[people/ms/u-boot.git] / board / apollon / apollon.c

/*
 * (C) Copyright 2005-2007
 * Samsung Electronics.
 * Kyungmin Park <kyungmin.park@samsung.com>
 *
 * Derived from omap2420
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */
#include <common.h>
#include <asm/arch/omap2420.h>
#include <asm/io.h>
#include <asm/arch/bits.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/sys_info.h>
#include <asm/arch/mem.h>
#include <asm/mach-types.h>

void wait_for_command_complete(unsigned int wd_base);

DECLARE_GLOBAL_DATA_PTR;

#define write_config_reg(reg, value)					\
do {									\
	writeb(value, reg);						\
} while (0)

#define mask_config_reg(reg, mask)					\
do {									\
	char value = readb(reg) & ~(mask);				\
	writeb(value, reg);						\
} while (0)

/*******************************************************
 * Routine: delay
 * Description: spinning delay to use before udelay works
 ******************************************************/
static inline void delay(unsigned long loops)
{
	__asm__("1:\n" "subs %0, %1, #1\n"
		  "bne 1b":"=r" (loops):"0"(loops));
}

/*****************************************
 * Routine: board_init
 * Description: Early hardware init.
 *****************************************/
int board_init(void)
{
	gpmc_init();		/* in SRAM or SDRM, finish GPMC */

	gd->bd->bi_arch_number = 919;
	/* adress of boot parameters */
	gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0 + 0x100);

	return 0;
}

/**********************************************************
 * Routine: s_init
 * Description: Does early system init of muxing and clocks.
 * - Called path is with sram stack.
 **********************************************************/
void s_init(void)
{
	watchdog_init();
	set_muxconf_regs();
	delay(100);

	peripheral_enable();
	icache_enable();
}

/*******************************************************
 * Routine: misc_init_r
 * Description: Init ethernet (done here so udelay works)
 ********************************************************/
int misc_init_r(void)
{
	ether_init();		/* better done here so timers are init'ed */
	return (0);
}

/****************************************
 * Routine: watchdog_init
 * Description: Shut down watch dogs
 *****************************************/
void watchdog_init(void)
{
	/* There are 4 watch dogs.  1 secure, and 3 general purpose.
	 * The ROM takes care of the secure one. Of the 3 GP ones,
	 * 1 can reset us directly, the other 2 only generate MPU interrupts.
	 */
	__raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
	wait_for_command_complete(WD2_BASE);
	__raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);

#define MPU_WD_CLOCKED 1
#if MPU_WD_CLOCKED
	/* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
	__raw_writel(WD_UNLOCK1, WD3_BASE + WSPR);
	wait_for_command_complete(WD3_BASE);
	__raw_writel(WD_UNLOCK2, WD3_BASE + WSPR);

	__raw_writel(WD_UNLOCK1, WD4_BASE + WSPR);
	wait_for_command_complete(WD4_BASE);
	__raw_writel(WD_UNLOCK2, WD4_BASE + WSPR);
#endif
}

/******************************************************
 * Routine: wait_for_command_complete
 * Description: Wait for posting to finish on watchdog
 ******************************************************/
void wait_for_command_complete(unsigned int wd_base)
{
	int pending = 1;
	do {
		pending = __raw_readl(wd_base + WWPS);
	} while (pending);
}

/*******************************************************************
 * Routine:ether_init
 * Description: take the Ethernet controller out of reset and wait
 *		   for the EEPROM load to complete.
 ******************************************************************/
void ether_init(void)
{
#ifdef CONFIG_DRIVER_LAN91C96
	int cnt = 20;

	__raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2);	/*protect->gpio74 */

	__raw_writew(0x0, LAN_RESET_REGISTER);
	do {
		__raw_writew(0x1, LAN_RESET_REGISTER);
		udelay(100);
		if (cnt == 0)
			goto eth_reset_err_out;
		--cnt;
	} while (__raw_readw(LAN_RESET_REGISTER) != 0x1);

	cnt = 20;

	do {
		__raw_writew(0x0, LAN_RESET_REGISTER);
		udelay(100);
		if (cnt == 0)
			goto eth_reset_err_out;
		--cnt;
	} while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
	udelay(1000);

	mask_config_reg(ETH_CONTROL_REG, 0x01);
	udelay(1000);

eth_reset_err_out:
	return;
#endif
}

/**********************************************
 * Routine: dram_init
 * Description: sets uboots idea of sdram size
 **********************************************/
int dram_init(void)
{
	unsigned int size0 = 0, size1 = 0;
	u32 mtype, btype, rev = 0, cpu = 0;
#define NOT_EARLY 0

	btype = get_board_type();
	mtype = get_mem_type();
	rev = get_cpu_rev();
	cpu = get_cpu_type();

	display_board_info(btype);

	if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
		/* init other chip select */
		do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
	}

	size0 = get_sdr_cs_size(SDRC_CS0_OSET);
	size1 = get_sdr_cs_size(SDRC_CS1_OSET);

