[people/ms/u-boot.git] / include / configs / cm_fx6.h

/*
 * Config file for Compulab CM-FX6 board
 *
 * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
 *
 * Author: Nikita Kiryanov <nikita@compulab.co.il>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_CM_FX6_H
#define __CONFIG_CM_FX6_H

#include "mx6_common.h"

/* Machine config */
#define CONFIG_SYS_LITTLE_ENDIAN
#define CONFIG_MACH_TYPE		4273

/* MMC */
#define CONFIG_SYS_FSL_USDHC_NUM	3
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR

/* RAM */
#define PHYS_SDRAM_1			MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_2			MMDC1_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_NR_DRAM_BANKS		2
#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		0x10010000
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Serial console */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART4_BASE
#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}

/* Shell */
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)

/* SPI flash */
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		25000000
#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)

/* MTD support */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_SPI_FLASH_MTD
#endif

#define MTDIDS_DEFAULT		"nor0=spi0.0"
#define MTDPARTS_DEFAULT	"mtdparts=spi0.0:" \
				"768k(uboot)," \
				"256k(uboot-environment)," \
				"-(reserved)"

/* Environment */
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
#define CONFIG_ENV_SIZE			(8 * 1024)
#define CONFIG_ENV_OFFSET		(768 * 1024)

#define CONFIG_EXTRA_ENV_SETTINGS \
	"stdin=serial,usbkbd\0" \
	"stdout=serial,vga\0" \
	"stderr=serial,vga\0" \
	"panel=HDMI\0" \
	"autoload=no\0" \
	"uImage=uImage-cm-fx6\0" \
	"zImage=zImage-cm-fx6\0" \
	"kernel=uImage-cm-fx6\0" \
	"script=boot.scr\0" \
	"dtb=cm-fx6.dtb\0" \
	"bootm_low=18000000\0" \
	"loadaddr=0x10800000\0" \
	"fdtaddr=0x11000000\0" \
	"console=ttymxc3,115200\0" \
	"ethprime=FEC0\0" \
	"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
	"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
	"doboot=bootm ${loadaddr}\0" \
	"doloadfdt=false\0" \
	"mtdids=" MTDIDS_DEFAULT "\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"setboottypez=setenv kernel ${zImage};" \
		"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
		"setenv doloadfdt true;\0" \
	"setboottypem=setenv kernel ${uImage};" \
		"setenv doboot bootm ${loadaddr};" \
		"setenv doloadfdt false;\0"\
	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
	"sataroot=/dev/sda2 rw rootwait\0" \
	"nandroot=/dev/mtdblock4 rw\0" \
	"nandrootfstype=ubifs\0" \
	"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
		"${video} ${extrabootargs}\0" \
	"sataargs=setenv bootargs console=${console} root=${sataroot} " \
		"${video} ${extrabootargs}\0" \
	"nandargs=setenv bootargs console=${console} " \
		"root=${nandroot} " \
		"rootfstype=${nandrootfstype} " \
		"${video} ${extrabootargs}\0" \
	"nandboot=if run nandloadkernel; then " \
			"run nandloadfdt;" \
			"run setboottypem;" \
			"run storagebootcmd;" \
			"run setboottypez;" \
			"run storagebootcmd;" \
		"fi;\0" \
	"run_eboot=echo Starting EBOOT ...; "\
		"mmc dev 2 && " \
		"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
	"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
	"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
	"loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
	"bootscript=echo Running bootscript from ${storagetype} ...;" \
		   "source ${loadaddr};\0" \
	"nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
	"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
	"setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
	"setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
	"setupnandboot=setenv storagetype nand;\0" \
	"setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
	"storagebootcmd=echo Booting from ${storagetype} ...;" \
			"run ${storagetype}args; run doboot;\0" \
	"trybootk=if run loadkernel; then " \
		"if ${doloadfdt}; then " \
			"run loadfdt;" \
		"fi;" \
		"run storagebootcmd;" \
		"fi;\0" \
	"trybootsmz=if run loadscript; then " \
			"run bootscript;" \
		"fi;" \
		"run setboottypem;" \
		"run trybootk;" \
		"run setboottypez;" \
		"run trybootk;\0"

#define CONFIG_BOOTCOMMAND \
	"run setupmmcboot;" \
	"mmc dev ${storagedev};" \
	"if mmc rescan; then " \
		"run trybootsmz;" \
	"fi;" \
	"run setupusbboot;" \
	"if usb start; then "\
		"if run loadscript; then " \
			"run bootscript;" \
		"fi;" \
	"fi;" \
	"run setupsataboot;" \
	"if sata init; then " \
		"run trybootsmz;" \
	"fi;" \
	"run setupnandboot;" \
	"run nandboot;"

