[people/ms/u-boot.git] / include / configs / alpr.h

/*
 * (C) Copyright 2006-2008
 * Stefan Roese, DENX Software Engineering, sr@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*-----------------------------------------------------------------------
 * High Level Configuration Options
 *----------------------------------------------------------------------*/
#define CONFIG_ALPR		1	    /* Board is ebony		*/
#define CONFIG_440GX		1	    /* Specifc GX support	*/
#define CONFIG_440		1	    /* ... PPC440 family	*/
#define CONFIG_4xx		1	    /* ... PPC4xx family	*/
#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_pre_init	*/
#define CONFIG_LAST_STAGE_INIT	1	    /* call last_stage_init()	*/
#define CONFIG_SYS_CLK_FREQ	33333333    /* external freq to pll	*/
#define CONFIG_4xx_DCACHE		/* Enable i- and d-cache	*/

/*-----------------------------------------------------------------------
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 *----------------------------------------------------------------------*/
#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0			*/
#define CONFIG_SYS_FLASH_BASE		0xffe00000	/* start of FLASH		*/
#define CONFIG_SYS_MONITOR_BASE	0xfffc0000	/* start of monitor		*/
#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory		*/
#define	CONFIG_SYS_PCI_MEMSIZE		0x40000000	/* size of mapped pci memory	*/
#define CONFIG_SYS_PERIPHERAL_BASE	0xe0000000	/* internal peripherals		*/
#define CONFIG_SYS_ISRAM_BASE		0xc0000000	/* internal SRAM		*/
#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs		*/
#define CONFIG_SYS_PCI_MEMBASE1	CONFIG_SYS_PCI_MEMBASE  + 0x10000000
#define CONFIG_SYS_PCI_MEMBASE2	CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
#define CONFIG_SYS_PCI_MEMBASE3	CONFIG_SYS_PCI_MEMBASE2 + 0x10000000


#define CONFIG_SYS_FPGA_BASE	    (CONFIG_SYS_PERIPHERAL_BASE + 0x08300000)
#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)

/*-----------------------------------------------------------------------
 * Initial RAM & stack pointer (placed in internal SRAM)
 *----------------------------------------------------------------------*/
#define CONFIG_SYS_TEMP_STACK_OCM  1
#define CONFIG_SYS_OCM_DATA_ADDR   CONFIG_SYS_ISRAM_BASE
#define CONFIG_SYS_INIT_RAM_ADDR   CONFIG_SYS_ISRAM_BASE  /* Initial RAM address	*/
#define CONFIG_SYS_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
#define CONFIG_SYS_GBL_DATA_SIZE   128		    /* num bytes initial data	*/

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR

#define CONFIG_SYS_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
#define CONFIG_SYS_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/

/*-----------------------------------------------------------------------
 * Serial Port
 *----------------------------------------------------------------------*/
#undef	CONFIG_SYS_EXT_SERIAL_CLOCK
#define CONFIG_BAUDRATE		115200
#define	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/

#define CONFIG_SYS_BAUDRATE_TABLE  \
    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

/*-----------------------------------------------------------------------
 * FLASH related
 *----------------------------------------------------------------------*/
#define CONFIG_SYS_FLASH_CFI		1	/* The flash is CFI compatible		*/
#define CONFIG_FLASH_CFI_DRIVER	1	/* Use common CFI driver		*/
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/

#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/

#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/

/* Address and size of Redundant Environment Sector	*/
#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)

/*-----------------------------------------------------------------------
 * DDR SDRAM
 *----------------------------------------------------------------------*/
#undef CONFIG_SPD_EEPROM		/* Don't use SPD EEPROM for setup	*/
#define CONFIG_SDRAM_BANK0	1	/* init onboard DDR SDRAM bank 0	*/
#undef CONFIG_SDRAM_ECC			/* enable ECC support			*/
#define CONFIG_SYS_SDRAM_TABLE	{ \
		{(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \
		{(64 << 20),  12, 0x00082001}} /* 64MB mode 2, 12x9(4)	*/

/*-----------------------------------------------------------------------
 * I2C
 *----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
#define CONFIG_SYS_I2C_SLAVE		0x7F
#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs	*/

