]>
Commit | Line | Data |
---|---|---|
9e0802bf JT |
1 | /* |
2 | * Xilinx ZC706 board DTS | |
3 | * | |
999667ca MS |
4 | * Copyright (C) 2011 - 2015 Xilinx |
5 | * Copyright (C) 2012 National Instruments Corp. | |
9e0802bf JT |
6 | * |
7 | * SPDX-License-Identifier: GPL-2.0+ | |
8 | */ | |
9 | /dts-v1/; | |
10 | #include "zynq-7000.dtsi" | |
11 | ||
12 | / { | |
999667ca | 13 | model = "Zynq ZC706 Development Board"; |
9e0802bf | 14 | compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; |
7d34c5de | 15 | |
9f9d41ba | 16 | aliases { |
999667ca MS |
17 | ethernet0 = &gem0; |
18 | i2c0 = &i2c0; | |
9f9d41ba | 19 | serial0 = &uart1; |
e94c71c0 | 20 | spi0 = &qspi; |
8647219b | 21 | mmc0 = &sdhci0; |
9f9d41ba MY |
22 | }; |
23 | ||
7d34c5de MY |
24 | memory { |
25 | device_type = "memory"; | |
999667ca | 26 | reg = <0x0 0x40000000>; |
7d34c5de | 27 | }; |
999667ca MS |
28 | |
29 | chosen { | |
936bbc5d | 30 | bootargs = ""; |
999667ca MS |
31 | stdout-path = "serial0:115200n8"; |
32 | }; | |
33 | ||
34 | usb_phy0: phy0 { | |
35 | compatible = "usb-nop-xceiv"; | |
36 | #phy-cells = <0>; | |
37 | }; | |
38 | }; | |
39 | ||
40 | &clkc { | |
41 | ps-clk-frequency = <33333333>; | |
42 | }; | |
43 | ||
44 | &gem0 { | |
45 | status = "okay"; | |
46 | phy-mode = "rgmii-id"; | |
47 | phy-handle = <ðernet_phy>; | |
48 | pinctrl-names = "default"; | |
49 | pinctrl-0 = <&pinctrl_gem0_default>; | |
50 | ||
51 | ethernet_phy: ethernet-phy@7 { | |
52 | reg = <7>; | |
53 | }; | |
54 | }; | |
55 | ||
56 | &gpio0 { | |
57 | pinctrl-names = "default"; | |
58 | pinctrl-0 = <&pinctrl_gpio0_default>; | |
59 | }; | |
60 | ||
61 | &i2c0 { | |
62 | status = "okay"; | |
63 | clock-frequency = <400000>; | |
64 | pinctrl-names = "default"; | |
65 | pinctrl-0 = <&pinctrl_i2c0_default>; | |
66 | ||
67 | i2cswitch@74 { | |
68 | compatible = "nxp,pca9548"; | |
69 | #address-cells = <1>; | |
70 | #size-cells = <0>; | |
71 | reg = <0x74>; | |
72 | ||
73 | i2c@0 { | |
74 | #address-cells = <1>; | |
75 | #size-cells = <0>; | |
76 | reg = <0>; | |
77 | si570: clock-generator@5d { | |
78 | #clock-cells = <0>; | |
79 | compatible = "silabs,si570"; | |
80 | temperature-stability = <50>; | |
81 | reg = <0x5d>; | |
82 | factory-fout = <156250000>; | |
83 | clock-frequency = <148500000>; | |
84 | }; | |
85 | }; | |
86 | ||
ac2c4074 CK |
87 | i2c@1 { |
88 | #address-cells = <1>; | |
89 | #size-cells = <0>; | |
90 | reg = <1>; | |
91 | adv7511: hdmi-tx@39 { | |
92 | compatible = "adi,adv7511"; | |
93 | reg = <0x39>; | |
94 | adi,input-depth = <8>; | |
95 | adi,input-colorspace = "yuv422"; | |
96 | adi,input-clock = "1x"; | |
97 | adi,input-style = <3>; | |
98 | adi,input-justification = "evenly"; | |
99 | }; | |
100 | }; | |
101 | ||
999667ca MS |
