[people/ms/u-boot.git] / include / configs / C29XPCIE.h

/*
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * C29XPCIE board configuration file
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_PHYS_64BIT

#ifdef CONFIG_C29XPCIE
#define CONFIG_PPC_C29X
#endif

#ifdef CONFIG_SPIFLASH
#define CONFIG_RAMBOOT_SPIFLASH
#define CONFIG_SYS_TEXT_BASE		0x11000000
#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
#endif

#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE		0xeff80000
#endif

#ifndef CONFIG_RESET_VECTOR_ADDRESS
#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
#endif

#ifndef CONFIG_SYS_MONITOR_BASE
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#endif

/* High Level Configuration Options */
#define CONFIG_BOOKE			/* BOOKE */
#define CONFIG_E500			/* BOOKE e500 family */
#define CONFIG_MPC85xx
#define CONFIG_FSL_IFC			/* Enable IFC Support */
#define CONFIG_SYS_HAS_SERDES		/* common SERDES init code */

#define CONFIG_PCI			/* Enable PCI/PCIE */
#ifdef CONFIG_PCI
#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */

#define CONFIG_CMD_NET
#define CONFIG_CMD_PCI

#define CONFIG_E1000

/*
 * PCI Windows
 * Memory space is mapped 1-1, but I/O space must start from 0.
 */
/* controller 1, Slot 1, tgtid 1, Base address a000 */
#define CONFIG_SYS_PCIE1_NAME		"Slot 1"
#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
#define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc00000ull

#define CONFIG_PCI_PNP			/* do pci plug-and-play */

#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
#define CONFIG_DOS_PARTITION
#endif

#define CONFIG_FSL_LAW			/* Use common FSL init code */
#define CONFIG_TSEC_ENET
#define CONFIG_ENV_OVERWRITE

#define CONFIG_DDR_CLK_FREQ	100000000
#define CONFIG_SYS_CLK_FREQ	66666666

#define CONFIG_HWCONFIG

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE			/* toggle L2 cache */
#define CONFIG_BTB			/* toggle branch predition */

#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */

#define CONFIG_ENABLE_36BIT_PHYS

#define CONFIG_ADDR_MAP			1
#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */

#define CONFIG_SYS_MEMTEST_START	0x00200000
#define CONFIG_SYS_MEMTEST_END		0x00400000
#define CONFIG_PANIC_HANG

/* DDR Setup */
#define CONFIG_FSL_DDR3
#define CONFIG_DDR_SPD
#define CONFIG_SYS_SPD_BUS_NUM		0
#define SPD_EEPROM_ADDRESS		0x50
#define CONFIG_SYS_DDR_RAW_TIMING

/* DDR ECC Setup*/
#define CONFIG_DDR_ECC
#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER

#define CONFIG_SYS_SDRAM_SIZE		512
#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	1

#define CONFIG_SYS_CCSRBAR		0xffe00000
#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR

/* Platform SRAM setting  */
#define CONFIG_SYS_PLATFORM_SRAM_BASE	0xffb00000
#define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \
			(0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE)
#define CONFIG_SYS_PLATFORM_SRAM_SIZE	(512 << 10)

/*
 * IFC Definitions
 */
/* NOR Flash on IFC */
#define CONFIG_SYS_FLASH_BASE		0xec000000
#define CONFIG_SYS_MAX_FLASH_SECT	512	/* 64M */

#define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)

#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_PHYS }
#define CONFIG_SYS_MAX_FLASH_BANKS	1

#define CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_FLASH_SHOW_PROGRESS	45
#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* in ms */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* in ms */