/*-----------------------------------------------------------------------
 * I2C EEPROM (PCF8594C)
 *----------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x54	/* EEPROM PCF8594C		*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
/* mask of address bits that overflow into the "EEPROM chip address"	*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3	/* The Philips PCF8594C has	*/
					/* 8 byte page write mode using */
					/* last 3 bits of the address	*/
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	40   /* and takes up to 40 msec */

#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \"run kernelx\" to boot the system;"			\
	"echo"

#undef	CONFIG_BOOTARGS

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth3\0"							\
	"hostname=alpr\0"						\
	"fdt_file=alpr/alpr.dtb\0"					\
	"fdt_addr=400000\0"						\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath} ${init}\0"		\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate} " \
		"mem=193M\0"						\
	"flash_nfs=run nfsargs addip addtty;"				\
		"bootm ${kernel_addr}\0"				\
	"flash_self=run ramargs addip addtty;"				\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
	        "bootm\0"						\
	"net_nfs_fdt=tftp 200000 ${bootfile};"				\
		"tftp ${fdt_addr} ${fdt_file};"				\
		"run nfsargs addip addtty;"				\
		"bootm 200000 - ${fdt_addr}\0"				\
	"rootpath=/opt/projects/alpr/nfs_root\0"			\
	"bootfile=/alpr/uImage\0"					\
	"kernel_addr=fff00000\0"					\
	"ramdisk_addr=fff10000\0"					\
	"load=tftp 100000 /alpr/u-boot/u-boot.bin\0"			\
	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
		"cp.b 100000 fffc0000 40000;"			        \
		"setenv filesize;saveenv\0"				\
	"upd=run load update\0"						\
	"ethprime=ppc_4xx_eth3\0"					\
	"ethact=ppc_4xx_eth3\0"						\
	"autoload=no\0"							\
	"ipconfig=dhcp;setenv serverip 11.0.0.152\0"			\
	"load_fpga=fpga load 0 ffe00000 10dd9a\0"			\
	"mtdargs=setenv bootargs root=/dev/mtdblock6 rw "		\
		"rootfstype=jffs2 init=/sbin/init\0"			\
	"kernel1_mtd=nand read 200000 0 200000;run mtdargs addip addtty"\
		";bootm 200000\0"					\
	"kernel2_mtd=nand read 200000 200000 200000;run mtdargs addip "	\
		"addtty;bootm 200000\0"					\
	"kernel1=setenv actkernel 'kernel1';run load_fpga "		\
		"kernel1_mtd\0"						\
	"kernel2=setenv actkernel 'kernel2';run load_fpga "		\
		"kernel2_mtd\0"						\
	""

#define CONFIG_BOOTCOMMAND	"run kernel2"

#define CONFIG_BOOTDELAY	2	/* autoboot after 5 seconds	*/

#define CONFIG_BAUDRATE		115200

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_NET_MULTI	1
#define CONFIG_PHY_ADDR		0x02	/* dummy setting, no EMAC0 used	*/
#define CONFIG_PHY1_ADDR	0x03	/* dummy setting, no EMAC1 used	*/
#define CONFIG_PHY2_ADDR	0x01	/* PHY address for EMAC2	*/
#define CONFIG_PHY3_ADDR	0x02	/* PHY address for EMAC3	*/
#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_HAS_ETH2
#define CONFIG_HAS_ETH3
#define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
#define CONFIG_M88E1111_PHY	1	/* needed for PHY specific setup*/
#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
#define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */

#define CONFIG_NETCONSOLE		/* include NetConsole support	*/


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FPGA
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO


#undef CONFIG_WATCHDOG			/* watchdog disabled		*/

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_ALT_MEMTEST		1	/* Enable more extensive memtest*/
#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */

#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */

#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
#define CONFIG_LOOPW            1       /* enable loopw command         */
#define CONFIG_MX_CYCLIC	1       /* enable mdc/mwc commands      */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE	1	/* include version env variable */

#define CONFIG_SYS_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/

/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
/* General PCI */
#define CONFIG_PCI			/* include pci support		*/
#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
#define CONFIG_SYS_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
#define CONFIG_PCI_BOOTDELAY	1       /* enable pci bootdelay variable*/