102 | i2c@2 { |
103 | #address-cells = <1>; | |
104 | #size-cells = <0>; | |
105 | reg = <2>; | |
106 | eeprom@54 { | |
107 | compatible = "at,24c08"; | |
108 | reg = <0x54>; | |
109 | }; | |
110 | }; | |
111 | ||
112 | i2c@3 { | |
113 | #address-cells = <1>; | |
114 | #size-cells = <0>; | |
115 | reg = <3>; | |
116 | gpio@21 { | |
117 | compatible = "ti,tca6416"; | |
118 | reg = <0x21>; | |
119 | gpio-controller; | |
120 | #gpio-cells = <2>; | |
121 | }; | |
122 | }; | |
123 | ||
124 | i2c@4 { | |
125 | #address-cells = <1>; | |
126 | #size-cells = <0>; | |
127 | reg = <4>; | |
128 | rtc@51 { | |
129 | compatible = "nxp,pcf8563"; | |
130 | reg = <0x51>; | |
131 | }; | |
132 | }; | |
133 | ||
134 | i2c@7 { | |
135 | #address-cells = <1>; | |
136 | #size-cells = <0>; | |
137 | reg = <7>; | |
138 | ucd90120@65 { | |
139 | compatible = "ti,ucd90120"; | |
140 | reg = <0x65>; | |
141 | }; | |
142 | }; | |
143 | }; | |
144 | }; | |
145 | ||
146 | &pinctrl0 { | |
147 | pinctrl_gem0_default: gem0-default { | |
148 | mux { | |
149 | function = "ethernet0"; | |
150 | groups = "ethernet0_0_grp"; | |
151 | }; | |
152 | ||
153 | conf { | |
154 | groups = "ethernet0_0_grp"; | |
155 | slew-rate = <0>; | |
156 | io-standard = <4>; | |
157 | }; | |
158 | ||
159 | conf-rx { | |
160 | pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; | |
161 | bias-high-impedance; | |
162 | low-power-disable; | |
163 | }; | |
164 | ||
165 | conf-tx { | |
166 | pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; | |
167 | low-power-enable; | |
168 | bias-disable; | |
169 | }; | |
170 | ||
171 | mux-mdio { | |
172 | function = "mdio0"; | |
173 | groups = "mdio0_0_grp"; | |
174 | }; | |
175 | ||
176 | conf-mdio { | |
177 | groups = "mdio0_0_grp"; | |
178 | slew-rate = <0>; | |
179 | io-standard = <1>; | |
180 | bias-disable; | |
181 | }; | |
182 | }; | |
183 | ||
184 | pinctrl_gpio0_default: gpio0-default { | |
185 | mux { | |
186 | function = "gpio0"; | |
187 | groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; | |
188 | }; | |
189 | ||
190 | conf { | |
191 | groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; | |
192 | slew-rate = <0>; | |
193 | io-standard = <1>; | |
194 | }; | |
195 | ||
196 | conf-pull-up { | |
197 | pins = "MIO46", "MIO47"; | |
198 | bias-pull-up; | |
199 | }; | |
200 | ||
201 | conf-pull-none { | |
202 | pins = "MIO7"; | |
203 | bias-disable; | |
204 | }; | |
205 | }; | |
206 | ||
207 | pinctrl_i2c0_default: i2c0-default { | |
208 | mux { | |
209 | groups = "i2c0_10_grp"; | |
210 | function = "i2c0"; | |
211 | }; | |
212 | ||
213 | conf { | |
214 | groups = "i2c0_10_grp"; | |
215 | bias-pull-up; | |
216 | slew-rate = <0>; | |
217 | io-standard = <1>; | |
218 | }; | |
219 | }; | |
220 | ||