/* 16Bit NOR Flash - S29GL512S10TFI01 */
#define CONFIG_SYS_NOR_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
				CSPR_PORT_SIZE_16 | \
				CSPR_MSEL_NOR | \
				CSPR_V)
#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(64*1024*1024)
#define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(4)
#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
				FTIM0_NOR_TEADC(0x5) | \
				FTIM0_NOR_TEAHC(0x5))
#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x1e) | \
				FTIM1_NOR_TRAD_NOR(0x0f) | \
				FTIM1_NOR_TSEQRAD_NOR(0x0f))
#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
				FTIM2_NOR_TCH(0x4) | \
				FTIM2_NOR_TWP(0x1c))
#define CONFIG_SYS_NOR_FTIM3	0x0

/* CFI for NOR Flash */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

/* NAND Flash on IFC */
#define CONFIG_NAND_FSL_IFC
#define CONFIG_SYS_NAND_BASE		0xff800000
#define CONFIG_SYS_NAND_BASE_PHYS	0xfff800000ull

#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }

#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

/* 8Bit NAND Flash - K9F1G08U0B */
#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
				| CSPR_PORT_SIZE_8 \
				| CSPR_MSEL_NAND \
				| CSPR_V)
#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
#define CONFIG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \
				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \
				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */ \
				| CSOR_NAND_RAL_2	/* RAL = 2 Bytes */ \
				| CSOR_NAND_PGS_2K	/* Page Size = 2k */ \
				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */ \
				| CSOR_NAND_PB(64))	/* 64 Pages Per Block */
#define CONFIG_SYS_NAND_FTIM0	(FTIM0_NAND_TCCST(0x01) | \
				FTIM0_NAND_TWP(0x0c)   | \
				FTIM0_NAND_TWCHT(0x08) | \
				FTIM0_NAND_TWH(0x06))
#define CONFIG_SYS_NAND_FTIM1	(FTIM1_NAND_TADLE(0x28) | \
				FTIM1_NAND_TWBE(0x1d)  | \
				FTIM1_NAND_TRR(0x08)   | \
				FTIM1_NAND_TRP(0x0c))
#define CONFIG_SYS_NAND_FTIM2	(FTIM2_NAND_TRAD(0x0c) | \
				FTIM2_NAND_TREH(0x0a) | \
				FTIM2_NAND_TWHRE(0x18))
#define CONFIG_SYS_NAND_FTIM3	(FTIM3_NAND_TWW(0x04))

#define CONFIG_SYS_NAND_DDR_LAW		11

/* Set up IFC registers for boot location NOR/NAND */
#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR_CSPR
#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
#define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
#define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
#define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3

/* CPLD on IFC, selected by CS2 */
#define CONFIG_SYS_CPLD_BASE		0xffdf0000
#define CONFIG_SYS_CPLD_BASE_PHYS	(0xf00000000ull \
					| CONFIG_SYS_CPLD_BASE)

#define CONFIG_SYS_CSPR2	(CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
				| CSPR_PORT_SIZE_8 \
				| CSPR_MSEL_GPCM \
				| CSPR_V)
#define CONFIG_SYS_AMASK2	IFC_AMASK(64*1024)
#define CONFIG_SYS_CSOR2	0x0
/* CPLD Timing parameters for IFC CS2 */
#define CONFIG_SYS_CS2_FTIM0	(FTIM0_GPCM_TACSE(0x0e) | \
				FTIM0_GPCM_TEADC(0x0e) | \
				FTIM0_GPCM_TEAHC(0x0e))
#define CONFIG_SYS_CS2_FTIM1	(FTIM1_GPCM_TACO(0x0e) | \
				FTIM1_GPCM_TRAD(0x1f))
#define CONFIG_SYS_CS2_FTIM2	(FTIM2_GPCM_TCS(0x0e) | \
				FTIM2_GPCM_TCH(0x0) | \
				FTIM2_GPCM_TWP(0x1f))
#define CONFIG_SYS_CS2_FTIM3	0x0

#if defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_EXTRA_ENV_RELOC
#endif

#define CONFIG_BOARD_EARLY_INIT_R

#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000
#define CONFIG_SYS_INIT_RAM_END		0x00004000

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END \
						- GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)