/* Board-specific PCI */
#define CONFIG_SYS_PCI_TARGET_INIT		/* let board init pci target    */
#define CONFIG_SYS_PCI_MASTER_INIT

#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */

/*-----------------------------------------------------------------------
 * FPGA stuff
 *-----------------------------------------------------------------------*/
#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_CYCLON2
#define CONFIG_SYS_FPGA_CHECK_CTRLC
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
#define CONFIG_FPGA_COUNT       1		/* Ich habe 2 ... aber in
					Reihe geschaltet -> sollte gehen,
					aufpassen mit Datasize ist jetzt
					halt doppelt so gross ... Seite 306
					ist das mit den multiple Device in PS
					Mode erklaert ...*/

/* FPGA program pin configuration */
#define CONFIG_SYS_GPIO_CLK		18	/* FPGA clk pin (cpu output)		*/
#define CONFIG_SYS_GPIO_DATA		19	/* FPGA data pin (cpu output)		*/
#define CONFIG_SYS_GPIO_STATUS		20	/* FPGA status pin (cpu input)		*/
#define CONFIG_SYS_GPIO_CONFIG		21	/* FPGA CONFIG pin (cpu output)		*/
#define CONFIG_SYS_GPIO_CON_DON	22	/* FPGA CONFIG_DONE pin (cpu input)	*/

#define CONFIG_SYS_GPIO_SEL_DPR	14	/* cpu output */
#define CONFIG_SYS_GPIO_SEL_AVR	15	/* cpu output */
#define CONFIG_SYS_GPIO_PROG_EN	23	/* cpu output */

/*-----------------------------------------------------------------------
 * Definitions for GPIO setup
 *-----------------------------------------------------------------------*/
#define CONFIG_SYS_GPIO_SHUTDOWN	(0x80000000 >> 6)
#define CONFIG_SYS_GPIO_SSD_EMPTY	(0x80000000 >> 9)
#define CONFIG_SYS_GPIO_EREADY		(0x80000000 >> 26)
#define CONFIG_SYS_GPIO_REV0		(0x80000000 >> 14)
#define CONFIG_SYS_GPIO_REV1		(0x80000000 >> 15)

/*-----------------------------------------------------------------------
 * NAND-FLASH stuff
 *-----------------------------------------------------------------------*/
#define CONFIG_SYS_MAX_NAND_DEVICE	4
#define NAND_MAX_CHIPS		CONFIG_SYS_MAX_NAND_DEVICE
#define CONFIG_SYS_NAND_BASE		0xF0000000	/* NAND FLASH Base Address	*/
#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE + 0, CONFIG_SYS_NAND_BASE + 2,	\
				  CONFIG_SYS_NAND_BASE + 4, CONFIG_SYS_NAND_BASE + 6 }
#define CONFIG_SYS_NAND_QUIET_TEST	1	/* don't warn upon unknown NAND flash	*/

/*-----------------------------------------------------------------------
 * External Bus Controller (EBC) Setup
 *----------------------------------------------------------------------*/
#define CONFIG_SYS_FLASH		CONFIG_SYS_FLASH_BASE

/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
#define CONFIG_SYS_EBC_PB0AP		0x92015480
#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */

/* Memory Bank 1 (NAND-FLASH) initialization					*/
#define CONFIG_SYS_EBC_PB1AP		0x01840380	/* TWT=3			*/
#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_NAND_BASE | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT	1
#define CONFIG_OF_BOARD_SETUP	1