	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
	gd->bd->bi_dram[0].size = size0;
#if CONFIG_NR_DRAM_BANKS > 1
	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
	gd->bd->bi_dram[1].size = size1;
#endif

	return 0;
}

/**********************************************************
 * Routine: set_muxconf_regs
 * Description: Setting up the configuration Mux registers
 *              specific to the hardware
 *********************************************************/
void set_muxconf_regs(void)
{
	muxSetupSDRC();
	muxSetupGPMC();
	muxSetupUsb0();		/* USB Device */
	muxSetupUsbHost();	/* USB Host */
	muxSetupUART1();
	muxSetupLCD();
	muxSetupMMCSD();
	muxSetupTouchScreen();
}

/*****************************************************************
 * Routine: peripheral_enable
 * Description: Enable the clks & power for perifs (GPT2, UART1,...)
 ******************************************************************/
void peripheral_enable(void)
{
	unsigned int v, if_clks = 0, func_clks = 0;

	/* Enable GP2 timer. */
	if_clks |= BIT4 | BIT3;
	func_clks |= BIT4 | BIT3;
	/* Sys_clk input OMAP2420_GPT2 */
	v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2;
	__raw_writel(v, CM_CLKSEL2_CORE);
	__raw_writel(0x1, CM_CLKSEL_WKUP);

#ifdef CONFIG_SYS_NS16550
	/* Enable UART1 clock */
	func_clks |= BIT21;
	if_clks |= BIT21;
#endif
	/* Interface clocks on */
	v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;
	__raw_writel(v, CM_ICLKEN1_CORE);
	/* Functional Clocks on */
	v = __raw_readl(CM_FCLKEN1_CORE) | func_clks;
	__raw_writel(v, CM_FCLKEN1_CORE);
	delay(1000);

#ifndef KERNEL_UPDATED
	{
#define V1 0xffffffff
#define V2 0x00000007

		__raw_writel(V1, CM_FCLKEN1_CORE);
		__raw_writel(V2, CM_FCLKEN2_CORE);
		__raw_writel(V1, CM_ICLKEN1_CORE);
		__raw_writel(V1, CM_ICLKEN2_CORE);
	}
#endif
}

/****************************************
 * Routine: muxSetupUsb0   (ostboot)
 * Description: Setup usb muxing
 *****************************************/
void muxSetupUsb0(void)
{
	mask_config_reg(CONTROL_PADCONF_USB0_PUEN, 0x1f);
	mask_config_reg(CONTROL_PADCONF_USB0_VP, 0x1f);
	mask_config_reg(CONTROL_PADCONF_USB0_VM, 0x1f);
	mask_config_reg(CONTROL_PADCONF_USB0_RCV, 0x1f);
	mask_config_reg(CONTROL_PADCONF_USB0_TXEN, 0x1f);
	mask_config_reg(CONTROL_PADCONF_USB0_SE0, 0x1f);
	mask_config_reg(CONTROL_PADCONF_USB0_DAT, 0x1f);
}

/****************************************
 * Routine: muxSetupUSBHost   (ostboot)
 * Description: Setup USB Host muxing
 *****************************************/
void muxSetupUsbHost(void)
{
	/* V19 */
	write_config_reg(CONTROL_PADCONF_USB1_RCV, 1);
	/* W20 */
	write_config_reg(CONTROL_PADCONF_USB1_TXEN, 1);
	/* N14 */
	write_config_reg(CONTROL_PADCONF_GPIO69, 3);
	/* P15 */
	write_config_reg(CONTROL_PADCONF_GPIO70, 3);
	/* L18 */
	write_config_reg(CONTROL_PADCONF_GPIO102, 3);
	/* L19 */
	write_config_reg(CONTROL_PADCONF_GPIO103, 3);
	/* K15 */
	write_config_reg(CONTROL_PADCONF_GPIO104, 3);
	/* K14 */
	write_config_reg(CONTROL_PADCONF_GPIO105, 3);
}

/****************************************
 * Routine: muxSetupUART1  (ostboot)
 * Description: Set up uart1 muxing
 *****************************************/
void muxSetupUART1(void)
{
	/* UART1_CTS pin configuration, PIN = D21, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_UART1_CTS, 0);
	/* UART1_RTS pin configuration, PIN = H21, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_UART1_RTS, 0);
	/* UART1_TX pin configuration, PIN = L20, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_UART1_TX, 0);
	/* UART1_RX pin configuration, PIN = T21, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_UART1_RX, 0);
}

