[people/ms/u-boot.git] / include / configs / digsy_mtc.h

/*
 * (C) Copyright 2003-2004
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * (C) Copyright 2005-2007
 * Modified for InterControl digsyMTC MPC5200 board by
 * Frank Bodammer, GCD Hard- & Software GmbH,
 *                 frank.bodammer@gcd-solutions.de
 *
 * (C) Copyright 2009 Semihalf
 * Optimized for digsyMTC by: Grzegorz Bernacki <gjb@semihalf.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */

#define CONFIG_MPC5200		1	/* This is an MPC5200 CPU */
#define CONFIG_DIGSY_MTC	1	/* ... on InterControl digsyMTC board */
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_GENERIC_BOARD

/*
 * Valid values for CONFIG_SYS_TEXT_BASE are:
 * 0xFFF00000	boot high (standard configuration)
 * 0xFE000000	boot low
 * 0x00100000	boot from RAM (for testing only)
 */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE	0xFFF00000	/* Standard: boot high */
#endif

#define CONFIG_SYS_MPC5XXX_CLKIN	33000000

#define CONFIG_SYS_CACHELINE_SIZE	32

/*
 * Serial console configuration
 */
#define CONFIG_PSC_CONSOLE	4	/* console is on PSC4  */
#define CONFIG_BAUDRATE		115200	/* ... at 115200  bps  */
#define CONFIG_SYS_BAUDRATE_TABLE	\
	{ 9600, 19200, 38400, 57600, 115200, 230400 }

/*
 * PCI Mapping:
 * 0x40000000 - 0x4fffffff - PCI Memory
 * 0x50000000 - 0x50ffffff - PCI IO Space
 */
#define CONFIG_PCI		1
#define CONFIG_PCI_PNP		1
#define CONFIG_PCI_SCAN_SHOW	1
#define CONFIG_PCI_BOOTDELAY	250

#define CONFIG_PCI_MEM_BUS	0x40000000
#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE	0x10000000

#define CONFIG_PCI_IO_BUS	0x50000000
#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE	0x01000000

/*
 *  Partitions
 */
#define CONFIG_DOS_PARTITION
#define CONFIG_BZIP2

/*
 * Video
 */
#define CONFIG_VIDEO

#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MB862xx
#define CONFIG_VIDEO_MB862xx_ACCEL
#define CONFIG_VIDEO_CORALP
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SPLASH_SCREEN
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)	/* decompressed img */

/* Coral-PA clock frequency, geo and other both 133MHz */
#define CONFIG_SYS_MB862xx_CCF	0x00050000
/* Video SDRAM parameters */
#define CONFIG_SYS_MB862xx_MMR	0x11d7fa72
#endif

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#ifdef CONFIG_VIDEO
#define CONFIG_CMD_BMP
#endif
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB

#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)
#define CONFIG_SYS_LOWBOOT	1
#endif

