[people/ms/u-boot.git] / include / configs / db-mv784mp-gp.h

/*
 * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_DB_MV7846MP_GP_H
#define _CONFIG_DB_MV7846MP_GP_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_DB_784MP_GP		/* Board target name for DDR training */

#define CONFIG_DISPLAY_BOARDINFO_LATE

/*
 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
 * for DDR ECC byte filling in the SPL before loading the main
 * U-Boot into it.
 */
#define	CONFIG_SYS_TEXT_BASE	0x00800000
#define CONFIG_SYS_TCLK		250000000	/* 250MHz */

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#define CONFIG_CMD_ENV
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SATA

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MVTWSI
#define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
#define CONFIG_SYS_I2C_SLAVE		0x0
#define CONFIG_SYS_I2C_SPEED		100000

/* USB/EHCI configuration */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3

/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED		1000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3

/* Environment in SPI NOR flash */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */

#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */

#define CONFIG_SYS_ALT_MEMTEST

/* SATA support */
#define CONFIG_SYS_SATA_MAX_DEVICE	2
#define CONFIG_SATA_MV
#define CONFIG_LIBATA
#define CONFIG_LBA48
#define CONFIG_EFI_PARTITION

/* Additional FS support/configuration */
#define CONFIG_SUPPORT_VFAT

/* PCIe support */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_PCI_MVEBU
#define CONFIG_PCI_SCAN_SHOW
#endif

/* NAND */
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_ONFI_DETECTION

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/*
 * Memory layout while starting into the bin_hdr via the
 * BootROM:
 *
 * 0x4000.4000 - 0x4003.4000	headers space (192KiB)
 * 0x4000.4030			bin_hdr start address
 * 0x4003.4000 - 0x4004.7c00	BootROM memory allocations (15KiB)
 * 0x4007.fffc			BootROM stack top
 *
 * The address space between 0x4007.fffc and 0x400f.fff is not locked in
 * L2 cache thus cannot be used.
 */

/* SPL */
/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE		0x40004030
#define CONFIG_SPL_MAX_SIZE		((128 << 10) - 0x4030)

#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MALLOC_SIMPLE
#endif

#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)

/* SPL related SPI defines */
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
#define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS

/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
#define CONFIG_SPD_EEPROM		0x4e
#define CONFIG_BOARD_ECC_SUPPORT	/* this board supports ECC */

#endif /* _CONFIG_DB_MV7846MP_GP_H */
Commit	Line	Data
dd580801	1	/*
c4be10b5	2	* Copyright (C) 2014-2015 Stefan Roese <sr@denx.de>
dd580801 SR	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef _CONFIG_DB_MV7846MP_GP_H
	8	#define _CONFIG_DB_MV7846MP_GP_H
	9
	10	/*
	11	* High Level Configuration Options (easy to change)
	12	*/
2554167c SR	13	#define CONFIG_DB_784MP_GP /* Board target name for DDR training */
2554167c SR	14
dd580801 SR	15	#define CONFIG_DISPLAY_BOARDINFO_LATE
dd580801 SR	16
2923c2d2 SR	17	/*
	18	* TEXT_BASE needs to be below 16MiB, since this area is scrubbed
	19	* for DDR ECC byte filling in the SPL before loading the main
	20	* U-Boot into it.
	21	*/
	22	#define CONFIG_SYS_TEXT_BASE 0x00800000
dd580801 SR	23	#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
	24
	25	/*
	26	* Commands configuration
	27	*/
	28	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
dd580801	29	#define CONFIG_CMD_ENV
d6b6303d	30	#define CONFIG_CMD_NAND
41e705ac	31	#define CONFIG_CMD_PCI
c4be10b5	32	#define CONFIG_CMD_SATA
dd580801 SR	33
	34	/* I2C */
	35	#define CONFIG_SYS_I2C
	36	#define CONFIG_SYS_I2C_MVTWSI
dd82242b	37	#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
dd580801 SR	38	#define CONFIG_SYS_I2C_SLAVE 0x0
	39	#define CONFIG_SYS_I2C_SPEED 100000
	40
49114c87	41	/* USB/EHCI configuration */
49114c87	42	#define CONFIG_EHCI_IS_TDI
8a333716	43	#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
49114c87	44
dd580801 SR	45	/* SPI NOR flash default params, used by sf commands */
	46	#define CONFIG_SF_DEFAULT_SPEED 1000000
	47	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
dd580801 SR	48
	49	/* Environment in SPI NOR flash */
	50	#define CONFIG_ENV_IS_IN_SPI_FLASH
	51	#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
	52	#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
	53	#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
	54
	55	#define CONFIG_PHY_MARVELL /* there is a marvell phy */
dd580801	56	#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
dd580801	57
dd580801 SR	58	#define CONFIG_SYS_ALT_MEMTEST
dd580801 SR	59
e863f7f0	60	/* SATA support */
c4be10b5 SR	61	#define CONFIG_SYS_SATA_MAX_DEVICE 2
	62	#define CONFIG_SATA_MV
	63	#define CONFIG_LIBATA
	64	#define CONFIG_LBA48
	65	#define CONFIG_EFI_PARTITION
e863f7f0	66
8c822825 SR	67	/* Additional FS support/configuration */
	68	#define CONFIG_SUPPORT_VFAT
	69
41e705ac	70	/* PCIe support */
6451223a	71	#ifndef CONFIG_SPL_BUILD
41e705ac	72	#define CONFIG_PCI_MVEBU
41e705ac	73	#define CONFIG_PCI_SCAN_SHOW
6451223a	74	#endif
41e705ac	75
d6b6303d SR	76	/* NAND */
	77	#define CONFIG_SYS_NAND_USE_FLASH_BBT
	78	#define CONFIG_SYS_NAND_ONFI_DETECTION
	79
dd580801 SR	80	/*
	81	* mv-common.h should be defined after CMD configs since it used them
	82	* to enable certain macros
	83	*/
	84	#include "mv-common.h"
	85
2554167c SR	86	/*
	87	* Memory layout while starting into the bin_hdr via the
	88	* BootROM:
	89	*
	90	* 0x4000.4000 - 0x4003.4000 headers space (192KiB)
	91	* 0x4000.4030 bin_hdr start address
	92	* 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
	93	* 0x4007.fffc BootROM stack top
	94	*
	95	* The address space between 0x4007.fffc and 0x400f.fff is not locked in
	96	* L2 cache thus cannot be used.
	97	*/
	98
	99	/* SPL */
	100	/* Defines for SPL */
	101	#define CONFIG_SPL_FRAMEWORK
	102	#define CONFIG_SPL_TEXT_BASE 0x40004030
	103	#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
	104
	105	#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
	106	#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
	107
6451223a SR	108	#ifdef CONFIG_SPL_BUILD
	109	#define CONFIG_SYS_MALLOC_SIMPLE
	110	#endif
2554167c SR	111
	112	#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
	113	#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
	114
2554167c	115	/* SPL related SPI defines */
2554167c	116	#define CONFIG_SPL_SPI_LOAD
2554167c	117	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
2bd8711e	118	#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
2554167c SR	119
2554167c SR	120	/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
2554167c	121	#define CONFIG_SPD_EEPROM 0x4e
698ffab2	122	#define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */
2554167c	123
dd580801	124	#endif /* _CONFIG_DB_MV7846MP_GP_H */