/****************************************
 * Routine: muxSetupLCD   (ostboot)
 * Description: Setup lcd muxing
 *****************************************/
void muxSetupLCD(void)
{
	/* LCD_D0 pin configuration, PIN = Y7, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D0, 0);
	/* LCD_D1 pin configuration, PIN = P10 , Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D1, 0);
	/* LCD_D2 pin configuration, PIN = V8, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D2, 0);
	/* LCD_D3 pin configuration, PIN = Y8, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D3, 0);
	/* LCD_D4 pin configuration, PIN = W8, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D4, 0);
	/* LCD_D5 pin configuration, PIN = R10, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D5, 0);
	/* LCD_D6 pin configuration, PIN = Y9, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D6, 0);
	/* LCD_D7 pin configuration, PIN = V9, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D7, 0);
	/* LCD_D8 pin configuration, PIN = W9, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D8, 0);
	/* LCD_D9 pin configuration, PIN = P11, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D9, 0);
	/* LCD_D10 pin configuration, PIN = V10, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D10, 0);
	/* LCD_D11 pin configuration, PIN = Y10, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D11, 0);
	/* LCD_D12 pin configuration, PIN = W10, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D12, 0);
	/* LCD_D13 pin configuration, PIN = R11, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D13, 0);
	/* LCD_D14 pin configuration, PIN = V11, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D14, 0);
	/* LCD_D15 pin configuration, PIN = W11, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D15, 0);
	/* LCD_D16 pin configuration, PIN = P12, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D16, 0);
	/* LCD_D17 pin configuration, PIN = R12, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_D17, 0);
	/* LCD_PCLK pin configuration, PIN = W6, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_PCLK, 0);
	/* LCD_VSYNC pin configuration, PIN = V7, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_VSYNC, 0);
	/* LCD_HSYNC pin configuration, PIN = Y6, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_HSYNC, 0);
	/* LCD_ACBIAS pin configuration, PIN = W7, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_DSS_ACBIAS, 0);
}

/****************************************
 * Routine: muxSetupMMCSD (ostboot)
 * Description: set up MMC muxing
 *****************************************/
void muxSetupMMCSD(void)
{
	/* SDMMC_CLKI pin configuration,  PIN = H15, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_CLKI, 0);
	/* SDMMC_CLKO pin configuration,  PIN = G19, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_CLKO, 0);
	/* SDMMC_CMD pin configuration,   PIN = H18, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_CMD, 0);
	/* SDMMC_DAT0 pin configuration,  PIN = F20, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_DAT0, 0);
	/* SDMMC_DAT1 pin configuration,  PIN = H14, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_DAT1, 0);
	/* SDMMC_DAT2 pin configuration,  PIN = E19, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_DAT2, 0);
	/* SDMMC_DAT3 pin configuration,  PIN = D19, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_DAT3, 0);
	/* SDMMC_DDIR0 pin configuration, PIN = F19, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR0, 0);
	/* SDMMC_DDIR1 pin configuration, PIN = E20, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR1, 0);
	/* SDMMC_DDIR2 pin configuration, PIN = F18, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR2, 0);
	/* SDMMC_DDIR3 pin configuration, PIN = E18, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR3, 0);
	/* SDMMC_CDIR pin configuration,  PIN = G18, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_MMC_CMD_DIR, 0);
}

/******************************************
 * Routine: muxSetupTouchScreen (ostboot)
 * Description:  Set up touch screen muxing
 *******************************************/
void muxSetupTouchScreen(void)
{
	/* SPI1_CLK pin configuration,  PIN = U18, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_SPI1_CLK, 0);
	/* SPI1_MOSI pin configuration, PIN = V20, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_SPI1_SIMO, 0);
	/* SPI1_MISO pin configuration, PIN = T18, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_SPI1_SOMI, 0);
	/* SPI1_nCS0 pin configuration, PIN = U19, Mode = 0, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_SPI1_NCS0, 0);
#define CONTROL_PADCONF_GPIO85	CONTROL_PADCONF_SPI1_NCS1
	/* PEN_IRQ pin configuration,   PIN = N15, Mode = 3, PUPD=Disabled */
	write_config_reg(CONTROL_PADCONF_GPIO85, 3);
}

/***************************************************************
 * Routine: muxSetupGPMC (ostboot)
 * Description: Configures balls which cam up in protected mode
 ***************************************************************/
void muxSetupGPMC(void)
{
	/* gpmc_io_dir, MCR */
	volatile unsigned int *MCR = (unsigned int *) 0x4800008C;
	*MCR = 0x19000000;

	/* NOR FLASH CS0 */
	/* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode 0; Byte-3 */
	write_config_reg(CONTROL_PADCONF_GPMC_D2_BYTE3, 0);
	/* MPDB(Multi Port Debug Port) CS1 */
	/* signal - gpmc_ncs1; pin - N8; offset - 0x008D; mode 0; Byte-1 */
	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE1, 0);
	/* signal - Gpmc_ncs2; pin - E2; offset - 0x008E; mode 0; Byte-2 */
	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE2, 0);
	/* signal - Gpmc_ncs3; pin - N2; offset - 0x008F; mode 0; Byte-3 */
	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE3, 0);
	/* signal - Gpmc_ncs4; pin - ??; offset - 0x0090; mode 0; Byte-4 */
	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE4, 0);
	/* signal - Gpmc_ncs5; pin - ??; offset - 0x0091; mode 0; Byte-5 */
	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE5, 0);
	/* signal - Gpmc_ncs6; pin - ??; offset - 0x0092; mode 0; Byte-6 */
	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE6, 0);
	/* signal - Gpmc_ncs7; pin - ??; offset - 0x0093; mode 0; Byte-7 */
	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE7, 0);
}