/* Serial Port */
#define CONFIG_CONS_INDEX	1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)

#define CONFIG_SERIAL_MULTI		/* Enable both serial ports */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV

#define CONFIG_SYS_BAUDRATE_TABLE	\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)

/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER

/*
 * Pass open firmware flat tree
 */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS

/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */

#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	400000
#define CONFIG_SYS_FSL_I2C2_SPEED	400000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100

/* I2C EEPROM */
/* enable read and write access to EEPROM */
#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5

#define CONFIG_CMD_I2C

/* eSPI - Enhanced SPI */
#define CONFIG_FSL_ESPI
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_SPI_FLASH_EON
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED		10000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0

#ifdef CONFIG_TSEC_ENET
#define CONFIG_NET_MULTI
#define CONFIG_MII			/* MII PHY management */
#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
#define CONFIG_TSEC1		1
#define CONFIG_TSEC1_NAME	"eTSEC1"
#define CONFIG_TSEC2		1
#define CONFIG_TSEC2_NAME	"eTSEC2"

/* Default mode is RGMII mode */
#define TSEC1_PHY_ADDR		0
#define TSEC2_PHY_ADDR		2

#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)

#define CONFIG_ETHPRIME		"eTSEC1"

#define CONFIG_PHY_GIGE
#endif	/* CONFIG_TSEC_ENET */

/*
 * Environment
 */
#if defined(CONFIG_SYS_RAMBOOT)
#if defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SPI_BUS	0
#define CONFIG_ENV_SPI_CS	0
#define CONFIG_ENV_SPI_MAX_HZ	10000000
#define CONFIG_ENV_SPI_MODE	0
#define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
#define CONFIG_ENV_SECT_SIZE	0x10000
#define CONFIG_ENV_SIZE		0x2000
#endif
#else
#define CONFIG_ENV_IS_IN_FLASH
#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
#define CONFIG_ENV_ADDR	0xfff80000
#else
#define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#endif
#define CONFIG_ENV_SIZE		0x2000
#define CONFIG_ENV_SECT_SIZE	0x20000
#endif

#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ERRATA
#define CONFIG_CMD_ELF
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_REGINFO

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */

#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
						/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
#define CONFIG_SYS_HZ		1000		/* dec freq: 1ms ticks */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 64 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */

/*
 * Environment Configuration
 */

#ifdef CONFIG_TSEC_ENET
#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#endif

#define CONFIG_ROOTPATH		"/opt/nfsroot"
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_UBOOTPATH	u-boot.bin/* U-Boot image on TFTP server */

/* default location for tftp and bootm */
#define CONFIG_LOADADDR		1000000

#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */

#define CONFIG_BAUDRATE		115200

#define	CONFIG_EXTRA_ENV_SETTINGS				\
	"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"	\
	"netdev=eth0\0"						\
	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
	"loadaddr=1000000\0"				\
	"consoledev=ttyS0\0"				\
	"ramdiskaddr=2000000\0"				\
	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\
	"fdtaddr=c00000\0"				\
	"fdtfile=name/of/device-tree.dtb\0"			\
	"othbootargs=ramdisk_size=600000\0"		\

#define CONFIG_RAMBOOTCOMMAND			\
	"setenv bootargs root=/dev/ram rw "	\
	"console=$consoledev,$baudrate $othbootargs; "	\
	"tftp $ramdiskaddr $ramdiskfile;"	\
	"tftp $loadaddr $bootfile;"		\
	"tftp $fdtaddr $fdtfile;"		\
	"bootm $loadaddr $ramdiskaddr $fdtaddr"

