" in documentation and code comments.
* Workaround for a compiler warning against use of die() in
osx-keychain (in contrib/).
* Workaround for a false positive compiler warning.
* The resolve-undo information in the index was not protected against
GC, which has been corrected.
* A corner case bug where lazily fetching objects from a promisor
remote resulted in infinite recursion has been corrected.
* "git p4" working on UTF-16 files on Windows did not implement
CRLF-to-LF conversion correctly, which has been corrected.
* "git p4" did not handle non-ASCII client name well, which has been
corrected.
* "rerere-train" script (in contrib/) used to honor commit.gpgSign
while recreating the throw-away merges.
* "git checkout" miscounted the paths it updated, which has been
corrected.
* Fix for a bug that makes write-tree to fail to write out a
non-existent index as a tree, introduced in 2.37.
* There was a bug in the codepath to upgrade generation information
in commit-graph from v1 to v2 format, which has been corrected.
Also contains minor documentation updates and code clean-ups.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sat, 26 Nov 2022 13:41:25 +0000 (14:41 +0100)]
fmt: Update to version 9.1.0
- Update from version 9.0.0 to 9.1.0
- Update of rootfile
- Changelog
9.1.0 - 2022-08-27
* ``fmt::formatted_size`` now works at compile time
`#3026 <https://github.com/fmtlib/fmt/pull/3026>`_
For example (`godbolt <https://godbolt.org/z/1MW5rMdf8>`__):
.. code:: c++
#include <fmt/compile.h>
int main() {
using namespace fmt::literals;
constexpr size_t n = fmt::formatted_size("{}"_cf, 42);
fmt::print("{}\n", n); // prints 2
}
* Fixed handling of invalid UTF-8
`#3038 <https://github.com/fmtlib/fmt/pull/3038>`_,
`#3044 <https://github.com/fmtlib/fmt/pull/3044>`_,
`#3056 <https://github.com/fmtlib/fmt/pull/3056>`_
* Improved Unicode support in ``ostream`` overloads of ``print``
`#2994 <https://github.com/fmtlib/fmt/pull/2994>`_,
`#3001 <https://github.com/fmtlib/fmt/pull/3001>`_,
`#3025 <https://github.com/fmtlib/fmt/pull/3025>`_
* Fixed handling of the sign specifier in localized formatting on systems with
32-bit ``wchar_t``
`#3041 <https://github.com/fmtlib/fmt/issues/3041>`_).
* Added support for wide streams to ``fmt::streamed``
`#2994 <https://github.com/fmtlib/fmt/pull/2994>`_
* Added the ``n`` specifier that disables the output of delimiters when
formatting ranges
`#2981 <https://github.com/fmtlib/fmt/pull/2981>`_,
`#2983 <https://github.com/fmtlib/fmt/pull/2983>`_
For example (`godbolt <https://godbolt.org/z/roKqGdj8c>`__):
.. code:: c++
#include <fmt/ranges.h>
#include <vector>
int main() {
auto v = std::vector{1, 2, 3};
fmt::print("{:n}\n", v); // prints 1, 2, 3
}
* Worked around problematic ``std::string_view`` constructors introduced in C++23
`#3030 <https://github.com/fmtlib/fmt/issues/3030>`_,
`#3050 <https://github.com/fmtlib/fmt/issues/3050>`_
* Improve handling (exclusion) of recursive ranges
`#2968 <https://github.com/fmtlib/fmt/issues/2968>`_,
`#2974 <https://github.com/fmtlib/fmt/pull/2974>`_
* Improved error reporting in format string compilation
`#3055 <https://github.com/fmtlib/fmt/issues/3055>`_
* Improved the implementation of
`Dragonbox <https://github.com/jk-jeon/dragonbox>`_, the algorithm used for
the default floating-point formatting
`#2984 <https://github.com/fmtlib/fmt/pull/2984>`_
* Fixed issues with floating-point formatting on exotic platforms.
