[people/ms/u-boot.git] / include / configs / advantech_dms-ba16.h

/*
 * Copyright (C) 2016 Timesys Corporation
 * Copyright (C) 2016 Advantech Corporation
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __ADVANTECH_DMSBA16_CONFIG_H
#define __ADVANTECH_DMSBA16_CONFIG_H

#include <asm/arch/imx-regs.h>
#include <asm/mach-imx/gpio.h>

#define CONFIG_BOARD_NAME	"Advantech DMS-BA16"

#define CONFIG_MXC_UART_BASE	UART4_BASE
#define CONSOLE_DEV	"ttymxc3"
#define CONFIG_EXTRA_BOOTARGS	"panic=10"

#define CONFIG_BOOT_DIR	""
#define CONFIG_LOADCMD "fatload"
#define CONFIG_RFSPART "2"

#define CONFIG_SUPPORT_EMMC_BOOT

#include "mx6_common.h"
#include <linux/sizes.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART

#define CONFIG_MXC_OCOTP

/* SATA Configs */
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_BOUNCE_BUFFER

/* USB Configs */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

#define CONFIG_USBD_HS
#define CONFIG_USB_FUNCTION_MASS_STORAGE

/* Networking Configs */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME		"FEC"
#define CONFIG_FEC_MXC_PHYADDR		4
#define CONFIG_PHY_ATHEROS

/* Serial Flash */
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED	20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	1

#define CONFIG_LOADADDR	0x12000000
#define CONFIG_SYS_TEXT_BASE	0x17800000

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=" CONFIG_BOOT_DIR "/uImage\0" \
	"uboot=u-boot.imx\0" \
	"fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=yes\0" \
	"ip_dyn=yes\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"sddev=0\0" \
	"emmcdev=1\0" \
	"partnum=1\0" \
	"loadcmd=" CONFIG_LOADCMD "\0" \
	"rfspart=" CONFIG_RFSPART "\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"update_sf_uboot=" \
		"if tftp $loadaddr $uboot; then " \
			"sf probe; " \
			"sf erase 0 0xC0000; " \
			"sf write $loadaddr 0x400 $filesize; " \
			"echo 'U-Boot upgraded. Please reset'; " \
		"fi\0" \
	"setargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
	"loadbootscript=" \
		"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
		" source\0" \
	"loadimage=" \
		"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	"loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	"tryboot=" \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run doboot; " \
			"fi; " \
		"fi;\0" \
	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
		"run setargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \

#define CONFIG_BOOTCOMMAND \
	"usb start; " \
	"setenv dev usb; " \
	"setenv devnum 0; " \
	"setenv rootdev sda${rfspart}; " \
	"run tryboot; " \
	\
	"setenv dev mmc; " \
	"setenv rootdev mmcblk0p${rfspart}; " \
	\
	"setenv devnum ${sddev}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \
	\
	"setenv devnum ${emmcdev}; " \
	"setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \
	\
	"bmode usb; " \

#define CONFIG_ARP_TIMEOUT     200UL

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END         0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */

#define CONFIG_ENV_SIZE                 (8 * 1024)
#define CONFIG_ENV_OFFSET               (768 * 1024)
#define CONFIG_ENV_SECT_SIZE            (64 * 1024)
#define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED

#ifndef CONFIG_SYS_DCACHE_OFF
#endif

#define CONFIG_SYS_FSL_USDHC_NUM        3

/* Framebuffer */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#endif

#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK         66000000

#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED            100000
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_MXC_I2C2
#define CONFIG_SYS_I2C_MXC_I2C3