#endif	/* __CONFIG_H */
Commit	Line	Data
899620c2	1	/*
9462732a	2	* (C) Copyright 2006-2008
899620c2 SR	3	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	#ifndef __CONFIG_H
	25	#define __CONFIG_H
	26
	27	/*-----------------------------------------------------------------------
	28	* High Level Configuration Options
	29	----------------------------------------------------------------------/
	30	#define CONFIG_ALPR 1 /* Board is ebony */
	31	#define CONFIG_440GX 1 /* Specifc GX support */
efa35cf1	32	#define CONFIG_440 1 /* ... PPC440 family */
899620c2 SR	33	#define CONFIG_4xx 1 /* ... PPC4xx family */
899620c2 SR	34	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
1c2ce226	35	#define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */
1c2ce226	36	#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
511e4f9e	37	#define CONFIG_4xx_DCACHE /* Enable i- and d-cache */
899620c2 SR	38
	39	/*-----------------------------------------------------------------------
	40	* Base addresses -- Note these are effective addresses where the
	41	* actual resources get mapped (not physical addresses)
	42	----------------------------------------------------------------------/
6d0f6bcf JCPV	43	#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
	44	#define CONFIG_SYS_FLASH_BASE 0xffe00000 /* start of FLASH */
	45	#define CONFIG_SYS_MONITOR_BASE 0xfffc0000 /* start of monitor */
	46	#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
	47	#define CONFIG_SYS_PCI_MEMSIZE 0x40000000 /* size of mapped pci memory */
	48	#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
	49	#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
	50	#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
	51	#define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000
	52	#define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
	53	#define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
	54
	55
	56	#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08300000)
	57	#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
899620c2 SR	58
	59	/*-----------------------------------------------------------------------
	60	* Initial RAM & stack pointer (placed in internal SRAM)
	61	----------------------------------------------------------------------/
6d0f6bcf JCPV	62	#define CONFIG_SYS_TEMP_STACK_OCM 1
	63	#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
	64	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
	65	#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
	66	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
899620c2	67
6d0f6bcf JCPV	68	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	69	#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
	70	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
899620c2	71
6d0f6bcf JCPV	72	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
6d0f6bcf JCPV	73	#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
899620c2 SR	74
	75	/*-----------------------------------------------------------------------
	76	* Serial Port
	77	----------------------------------------------------------------------/
6d0f6bcf	78	#undef CONFIG_SYS_EXT_SERIAL_CLOCK
899620c2 SR	79	#define CONFIG_BAUDRATE 115200
	80	#define CONFIG_UART1_CONSOLE /* define for uart1 as console */
	81
6d0f6bcf	82	#define CONFIG_SYS_BAUDRATE_TABLE \
899620c2 SR	83	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
899620c2 SR	84
899620c2 SR	85	/*-----------------------------------------------------------------------
	86	* FLASH related
	87	----------------------------------------------------------------------/
6d0f6bcf	88	#define CONFIG_SYS_FLASH_CFI 1 /* The flash is CFI compatible */
00b1883a	89	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use common CFI driver */
6d0f6bcf JCPV	90	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	91	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
	92	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
	93	#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
	94	#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
899620c2	95
5a1aceb0	96	#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
899620c2	97
0e8d1586	98	#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
6d0f6bcf	99	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
0e8d1586	100	#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
