[people/ms/u-boot.git] / include / configs / 10m50_devboard.h

/*
 * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
 * Scott McNutt <smcnutt@psyent.com>
 * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * BOARD/CPU
 */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO_LATE

/*
 * SERIAL
 */
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* Suppress console info */
#define CONFIG_SYS_NS16550_MEM32

/*
 * Flash
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	1024
#define CONFIG_MTD_DEVICE

/*
 * NET options
 */
#define CONFIG_SYS_RX_ETH_BUFFER	0
#define CONFIG_CMD_MII
#define CONFIG_PHY_GIGE
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#define CONFIG_PHY_MARVELL

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * FDT options
 */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_LMB

/*
 * MEMORY ORGANIZATION
 * -Monitor at top of sdram.
 * -The heap is placed below the monitor
 * -The stack is placed below the heap (&grows down).
 */
#define CONFIG_SYS_SDRAM_BASE		0xc8000000
#define CONFIG_SYS_SDRAM_SIZE		0x08000000
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_SYS_MONITOR_LEN		0x80000	/* Reserve 512k */
#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + \
					 CONFIG_SYS_SDRAM_SIZE - \
					 CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_MALLOC_LEN		0x20000

/*
 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
 * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
 * reset address, no? This will keep the environment in user region
 * of flash. NOTE: the monitor length must be multiple of sector size
 * (which is common practice).
 */
#define CONFIG_ENV_IS_IN_FLASH

#define CONFIG_ENV_SIZE			0x10000	/* 64k, 1 sector */
#define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
#define CONFIG_ENV_ADDR			(0xf4000000 + CONFIG_SYS_MONITOR_LEN)

/*
 * MISC
 */
#define CONFIG_SYS_LONGHELP		/* Provide extended help */
#define CONFIG_SYS_CBSIZE		256	/* Console I/O buf size */
#define CONFIG_SYS_MAXARGS		16	/* Max command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Bootarg buf size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + \
					 16)	/* Print buf size */
#define CONFIG_SYS_LOAD_ADDR		0xcc000000	/* Half of RAM */
#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MONITOR_BASE - \
					 CONFIG_ENV_SIZE - \
					 CONFIG_SYS_MALLOC_LEN -	\
					 0x10000)
#define CONFIG_CMDLINE_EDITING

#endif /* __CONFIG_H */
Commit	Line	Data
5c0f9822 TC	1	/*
	2	* (C) Copyright 2005, Psyent Corporation <www.psyent.com>
	3	* Scott McNutt <smcnutt@psyent.com>
	4	* (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	/*
	13	* BOARD/CPU
	14	*/
	15	#define CONFIG_DISPLAY_CPUINFO
	16	#define CONFIG_DISPLAY_BOARDINFO_LATE
	17
	18	/*
	19	* SERIAL
	20	*/
	21	#define CONFIG_BAUDRATE 115200
	22	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */
2f3a5fee	23	#define CONFIG_SYS_NS16550_MEM32
5c0f9822 TC	24
	25	/*
	26	* Flash
	27	*/
	28	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	29	#define CONFIG_SYS_MAX_FLASH_SECT 1024
	30	#define CONFIG_MTD_DEVICE
	31
	32	/*
	33	* NET options
	34	*/
	35	#define CONFIG_SYS_RX_ETH_BUFFER 0
	36	#define CONFIG_CMD_MII
	37	#define CONFIG_PHY_GIGE
	38	#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	39	#define CONFIG_PHY_MARVELL
	40
	41	/*
	42	* BOOTP options
	43	*/
	44	#define CONFIG_BOOTP_BOOTFILESIZE
	45	#define CONFIG_BOOTP_BOOTPATH
	46	#define CONFIG_BOOTP_GATEWAY
	47	#define CONFIG_BOOTP_HOSTNAME
	48
	49	/*
	50	* FDT options
	51	*/
	52	#define CONFIG_OF_LIBFDT
	53	#define CONFIG_OF_BOARD_SETUP
	54	#define CONFIG_LMB
	55
5c0f9822 TC	56	/*
	57	* MEMORY ORGANIZATION
	58	* -Monitor at top of sdram.
	59	* -The heap is placed below the monitor
	60	* -The stack is placed below the heap (&grows down).
	61	*/
	62	#define CONFIG_SYS_SDRAM_BASE 0xc8000000
	63	#define CONFIG_SYS_SDRAM_SIZE 0x08000000
	64	#define CONFIG_NR_DRAM_BANKS 1
	65	#define CONFIG_MONITOR_IS_IN_RAM
7ef051ec	66	#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */
5c0f9822 TC	67	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
	68	CONFIG_SYS_SDRAM_SIZE - \
	69	CONFIG_SYS_MONITOR_LEN)
	70	#define CONFIG_SYS_MALLOC_LEN 0x20000
	71
2aee06a2 MV	72	/*
	73	* ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
	74	* CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
	75	* reset address, no? This will keep the environment in user region
	76	* of flash. NOTE: the monitor length must be multiple of sector size
	77	* (which is common practice).
	78	*/
	79	#define CONFIG_ENV_IS_IN_FLASH
	80
	81	#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */
	82	#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
	83	#define CONFIG_ENV_ADDR (0xf4000000 + CONFIG_SYS_MONITOR_LEN)
	84
5c0f9822 TC	85	/*
	86	* MISC
	87	*/
	88	#define CONFIG_SYS_LONGHELP /* Provide extended help */
	89	#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
	90	#define CONFIG_SYS_MAXARGS 16 /* Max command args */
	91	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
	92	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	93	sizeof(CONFIG_SYS_PROMPT) + \
	94	16) /* Print buf size */
bc3abe14 MV	95	#define CONFIG_SYS_LOAD_ADDR 0xcc000000 /* Half of RAM */
bc3abe14 MV	96	#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
5c0f9822 TC	97	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	98	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
	99	CONFIG_ENV_SIZE - \
	100	CONFIG_SYS_MALLOC_LEN - \
	101	0x10000)
	102	#define CONFIG_CMDLINE_EDITING
5c0f9822 TC	103
5c0f9822 TC	104	#endif /* __CONFIG_H */