/****************************************************************
 * Routine: muxSetupSDRC  (ostboot)
 * Description: Configures balls which come up in protected mode
 ****************************************************************/
void muxSetupSDRC(void)
{
	/* It's set by IPL */
}
Commit	Line	Data
5ca9881a PP	1	/*
	2	* (C) Copyright 2005-2007
	3	* Samsung Electronics.
	4	* Kyungmin Park <kyungmin.park@samsung.com>
	5	*
	6	* Derived from omap2420
	7	*
	8	* See file CREDITS for list of people who contributed to this
	9	* project.
	10	*
	11	* This program is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of
	14	* the License, or (at your option) any later version.
	15	*
	16	* This program is distributed in the hope that it will be useful,
	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
	21	* You should have received a copy of the GNU General Public License
	22	* along with this program; if not, write to the Free Software
	23	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	24	* MA 02111-1307 USA
	25	*/
	26	#include <common.h>
	27	#include <asm/arch/omap2420.h>
	28	#include <asm/io.h>
	29	#include <asm/arch/bits.h>
	30	#include <asm/arch/mux.h>
	31	#include <asm/arch/sys_proto.h>
	32	#include <asm/arch/sys_info.h>
	33	#include <asm/arch/mem.h>
5ca9881a PP	34	#include <asm/mach-types.h>
	35
	36	void wait_for_command_complete(unsigned int wd_base);
	37
2db916e1 PP	38	DECLARE_GLOBAL_DATA_PTR;
	39
	40	#define write_config_reg(reg, value) \
	41	do { \
	42	writeb(value, reg); \
	43	} while (0)
	44
	45	#define mask_config_reg(reg, mask) \
	46	do { \
	47	char value = readb(reg) & ~(mask); \
	48	writeb(value, reg); \
	49	} while (0)
	50
5ca9881a PP	51	/*******************************************************
	52	* Routine: delay
	53	* Description: spinning delay to use before udelay works
2db916e1 PP	54	******************************************************/
	55	static inline void delay(unsigned long loops)
	56	{
	57	__asm__("1:\n" "subs %0, %1, #1\n"
	58	"bne 1b":"=r" (loops):"0"(loops));
	59	}
5ca9881a PP	60
	61	/*****************************************
	62	* Routine: board_init
	63	* Description: Early hardware init.
	64	*****************************************/
	65	int board_init(void)
	66	{
5ca9881a PP	67	gpmc_init(); /* in SRAM or SDRM, finish GPMC */
	68
	69	gd->bd->bi_arch_number = 919;
	70	/* adress of boot parameters */
	71	gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0 + 0x100);
	72
	73	return 0;
	74	}
	75
	76	/**********************************************************
	77	* Routine: s_init
	78	* Description: Does early system init of muxing and clocks.
	79	* - Called path is with sram stack.
	80	**********************************************************/
	81	void s_init(void)
	82	{
5ca9881a PP	83	watchdog_init();
	84	set_muxconf_regs();
	85	delay(100);
	86
	87	peripheral_enable();
	88	icache_enable();
	89	}
	90
	91	/*******************************************************
	92	* Routine: misc_init_r
	93	* Description: Init ethernet (done here so udelay works)
2db916e1	94	********************************************************/
5ca9881a PP	95	int misc_init_r(void)
	96	{
	97	ether_init(); /* better done here so timers are init'ed */
	98	return (0);
	99	}
	100
	101	/****************************************
	102	* Routine: watchdog_init
	103	* Description: Shut down watch dogs
	104	*****************************************/
	105	void watchdog_init(void)
	106	{
	107	/* There are 4 watch dogs. 1 secure, and 3 general purpose.
	108	* The ROM takes care of the secure one. Of the 3 GP ones,
	109	* 1 can reset us directly, the other 2 only generate MPU interrupts.
	110	*/
	111	__raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
	112	wait_for_command_complete(WD2_BASE);
	113	__raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
	114