221 | pinctrl_sdhci0_default: sdhci0-default { | |
222 | mux { | |
223 | groups = "sdio0_2_grp"; | |
224 | function = "sdio0"; | |
225 | }; | |
226 | ||
227 | conf { | |
228 | groups = "sdio0_2_grp"; | |
229 | slew-rate = <0>; | |
230 | io-standard = <1>; | |
231 | bias-disable; | |
232 | }; | |
233 | ||
234 | mux-cd { | |
235 | groups = "gpio0_14_grp"; | |
236 | function = "sdio0_cd"; | |
237 | }; | |
238 | ||
239 | conf-cd { | |
240 | groups = "gpio0_14_grp"; | |
241 | bias-high-impedance; | |
242 | bias-pull-up; | |
243 | slew-rate = <0>; | |
244 | io-standard = <1>; | |
245 | }; | |
246 | ||
247 | mux-wp { | |
248 | groups = "gpio0_15_grp"; | |
249 | function = "sdio0_wp"; | |
250 | }; | |
251 | ||
252 | conf-wp { | |
253 | groups = "gpio0_15_grp"; | |
254 | bias-high-impedance; | |
255 | bias-pull-up; | |
256 | slew-rate = <0>; | |
257 | io-standard = <1>; | |
258 | }; | |
259 | }; | |
260 | ||
261 | pinctrl_uart1_default: uart1-default { | |
262 | mux { | |
263 | groups = "uart1_10_grp"; | |
264 | function = "uart1"; | |
265 | }; | |
266 | ||
267 | conf { | |
268 | groups = "uart1_10_grp"; | |
269 | slew-rate = <0>; | |
270 | io-standard = <1>; | |
271 | }; | |
272 | ||
273 | conf-rx { | |
274 | pins = "MIO49"; | |
275 | bias-high-impedance; | |
276 | }; | |
277 | ||
278 | conf-tx { | |
279 | pins = "MIO48"; | |
280 | bias-disable; | |
281 | }; | |
282 | }; | |
283 | ||
284 | pinctrl_usb0_default: usb0-default { | |
285 | mux { | |
286 | groups = "usb0_0_grp"; | |
287 | function = "usb0"; | |
288 | }; | |
289 | ||
290 | conf { | |
291 | groups = "usb0_0_grp"; | |
292 | slew-rate = <0>; | |
293 | io-standard = <1>; | |
294 | }; | |
295 | ||
296 | conf-rx { | |
297 | pins = "MIO29", "MIO31", "MIO36"; | |
298 | bias-high-impedance; | |
299 | }; | |
300 | ||
301 | conf-tx { | |
302 | pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", | |
303 | "MIO35", "MIO37", "MIO38", "MIO39"; | |
304 | bias-disable; | |
305 | }; | |
306 | }; | |
307 | }; | |
308 | ||
309 | &sdhci0 { | |
8647219b | 310 | u-boot,dm-pre-reloc; |
999667ca MS |
311 | status = "okay"; |
312 | pinctrl-names = "default"; | |
313 | pinctrl-0 = <&pinctrl_sdhci0_default>; | |
314 | }; | |
315 | ||
316 | &uart1 { | |
035c6b27 | 317 | u-boot,dm-pre-reloc; |
999667ca MS |
318 | status = "okay"; |
319 | pinctrl-names = "default"; | |
320 | pinctrl-0 = <&pinctrl_uart1_default>; | |
321 | }; | |
322 | ||
e94c71c0 | 323 | &qspi { |
cb204a69 | 324 | u-boot,dm-pre-reloc; |
e94c71c0 JT |
325 | status = "okay"; |
326 | }; | |
327 | ||
999667ca MS |
328 | &usb0 { |
329 | status = "okay"; | |
330 | dr_mode = "host"; | |
331 | usb-phy = <&usb_phy0>; | |
332 | pinctrl-names = "default"; | |
333 | pinctrl-0 = <&pinctrl_usb0_default>; | |
9e0802bf | 334 | }; |