#define CONFIG_PREBOOT		"usb start;sf probe"

/* SPI */
#define CONFIG_SPI
#define CONFIG_MXC_SPI

/* NAND */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_MAX_CHIPS	1
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_NAND_MXS
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* APBH DMA is required for NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
#endif

/* Ethernet */
#define CONFIG_FEC_MXC
#define CONFIG_FEC_MXC_PHYADDR		0
#define CONFIG_FEC_XCV_TYPE		RGMII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_PHY_ATHEROS
#define CONFIG_MII
#define CONFIG_ETHPRIME			"FEC0"
#define CONFIG_ARP_TIMEOUT		200UL
#define CONFIG_NET_RETRY_COUNT		5

/* USB */
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_MXC_I2C3_SPEED	400000

#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
#define CONFIG_SYS_I2C_EEPROM_BUS	2

/* SATA */
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_LIBATA
#define CONFIG_LBA48
#define CONFIG_DWC_AHSATA
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR

/* Boot */
#define CONFIG_SYS_BOOTMAPSZ	        (8 << 20)
#define CONFIG_SERIAL_TAG

/* misc */
#define CONFIG_SYS_MALLOC_LEN			(10 * 1024 * 1024)
#define CONFIG_MISC_INIT_R

/* SPL */
#include "imx6_spl.h"
#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
#define CONFIG_SPL_SPI_LOAD

/* Display */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_IPUV3_CLK          260000000
#define CONFIG_IMX_HDMI

#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SOURCE
#define CONFIG_VIDEO_BMP_RLE8

#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO

/* EEPROM */
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
#define CONFIG_SYS_EEPROM_SIZE			256