	115	#define MPU_WD_CLOCKED 1
2db916e1 PP	116	#if MPU_WD_CLOCKED
2db916e1 PP	117	/* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
5ca9881a PP	118	__raw_writel(WD_UNLOCK1, WD3_BASE + WSPR);
	119	wait_for_command_complete(WD3_BASE);
	120	__raw_writel(WD_UNLOCK2, WD3_BASE + WSPR);
	121
	122	__raw_writel(WD_UNLOCK1, WD4_BASE + WSPR);
	123	wait_for_command_complete(WD4_BASE);
2db916e1 PP	124	__raw_writel(WD_UNLOCK2, WD4_BASE + WSPR);
2db916e1 PP	125	#endif
5ca9881a PP	126	}
	127
	128	/******************************************************
	129	* Routine: wait_for_command_complete
	130	* Description: Wait for posting to finish on watchdog
2db916e1 PP	131	******************************************************/
	132	void wait_for_command_complete(unsigned int wd_base)
	133	{
5ca9881a PP	134	int pending = 1;
	135	do {
	136	pending = __raw_readl(wd_base + WWPS);
	137	} while (pending);
	138	}
	139
	140	/*******************************************************************
	141	* Routine:ether_init
	142	* Description: take the Ethernet controller out of reset and wait
53677ef1	143	* for the EEPROM load to complete.
5ca9881a PP	144	******************************************************************/
	145	void ether_init(void)
	146	{
	147	#ifdef CONFIG_DRIVER_LAN91C96
	148	int cnt = 20;
	149
	150	__raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /protect->gpio74 /
	151
	152	__raw_writew(0x0, LAN_RESET_REGISTER);
	153	do {
	154	__raw_writew(0x1, LAN_RESET_REGISTER);
	155	udelay(100);
47042b36	156	if (cnt == 0)
5ca9881a	157	goto eth_reset_err_out;
5ca9881a PP	158	--cnt;
	159	} while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
	160
	161	cnt = 20;
	162
	163	do {
	164	__raw_writew(0x0, LAN_RESET_REGISTER);
	165	udelay(100);
47042b36	166	if (cnt == 0)
5ca9881a	167	goto eth_reset_err_out;
5ca9881a PP	168	--cnt;
	169	} while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
	170	udelay(1000);
	171
2db916e1	172	mask_config_reg(ETH_CONTROL_REG, 0x01);
5ca9881a PP	173	udelay(1000);
	174
	175	eth_reset_err_out:
	176	return;
	177	#endif
	178	}
	179
	180	/**********************************************
	181	* Routine: dram_init
	182	* Description: sets uboots idea of sdram size
2db916e1	183	**********************************************/
5ca9881a PP	184	int dram_init(void)
5ca9881a PP	185	{
5ca9881a PP	186	unsigned int size0 = 0, size1 = 0;
	187	u32 mtype, btype, rev = 0, cpu = 0;
	188	#define NOT_EARLY 0
	189
	190	btype = get_board_type();
	191	mtype = get_mem_type();
	192	rev = get_cpu_rev();
	193	cpu = get_cpu_type();
	194
	195	display_board_info(btype);
	196
	197	if ((mtype == DDR_COMBO) \|\| (mtype == DDR_STACKED)) {
2db916e1 PP	198	/* init other chip select */
2db916e1 PP	199	do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
5ca9881a PP	200	}
	201
	202	size0 = get_sdr_cs_size(SDRC_CS0_OSET);
	203	size1 = get_sdr_cs_size(SDRC_CS1_OSET);
	204
	205	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
	206	gd->bd->bi_dram[0].size = size0;
	207	#if CONFIG_NR_DRAM_BANKS > 1
	208	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
	209	gd->bd->bi_dram[1].size = size1;
	210	#endif
	211
	212	return 0;
	213	}
	214
	215	/**********************************************************
	216	* Routine: set_muxconf_regs
	217	* Description: Setting up the configuration Mux registers
	218	* specific to the hardware
	219	*********************************************************/
	220	void set_muxconf_regs(void)
	221	{
	222	muxSetupSDRC();
	223	muxSetupGPMC();
	224	muxSetupUsb0(); /* USB Device */
	225	muxSetupUsbHost(); /* USB Host */
	226	muxSetupUART1();
	227	muxSetupLCD();
	228	muxSetupMMCSD();
	229	muxSetupTouchScreen();
	230	}
	231
	232	/*****************************************************************
	233	* Routine: peripheral_enable
	234	* Description: Enable the clks & power for perifs (GPT2, UART1,...)
