[people/ms/u-boot.git] / include / configs / bcm_ep_board.h

/*
 * Copyright 2014 Broadcom Corporation.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __BCM_EP_BOARD_H
#define __BCM_EP_BOARD_H

#include <asm/arch/configs.h>

#define CONFIG_SKIP_LOWLEVEL_INIT


/*
 * Memory configuration
 * (these must be defined elsewhere)
 */
#ifndef CONFIG_SYS_TEXT_BASE
#error	CONFIG_SYS_TEXT_BASE must be defined!
#endif
#ifndef CONFIG_SYS_SDRAM_BASE
#error	CONFIG_SYS_SDRAM_BASE must be defined!
#endif
#ifndef CONFIG_SYS_SDRAM_SIZE
#error	CONFIG_SYS_SDRAM_SIZE must be defined!
#endif

#define CONFIG_NR_DRAM_BANKS		1

#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
#define CONFIG_STACKSIZE		(256 * 1024)

/* Some commands use this as the default load address */
#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE

/*
 * This is the initial SP which is used only briefly for relocating the u-boot
 * image to the top of SDRAM. After relocation u-boot moves the stack to the
 * proper place.
 */
#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/* Serial Info */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL

#define CONFIG_BAUDRATE			115200

#define CONFIG_ENV_SIZE			0x2000
#define CONFIG_ENV_IS_NOWHERE

#define CONFIG_SYS_NO_FLASH	/* Not using NAND/NOR unmanaged flash */

/* console configuration */
#define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
			sizeof(CONFIG_SYS_PROMPT) + 16)	/* Printbuffer size */
#define CONFIG_SYS_MAXARGS		64
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

/*
 * One partition type must be defined for part.c
 * This is necessary for the fatls command to work on an SD card
 * for example.
 */
#define CONFIG_DOS_PARTITION

/* version string, parser, etc */
#define CONFIG_VERSION_VARIABLE
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_CMDLINE_EDITING
#define CONFIG_COMMAND_HISTORY
#define CONFIG_SYS_LONGHELP

#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC

/* Commands */
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE

/* Enable devicetree support */
#define CONFIG_OF_LIBFDT

/* SHA hashing */
#define CONFIG_CMD_HASH
#define CONFIG_HASH_VERIFY
#define CONFIG_SHA1
#define CONFIG_SHA256

/* Enable Time Command */
#define CONFIG_CMD_TIME

#define CONFIG_CMD_BOOTZ

/* Misc utility code */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CRC32_VERIFY

#endif /* __BCM_EP_BOARD_H */
Commit	Line	Data
da1f5ac2 SB	1	/*
	2	* Copyright 2014 Broadcom Corporation.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __BCM_EP_BOARD_H
	8	#define __BCM_EP_BOARD_H
	9
	10	#include <asm/arch/configs.h>
	11
da1f5ac2 SB	12	#define CONFIG_SKIP_LOWLEVEL_INIT
da1f5ac2 SB	13
da1f5ac2 SB	14
	15	/*
	16	* Memory configuration
	17	* (these must be defined elsewhere)
	18	*/
	19	#ifndef CONFIG_SYS_TEXT_BASE
	20	#error CONFIG_SYS_TEXT_BASE must be defined!
	21	#endif
	22	#ifndef CONFIG_SYS_SDRAM_BASE
	23	#error CONFIG_SYS_SDRAM_BASE must be defined!
	24	#endif
	25	#ifndef CONFIG_SYS_SDRAM_SIZE
	26	#error CONFIG_SYS_SDRAM_SIZE must be defined!
	27	#endif
	28
	29	#define CONFIG_NR_DRAM_BANKS 1
	30
	31	#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
	32	#define CONFIG_STACKSIZE (256 * 1024)
	33
	34	/* Some commands use this as the default load address */
	35	#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
	36
da1f5ac2 SB	37	/*
	38	* This is the initial SP which is used only briefly for relocating the u-boot
	39	* image to the top of SDRAM. After relocation u-boot moves the stack to the
	40	* proper place.
	41	*/
	42	#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
	43
	44	/* allow to overwrite serial and ethaddr */
	45	#define CONFIG_ENV_OVERWRITE
	46
	47	/* Serial Info */
	48	#define CONFIG_SYS_NS16550
	49	#define CONFIG_SYS_NS16550_SERIAL
	50
	51	#define CONFIG_BAUDRATE 115200
	52
	53	#define CONFIG_ENV_SIZE 0x2000
	54	#define CONFIG_ENV_IS_NOWHERE
	55
	56	#define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */
	57
	58	/* console configuration */
	59	#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */
	60	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	61	sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
	62	#define CONFIG_SYS_MAXARGS 64
	63	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	64
	65	/*
	66	* One partition type must be defined for part.c
	67	* This is necessary for the fatls command to work on an SD card
	68	* for example.
	69	*/
	70	#define CONFIG_DOS_PARTITION
	71
	72	/* version string, parser, etc */
	73	#define CONFIG_VERSION_VARIABLE
	74	#define CONFIG_AUTO_COMPLETE
	75	#define CONFIG_SYS_HUSH_PARSER
	76	#define CONFIG_CMDLINE_EDITING
	77	#define CONFIG_COMMAND_HISTORY
	78	#define CONFIG_SYS_LONGHELP
	79
	80	#define CONFIG_CRC32_VERIFY
	81	#define CONFIG_MX_CYCLIC
	82
	83	/* Commands */
da1f5ac2 SB	84	#define CONFIG_CMD_ASKENV
	85	#define CONFIG_CMD_CACHE
	86	#define CONFIG_CMD_FAT
	87	#define CONFIG_FAT_WRITE
	88
	89	/* Enable devicetree support */
	90	#define CONFIG_OF_LIBFDT
	91
	92	/* SHA hashing */
	93	#define CONFIG_CMD_HASH
	94	#define CONFIG_HASH_VERIFY
	95	#define CONFIG_SHA1
	96	#define CONFIG_SHA256
	97
	98	/* Enable Time Command */
	99	#define CONFIG_CMD_TIME
	100
	101	#define CONFIG_CMD_BOOTZ
	102
	103	/* Misc utility code */
	104	#define CONFIG_BOUNCE_BUFFER
	105	#define CONFIG_CRC32_VERIFY
	106
	107	#endif /* __BCM_EP_BOARD_H */