* Improved the implementation of chrono formatting
`#3010 <https://github.com/fmtlib/fmt/pull/3010>`_
* Improved documentation
`#2966 <https://github.com/fmtlib/fmt/pull/2966>`_,
`#3009 <https://github.com/fmtlib/fmt/pull/3009>`_,
`#3020 <https://github.com/fmtlib/fmt/issues/3020>`_,
`#3037 <https://github.com/fmtlib/fmt/pull/3037>`_
* Improved build configuration
`#2991 <https://github.com/fmtlib/fmt/pull/2991>`_,
`#2995 <https://github.com/fmtlib/fmt/pull/2995>`_,
`#3004 <https://github.com/fmtlib/fmt/issues/3004>`_,
`#3007 <https://github.com/fmtlib/fmt/pull/3007>`_,
`#3040 <https://github.com/fmtlib/fmt/pull/3040>`_
* Fixed various warnings and compilation issues
`#2969 <https://github.com/fmtlib/fmt/issues/2969>`_,
`#2971 <https://github.com/fmtlib/fmt/pull/2971>`_,
`#2975 <https://github.com/fmtlib/fmt/issues/2975>`_,
`#2982 <https://github.com/fmtlib/fmt/pull/2982>`_,
`#2985 <https://github.com/fmtlib/fmt/pull/2985>`_,
`#2988 <https://github.com/fmtlib/fmt/issues/2988>`_,
`#3000 <https://github.com/fmtlib/fmt/issues/3000>`_,
`#3006 <https://github.com/fmtlib/fmt/issues/3006>`_,
`#3014 <https://github.com/fmtlib/fmt/issues/3014>`_,
`#3015 <https://github.com/fmtlib/fmt/issues/3015>`_,
`#3021 <https://github.com/fmtlib/fmt/pull/3021>`_,
`#3023 <https://github.com/fmtlib/fmt/issues/3023>`_,
`#3024 <https://github.com/fmtlib/fmt/pull/3024>`_,
`#3029 <https://github.com/fmtlib/fmt/pull/3029>`_,
`#3043 <https://github.com/fmtlib/fmt/pull/3043>`_,
`#3052 <https://github.com/fmtlib/fmt/issues/3052>`_,
`#3053 <https://github.com/fmtlib/fmt/pull/3053>`_,
`#3054 <https://github.com/fmtlib/fmt/pull/3054>`_
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Fri, 25 Nov 2022 17:37:53 +0000 (18:37 +0100)]
fetchmail: Update to version 6.4.34
- Update from version 6.4.32 to 6.4.34
- Update of rootfile not required.
- Changelog
Fetchmail Release Notes
# ADVANCE WARNING OF FEATURES TO BE REMOVED OR CHANGED IN FUTURE VERSIONS
(There are no plans to remove features from a 6.4.X release, but they may be
removed from a 6.5.0 or newer release.)
* Future fetchmail releases may require compilers and operating systems
that adhere to standards issued 2011 or later.
(Currently, C89 and Single Unix Specification V2 should suffice.)
* Future fetchmail releases may tighten up security and lean towards
it a bit more by, for instance, implementing recommendations from
RFC-7817 or RFC-8314. This may, for instance, require that TLS v1.1
or newer be used.
* The MX and host alias DNS lookups that fetchmail performs in multidrop mode
are based on assumptions that are rarely met in practice, somewhat defective,
deprecated and may be removed from a future fetchmail version.
They have never supported IPv6 (including IPv6-mapped IPv4).
Non-DNS based alias keywords such as "aka" will remain in fetchmail.
* The monitor and interface options may be removed from a future fetchmail
version as they are not reasonably portable across operating systems.
* POP2 is obsolete, support will be removed from a future fetchmail version.
* IMAP2 and IMAP4 (not IMAP4r1) are obsolete, support may be removed from a
future fetchmail version.
* RPOP is obsolete, support will be removed from a future fetchmail release.
* The multidrop To/Cc guessing code along with the fragile duplicate suppressor
is deprecated and may be removed from a future release.
* The "envelope Received" option may be removed from a future release, because
the Received header was never meant to be machine-readable, the format varies
widely, and various other differences in behavior make parsing Received an
unreliable undertaking. The envelope option as such will remain though, in
order to support Delivered-To, X-Envelope-To, X-Original-To and similar.
See also <http://home.pages.de/~mandree/mail/multidrop>.
* The --enable-fallback (fall back to MDA if MTA unavailable) will be removed
from a future fetchmail release, because it makes fetchmail's behavior
inconsistent and confusing.
* The "protocol auto" default inside fetchmail may be removed from a future
fetchmail release. Explicit configuration of the protocol is recommended.
* Kerberos IV support may be removed from a future fetchmail release.
* Kerberos 5 support may be removed from a future fetchmail release.
* The --principal option may be removed from a future fetchmail release.