#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND

#endif	/* __CONFIG_H */
Commit	Line	Data
a8d9758d MH	1	/*
	2	* Copyright 2013 Freescale Semiconductor, Inc.
	3	*
3aab0cd8	4	* SPDX-License-Identifier: GPL-2.0+
a8d9758d MH	5	*/
	6
	7	/*
	8	* C29XPCIE board configuration file
	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
	14	#define CONFIG_PHYS_64BIT
	15
	16	#ifdef CONFIG_C29XPCIE
	17	#define CONFIG_PPC_C29X
	18	#endif
	19
	20	#ifdef CONFIG_SPIFLASH
	21	#define CONFIG_RAMBOOT_SPIFLASH
	22	#define CONFIG_SYS_TEXT_BASE 0x11000000
	23	#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
	24	#endif
	25
	26	#ifndef CONFIG_SYS_TEXT_BASE
	27	#define CONFIG_SYS_TEXT_BASE 0xeff80000
	28	#endif
	29
	30	#ifndef CONFIG_RESET_VECTOR_ADDRESS
	31	#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
	32	#endif
	33
	34	#ifndef CONFIG_SYS_MONITOR_BASE
	35	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	36	#endif
	37
	38	/* High Level Configuration Options */
	39	#define CONFIG_BOOKE /* BOOKE */
	40	#define CONFIG_E500 /* BOOKE e500 family */
	41	#define CONFIG_MPC85xx
	42	#define CONFIG_FSL_IFC /* Enable IFC Support */
	43	#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
	44
	45	#define CONFIG_PCI /* Enable PCI/PCIE */
	46	#ifdef CONFIG_PCI
	47	#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
	48	#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
	49	#define CONFIG_PCI_INDIRECT_BRIDGE
	50	#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
	51	#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
	52
	53	#define CONFIG_CMD_NET
	54	#define CONFIG_CMD_PCI
	55
	56	#define CONFIG_E1000
	57
	58	/*
	59	* PCI Windows
	60	* Memory space is mapped 1-1, but I/O space must start from 0.
	61	*/
	62	/* controller 1, Slot 1, tgtid 1, Base address a000 */
	63	#define CONFIG_SYS_PCIE1_NAME "Slot 1"
	64	#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
	65	#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
	66	#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
	67	#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */
	68	#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
69	#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
70	#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
71	#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
72
73	#define CONFIG_PCI_PNP /* do pci plug-and-play */
74
75	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
76	#define CONFIG_DOS_PARTITION
77	#endif
78
79	#define CONFIG_FSL_LAW /* Use common FSL init code */
80	#define CONFIG_TSEC_ENET
81	#define CONFIG_ENV_OVERWRITE
82
83	#define CONFIG_DDR_CLK_FREQ 100000000
84	#define CONFIG_SYS_CLK_FREQ 66666666
85
86	#define CONFIG_HWCONFIG
87
88	/*
89	* These can be toggled for performance analysis, otherwise use default.
90	*/
91	#define CONFIG_L2_CACHE /* toggle L2 cache */
92	#define CONFIG_BTB /* toggle branch predition */
93
94	#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
95
96	#define CONFIG_ENABLE_36BIT_PHYS
97
98	#define CONFIG_ADDR_MAP 1
99	#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
100
101	#define CONFIG_SYS_MEMTEST_START 0x00200000
102	#define CONFIG_SYS_MEMTEST_END 0x00400000
103	#define CONFIG_PANIC_HANG
104
105	/* DDR Setup */
106	#define CONFIG_FSL_DDR3
107	#define CONFIG_DDR_SPD
108	#define CONFIG_SYS_SPD_BUS_NUM 0
109	#define SPD_EEPROM_ADDRESS 0x50
110	#define CONFIG_SYS_DDR_RAW_TIMING
111
112	/* DDR ECC Setup*/
113	#define CONFIG_DDR_ECC
114	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
115	#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
116
117	#define CONFIG_SYS_SDRAM_SIZE 512
118	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
119	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
120
121	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
122	#define CONFIG_CHIP_SELECTS_PER_CTRL 1
123
124	#define CONFIG_SYS_CCSRBAR 0xffe00000