#endif	/* __CONFIG_CM_FX6_H */
Commit	Line	Data
e32028a7 NK	1	/*
	2	* Config file for Compulab CM-FX6 board
	3	*
	4	* Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
	5	*
	6	* Author: Nikita Kiryanov <nikita@compulab.co.il>
	7	*
	8	* SPDX-License-Identifier: GPL-2.0+
	9	*/
	10
	11	#ifndef __CONFIG_CM_FX6_H
	12	#define __CONFIG_CM_FX6_H
	13
e32028a7 NK	14	#include "mx6_common.h"
	15
	16	/* Machine config */
e32028a7 NK	17	#define CONFIG_SYS_LITTLE_ENDIAN
e32028a7 NK	18	#define CONFIG_MACH_TYPE 4273
e32028a7	19
e32028a7	20	/* MMC */
e32028a7 NK	21	#define CONFIG_SYS_FSL_USDHC_NUM 3
	22	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
	23
	24	/* RAM */
	25	#define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR
	26	#define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR
	27	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	28	#define CONFIG_NR_DRAM_BANKS 2
	29	#define CONFIG_SYS_MEMTEST_START 0x10000000
	30	#define CONFIG_SYS_MEMTEST_END 0x10010000
	31	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	32	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	33	#define CONFIG_SYS_INIT_SP_OFFSET \
	34	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	35	#define CONFIG_SYS_INIT_SP_ADDR \
	36	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	37
	38	/* Serial console */
	39	#define CONFIG_MXC_UART
	40	#define CONFIG_MXC_UART_BASE UART4_BASE
e32028a7 NK	41	#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
	42
	43	/* Shell */
e32028a7 NK	44	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	45	sizeof(CONFIG_SYS_PROMPT) + 16)
	46
	47	/* SPI flash */
e32028a7 NK	48	#define CONFIG_SF_DEFAULT_BUS 0
	49	#define CONFIG_SF_DEFAULT_CS 0
	50	#define CONFIG_SF_DEFAULT_SPEED 25000000
	51	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	52
63a93093 CS	53	/* MTD support */
63a93093 CS	54	#ifndef CONFIG_SPL_BUILD
63a93093 CS	55	#define CONFIG_MTD_DEVICE
	56	#define CONFIG_MTD_PARTITIONS
	57	#define CONFIG_SPI_FLASH_MTD
	58	#endif
	59
	60	#define MTDIDS_DEFAULT "nor0=spi0.0"
	61	#define MTDPARTS_DEFAULT "mtdparts=spi0.0:" \
	62	"768k(uboot)," \
	63	"256k(uboot-environment)," \
	64	"-(reserved)"
	65
e32028a7	66	/* Environment */
e32028a7 NK	67	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	68	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	69	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	70	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	71	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	72	#define CONFIG_ENV_SIZE (8 * 1024)
	73	#define CONFIG_ENV_OFFSET (768 * 1024)
	74
	75	#define CONFIG_EXTRA_ENV_SETTINGS \
1c2e5292	76	"stdin=serial,usbkbd\0" \
deb94d61 NK	77	"stdout=serial,vga\0" \
	78	"stderr=serial,vga\0" \
	79	"panel=HDMI\0" \
e32028a7	80	"autoload=no\0" \
f0f6724f CS	81	"uImage=uImage-cm-fx6\0" \
f0f6724f CS	82	"zImage=zImage-cm-fx6\0" \
508a6ede NK	83	"kernel=uImage-cm-fx6\0" \
	84	"script=boot.scr\0" \
	85	"dtb=cm-fx6.dtb\0" \
	86	"bootm_low=18000000\0" \
e32028a7 NK	87	"loadaddr=0x10800000\0" \
	88	"fdtaddr=0x11000000\0" \
	89	"console=ttymxc3,115200\0" \
	90	"ethprime=FEC0\0" \
e32028a7 NK	91	"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
e32028a7 NK	92	"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
e32028a7	93	"doboot=bootm ${loadaddr}\0" \
508a6ede	94	"doloadfdt=false\0" \
63a93093 CS	95	"mtdids=" MTDIDS_DEFAULT "\0" \
63a93093 CS	96	"mtdparts=" MTDPARTS_DEFAULT "\0" \
f0f6724f	97	"setboottypez=setenv kernel ${zImage};" \
e32028a7	98	"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
508a6ede	99	"setenv doloadfdt true;\0" \
f0f6724f	100	"setboottypem=setenv kernel ${uImage};" \
e32028a7	101	"setenv doboot bootm ${loadaddr};" \
508a6ede	102	"setenv doloadfdt false;\0"\
e32028a7	103	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
206f38f7	104	"sataroot=/dev/sda2 rw rootwait\0" \
a6b0652b NK	105	"nandroot=/dev/mtdblock4 rw\0" \
a6b0652b NK	106	"nandrootfstype=ubifs\0" \
508a6ede	107	"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
f0f6724f	108	"${video} ${extrabootargs}\0" \
508a6ede	109	"sataargs=setenv bootargs console=${console} root=${sataroot} " \
f0f6724f	110	"${video} ${extrabootargs}\0" \
a6b0652b NK	111	"nandargs=setenv bootargs console=${console} " \
	112	"root=${nandroot} " \
	113	"rootfstype=${nandrootfstype} " \
f0f6724f	114	"${video} ${extrabootargs}\0" \
508a6ede	115	"nandboot=if run nandloadkernel; then " \
a6b0652b	116	"run nandloadfdt;" \
508a6ede NK	117	"run setboottypem;" \
	118	"run storagebootcmd;" \
	119	"run setboottypez;" \
	120	"run storagebootcmd;" \
	121	"fi;\0" \
	122	"run_eboot=echo Starting EBOOT ...; "\
	123	"mmc dev 2 && " \
	124	"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
	125	"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
	126	"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