* SIGHUP wakeup support may be removed from a future fetchmail release and
cause fetchmail to terminate - it was broken for many years.
* Support for operating systems that are not sufficiently POSIX compliant may be
removed or operation on such systems may be suboptimal for future releases.
This means that fetchmail may only continue to work on C99 and POSIX 2001
based systems.
* The maintainer may migrate fetchmail to C++ with STL or C#, and impose further
requirements (dependencies), such as Boost or other class libraries.
* The softbounce option default will change to "false" in the next release.
* The --bsmtp - mode of operation may be removed in a future release.
* SSLv3 support may be removed from a future fetchmail release. It has been
obsolete for many years and found insecure. Use TLS.
* Fetchmailconf is deprecated and will be removed from a future release.
* Fetchmail does not guarantee compatibility with EOL OpenSSL versions. Support
for end-of-life OpenSSL versions may be removed even from patchlevel releases.
* Nonstandard authentication schemes (such as RPA) may be removed from future
fetchmail versions.
* Nonstandard protocol extensions (such as SDPS/*ENV) may be removed from future
fetchmail versions.
* Future fetchmail releases (even minor ones) may change undocumented parts of
the .netrc parser in incompatible ways to enhance compatibility with typical
ftp(1) .netrc parsers.
* Apparently OPIE is dying. I only have this support on FreeBSD, and
FreeBSD 14 (slated for release in 2023) is about to remove it.
# KNOWN BUGS AND WORKAROUNDS
* Fetchmail does not handle messages without Message-ID header well
(See sourceforge.net bug #780933)
* Fetchmail currently uses 31-bit signed integers in several places
where unsigned and/or wider types should have been used, for instance,
for mailbox sizes, and misreports sizes of 2 GibiB and beyond.
Fixing this requires C89 compatibility to be relinquished.
* BSMTP is mostly untested and errors can cause corrupt output.
* Fetchmail does not track pending deletes across crashes.
* The command line interface is sometimes a bit stubborn, for instance,
fetchmail -s doesn't work with a daemon running.
* Linux systems may return duplicates of an IP address in some circumstances if
no or no global IPv6 addresses are configured.
(No workaround. Ubuntu Bug#582585, Novell Bug#606980.)
* Kerberos 5 may be broken, particularly on Heimdal, and provide bogus error
messages. This will not be fixed, because the maintainer has no Kerberos 5
server to test against. Use GSSAPI.
* For IMAP connections, fetchmail will print "will idle after poll" in
verbose mode even though --idle is not given, as an artifact of the 6.4.22
security fixes. Fetchmail means "could idle after poll", but this would
have required another loop through the translators.
* aka ... hostnames are not considered for upstream server X.509 certificate
verification, aka was meant for alias detection with multidrop mailboxes.
* When compiled against wolfSSL, some diagnostics and messages of fetchmail are
hardcoded to read "OpenSSL"; this was found only after the call for
translations had been sent out already.
* FreeBSD's OPIE implementation cannot be found when using a C++ compiler.
This should not affect the normal build, which uses a C compiler.
fetchmail-6.4.34 (released 2022-10-15, 31701 LoC):
# CRITICAL BUG FIXES:
* When an SMTP receiver refuses delivery, a message would be deleted from
the mail store in spite of a softbounce option that is enabled.
Bug report, analysis and patch by Horváth Zsolt. Gitlab, fixes #50.
# BUILD NOTE:
* If you are reusing config.cache from prior builds, this may cause
issues with finding Python or some libraries. In case of trouble,
remove config.cache and retry.
# TRANSLATIONS: language translations were updated by this fine person:
* sr: Мирослав Николић (Miroslav Nikolić) [Serbian]
fetchmail-6.4.33 (released 2022-08-27, 31696 LoC):
# TRANSLATIONS: language translations were updated by this fine person:
* fr: Frédéric Marchal [French]
# CONTRIBUTED SCRIPT CHANGES:
* contrib/fetchsetup improvements by Matěj Cepl
* contrib/runfetchmail improvements by Matěj Cepl
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Fri, 25 Nov 2022 17:37:30 +0000 (18:37 +0100)]
elinks: Update to version 0.15.1
- Update from version 0.12pre6 (2012) to 0.15.1 (July 2022)
- Update of rootfile
- Original elinks was last updated in 2012. In Jan 2020 a fork was made of the package
and has been maintained since then on an ongoing basis. This new fork is used by Arch
Linux
- elinks has not been an addon since CU141 but the lfs file was still in the addon format
This has been adjusted to make it in line with a core program
- The previous patches related to ssl have been removed as the fixes are now part of the
source tarball.