#endif	/* __ADVANTECH_DMSBA16_CONFIG_H */
Commit	Line	Data
ff383220 AB	1	/*
	2	* Copyright (C) 2016 Timesys Corporation
	3	* Copyright (C) 2016 Advantech Corporation
	4	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __ADVANTECH_DMSBA16_CONFIG_H
	10	#define __ADVANTECH_DMSBA16_CONFIG_H
	11
	12	#include <asm/arch/imx-regs.h>
552a848e	13	#include <asm/mach-imx/gpio.h>
ff383220 AB	14
ff383220 AB	15	#define CONFIG_BOARD_NAME "Advantech DMS-BA16"
ff383220 AB	16
ff383220 AB	17	#define CONFIG_MXC_UART_BASE UART4_BASE
12ca05a3	18	#define CONSOLE_DEV "ttymxc3"
ff383220 AB	19	#define CONFIG_EXTRA_BOOTARGS "panic=10"
	20
	21	#define CONFIG_BOOT_DIR ""
	22	#define CONFIG_LOADCMD "fatload"
	23	#define CONFIG_RFSPART "2"
	24
	25	#define CONFIG_SUPPORT_EMMC_BOOT
	26
	27	#include "mx6_common.h"
	28	#include <linux/sizes.h>
	29
ff383220 AB	30	#define CONFIG_CMDLINE_TAG
	31	#define CONFIG_SETUP_MEMORY_TAGS
	32	#define CONFIG_INITRD_TAG
	33	#define CONFIG_REVISION_TAG
	34	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	35
ff383220 AB	36	#define CONFIG_MXC_GPIO
	37	#define CONFIG_MXC_UART
	38
ff383220 AB	39	#define CONFIG_MXC_OCOTP
	40
	41	/* SATA Configs */
ff383220 AB	42	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	43	#define CONFIG_DWC_AHSATA_PORT_ID 0
	44	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	45	#define CONFIG_LBA48
	46	#define CONFIG_LIBATA
	47
	48	/* MMC Configs */
	49	#define CONFIG_FSL_ESDHC
	50	#define CONFIG_FSL_USDHC
	51	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
ff383220	52	#define CONFIG_BOUNCE_BUFFER
ff383220 AB	53
ff383220 AB	54	/* USB Configs */
ff383220 AB	55	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	56	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	57	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	58	#define CONFIG_MXC_USB_FLAGS 0
ff383220 AB	59
	60	#define CONFIG_USBD_HS
	61	#define CONFIG_USB_FUNCTION_MASS_STORAGE
ff383220 AB	62
	63	/* Networking Configs */
	64	#define CONFIG_FEC_MXC
	65	#define CONFIG_MII
	66	#define IMX_FEC_BASE ENET_BASE_ADDR
	67	#define CONFIG_FEC_XCV_TYPE RGMII
	68	#define CONFIG_ETHPRIME "FEC"
	69	#define CONFIG_FEC_MXC_PHYADDR 4
ff383220 AB	70	#define CONFIG_PHY_ATHEROS
	71
	72	/* Serial Flash */
	73	#ifdef CONFIG_CMD_SF
	74	#define CONFIG_MXC_SPI
	75	#define CONFIG_SF_DEFAULT_BUS 0
	76	#define CONFIG_SF_DEFAULT_CS 0
	77	#define CONFIG_SF_DEFAULT_SPEED 20000000
	78	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	79	#endif
	80
	81	/* allow to overwrite serial and ethaddr */
	82	#define CONFIG_ENV_OVERWRITE
	83	#define CONFIG_CONS_INDEX 1
ff383220	84
ff383220 AB	85	#define CONFIG_LOADADDR 0x12000000
	86	#define CONFIG_SYS_TEXT_BASE 0x17800000
	87
	88	#define CONFIG_EXTRA_ENV_SETTINGS \
	89	"script=boot.scr\0" \
	90	"image=" CONFIG_BOOT_DIR "/uImage\0" \
	91	"uboot=u-boot.imx\0" \
	92	"fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
	93	"fdt_addr=0x18000000\0" \
	94	"boot_fdt=yes\0" \
	95	"ip_dyn=yes\0" \
12ca05a3	96	"console=" CONSOLE_DEV "\0" \
ff383220 AB	97	"fdt_high=0xffffffff\0" \
	98	"initrd_high=0xffffffff\0" \
	99	"sddev=0\0" \
	100	"emmcdev=1\0" \
	101	"partnum=1\0" \
	102	"loadcmd=" CONFIG_LOADCMD "\0" \
	103	"rfspart=" CONFIG_RFSPART "\0" \
	104	"update_sd_firmware=" \
	105	"if test ${ip_dyn} = yes; then " \
	106	"setenv get_cmd dhcp; " \
	107	"else " \
	108	"setenv get_cmd tftp; " \
	109	"fi; " \
	110	"if mmc dev ${mmcdev}; then " \
	111	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	112	"setexpr fw_sz ${filesize} / 0x200; " \
	113	"setexpr fw_sz ${fw_sz} + 1; " \
	114	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	115	"fi; " \
	116	"fi\0" \
	117	"update_sf_uboot=" \
	118	"if tftp $loadaddr $uboot; then " \
	119	"sf probe; " \
	120	"sf erase 0 0xC0000; " \
	121	"sf write $loadaddr 0x400 $filesize; " \
	122	"echo 'U-Boot upgraded. Please reset'; " \
	123	"fi\0" \
	124	"setargs=setenv bootargs console=${console},${baudrate} " \
	125	"root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
	126	"loadbootscript=" \
	127	"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	128	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
	129	" source\0" \
	130	"loadimage=" \
	131	"${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	132	"loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	133	"tryboot=" \
	134	"if run loadbootscript; then " \