2db916e1	235	******************************************************************/
5ca9881a PP	236	void peripheral_enable(void)
	237	{
	238	unsigned int v, if_clks = 0, func_clks = 0;
	239
	240	/* Enable GP2 timer. */
	241	if_clks \|= BIT4 \| BIT3;
	242	func_clks \|= BIT4 \| BIT3;
2db916e1 PP	243	/* Sys_clk input OMAP2420_GPT2 */
2db916e1 PP	244	v = __raw_readl(CM_CLKSEL2_CORE) \| 0x4 \| 0x2;
5ca9881a PP	245	__raw_writel(v, CM_CLKSEL2_CORE);
	246	__raw_writel(0x1, CM_CLKSEL_WKUP);
	247
6d0f6bcf	248	#ifdef CONFIG_SYS_NS16550
5ca9881a PP	249	/* Enable UART1 clock */
	250	func_clks \|= BIT21;
	251	if_clks \|= BIT21;
	252	#endif
2db916e1 PP	253	/* Interface clocks on */
2db916e1 PP	254	v = __raw_readl(CM_ICLKEN1_CORE) \| if_clks;
5ca9881a	255	__raw_writel(v, CM_ICLKEN1_CORE);
2db916e1 PP	256	/* Functional Clocks on */
2db916e1 PP	257	v = __raw_readl(CM_FCLKEN1_CORE) \| func_clks;
5ca9881a PP	258	__raw_writel(v, CM_FCLKEN1_CORE);
	259	delay(1000);
	260
	261	#ifndef KERNEL_UPDATED
	262	{
	263	#define V1 0xffffffff
	264	#define V2 0x00000007
	265
	266	__raw_writel(V1, CM_FCLKEN1_CORE);
	267	__raw_writel(V2, CM_FCLKEN2_CORE);
	268	__raw_writel(V1, CM_ICLKEN1_CORE);
	269	__raw_writel(V1, CM_ICLKEN2_CORE);
	270	}
	271	#endif
	272	}
	273
	274	/****************************************
2db916e1	275	* Routine: muxSetupUsb0 (ostboot)
5ca9881a PP	276	* Description: Setup usb muxing
	277	*****************************************/
	278	void muxSetupUsb0(void)
	279	{
2db916e1 PP	280	mask_config_reg(CONTROL_PADCONF_USB0_PUEN, 0x1f);
	281	mask_config_reg(CONTROL_PADCONF_USB0_VP, 0x1f);
	282	mask_config_reg(CONTROL_PADCONF_USB0_VM, 0x1f);
	283	mask_config_reg(CONTROL_PADCONF_USB0_RCV, 0x1f);
	284	mask_config_reg(CONTROL_PADCONF_USB0_TXEN, 0x1f);
	285	mask_config_reg(CONTROL_PADCONF_USB0_SE0, 0x1f);
	286	mask_config_reg(CONTROL_PADCONF_USB0_DAT, 0x1f);
5ca9881a PP	287	}
5ca9881a PP	288
5ca9881a	289	/****************************************
2db916e1	290	* Routine: muxSetupUSBHost (ostboot)
5ca9881a PP	291	* Description: Setup USB Host muxing
	292	*****************************************/
	293	void muxSetupUsbHost(void)
	294	{
5ca9881a	295	/* V19 */
2db916e1	296	write_config_reg(CONTROL_PADCONF_USB1_RCV, 1);
5ca9881a	297	/* W20 */
2db916e1	298	write_config_reg(CONTROL_PADCONF_USB1_TXEN, 1);
5ca9881a	299	/* N14 */
2db916e1	300	write_config_reg(CONTROL_PADCONF_GPIO69, 3);
5ca9881a	301	/* P15 */
2db916e1	302	write_config_reg(CONTROL_PADCONF_GPIO70, 3);
5ca9881a	303	/* L18 */
2db916e1	304	write_config_reg(CONTROL_PADCONF_GPIO102, 3);
5ca9881a	305	/* L19 */
2db916e1	306	write_config_reg(CONTROL_PADCONF_GPIO103, 3);
5ca9881a	307	/* K15 */
2db916e1	308	write_config_reg(CONTROL_PADCONF_GPIO104, 3);
5ca9881a	309	/* K14 */
2db916e1	310	write_config_reg(CONTROL_PADCONF_GPIO105, 3);
5ca9881a PP	311	}
	312
	313	/****************************************
2db916e1	314	* Routine: muxSetupUART1 (ostboot)
5ca9881a PP	315	* Description: Set up uart1 muxing
	316	*****************************************/
	317	void muxSetupUART1(void)
	318	{
2db916e1 PP	319	/* UART1_CTS pin configuration, PIN = D21, Mode = 0, PUPD=Disabled */
	320	write_config_reg(CONTROL_PADCONF_UART1_CTS, 0);
	321	/* UART1_RTS pin configuration, PIN = H21, Mode = 0, PUPD=Disabled */
	322	write_config_reg(CONTROL_PADCONF_UART1_RTS, 0);
	323	/* UART1_TX pin configuration, PIN = L20, Mode = 0, PUPD=Disabled */
	324	write_config_reg(CONTROL_PADCONF_UART1_TX, 0);
	325	/* UART1_RX pin configuration, PIN = T21, Mode = 0, PUPD=Disabled */
	326	write_config_reg(CONTROL_PADCONF_UART1_RX, 0);
5ca9881a PP	327	}
	328
	329	/****************************************
2db916e1	330	* Routine: muxSetupLCD (ostboot)
5ca9881a PP	331	* Description: Setup lcd muxing
	332	*****************************************/
	333	void muxSetupLCD(void)
	334	{