899620c2 SR	101
899620c2 SR	102	/* Address and size of Redundant Environment Sector */
0e8d1586 JCPV	103	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
0e8d1586 JCPV	104	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
899620c2 SR	105
	106	/*-----------------------------------------------------------------------
	107	* DDR SDRAM
	108	----------------------------------------------------------------------/
	109	#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
	110	#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0 */
	111	#undef CONFIG_SDRAM_ECC /* enable ECC support */
6d0f6bcf	112	#define CONFIG_SYS_SDRAM_TABLE { \
899620c2 SR	113	{(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \
	114	{(64 << 20), 12, 0x00082001}} /* 64MB mode 2, 12x9(4) */
	115
	116	/*-----------------------------------------------------------------------
	117	* I2C
	118	----------------------------------------------------------------------/
	119	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
	120	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
6d0f6bcf JCPV	121	#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
	122	#define CONFIG_SYS_I2C_SLAVE 0x7F
	123	#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
899620c2 SR	124
	125	/*-----------------------------------------------------------------------
	126	* I2C EEPROM (PCF8594C)
	127	----------------------------------------------------------------------/
6d0f6bcf JCPV	128	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 /* EEPROM PCF8594C */
6d0f6bcf JCPV	129	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
899620c2	130	/* mask of address bits that overflow into the "EEPROM chip address" */
6d0f6bcf JCPV	131	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
6d0f6bcf JCPV	132	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* The Philips PCF8594C has */
899620c2 SR	133	/* 8 byte page write mode using */
899620c2 SR	134	/* last 3 bits of the address */
6d0f6bcf	135	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 40 /* and takes up to 40 msec */
899620c2 SR	136
899620c2 SR	137	#define CONFIG_PREBOOT "echo;" \
6304430e	138	"echo Type \"run kernelx\" to boot the system;" \
899620c2 SR	139	"echo"
	140
	141	#undef CONFIG_BOOTARGS
	142
	143	#define CONFIG_EXTRA_ENV_SETTINGS \
1c2ce226	144	"netdev=eth3\0" \
899620c2	145	"hostname=alpr\0" \
9462732a SR	146	"fdt_file=alpr/alpr.dtb\0" \
9462732a SR	147	"fdt_addr=400000\0" \
899620c2	148	"nfsargs=setenv bootargs root=/dev/nfs rw " \
6304430e	149	"nfsroot=${serverip}:${rootpath} ${init}\0" \
899620c2 SR	150	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	151	"addip=setenv bootargs ${bootargs} " \
	152	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	153	":${hostname}:${netdev}:off panic=1\0" \
1c2ce226 SR	154	"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate} " \
1c2ce226 SR	155	"mem=193M\0" \
899620c2 SR	156	"flash_nfs=run nfsargs addip addtty;" \
	157	"bootm ${kernel_addr}\0" \
	158	"flash_self=run ramargs addip addtty;" \
	159	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	160	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
	161	"bootm\0" \
9462732a SR	162	"net_nfs_fdt=tftp 200000 ${bootfile};" \
	163	"tftp ${fdt_addr} ${fdt_file};" \
	164	"run nfsargs addip addtty;" \
	165	"bootm 200000 - ${fdt_addr}\0" \
1c2ce226 SR	166	"rootpath=/opt/projects/alpr/nfs_root\0" \
1c2ce226 SR	167	"bootfile=/alpr/uImage\0" \
899620c2 SR	168	"kernel_addr=fff00000\0" \
899620c2 SR	169	"ramdisk_addr=fff10000\0" \
1c2ce226	170	"load=tftp 100000 /alpr/u-boot/u-boot.bin\0" \
899620c2 SR	171	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
	172	"cp.b 100000 fffc0000 40000;" \
	173	"setenv filesize;saveenv\0" \
d8ab58b2	174	"upd=run load update\0" \
f16c1da9 SR	175	"ethprime=ppc_4xx_eth3\0" \
	176	"ethact=ppc_4xx_eth3\0" \
	177	"autoload=no\0" \
	178	"ipconfig=dhcp;setenv serverip 11.0.0.152\0" \
f16c1da9 SR	179	"load_fpga=fpga load 0 ffe00000 10dd9a\0" \
	180	"mtdargs=setenv bootargs root=/dev/mtdblock6 rw " \
	181	"rootfstype=jffs2 init=/sbin/init\0" \
	182	"kernel1_mtd=nand read 200000 0 200000;run mtdargs addip addtty"\
	183	";bootm 200000\0" \
	184	"kernel2_mtd=nand read 200000 200000 200000;run mtdargs addip " \
	185	"addtty;bootm 200000\0" \
6304430e SR	186	"kernel1=setenv actkernel 'kernel1';run load_fpga " \