- Changelog
ELinks 0.15.1 Released on 2022-07-31
* about:config
* option --always-load-config #137
* compilation fixes on Windows #140
* added ui.background_char #142
* sample build scripts and docker files
* experimental DGI support
* DOS port based on links code
* configurable Accept-Header #143
* minor compilation fixes
ELinks 0.15.0 Released on 2021-12-24
* Serbian translation update
ELinks 0.15.0rc2 Released on 2021-12-19
* Serbian translation update
* HOME_ETC
ELinks 0.15.0rc1 Released on 2021-12-04
* removed -Wno-pointer-sign from CFLAGS
* close stdin before calling a background program (sgerwk)
and options related to it #108, #109, #110, #113
* gemini protocol and text/gemini mime type
* changed rendering of blockquote element
* avoid tmpfile in lua (sgerwk) #115, #118
* console.log in js (mtatton) #93
* localstorage (mtatton) #98
* options document.browse.search.beginning_only
document.browse.search.ignore_history
ui.double_esc
* ui.temperature.* to show temperature of CPU
* document.plain.fixup_tables
* enhanced ecmascript code. Added QuickJS
* Notes on ECMAScript:
requires C++ compiler, sqlite3, libxml++5 >= 5.0.1.GIT
and either mozjs78-dev or QuickJS-2021-03-27
Most sites don't work, some crash. Some workarounds were implemented:
a) ECMAScript is disabled by default
b) ~/.elinks/allow.txt and ~/.elinks/disallow.txt with url prefixes
c) Added toggle-ecmascript action. You can bind it to some key
* other small fixes
ELinks 0.14.3 Released on 2021-09-26
* Fix issue with negative value of cells #126
ELinks 0.14.2 Released on 2021-08-29
* crash in nttp #114
* XSS in gopher #125
ELinks 0.14.1 Released on 2021-05-30
* Disable spidermonkey by default #85
* Show error message about libgcrypt-config. #86
* off by two. #88
* Check NULL. #99
* fix error message when no previous search was performed #100
* alert when moving to the next match of a failed search #101
* include unistd.h and errno.h to define safe_read() #107
ELinks 0.14.0 Released on 2020-12-27
No changes since 0.14.0rc2.
ELinks 0.14.0rc2 Released on 2020-12-13
* ~/.elinks/allow.txt - list of allowed url prefixes for js
ELinks 0.14.0rc1 Released on 2020-12-06
* dblatex for pdf. PR #64
* fixes CTRL-Z. #65
* changes in mime handlers. PR #66
* fixes in data protocol. #67, #68, #71, #72, #73
* allow to wrap text in PRE. #69
* pass #fragment to external command. #75
* introduced "document.browse.search.reset". #76
* added meson as alternative build system
* in #77 I'm going to attach static binaries for released versions
* mozjs dependency updated to 52.*
Note that, to compile with javascript support you must compile by g++ with -fpermissive option.
There is a lot of warnings. Unfortunately JS often crashes. Without help from someone familiar
with SpiderMonkey, we won't go far.
As you might notice, I renamed repo to elinks.
Thanks to all involved in this release.
ELinks 0.13.5 Released on 2020-08-30
* added clipboard selection using keyboard. #59
* fixed drawing menus over emoji characters. #60
* encoding to utf-8 and decoding back in python's pre_format_html_hook
This is likely the last release of 0.13.x series.
ELinks 0.13.4: Released on 2020-07-31.
* fixed segfault with gnutls. introduced in 0.13.3
* updated smart and dumb prefixes to https. Thanks Guido Cella. PR #54
* added the st terminal to config options. PR #55
* doc updates PR #57
* also pass the uri as %u to external handler. Thanks sgerwk. PR #58
* added the ui.clipboard_file config option
ELinks 0.13.3: Released on 2020-06-29.
* configure option --with-luapkg=name
You can choose lua version at compilation time. For example: --with-luapkg=luajit
* config option connection.ssl.https_by_default (Thanks Guido Cella)
not enabled by default
* docs updates (Guido Cella)
* fixes related to ui.mouse_disable and xterm-like terminals (Thanks sgerwk)
* show an alert when the search string is not found (sgerwk)
ELinks 0.13.2: Released on 2020-05-31.