	135	"run bootscript; " \
	136	"else " \
	137	"if run loadimage; then " \
	138	"run doboot; " \
	139	"fi; " \
	140	"fi;\0" \
	141	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
	142	"run setargs; " \
	143	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	144	"if run loadfdt; then " \
	145	"bootm ${loadaddr} - ${fdt_addr}; " \
	146	"else " \
	147	"if test ${boot_fdt} = try; then " \
	148	"bootm; " \
	149	"else " \
	150	"echo WARN: Cannot load the DT; " \
	151	"fi; " \
	152	"fi; " \
	153	"else " \
	154	"bootm; " \
	155	"fi;\0" \
	156	"netargs=setenv bootargs console=${console},${baudrate} " \
	157	"root=/dev/nfs " \
	158	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	159	"netboot=echo Booting from net ...; " \
	160	"run netargs; " \
161	"if test ${ip_dyn} = yes; then " \
162	"setenv get_cmd dhcp; " \
163	"else " \
164	"setenv get_cmd tftp; " \
165	"fi; " \
166	"${get_cmd} ${image}; " \
167	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
168	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
169	"bootm ${loadaddr} - ${fdt_addr}; " \
170	"else " \
171	"if test ${boot_fdt} = try; then " \
172	"bootm; " \
173	"else " \
174	"echo WARN: Cannot load the DT; " \
175	"fi; " \
176	"fi; " \
177	"else " \
178	"bootm; " \
179	"fi;\0" \
180
181	#define CONFIG_BOOTCOMMAND \
182	"usb start; " \
183	"setenv dev usb; " \
184	"setenv devnum 0; " \
185	"setenv rootdev sda${rfspart}; " \
186	"run tryboot; " \
187	\
188	"setenv dev mmc; " \
189	"setenv rootdev mmcblk0p${rfspart}; " \
190	\
191	"setenv devnum ${sddev}; " \
192	"if mmc dev ${devnum}; then " \
193	"run tryboot; " \
194	"fi; " \
195	\
196	"setenv devnum ${emmcdev}; " \
197	"setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
198	"if mmc dev ${devnum}; then " \
199	"run tryboot; " \
200	"fi; " \
201	\
202	"bmode usb; " \
203
204	#define CONFIG_ARP_TIMEOUT 200UL
205
206	/* Miscellaneous configurable options */
207	#define CONFIG_SYS_LONGHELP
208	#define CONFIG_AUTO_COMPLETE
209
ff383220 AB	210	#define CONFIG_SYS_MEMTEST_START 0x10000000
	211	#define CONFIG_SYS_MEMTEST_END 0x10010000
	212	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	213
	214	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	215
	216	#define CONFIG_CMDLINE_EDITING
ff383220 AB	217
	218	/* Physical Memory Map */
	219	#define CONFIG_NR_DRAM_BANKS 1
	220	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	221
	222	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	223	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	224	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	225
	226	#define CONFIG_SYS_INIT_SP_OFFSET \
	227	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	228	#define CONFIG_SYS_INIT_SP_ADDR \
	229	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	230
	231	/* FLASH and environment organization */
ff383220	232
ff383220 AB	233	#define CONFIG_ENV_SIZE (8 * 1024)
	234	#define CONFIG_ENV_OFFSET (768 * 1024)
	235	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	236	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	237	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	238	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	239	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	240
	241	#ifndef CONFIG_SYS_DCACHE_OFF
	242	#endif
	243
	244	#define CONFIG_SYS_FSL_USDHC_NUM 3
	245
	246	/* Framebuffer */
f6f7e73d	247	#ifdef CONFIG_VIDEO
ff383220	248	#define CONFIG_VIDEO_IPUV3
ff383220 AB	249	#define CONFIG_VIDEO_BMP_RLE8
	250	#define CONFIG_SPLASH_SCREEN
	251	#define CONFIG_SPLASH_SCREEN_ALIGN
	252	#define CONFIG_BMP_16BPP
	253	#define CONFIG_VIDEO_LOGO
	254	#define CONFIG_VIDEO_BMP_LOGO
ff383220 AB	255	#define CONFIG_IMX_HDMI
ff383220 AB	256	#define CONFIG_IMX_VIDEO_SKIP
f6f7e73d	257	#endif
ff383220 AB	258
	259	#define CONFIG_PWM_IMX
	260	#define CONFIG_IMX6_PWM_PER_CLK 66000000
	261
ff383220	262	#ifdef CONFIG_CMD_PCI
ff383220 AB	263	#define CONFIG_PCI_SCAN_SHOW
	264	#define CONFIG_PCIE_IMX
	265	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
	266	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
	267	#endif
	268
	269	/* I2C Configs */
	270	#define CONFIG_SYS_I2C
	271	#define CONFIG_SYS_I2C_MXC
	272	#define CONFIG_SYS_I2C_SPEED 100000
	273	#define CONFIG_SYS_I2C_MXC_I2C1
	274	#define CONFIG_SYS_I2C_MXC_I2C2
	275	#define CONFIG_SYS_I2C_MXC_I2C3
	276
	277	#endif /* __ADVANTECH_DMSBA16_CONFIG_H */