2db916e1 PP	335	/* LCD_D0 pin configuration, PIN = Y7, Mode = 0, PUPD=Disabled */
	336	write_config_reg(CONTROL_PADCONF_DSS_D0, 0);
	337	/* LCD_D1 pin configuration, PIN = P10 , Mode = 0, PUPD=Disabled */
	338	write_config_reg(CONTROL_PADCONF_DSS_D1, 0);
	339	/* LCD_D2 pin configuration, PIN = V8, Mode = 0, PUPD=Disabled */
	340	write_config_reg(CONTROL_PADCONF_DSS_D2, 0);
	341	/* LCD_D3 pin configuration, PIN = Y8, Mode = 0, PUPD=Disabled */
	342	write_config_reg(CONTROL_PADCONF_DSS_D3, 0);
	343	/* LCD_D4 pin configuration, PIN = W8, Mode = 0, PUPD=Disabled */
	344	write_config_reg(CONTROL_PADCONF_DSS_D4, 0);
	345	/* LCD_D5 pin configuration, PIN = R10, Mode = 0, PUPD=Disabled */
	346	write_config_reg(CONTROL_PADCONF_DSS_D5, 0);
	347	/* LCD_D6 pin configuration, PIN = Y9, Mode = 0, PUPD=Disabled */
	348	write_config_reg(CONTROL_PADCONF_DSS_D6, 0);
	349	/* LCD_D7 pin configuration, PIN = V9, Mode = 0, PUPD=Disabled */
	350	write_config_reg(CONTROL_PADCONF_DSS_D7, 0);
	351	/* LCD_D8 pin configuration, PIN = W9, Mode = 0, PUPD=Disabled */
	352	write_config_reg(CONTROL_PADCONF_DSS_D8, 0);
	353	/* LCD_D9 pin configuration, PIN = P11, Mode = 0, PUPD=Disabled */
	354	write_config_reg(CONTROL_PADCONF_DSS_D9, 0);
	355	/* LCD_D10 pin configuration, PIN = V10, Mode = 0, PUPD=Disabled */
	356	write_config_reg(CONTROL_PADCONF_DSS_D10, 0);
	357	/* LCD_D11 pin configuration, PIN = Y10, Mode = 0, PUPD=Disabled */
	358	write_config_reg(CONTROL_PADCONF_DSS_D11, 0);
	359	/* LCD_D12 pin configuration, PIN = W10, Mode = 0, PUPD=Disabled */
	360	write_config_reg(CONTROL_PADCONF_DSS_D12, 0);
	361	/* LCD_D13 pin configuration, PIN = R11, Mode = 0, PUPD=Disabled */
	362	write_config_reg(CONTROL_PADCONF_DSS_D13, 0);
	363	/* LCD_D14 pin configuration, PIN = V11, Mode = 0, PUPD=Disabled */
	364	write_config_reg(CONTROL_PADCONF_DSS_D14, 0);
	365	/* LCD_D15 pin configuration, PIN = W11, Mode = 0, PUPD=Disabled */
	366	write_config_reg(CONTROL_PADCONF_DSS_D15, 0);
	367	/* LCD_D16 pin configuration, PIN = P12, Mode = 0, PUPD=Disabled */
	368	write_config_reg(CONTROL_PADCONF_DSS_D16, 0);
	369	/* LCD_D17 pin configuration, PIN = R12, Mode = 0, PUPD=Disabled */
	370	write_config_reg(CONTROL_PADCONF_DSS_D17, 0);
	371	/* LCD_PCLK pin configuration, PIN = W6, Mode = 0, PUPD=Disabled */
	372	write_config_reg(CONTROL_PADCONF_DSS_PCLK, 0);
	373	/* LCD_VSYNC pin configuration, PIN = V7, Mode = 0, PUPD=Disabled */
	374	write_config_reg(CONTROL_PADCONF_DSS_VSYNC, 0);
	375	/* LCD_HSYNC pin configuration, PIN = Y6, Mode = 0, PUPD=Disabled */
	376	write_config_reg(CONTROL_PADCONF_DSS_HSYNC, 0);
	377	/* LCD_ACBIAS pin configuration, PIN = W7, Mode = 0, PUPD=Disabled */
	378	write_config_reg(CONTROL_PADCONF_DSS_ACBIAS, 0);
5ca9881a PP	379	}
	380
	381	/****************************************
	382	* Routine: muxSetupMMCSD (ostboot)
	383	* Description: set up MMC muxing
	384	*****************************************/
	385	void muxSetupMMCSD(void)
	386	{
2db916e1 PP	387	/* SDMMC_CLKI pin configuration, PIN = H15, Mode = 0, PUPD=Disabled */
	388	write_config_reg(CONTROL_PADCONF_MMC_CLKI, 0);
	389	/* SDMMC_CLKO pin configuration, PIN = G19, Mode = 0, PUPD=Disabled */
	390	write_config_reg(CONTROL_PADCONF_MMC_CLKO, 0);
	391	/* SDMMC_CMD pin configuration, PIN = H18, Mode = 0, PUPD=Disabled */
	392	write_config_reg(CONTROL_PADCONF_MMC_CMD, 0);
	393	/* SDMMC_DAT0 pin configuration, PIN = F20, Mode = 0, PUPD=Disabled */
	394	write_config_reg(CONTROL_PADCONF_MMC_DAT0, 0);
	395	/* SDMMC_DAT1 pin configuration, PIN = H14, Mode = 0, PUPD=Disabled */
	396	write_config_reg(CONTROL_PADCONF_MMC_DAT1, 0);
	397	/* SDMMC_DAT2 pin configuration, PIN = E19, Mode = 0, PUPD=Disabled */
	398	write_config_reg(CONTROL_PADCONF_MMC_DAT2, 0);
	399	/* SDMMC_DAT3 pin configuration, PIN = D19, Mode = 0, PUPD=Disabled */
	400	write_config_reg(CONTROL_PADCONF_MMC_DAT3, 0);