* command line option -remote search(...) (thanks sgerwk)
* command line option -bind-address
* config option ui.mouse_disable (sgerwk)
* config option ui.tostop
* config option ui.sessions.fork_on_start
* compatibility (compilability) with lua-5.2 and 5.3
* modified cookies code (not well tested)
ELinks 0.13.1: Released on 2020-01-31.
* Fixed issue with uploading files to local cgi.
* Python scripts in contrib converted to python3.
ELinks 0.13.0: Released on 2019-12-27.
Incompatibilities:
* The protocol.fsp.sort option has been removed. ELinks always sorts.
* bug 1024: Verify the host name or IP address in the server certificate
if connection.ssl.cert_verify is not 0.
Miscellaneous:
* The configure script is no longer part of tarball, you must generate it.
For example running ./autogen.sh
* major bug 181: Slave ELinks processes can now run an external editor.
This used to work in the master process only.
* major bug 722: Filter CSS according to media types. New option
document.css.media.
* bug 638: Propagate the existence of $DISPLAY from slave terminals to
mailcap test commands.
* bugs 762, 1082: Small memory leak in goto_current_link/goto_imgmap
* bug 963: New option document.css.ignore_display_none.
* bug 977: Fixed crash when opening in new tab a non link with onclick
attribute.
* bug 1008: File upload fields in HTML forms now stream the files to
the server, instead of reading them to memory in advance. This lets
you upload larger files. The downsides are that ELinks may use a
cached response even if you have modified a file between requests,
and that ELinks can send inconsistent data if you modify a file
while it is being uploaded.
* bug 1054: Don't abort downloads when closing the terminal from which
they were started. When such a download ends, display the message
in the most recently used terminal. If the user chooses
``Background and Notify'' via the download manager in some terminal,
reassociate the download with that terminal. These changes do not
apply to downloads to external handlers.
* Really retry forever when connection.retries = 0.
* enhancement: Session-specific options. Any options changed with
toggle-* actions no longer affect other tabs or other terminals.
* Do not crash when document.browse.minimum_refresh_time = 0 and
a document has a meta refresh with a delay of 0.
* Properly update link highlighting and status bar information when the
repeat prefix is changed.
* Handle SSL rehandshakes
* Fix compatibility with Ruby >= 1.9
* enhancement 15: Domain-specific options. Use set_domain in
elinks.conf to e.g. disable cookies for google.com. The option
manager window does not yet support this.
* enhancement 867: Use bracketed paste mode on xterm. This requires
xterm patch #228 or later configured with --enable-readline-mouse.
* enhancement 824: Experimental support for combining characters.
See features.conf for details.
* enhancement: Add a new entry Link Info under Link main menu.
* enhancement: Indicate backgrounded downloads using an unused led.
* enhancement: Display the number of ECMAScript interpreters that have
been allocated for documents in the Resources dialog.
* Fedora enhancement 346861: Add support for nss_compat_ossl library
(OpenSSL replacement).
* enhancement: ``elinks --dump'' uses box-drawing characters if supported
by the charset.
* enhancement 1070: Support 256 colors on fbterm-1.4.
* enhancement 1075: Scrolling the entire contents of dialog boxes.
Especially useful for multi-file BitTorrent downloads.
* Report if the Lua function edit_bookmark_dialog receives the wrong
number or types of arguments instead of silently failing.
* enhancement: Add ``Invalidate'' button to the cache manager.
* enhancement: Add ``Search contents'' button to the cache manager with
which one can search through the cache items' data rather than their
metadata.
* enhancement: Add rudimentary support for the HTML5 media elements,
<video> and <audio>.
* enhancement: Add move-half-page-up and move-half-page-down actions.
* enhancement: Add option to change overlap for vertical scrolling.
* enhancement: HTML meta refresh allows semicolons in URLs, and the
syntax is more like in Firefox.
* link against lua51 not lua50
* SpiderMonkey must be mozjs-17.0. This version is latest with C API.
Find it with pkg-config.
* using iconv for some multibyte charsets. It works if the terminal codepage
is UTF-8. More charsets will be added on demand.