	187	"kernel1_mtd\0" \
	188	"kernel2=setenv actkernel 'kernel2';run load_fpga " \
	189	"kernel2_mtd\0" \
899620c2	190	""
f16c1da9 SR	191
f16c1da9 SR	192	#define CONFIG_BOOTCOMMAND "run kernel2"
899620c2	193
1c2ce226	194	#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */
899620c2 SR	195
	196	#define CONFIG_BAUDRATE 115200
	197
	198	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	199	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
899620c2 SR	200
	201	#define CONFIG_MII 1 /* MII PHY management */
	202	#define CONFIG_NET_MULTI 1
	203	#define CONFIG_PHY_ADDR 0x02 /* dummy setting, no EMAC0 used */
	204	#define CONFIG_PHY1_ADDR 0x03 /* dummy setting, no EMAC1 used */
1c2ce226 SR	205	#define CONFIG_PHY2_ADDR 0x01 /* PHY address for EMAC2 */
1c2ce226 SR	206	#define CONFIG_PHY3_ADDR 0x02 /* PHY address for EMAC3 */
899620c2 SR	207	#define CONFIG_HAS_ETH0
	208	#define CONFIG_HAS_ETH1
	209	#define CONFIG_HAS_ETH2
	210	#define CONFIG_HAS_ETH3
	211	#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
ec0c2ec7	212	#define CONFIG_M88E1111_PHY 1 /* needed for PHY specific setup*/
899620c2	213	#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
6d0f6bcf	214	#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
5bc528fa SR	215
5bc528fa SR	216	#define CONFIG_NETCONSOLE /* include NetConsole support */
899620c2	217
0b361c91	218
80ff4f99 JL	219	/*
	220	* BOOTP options
	221	*/
	222	#define CONFIG_BOOTP_BOOTFILESIZE
	223	#define CONFIG_BOOTP_BOOTPATH
	224	#define CONFIG_BOOTP_GATEWAY
	225	#define CONFIG_BOOTP_HOSTNAME
	226
	227
0b361c91 JL	228	/*
	229	* Command line configuration.
	230	*/
	231	#include <config_cmd_default.h>
	232
	233	#define CONFIG_CMD_ASKENV
	234	#define CONFIG_CMD_DHCP
	235	#define CONFIG_CMD_DIAG
	236	#define CONFIG_CMD_EEPROM
	237	#define CONFIG_CMD_ELF
	238	#define CONFIG_CMD_FPGA
	239	#define CONFIG_CMD_I2C
	240	#define CONFIG_CMD_IRQ
	241	#define CONFIG_CMD_MII
	242	#define CONFIG_CMD_NAND
	243	#define CONFIG_CMD_NET
	244	#define CONFIG_CMD_NFS
	245	#define CONFIG_CMD_PCI
	246	#define CONFIG_CMD_PING
	247	#define CONFIG_CMD_REGINFO
	248
899620c2 SR	249
	250	#undef CONFIG_WATCHDOG /* watchdog disabled */
	251
	252	/*
	253	* Miscellaneous configurable options
	254	*/
6d0f6bcf JCPV	255	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	256	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
0b361c91	257	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	258	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
899620c2	259	#else
6d0f6bcf	260	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
899620c2	261	#endif
6d0f6bcf JCPV	262	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	263	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	264	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
899620c2	265
6d0f6bcf JCPV	266	#define CONFIG_SYS_ALT_MEMTEST 1 /* Enable more extensive memtest*/
	267	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
	268	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
899620c2	269
6d0f6bcf JCPV	270	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	271	#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
899620c2	272
6d0f6bcf	273	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
899620c2	274
5bc528fa	275	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
899620c2	276	#define CONFIG_LOOPW 1 /* enable loopw command */
1636d1c8	277	#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
899620c2	278	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
1c2ce226 SR	279	#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
1c2ce226 SR	280
6d0f6bcf	281	#define CONFIG_SYS_4xx_RESET_TYPE 0x2 /* use chip reset on this board */
899620c2	282
899620c2 SR	283	/*-----------------------------------------------------------------------
	284	* PCI stuff
	285	*-----------------------------------------------------------------------
	286	*/
	287	/* General PCI */
	288	#define CONFIG_PCI /* include pci support */
	289	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	290	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
6d0f6bcf	291	#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
1c2ce226	292	#define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/
899620c2 SR	293
899620c2 SR	294	/* Board-specific PCI */
6d0f6bcf JCPV	295	#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */
6d0f6bcf JCPV	296	#define CONFIG_SYS_PCI_MASTER_INIT
899620c2	297
6d0f6bcf JCPV	298	#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
6d0f6bcf JCPV	299	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
899620c2 SR	300
	301	/*-----------------------------------------------------------------------
	302	* FPGA stuff
1c2ce226	303	-----------------------------------------------------------------------/
0133502e MF	304	#define CONFIG_FPGA
	305	#define CONFIG_FPGA_ALTERA
	306	#define CONFIG_FPGA_CYCLON2
6d0f6bcf JCPV	307	#define CONFIG_SYS_FPGA_CHECK_CTRLC
6d0f6bcf JCPV	308	#define CONFIG_SYS_FPGA_PROG_FEEDBACK
899620c2 SR	309	#define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in
	310	Reihe geschaltet -> sollte gehen,
	311	aufpassen mit Datasize ist jetzt
	312	halt doppelt so gross ... Seite 306
	313	ist das mit den multiple Device in PS
	314	Mode erklaert ...*/
	315
899620c2	316	/* FPGA program pin configuration */
6d0f6bcf JCPV	317	#define CONFIG_SYS_GPIO_CLK 18 /* FPGA clk pin (cpu output) */
	318	#define CONFIG_SYS_GPIO_DATA 19 /* FPGA data pin (cpu output) */
	319	#define CONFIG_SYS_GPIO_STATUS 20 /* FPGA status pin (cpu input) */
	320	#define CONFIG_SYS_GPIO_CONFIG 21 /* FPGA CONFIG pin (cpu output) */
	321	#define CONFIG_SYS_GPIO_CON_DON 22 /* FPGA CONFIG_DONE pin (cpu input) */
899620c2	322
6d0f6bcf JCPV	323	#define CONFIG_SYS_GPIO_SEL_DPR 14 /* cpu output */
	324	#define CONFIG_SYS_GPIO_SEL_AVR 15 /* cpu output */
	325	#define CONFIG_SYS_GPIO_PROG_EN 23 /* cpu output */
899620c2	326
1c2ce226 SR	327	/*-----------------------------------------------------------------------
	328	* Definitions for GPIO setup
	329	-----------------------------------------------------------------------/
6d0f6bcf JCPV	330	#define CONFIG_SYS_GPIO_SHUTDOWN (0x80000000 >> 6)
	331	#define CONFIG_SYS_GPIO_SSD_EMPTY (0x80000000 >> 9)
	332	#define CONFIG_SYS_GPIO_EREADY (0x80000000 >> 26)
	333	#define CONFIG_SYS_GPIO_REV0 (0x80000000 >> 14)
	334	#define CONFIG_SYS_GPIO_REV1 (0x80000000 >> 15)
1c2ce226 SR	335
1c2ce226 SR	336	/*-----------------------------------------------------------------------
899620c2	337	* NAND-FLASH stuff
1c2ce226	338	-----------------------------------------------------------------------/
6d0f6bcf JCPV	339	#define CONFIG_SYS_MAX_NAND_DEVICE 4
	340	#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
	341	#define CONFIG_SYS_NAND_BASE 0xF0000000 /* NAND FLASH Base Address */
	342	#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE + 0, CONFIG_SYS_NAND_BASE + 2, \
	343	CONFIG_SYS_NAND_BASE + 4, CONFIG_SYS_NAND_BASE + 6 }
	344	#define CONFIG_SYS_NAND_QUIET_TEST 1 /* don't warn upon unknown NAND flash */
899620c2 SR	345
	346	/*-----------------------------------------------------------------------
	347	* External Bus Controller (EBC) Setup
	348	----------------------------------------------------------------------/
6d0f6bcf	349	#define CONFIG_SYS_FLASH CONFIG_SYS_FLASH_BASE
899620c2 SR	350
899620c2 SR	351	/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
6d0f6bcf JCPV	352	#define CONFIG_SYS_EBC_PB0AP 0x92015480
6d0f6bcf JCPV	353	#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH \| 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */
5bc528fa SR	354
5bc528fa SR	355	/* Memory Bank 1 (NAND-FLASH) initialization */
6d0f6bcf JCPV	356	#define CONFIG_SYS_EBC_PB1AP 0x01840380 /* TWT=3 */
6d0f6bcf JCPV	357	#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_NAND_BASE \| 0x18000) /* BS=1MB,BU=R/W,BW=8bit */
899620c2 SR	358
	359	/*
	360	* For booting Linux, the board info and command line data
	361	* have to be in the first 8 MB of memory, since this is
	362	* the maximum mapped by the Linux kernel during initialization.
	363	*/
6d0f6bcf	364	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
899620c2 SR	365
	366	/*
	367	* Internal Definitions
	368	*
	369	* Boot Flags
	370	*/
	371	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	372	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	373
0b361c91	374	#if defined(CONFIG_CMD_KGDB)
899620c2 SR	375	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	376	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	377	#endif
9462732a SR	378
	379	/* pass open firmware flat tree */
	380	#define CONFIG_OF_LIBFDT 1
	381	#define CONFIG_OF_BOARD_SETUP 1
	382
899620c2	383	#endif /* __CONFIG_H */