[people/ms/u-boot.git] / include / configs / apalis_imx6.h

/*
 * Copyright 2013-2015 Toradex, Inc.
 *
 * Configuration settings for the Toradex Apalis iMX6
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"

#undef CONFIG_DISPLAY_BOARDINFO
#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */

#define CONFIG_MACH_TYPE		4886

#define CONFIG_SYS_GENERIC_BOARD

#include <asm/arch/imx-regs.h>
#include <asm/mach-imx/gpio.h>

#ifdef CONFIG_SPL
#include "imx6_spl.h"
#endif

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SERIAL_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(32 * 1024 * 1024)

#define CONFIG_MISC_INIT_R

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART1_BASE

/* Make the HW version stuff available in U-Boot env */
#define CONFIG_VERSION_VARIABLE		/* ver environment variable */
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000

/* OCOTP Configs */
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	3

#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
#define CONFIG_BOUNCE_BUFFER

/*
 * SATA Configs
 */
#ifdef CONFIG_CMD_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#endif

/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		6
#define CONFIG_IP_DEFRAG
#define CONFIG_TFTP_BLOCKSIZE		4096
#define CONFIG_TFTP_TSIZE

/* USB Configs */
/* Host */
#define CONFIG_USB_MAX_CONTROLLER_COUNT		2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
/* Client */
#define CONFIG_USBD_HS

#define CONFIG_USB_GADGET_MASS_STORAGE
/* USB DFU */
#define CONFIG_DFU_MMC

/* Miscellaneous commands */

/* Framebuffer and LCD */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX		1

/* Command definition */
#undef CONFIG_CMD_LOADB
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_FLASH

#undef CONFIG_IPADDR
#define CONFIG_IPADDR			192.168.10.2
#define CONFIG_NETMASK			255.255.255.0
#undef CONFIG_SERVERIP
#define CONFIG_SERVERIP			192.168.10.1

#define CONFIG_LOADADDR			0x12000000
#define CONFIG_SYS_TEXT_BASE		0x17800000

#ifdef CONFIG_CMD_SATA
#define CONFIG_DRIVE_SATA "sata "
#else
#define CONFIG_DRIVE_SATA
#endif

#ifdef CONFIG_CMD_MMC
#define CONFIG_DRIVE_MMC "mmc "
#else
#define CONFIG_DRIVE_MMC
#endif

#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC

#define DFU_ALT_EMMC_INFO \
	"u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
	"boot part 0 1;" \
	"rootfs part 0 2;" \
	"uImage fat 0 1;" \
	"imx6q-colibri-eval-v3.dtb fat 0 1;" \
	"imx6q-colibri-cam-eval-v3.dtb fat 0 1"

#define EMMC_BOOTCMD \
	"emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
		"rootwait\0" \
	"emmcboot=run setup; " \
		"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
		"${vidargs}; echo Booting from internal eMMC chip...; "	\
		"run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
		"${boot_file} && run fdt_fixup && " \
		"bootm ${kernel_addr_r} ${dtbparam}\0" \
	"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
		"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"

#define MEM_LAYOUT_ENV_SETTINGS \
	"bootm_size=0x20000000\0" \
	"fdt_addr_r=0x12000000\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"kernel_addr_r=0x11000000\0" \
	"ramdisk_addr_r=0x12100000\0"

#define NFS_BOOTCMD \
	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
	"nfsboot=run setup; " \
		"setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
		"${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
		"run nfsdtbload; dhcp ${kernel_addr_r} " \
		"&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
	"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
		"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"

#define SD_BOOTCMD						\
	"sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
		"rootwait\0" \
	"sdboot=run setup; " \
		"setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
		"${vidargs}; echo Booting from SD card; " \
		"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
		"${boot_file} && run fdt_fixup && " \
		"bootm ${kernel_addr_r} ${dtbparam}\0" \
	"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
		"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"

#define USB_BOOTCMD \
	"usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
		"rootwait\0" \
	"usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
		"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
		"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
		"${boot_file} && run fdt_fixup && " \
		"bootm ${kernel_addr_r} ${dtbparam}\0" \
	"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
		"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"