* enhancement: support SSL client certificate
* python scripting is Python3 only
* brotli and zstd encodings
* possibility to make use of libevent instead of select for event loop
* terminfo queries for output (not input) as compilation option
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Fri, 25 Nov 2022 17:37:17 +0000 (18:37 +0100)]
ddrescue: Update to version 1.26
- Update from version 1.25 to 1.26
- Update of rootfile not required
- Changelog
Changes in version 1.26:
While writing the mapfile, ddrescue now checks the return value of each call
to 'fprintf' to catch any temporary failure of 'fprintf' not reported by the
system when closing the file. (Hole in mapfile reported by Radomír Tomis).
Domain mapfiles may now contain unordered and overlapping blocks when
'-L, --loose-domain' is specified as long as no block overlaps with other
block of different status. (Suggested by Gábor Katona and Shaya Potter).
Ddrescue now shows the file name in all the diagnostics with a file involved.
(Reported by Radomír Tomis).
Ddrescue now exits with status 1 on fatal read errors.
(Suggested by Marco Marques).
Empty phases are now completely skipped.
Ddrescue now scrolls forward after each pass. This keeps on the screen the
final status of the previous pass, making it easier to estimate the amount
of work done by the current pass. (Based on a suggestion by David Morrison).
In case of error in a numerical argument to a command line option, ddrescue
now shows the name of the option and the range of valid values.
The option synonyms '--*-logfile' and '--pause' have been removed and are no
longer recognized.
Ddrescuelog now can convert between mapfiles and bitmaps of blocks (big and
little endian). The new option '-F, --format' has been added to ddrescuelog.
It selects the input format for '--create-mapfile', or the output format for
'--list-blocks'. (Bitmap format proposed by Florian Sedivy).
Option '-d, --delete-if-done' of ddrescuelog no longer returns an error if
the mapfile is read from standard input. Instead it behaves like
'-D, --done-status' because there is nothing to delete.
'ddrescuelog --show-status' now rounds percentages up to get the sum closer
to 100%.
Three missing '#include <algorithm>' have been added.
(Reported by Richard Burkert).
The description of the algorithm in the manual has been improved.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Fri, 25 Nov 2022 17:37:00 +0000 (18:37 +0100)]
cups-filters: Update to version 1.28.16
- Update from version 1.28.14 to 1.;28 16
- Update of rootfile not required
- Changelog
CHANGES IN V1.28.16
- imagetoraster, imagetopdf, libcupsfilters: Added support for
reading the resolution of an image from its EXIF data when
loading it. This way we get the image reproduced in its
original size with "print-scaling=none" (Issue #362).
- libcupsfilters: Replaced deprecated data types uint16 and
uint32. The function to read TIFF image files via libtiff in
cupsfilters/image-tiff.c uses the deprecated types uint16
and uint32. The replacements for these types are uint16_t
and uint32_t.
CHANGES IN V1.28.15
- pdftops: In pdftops identify old LaserJets more precisely
for working around PostScript interpreter bugs, older
printers need Poppler, newer models need Ghostscript
(Ubuntu bug #1967816).
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Fri, 25 Nov 2022 08:55:31 +0000 (09:55 +0100)]
sudo: Update to version 1.9.12p1
- Update from version 1.9.11p3 to 1.9.12p1
- Update of rootfile
- Changelog
What's new in Sudo 1.9.12p1
* Sudo's configure script now does a better job of detecting when
the -fstack-clash-protection compiler option does not work.
GitHub issue #191.
* Fixed CVE-2022-43995, a potential out-of-bounds write for passwords
smaller than 8 characters when passwd authentication is enabled.
This does not affect configurations that use other authentication
methods such as PAM, AIX authentication or BSD authentication.
* Fixed a build error with some configurations compiling host_port.c.
What's new in Sudo 1.9.12
* Fixed a bug in the ptrace-based intercept mode where the current
working directory could include garbage at the end.
* Fixed a compilation error on systems that lack the stdint.h
header. Bug #1035
* Fixed a bug when logging the command's exit status in intercept
mode. The wrong command could be logged with the exit status.
* For ptrace-based intercept mode, sudo will now attempt to
verify that the command path name, arguments and environment
have not changed from the time when they were authorized by the
security policy. The new "intercept_verify" sudoers setting can
be used to control this behavior.
* Fixed running commands with a relative path (e.g. ./foo) in
intercept mode. Previously, this would fail if sudo's current
working directory was different from that of the command.