125	#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
126
127	/* Platform SRAM setting */
128	#define CONFIG_SYS_PLATFORM_SRAM_BASE 0xffb00000
129	#define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \
130	(0xf00000000ull \| CONFIG_SYS_PLATFORM_SRAM_BASE)
131	#define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10)
132
133	/*
134	* IFC Definitions
135	*/
136	/* NOR Flash on IFC */
137	#define CONFIG_SYS_FLASH_BASE 0xec000000
138	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
139
140	#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull \| CONFIG_SYS_FLASH_BASE)
141
142	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
143	#define CONFIG_SYS_MAX_FLASH_BANKS 1
144
145	#define CONFIG_SYS_FLASH_QUIET_TEST
146	#define CONFIG_FLASH_SHOW_PROGRESS 45
147	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* in ms */
148	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* in ms */
149
150	/* 16Bit NOR Flash - S29GL512S10TFI01 */
151	#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \| \
152	CSPR_PORT_SIZE_16 \| \
153	CSPR_MSEL_NOR \| \
154	CSPR_V)
155	#define CONFIG_SYS_NOR_AMASK IFC_AMASK(6410241024)
156	#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4)
157	#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) \| \
158	FTIM0_NOR_TEADC(0x5) \| \
159	FTIM0_NOR_TEAHC(0x5))
160	#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1e) \| \
161	FTIM1_NOR_TRAD_NOR(0x0f) \| \
162	FTIM1_NOR_TSEQRAD_NOR(0x0f))
163	#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) \| \
164	FTIM2_NOR_TCH(0x4) \| \
165	FTIM2_NOR_TWP(0x1c))
166	#define CONFIG_SYS_NOR_FTIM3 0x0
167
168	/* CFI for NOR Flash */
169	#define CONFIG_FLASH_CFI_DRIVER
170	#define CONFIG_SYS_FLASH_CFI
171	#define CONFIG_SYS_FLASH_EMPTY_INFO
172	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
173
174	/* NAND Flash on IFC */
175	#define CONFIG_NAND_FSL_IFC
176	#define CONFIG_SYS_NAND_BASE 0xff800000
177	#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull
178
179	#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
180
181	#define CONFIG_SYS_MAX_NAND_DEVICE 1
182	#define CONFIG_MTD_NAND_VERIFY_WRITE
183	#define CONFIG_CMD_NAND
184	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
185
186	/* 8Bit NAND Flash - K9F1G08U0B */
187	#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
188	\| CSPR_PORT_SIZE_8 \
189	\| CSPR_MSEL_NAND \
190	\| CSPR_V)
191	#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
192	#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
193	\| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
194	\| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
195	\| CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \
196	\| CSOR_NAND_PGS_2K /* Page Size = 2k */ \
197	\| CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \
198	\| CSOR_NAND_PB(64)) /* 64 Pages Per Block */
199	#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) \| \
200	FTIM0_NAND_TWP(0x0c) \| \
201	FTIM0_NAND_TWCHT(0x08) \| \
202	FTIM0_NAND_TWH(0x06))
203	#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x28) \| \
204	FTIM1_NAND_TWBE(0x1d) \| \
205	FTIM1_NAND_TRR(0x08) \| \
206	FTIM1_NAND_TRP(0x0c))
207	#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0c) \| \
208	FTIM2_NAND_TREH(0x0a) \| \
209	FTIM2_NAND_TWHRE(0x18))
210	#define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x04))
211
212	#define CONFIG_SYS_NAND_DDR_LAW 11
213
214	/* Set up IFC registers for boot location NOR/NAND */
215	#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR
216	#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
217	#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
218	#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
219	#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
220	#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
221	#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
222	#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