#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
#define FDT_FILE "imx6q-apalis-eval.dtb"
#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
#else
#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
		"run nfsboot ; echo ; echo nfsboot failed ; " \
		"usb start ;" \
		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
	"boot_file=uImage\0" \
	"console=ttymxc0\0" \
	"defargs=enable_wait_mode=off vmalloc=400M\0" \
	"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
	EMMC_BOOTCMD \
	"fdt_file=" FDT_FILE "\0" \
	"fdt_fixup=;\0" \
	MEM_LAYOUT_ENV_SETTINGS \
	NFS_BOOTCMD \
	SD_BOOTCMD \
	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
		"flash_eth.img && source ${loadaddr}\0" \
	"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
		"${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
		"source ${loadaddr}\0" \
	"setup=setenv setupargs fec_mac=${ethaddr} " \
		"consoleblank=0 no_console_suspend=1 console=tty1 " \
		"console=${console},${baudrate}n8\0 " \
	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
	"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
		"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
		"source ${loadaddr}\0" \
	"splashpos=m,m\0" \
	"vidargs=mxc_hdmi.only_cea=1 " \
		"video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
		"video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
		"fbmem=32M\0 "

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE
#undef CONFIG_SYS_CBSIZE
#define CONFIG_SYS_CBSIZE		1024
#undef CONFIG_SYS_MAXARGS
#define CONFIG_SYS_MAXARGS		48

#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* environment organization */

#define CONFIG_ENV_SIZE			(8 * 1024)

#if defined(CONFIG_ENV_IS_IN_MMC)
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
					 CONFIG_TDX_CFG_BLOCK_OFFSET)
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_SYS_MMC_ENV_PART		1
#endif