* Sudo now supports passing the execve(2) system call the NULL
pointer for the `argv` and/or `envp` arguments when in intercept
mode. Linux treats a NULL pointer like an empty array.
* The sudoers LDAP schema now allows sudoUser, sudoRunasUser and
sudoRunasGroup to include UTF-8 characters, not just 7-bit ASCII.
* Fixed a problem with "sudo -i" on SELinux when the target user's
home directory is not searchable by sudo. GitHub issue #160.
* Neovim has been added to the list of visudo editors that support
passing the line number on the command line.
* Fixed a bug in sudo's SHA384 and SHA512 message digest padding.
* Added a new "-N" (--no-update) command line option to sudo which
can be used to prevent sudo from updating the user's cached
credentials. It is now possible to determine whether or not a
user's cached credentials are currently valid by running:
$ sudo -Nnv
and checking the exit value. One use case for this is to indicate
in a shell prompt that sudo is "active" for the user.
* PAM approval modules are no longer invoked when running sub-commands
in intercept mode unless the "intercept_authenticate" option is set.
There is a substantial performance penalty for calling into PAM
for each command run. PAM approval modules are still called for
the initial command.
* Intercept mode on Linux now uses process_vm_readv(2) and
process_vm_writev(2) if available.
* The XDG_CURRENT_DESKTOP environment variable is now preserved
by default. This makes it possible for graphical applications
to choose the correct theme when run via sudo.
* On 64-bit systems, if sudo fails to load a sudoers group plugin,
it will use system-specific heuristics to try to locate a 64-bit
version of the plugin.
* The cvtsudoers manual now documents the JSON and CSV output
formats. GitHub issue #172.
* Fixed a bug where sub-commands were not being logged to a remote
log server when log_subcmds was enabled. GitHub issue #174.
* The new log_stdin, log_stdout, log_stderr, log_ttyin, and log_ttyout
sudoers settings can be used to support more fine-grained I/O logging.
The sudo front-end no longer allocates a pseudo-terminal when running
a command if the I/O logging plugin requests logging of stdin, stdout,
or stderr but not terminal input/output.
* Quieted a libgcrypt run-time initialization warning.
This fixes Debian bug #1019428 and Ubuntu bug #1397663.
* Fixed a bug in visudo that caused literal backslashes to be removed
from the EDITOR environment variable. GitHub issue #179.
* The sudo Python plugin now implements the "find_spec" method instead
of the the deprecated "find_module". This fixes a test failure when
a newer version of setuptools that doesn't include "find_module" is
found on the system.
* Fixed a bug introduced in sudo 1.9.9 where sudo_logsrvd created
the process ID file, usually /var/run/sudo/sudo_logsrvd.pid, as
a directory instead of a plain file. The same bug could result
in I/O log directories that end in six or more X's being created
literally in addition to the name being used as a template for
the mkdtemp(3) function.
* Fixed a long-standing bug where a sudoers rule with a command
line argument of "", which indicates the command may be run with
no arguments, would also match a literal "" on the command line.
GitHub issue #182.
* Added the -I option to visudo which only edits the main sudoers
file. Include files are not edited unless a syntax error is found.
* Fixed "sudo -l -U otheruser" output when the runas list is empty.
Previously, sudo would list the invoking user instead of the
list user. GitHub issue #183.
* Fixed the display of command tags and options in "sudo -l" output
when the RunAs user or group changes. A new line is started for
RunAs changes which means we need to display the command tags
and options again. GitHub issue #184.
* The sesh helper program now uses getopt_long(3) to parse the
command line options.
* The embedded copy of zlib has been updated to version 1.2.13.
* Fixed a bug that prevented event log data from being sent to the
log server when I/O logging was not enabled. This only affected
systems without PAM or configurations where the pam_session and
pam_setcred options were disabled in the sudoers file.
* Fixed a bug where "sudo -l" output included a carriage return
after the newline. This is only needed when displaying to a
terminal in raw mode. Bug #1042.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Fri, 25 Nov 2022 08:54:59 +0000 (09:54 +0100)]
qemu: Update to version 7.1.0
- Update from 7.0.0 to 7.1.0
- Update of rootfile not required
- Removal of qemu-7.0.0-fix-glibc-headers.patch as an alternative patch approach has been
implemeted into thye source tarball.
- Changelog is too large to include here. Details can be found at
https://wiki.qemu.org/ChangeLog/7.1
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
projects / ipfire-2.x.git / log