	127	"loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
	128	"bootscript=echo Running bootscript from ${storagetype} ...;" \
	129	"source ${loadaddr};\0" \
	130	"nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
	131	"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
	132	"setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
	133	"setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
	134	"setupnandboot=setenv storagetype nand;\0" \
	135	"setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
	136	"storagebootcmd=echo Booting from ${storagetype} ...;" \
	137	"run ${storagetype}args; run doboot;\0" \
	138	"trybootk=if run loadkernel; then " \
	139	"if ${doloadfdt}; then " \
	140	"run loadfdt;" \
a6b0652b	141	"fi;" \
508a6ede NK	142	"run storagebootcmd;" \
	143	"fi;\0" \
	144	"trybootsmz=if run loadscript; then " \
	145	"run bootscript;" \
206f38f7	146	"fi;" \
508a6ede NK	147	"run setboottypem;" \
	148	"run trybootk;" \
	149	"run setboottypez;" \
	150	"run trybootk;\0"
e32028a7 NK	151
e32028a7 NK	152	#define CONFIG_BOOTCOMMAND \
508a6ede NK	153	"run setupmmcboot;" \
	154	"mmc dev ${storagedev};" \
	155	"if mmc rescan; then " \
	156	"run trybootsmz;" \
	157	"fi;" \
	158	"run setupusbboot;" \
	159	"if usb start; then "\
	160	"if run loadscript; then " \
	161	"run bootscript;" \
	162	"fi;" \
	163	"fi;" \
	164	"run setupsataboot;" \
	165	"if sata init; then " \
	166	"run trybootsmz;" \
	167	"fi;" \
	168	"run setupnandboot;" \
	169	"run nandboot;"
e32028a7	170
63a93093	171	#define CONFIG_PREBOOT "usb start;sf probe"
1c2e5292	172
e32028a7 NK	173	/* SPI */
	174	#define CONFIG_SPI
	175	#define CONFIG_MXC_SPI
e32028a7	176
a6b0652b NK	177	/* NAND */
a6b0652b NK	178	#ifndef CONFIG_SPL_BUILD
a6b0652b NK	179	#define CONFIG_SYS_NAND_BASE 0x40000000
	180	#define CONFIG_SYS_NAND_MAX_CHIPS 1
	181	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	182	#define CONFIG_NAND_MXS
	183	#define CONFIG_SYS_NAND_ONFI_DETECTION
	184	/* APBH DMA is required for NAND support */
	185	#define CONFIG_APBH_DMA
	186	#define CONFIG_APBH_DMA_BURST
	187	#define CONFIG_APBH_DMA_BURST8
	188	#endif
	189
02b1343e NK	190	/* Ethernet */
	191	#define CONFIG_FEC_MXC
	192	#define CONFIG_FEC_MXC_PHYADDR 0
	193	#define CONFIG_FEC_XCV_TYPE RGMII
	194	#define IMX_FEC_BASE ENET_BASE_ADDR
02b1343e NK	195	#define CONFIG_PHY_ATHEROS
	196	#define CONFIG_MII
	197	#define CONFIG_ETHPRIME "FEC0"
	198	#define CONFIG_ARP_TIMEOUT 200UL
02b1343e NK	199	#define CONFIG_NET_RETRY_COUNT 5
02b1343e NK	200
0f3effb9	201	/* USB */
0f3effb9 NK	202	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	203	#define CONFIG_MXC_USB_FLAGS 0
	204	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	205	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	206
f42b2f60	207	/* I2C */
f42b2f60 NK	208	#define CONFIG_SYS_I2C
f42b2f60 NK	209	#define CONFIG_SYS_I2C_MXC
03544c66 AA	210	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	211	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	212	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
f42b2f60 NK	213	#define CONFIG_SYS_I2C_SPEED 100000
	214	#define CONFIG_SYS_MXC_I2C3_SPEED 400000
	215
	216	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	217	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	218	#define CONFIG_SYS_I2C_EEPROM_BUS 2
	219
206f38f7	220	/* SATA */
206f38f7 NK	221	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	222	#define CONFIG_LIBATA
	223	#define CONFIG_LBA48
	224	#define CONFIG_DWC_AHSATA
	225	#define CONFIG_DWC_AHSATA_PORT_ID 0
	226	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	227
e32028a7	228	/* Boot */
e32028a7	229	#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
f66113c0	230	#define CONFIG_SERIAL_TAG
e32028a7 NK	231
e32028a7 NK	232	/* misc */
9fbdcf01	233	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
7d1abb7d	234	#define CONFIG_MISC_INIT_R
e32028a7 NK	235
	236	/* SPL */
	237	#include "imx6_spl.h"
e32028a7 NK	238	#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
	239	#define CONFIG_SPL_SPI_LOAD
	240
deb94d61	241	/* Display */
deb94d61 NK	242	#define CONFIG_VIDEO_IPUV3
	243	#define CONFIG_IPUV3_CLK 260000000
	244	#define CONFIG_IMX_HDMI
deb94d61	245
3a236a35	246	#define CONFIG_SPLASH_SCREEN
f82eb2fa	247	#define CONFIG_SPLASH_SOURCE
3a236a35 NK	248	#define CONFIG_VIDEO_BMP_RLE8
3a236a35 NK	249
8015dde8 NK	250	#define CONFIG_VIDEO_LOGO
	251	#define CONFIG_VIDEO_BMP_LOGO
	252
12616531	253	/* EEPROM */
12616531 NK	254	#define CONFIG_ENV_EEPROM_IS_ON_I2C
	255	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	256	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
	257	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
	258	#define CONFIG_SYS_EEPROM_SIZE 256
	259
e32028a7	260	#endif /* __CONFIG_CM_FX6_H */