#define CONFIG_OF_SYSTEM_SETUP

#define CONFIG_CMD_TIME

#define CONFIG_SUPPORT_RAW_INITRD

#endif	/* __CONFIG_H */
Commit	Line	Data
592f4aed MK	1	/*
	2	* Copyright 2013-2015 Toradex, Inc.
	3	*
	4	* Configuration settings for the Toradex Apalis iMX6
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	#include "mx6_common.h"
592f4aed MK	13
	14	#undef CONFIG_DISPLAY_BOARDINFO
	15	#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
	16
	17	#define CONFIG_MACH_TYPE 4886
	18
	19	#define CONFIG_SYS_GENERIC_BOARD
	20
	21	#include <asm/arch/imx-regs.h>
552a848e	22	#include <asm/mach-imx/gpio.h>
592f4aed MK	23
	24	#ifdef CONFIG_SPL
	25	#include "imx6_spl.h"
592f4aed MK	26	#endif
	27
	28	#define CONFIG_CMDLINE_TAG
	29	#define CONFIG_SETUP_MEMORY_TAGS
	30	#define CONFIG_INITRD_TAG
	31	#define CONFIG_REVISION_TAG
	32	#define CONFIG_SERIAL_TAG
	33
	34	/* Size of malloc() pool */
	35	#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
	36
592f4aed MK	37	#define CONFIG_MISC_INIT_R
	38
	39	#define CONFIG_MXC_UART
	40	#define CONFIG_MXC_UART_BASE UART1_BASE
	41
	42	/* Make the HW version stuff available in U-Boot env */
	43	#define CONFIG_VERSION_VARIABLE /* ver environment variable */
	44	#define CONFIG_ENV_VARS_UBOOT_CONFIG
	45	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	46
	47	/* I2C Configs */
	48	#define CONFIG_SYS_I2C
	49	#define CONFIG_SYS_I2C_MXC
	50	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	51	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	52	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	53	#define CONFIG_SYS_I2C_SPEED 100000
	54
	55	/* OCOTP Configs */
592f4aed MK	56	#ifdef CONFIG_CMD_FUSE
	57	#define CONFIG_MXC_OCOTP
	58	#endif
	59
	60	/* MMC Configs */
	61	#define CONFIG_FSL_ESDHC
	62	#define CONFIG_FSL_USDHC
	63	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	64	#define CONFIG_SYS_FSL_USDHC_NUM 3
	65
	66	#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
592f4aed	67	#define CONFIG_BOUNCE_BUFFER
592f4aed	68
592f4aed MK	69	/*
	70	* SATA Configs
	71	*/
	72	#ifdef CONFIG_CMD_SATA
592f4aed MK	73	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	74	#define CONFIG_DWC_AHSATA_PORT_ID 0
	75	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	76	#define CONFIG_LBA48
592f4aed MK	77	#endif
	78
	79	/* Network */
	80	#define CONFIG_FEC_MXC
	81	#define CONFIG_MII
	82	#define IMX_FEC_BASE ENET_BASE_ADDR
	83	#define CONFIG_FEC_XCV_TYPE RGMII
	84	#define CONFIG_ETHPRIME "FEC"
	85	#define CONFIG_FEC_MXC_PHYADDR 6
592f4aed MK	86	#define CONFIG_IP_DEFRAG
	87	#define CONFIG_TFTP_BLOCKSIZE 4096
	88	#define CONFIG_TFTP_TSIZE
	89
	90	/* USB Configs */
	91	/* Host */
592f4aed MK	92	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	93	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	94	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	95	#define CONFIG_MXC_USB_FLAGS 0
592f4aed	96	/* Client */
592f4aed MK	97	#define CONFIG_USBD_HS
	98
	99	#define CONFIG_USB_GADGET_MASS_STORAGE
592f4aed MK	100	/* USB DFU */
	101	#define CONFIG_DFU_MMC
	102
	103	/* Miscellaneous commands */
592f4aed MK	104
	105	/* Framebuffer and LCD */
	106	#define CONFIG_VIDEO_IPUV3
	107	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	108	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	109	#define CONFIG_VIDEO_BMP_RLE8
	110	#define CONFIG_SPLASH_SCREEN
	111	#define CONFIG_SPLASH_SCREEN_ALIGN
	112	#define CONFIG_BMP_16BPP
	113	#define CONFIG_VIDEO_LOGO
	114	#define CONFIG_VIDEO_BMP_LOGO
592f4aed MK	115	#define CONFIG_CONSOLE_MUX
	116	#define CONFIG_IMX_HDMI
	117	#define CONFIG_IMX_VIDEO_SKIP
592f4aed MK	118
	119	/* allow to overwrite serial and ethaddr */
	120	#define CONFIG_ENV_OVERWRITE
	121	#define CONFIG_CONS_INDEX 1
592f4aed MK	122
	123	/* Command definition */
	124	#undef CONFIG_CMD_LOADB
	125	#undef CONFIG_CMD_LOADS
	126	#undef CONFIG_CMD_NFS
	127	#undef CONFIG_CMD_FLASH
	128
	129	#undef CONFIG_IPADDR
	130	#define CONFIG_IPADDR 192.168.10.2
	131	#define CONFIG_NETMASK 255.255.255.0
	132	#undef CONFIG_SERVERIP
	133	#define CONFIG_SERVERIP 192.168.10.1
	134
	135	#define CONFIG_LOADADDR 0x12000000
	136	#define CONFIG_SYS_TEXT_BASE 0x17800000
	137
	138	#ifdef CONFIG_CMD_SATA
	139	#define CONFIG_DRIVE_SATA "sata "
	140	#else
	141	#define CONFIG_DRIVE_SATA
	142	#endif
	143
	144	#ifdef CONFIG_CMD_MMC
	145	#define CONFIG_DRIVE_MMC "mmc "
	146	#else
	147	#define CONFIG_DRIVE_MMC
	148	#endif
	149
	150	#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
	151
	152	#define DFU_ALT_EMMC_INFO \
	153	"u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
	154	"boot part 0 1;" \
	155	"rootfs part 0 2;" \
	156	"uImage fat 0 1;" \
	157	"imx6q-colibri-eval-v3.dtb fat 0 1;" \
	158	"imx6q-colibri-cam-eval-v3.dtb fat 0 1"
	159
	160	#define EMMC_BOOTCMD \
	161	"emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
	162	"rootwait\0" \
	163	"emmcboot=run setup; " \
	164	"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
	165	"${vidargs}; echo Booting from internal eMMC chip...; " \
	166	"run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
	167	"${boot_file} && run fdt_fixup && " \
	168	"bootm ${kernel_addr_r} ${dtbparam}\0" \
	169	"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