223	#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
224	#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
225	#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
226	#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
227	#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
228	#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
229
230	/* CPLD on IFC, selected by CS2 */
231	#define CONFIG_SYS_CPLD_BASE 0xffdf0000
232	#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull \
233	\| CONFIG_SYS_CPLD_BASE)
234
235	#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
236	\| CSPR_PORT_SIZE_8 \
237	\| CSPR_MSEL_GPCM \
238	\| CSPR_V)
239	#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024)
240	#define CONFIG_SYS_CSOR2 0x0
241	/* CPLD Timing parameters for IFC CS2 */
242	#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) \| \
243	FTIM0_GPCM_TEADC(0x0e) \| \
244	FTIM0_GPCM_TEAHC(0x0e))
245	#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) \| \
246	FTIM1_GPCM_TRAD(0x1f))
247	#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) \| \
248	FTIM2_GPCM_TCH(0x0) \| \
249	FTIM2_GPCM_TWP(0x1f))
250	#define CONFIG_SYS_CS2_FTIM3 0x0
251
252	#if defined(CONFIG_RAMBOOT_SPIFLASH)
253	#define CONFIG_SYS_RAMBOOT
254	#define CONFIG_SYS_EXTRA_ENV_RELOC
255	#endif
256
257	#define CONFIG_BOARD_EARLY_INIT_R
258
259	#define CONFIG_SYS_INIT_RAM_LOCK
260	#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000
261	#define CONFIG_SYS_INIT_RAM_END 0x00004000
262
263	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \
264	- GENERATED_GBL_DATA_SIZE)
265	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
266
267	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
268	#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
269
270	/* Serial Port */
271	#define CONFIG_CONS_INDEX 1
272	#define CONFIG_SYS_NS16550
273	#define CONFIG_SYS_NS16550_SERIAL
274	#define CONFIG_SYS_NS16550_REG_SIZE 1
275	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
276
277	#define CONFIG_SERIAL_MULTI /* Enable both serial ports */
278	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
279
280	#define CONFIG_SYS_BAUDRATE_TABLE \
281	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
282
283	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
284	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
285
286	/* Use the HUSH parser */
287	#define CONFIG_SYS_HUSH_PARSER
288
289	/*
290	* Pass open firmware flat tree
291	*/
292	#define CONFIG_OF_LIBFDT
293	#define CONFIG_OF_BOARD_SETUP
294	#define CONFIG_OF_STDOUT_VIA_ALIAS
295
296	/* new uImage format support */
297	#define CONFIG_FIT
298	#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
299
300	#define CONFIG_SYS_I2C
301	#define CONFIG_SYS_I2C_FSL
302	#define CONFIG_SYS_FSL_I2C_SPEED 400000
303	#define CONFIG_SYS_FSL_I2C2_SPEED 400000
304	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
305	#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
306	#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
307	#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
308
309	/* I2C EEPROM */
310	/* enable read and write access to EEPROM */
311	#define CONFIG_CMD_EEPROM
312	#define CONFIG_SYS_I2C_MULTI_EEPROMS
313	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
314	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
315	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
316
317	#define CONFIG_CMD_I2C
318
319	/* eSPI - Enhanced SPI */
320	#define CONFIG_FSL_ESPI
321	#define CONFIG_SPI_FLASH
322	#define CONFIG_SPI_FLASH_SPANSION
323	#define CONFIG_SPI_FLASH_EON
324	#define CONFIG_CMD_SF
325	#define CONFIG_SF_DEFAULT_SPEED 10000000
326	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
327
328	#ifdef CONFIG_TSEC_ENET
329	#define CONFIG_NET_MULTI
330	#define CONFIG_MII /* MII PHY management */
331	#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