	401	/* SDMMC_DDIR0 pin configuration, PIN = F19, Mode = 0, PUPD=Disabled */
	402	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR0, 0);
	403	/* SDMMC_DDIR1 pin configuration, PIN = E20, Mode = 0, PUPD=Disabled */
	404	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR1, 0);
	405	/* SDMMC_DDIR2 pin configuration, PIN = F18, Mode = 0, PUPD=Disabled */
	406	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR2, 0);
	407	/* SDMMC_DDIR3 pin configuration, PIN = E18, Mode = 0, PUPD=Disabled */
	408	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR3, 0);
	409	/* SDMMC_CDIR pin configuration, PIN = G18, Mode = 0, PUPD=Disabled */
	410	write_config_reg(CONTROL_PADCONF_MMC_CMD_DIR, 0);
5ca9881a PP	411	}
	412
	413	/******************************************
	414	* Routine: muxSetupTouchScreen (ostboot)
2db916e1 PP	415	* Description: Set up touch screen muxing
2db916e1 PP	416	*******************************************/
5ca9881a PP	417	void muxSetupTouchScreen(void)
5ca9881a PP	418	{
2db916e1 PP	419	/* SPI1_CLK pin configuration, PIN = U18, Mode = 0, PUPD=Disabled */
	420	write_config_reg(CONTROL_PADCONF_SPI1_CLK, 0);
	421	/* SPI1_MOSI pin configuration, PIN = V20, Mode = 0, PUPD=Disabled */
	422	write_config_reg(CONTROL_PADCONF_SPI1_SIMO, 0);
	423	/* SPI1_MISO pin configuration, PIN = T18, Mode = 0, PUPD=Disabled */
	424	write_config_reg(CONTROL_PADCONF_SPI1_SOMI, 0);
	425	/* SPI1_nCS0 pin configuration, PIN = U19, Mode = 0, PUPD=Disabled */
	426	write_config_reg(CONTROL_PADCONF_SPI1_NCS0, 0);
5ca9881a	427	#define CONTROL_PADCONF_GPIO85 CONTROL_PADCONF_SPI1_NCS1
2db916e1 PP	428	/* PEN_IRQ pin configuration, PIN = N15, Mode = 3, PUPD=Disabled */
2db916e1 PP	429	write_config_reg(CONTROL_PADCONF_GPIO85, 3);
5ca9881a PP	430	}
	431
	432	/***************************************************************
	433	* Routine: muxSetupGPMC (ostboot)
	434	* Description: Configures balls which cam up in protected mode
2db916e1	435	***************************************************************/
5ca9881a PP	436	void muxSetupGPMC(void)
5ca9881a PP	437	{
2db916e1	438	/* gpmc_io_dir, MCR */
751b9b51 KP	439	volatile unsigned int MCR = (unsigned int ) 0x4800008C;
751b9b51 KP	440	*MCR = 0x19000000;
5ca9881a PP	441
5ca9881a PP	442	/* NOR FLASH CS0 */
2db916e1 PP	443	/* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode 0; Byte-3 */
2db916e1 PP	444	write_config_reg(CONTROL_PADCONF_GPMC_D2_BYTE3, 0);
5ca9881a	445	/* MPDB(Multi Port Debug Port) CS1 */
2db916e1 PP	446	/* signal - gpmc_ncs1; pin - N8; offset - 0x008D; mode 0; Byte-1 */
	447	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE1, 0);
	448	/* signal - Gpmc_ncs2; pin - E2; offset - 0x008E; mode 0; Byte-2 */
	449	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE2, 0);
	450	/* signal - Gpmc_ncs3; pin - N2; offset - 0x008F; mode 0; Byte-3 */
	451	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE3, 0);
	452	/* signal - Gpmc_ncs4; pin - ??; offset - 0x0090; mode 0; Byte-4 */
	453	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE4, 0);
	454	/* signal - Gpmc_ncs5; pin - ??; offset - 0x0091; mode 0; Byte-5 */
	455	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE5, 0);
	456	/* signal - Gpmc_ncs6; pin - ??; offset - 0x0092; mode 0; Byte-6 */
	457	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE6, 0);
	458	/* signal - Gpmc_ncs7; pin - ??; offset - 0x0093; mode 0; Byte-7 */
	459	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE7, 0);
5ca9881a PP	460	}
	461
	462	/****************************************************************
2db916e1	463	* Routine: muxSetupSDRC (ostboot)
5ca9881a	464	* Description: Configures balls which come up in protected mode
2db916e1	465	****************************************************************/
5ca9881a PP	466	void muxSetupSDRC(void)
	467	{
	468	/* It's set by IPL */
	469	}