	170	"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
	171
	172	#define MEM_LAYOUT_ENV_SETTINGS \
9af131e3	173	"bootm_size=0x20000000\0" \
592f4aed MK	174	"fdt_addr_r=0x12000000\0" \
	175	"fdt_high=0xffffffff\0" \
	176	"initrd_high=0xffffffff\0" \
	177	"kernel_addr_r=0x11000000\0" \
	178	"ramdisk_addr_r=0x12100000\0"
	179
	180	#define NFS_BOOTCMD \
	181	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
	182	"nfsboot=run setup; " \
	183	"setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
	184	"${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
	185	"run nfsdtbload; dhcp ${kernel_addr_r} " \
	186	"&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
	187	"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
	188	"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
	189
	190	#define SD_BOOTCMD \
	191	"sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
	192	"rootwait\0" \
	193	"sdboot=run setup; " \
	194	"setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
	195	"${vidargs}; echo Booting from SD card; " \
	196	"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
	197	"${boot_file} && run fdt_fixup && " \
	198	"bootm ${kernel_addr_r} ${dtbparam}\0" \
	199	"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
	200	"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
	201
	202	#define USB_BOOTCMD \
	203	"usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
	204	"rootwait\0" \
	205	"usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
	206	"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
	207	"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
	208	"${boot_file} && run fdt_fixup && " \
	209	"bootm ${kernel_addr_r} ${dtbparam}\0" \
	210	"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
	211	"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
	212
	213	#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
	214	#define FDT_FILE "imx6q-apalis-eval.dtb"
	215	#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
	216	#else
	217	#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
	218	#endif
	219	#define CONFIG_EXTRA_ENV_SETTINGS \
	220	"bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
	221	"run nfsboot ; echo ; echo nfsboot failed ; " \
	222	"usb start ;" \
	223	"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
	224	"boot_file=uImage\0" \
	225	"console=ttymxc0\0" \
	226	"defargs=enable_wait_mode=off vmalloc=400M\0" \
	227	"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
	228	EMMC_BOOTCMD \
	229	"fdt_file=" FDT_FILE "\0" \
	230	"fdt_fixup=;\0" \
	231	MEM_LAYOUT_ENV_SETTINGS \
	232	NFS_BOOTCMD \
	233	SD_BOOTCMD \
	234	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
	235	"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
	236	"flash_eth.img && source ${loadaddr}\0" \
	237	"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
238	"${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
239	"source ${loadaddr}\0" \
240	"setup=setenv setupargs fec_mac=${ethaddr} " \
241	"consoleblank=0 no_console_suspend=1 console=tty1 " \
242	"console=${console},${baudrate}n8\0 " \
243	"setupdate=run setsdupdate \|\| run setusbupdate \|\| run setethupdate\0" \
244	"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
245	"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
246	"source ${loadaddr}\0" \
247	"splashpos=m,m\0" \
248	"vidargs=mxc_hdmi.only_cea=1 " \
249	"video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
250	"video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
251	"fbmem=32M\0 "
252
253	/* Miscellaneous configurable options */
254	#define CONFIG_SYS_LONGHELP
255	#define CONFIG_AUTO_COMPLETE
256	#undef CONFIG_SYS_CBSIZE
257	#define CONFIG_SYS_CBSIZE 1024
258	#undef CONFIG_SYS_MAXARGS
259	#define CONFIG_SYS_MAXARGS 48
260
261	#define CONFIG_SYS_ALT_MEMTEST
262	#define CONFIG_SYS_MEMTEST_START 0x10000000
263	#define CONFIG_SYS_MEMTEST_END 0x10010000
264	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
265
266	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
267
268	#define CONFIG_CMDLINE_EDITING
269
270	/* Physical Memory Map */
271	#define CONFIG_NR_DRAM_BANKS 1
272	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
273
274	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
275	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
276	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
277
278	#define CONFIG_SYS_INIT_SP_OFFSET \
279	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
280	#define CONFIG_SYS_INIT_SP_ADDR \
281	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
282
e856bdcf	283	/* environment organization */
592f4aed MK	284
	285	#define CONFIG_ENV_SIZE (8 * 1024)
	286
592f4aed MK	287	#if defined(CONFIG_ENV_IS_IN_MMC)
	288	/* Environment in eMMC, before config block at the end of 1st "boot sector" */
	289	#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
	290	CONFIG_TDX_CFG_BLOCK_OFFSET)
	291	#define CONFIG_SYS_MMC_ENV_DEV 0
	292	#define CONFIG_SYS_MMC_ENV_PART 1
	293	#endif
	294
	295	#define CONFIG_OF_SYSTEM_SETUP
	296
	297	#define CONFIG_CMD_TIME
	298
	299	#define CONFIG_SUPPORT_RAW_INITRD
	300
592f4aed	301	#endif /* __CONFIG_H */