332	#define CONFIG_TSEC1 1
333	#define CONFIG_TSEC1_NAME "eTSEC1"
334	#define CONFIG_TSEC2 1
335	#define CONFIG_TSEC2_NAME "eTSEC2"
336
337	/* Default mode is RGMII mode */
338	#define TSEC1_PHY_ADDR 0
339	#define TSEC2_PHY_ADDR 2
340
341	#define TSEC1_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
342	#define TSEC2_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
343
344	#define CONFIG_ETHPRIME "eTSEC1"
345
346	#define CONFIG_PHY_GIGE
347	#endif /* CONFIG_TSEC_ENET */
348
349	/*
350	* Environment
351	*/
352	#if defined(CONFIG_SYS_RAMBOOT)
353	#if defined(CONFIG_RAMBOOT_SPIFLASH)
354	#define CONFIG_ENV_IS_IN_SPI_FLASH
355	#define CONFIG_ENV_SPI_BUS 0
356	#define CONFIG_ENV_SPI_CS 0
357	#define CONFIG_ENV_SPI_MAX_HZ 10000000
358	#define CONFIG_ENV_SPI_MODE 0
359	#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
360	#define CONFIG_ENV_SECT_SIZE 0x10000
361	#define CONFIG_ENV_SIZE 0x2000
362	#endif
363	#else
364	#define CONFIG_ENV_IS_IN_FLASH
365	#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
366	#define CONFIG_ENV_ADDR 0xfff80000
367	#else
368	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
369	#endif
370	#define CONFIG_ENV_SIZE 0x2000
371	#define CONFIG_ENV_SECT_SIZE 0x20000
372	#endif
373
374	#define CONFIG_LOADS_ECHO
375	#define CONFIG_SYS_LOADS_BAUD_CHANGE
376
377	/*
378	* Command line configuration.
379	*/
380	#include <config_cmd_default.h>
381
382	#define CONFIG_CMD_ERRATA
383	#define CONFIG_CMD_ELF
384	#define CONFIG_CMD_IRQ
385	#define CONFIG_CMD_MII
386	#define CONFIG_CMD_PING
387	#define CONFIG_CMD_SETEXPR
388	#define CONFIG_CMD_REGINFO
389
390	/*
391	* Miscellaneous configurable options
392	*/
393	#define CONFIG_SYS_LONGHELP /* undef to save memory */
394	#define CONFIG_CMDLINE_EDITING /* Command-line editing */
395	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
396	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
397	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
398
399	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
400	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
401	/* Print Buffer Size */
402	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
403	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
404	#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */
405
406	/*
407	* For booting Linux, the board info and command line data
408	* have to be in the first 64 MB of memory, since this is
409	* the maximum mapped by the Linux kernel during initialization.
410	*/
411	#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
412	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
413
414	/*
415	* Environment Configuration
416	*/
417
418	#ifdef CONFIG_TSEC_ENET
419	#define CONFIG_HAS_ETH0
420	#define CONFIG_HAS_ETH1
421	#endif
422
423	#define CONFIG_ROOTPATH "/opt/nfsroot"
424	#define CONFIG_BOOTFILE "uImage"
425	#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */
426
427	/* default location for tftp and bootm */
428	#define CONFIG_LOADADDR 1000000
429
430	#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
431
432	#define CONFIG_BAUDRATE 115200
433
434	#define CONFIG_EXTRA_ENV_SETTINGS \
435	"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \
436	"netdev=eth0\0" \
437	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
438	"loadaddr=1000000\0" \
439	"consoledev=ttyS0\0" \
440	"ramdiskaddr=2000000\0" \
441	"ramdiskfile=rootfs.ext2.gz.uboot\0" \
442	"fdtaddr=c00000\0" \
443	"fdtfile=name/of/device-tree.dtb\0" \
444	"othbootargs=ramdisk_size=600000\0" \
445
446	#define CONFIG_RAMBOOTCOMMAND \
447	"setenv bootargs root=/dev/ram rw " \
448	"console=$consoledev,$baudrate $othbootargs; " \
449	"tftp $ramdiskaddr $ramdiskfile;" \
450	"tftp $loadaddr $bootfile;" \
451	"tftp $fdtaddr $fdtfile;" \
452	"bootm $loadaddr $ramdiskaddr $fdtaddr"
453
454	#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
455
456	#endif /* __CONFIG_H */