/*
 * Autobooting
 */
#define CONFIG_BOOTDELAY	1

#undef	CONFIG_BOOTARGS

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"fw_image=digsyMPC.img\0"					\
	"mtcb_start=mtc led diag orange; run mtcb_1\0"			\
	"mtcb_clearled=for x in user1 user2 usbpwr usbbusy; "		\
		"do mtc led $x; done\0"					\
	"mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; "	\
		"else run mtcb_fw; fi\0"				\
	"mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; "		\
		"else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0"	\
	"mtcb_update=mtc led user1 orange;"				\
		"while mtc key; do ; done; run mtcb_2;\0"		\
	"mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0"	\
	"mtcb_usb1=if fatload usb 0 400000 script.img; "		\
		"then run mtcb_doscript; else run mtcb_usb2; fi\0"	\
	"mtcb_usb2=if fatload usb 0 400000 $fw_image; "			\
		"then run mtcb_dousb; else run mtcb_ide; fi\0"		\
	"mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; "	\
		"run mtcb_wait_flickr mtcb_ds_1;\0"			\
	"mtcb_ds_1=if imi 400000; then mtc led usbbusy; "		\
		"source 400000; else run mtcb_error; fi\0"		\
	"mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0"	\
	"mtcb_du_1=if imi 400000; then run mtcb_du_2; "			\
		"else run mtcb_error; fi\0"				\
	"mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; "		\
		"run mtcb_checkfw\0"					\
	"mtcb_checkfw=if imi ff000000; then run mtcb_success; "		\
		"else run mtcb_error; fi\0"				\
	"mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0"	\
	"mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0"		\
	"mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\
	"mtcb_uledflckr=mtc led user1 orange 11\0"			\
	"mtcb_error=mtc led user1 red\0"				\
	"mtcb_clear=erase ff000000 ff0fffff\0"				\
	"mtcb_prog=cp.b 400000 ff000000 ${filesize}\0"			\
	"mtcb_success=mtc led user1 green\0"				\
	"mtcb_ide=if fatload ide 0 400000 $fw_image;"			\
		"then run mtcb_doide; else run mtcb_error; fi\0"	\
	"mtcb_doide=mtc led user2 green 1;"				\
		"run mtcb_wait_flickr mtcb_di_1;\0"			\
	"mtcb_di_1=if imi 400000; then run mtcb_di_2;"			\
		"else run mtcb_error; fi\0"				\
	"mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0"	\
	"ramdisk_num_sector=16\0"					\
	"flash_base=ff000000\0"						\
	"flashdisk_size=e00000\0"					\
	"env_sector=fff60000\0"						\
	"flashdisk_start=ff100000\0"					\
	"load_cmd=tftp 400000 digsyMPC.img\0"				\
	"clear_cmd=erase ff000000 ff0fffff\0"				\
	"flash_cmd=cp.b 400000 ff000000 ${filesize}\0"			\
	"update_cmd=run load_cmd; "					\
	"iminfo 400000; "						\
	"run clear_cmd flash_cmd; "					\
	"iminfo ff000000\0"						\
	"spi_driver=yes\0"						\
	"spi_watchdog=no\0"						\
	"ftps_start=yes\0"						\
	"ftps_user1=admin\0"						\
	"ftps_pass1=admin\0"						\
	"ftps_base1=/\0"						\
	"ftps_home1=/\0"						\
	"plc_sio_srv=no\0"						\
	"plc_sio_baud=57600\0"						\
	"plc_sio_parity=no\0"						\
	"plc_sio_stop=1\0"						\
	"plc_sio_com=2\0"						\
	"plc_eth_srv=yes\0"						\
	"plc_eth_port=1200\0"						\
	"plc_root=/ide/\0"						\
	"diag_level=0\0"						\
	"webvisu=no\0"							\
	"plc_can1_routing=no\0"						\
	"plc_can1_baudrate=250\0"					\
	"plc_can2_routing=no\0"						\
	"plc_can2_baudrate=250\0"					\
	"plc_can3_routing=no\0"						\
	"plc_can3_baudrate=250\0"					\
	"plc_can4_routing=no\0"						\
	"plc_can4_baudrate=250\0"					\
	"netdev=eth0\0"							\
	"console=ttyPSC0\0"						\
	"kernel_addr_r=400000\0"					\
	"fdt_addr_r=600000\0"						\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
	"nfsroot=${serverip}:${rootpath}\0"				\
	"addip=setenv bootargs ${bootargs} "				\
	"ip=${ipaddr}:${serverip}:${gatewayip}:"			\
	"${netmask}:${hostname}:${netdev}:off panic=1\0"		\
	"addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\
	"rootpath=/opt/eldk/ppc_6xx\0"					\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
		"tftp ${fdt_addr_r} ${fdt_file};"			\
		"run nfsargs addip addcons;"				\
		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
	"load=tftp 200000 ${u-boot}\0"					\
	"update=protect off FFF00000 +${filesize};"			\
		"erase FFF00000 +${filesize};"				\
		"cp.b 200000 FFF00000 ${filesize};"			\
		"protect on FFF00000 +${filesize}\0"			\
	""

#define CONFIG_BOOTCOMMAND	"run mtcb_start"

/*
 * SPI configuration
 */
#define CONFIG_HARD_SPI		1
#define CONFIG_MPC52XX_SPI	1

/*
 * I2C configuration
 */
#define CONFIG_HARD_I2C		1
#define CONFIG_SYS_I2C_MODULE	1
#define CONFIG_SYS_I2C_SPEED	100000
#define CONFIG_SYS_I2C_SLAVE	0x7F

/*
 * EEPROM configuration
 */
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 	1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70

/*
 * RTC configuration
 */
#if defined(CONFIG_DIGSY_REV5)
#define CONFIG_SYS_I2C_RTC_ADDR	0x56
#define CONFIG_RTC_RV3029
/* Enable 5k Ohm trickle charge resistor */
#define CONFIG_SYS_RV3029_TCR	0x20
#else
#define CONFIG_RTC_DS1337
#define CONFIG_SYS_I2C_RTC_ADDR	0x68
#define CONFIG_SYS_DS1339_TCR_VAL	0xAB	/* diode + 4k resistor */
#endif

/*
 * Flash configuration
 */
#define	CONFIG_SYS_FLASH_CFI		1
#define	CONFIG_FLASH_CFI_DRIVER	1

#if defined(CONFIG_DIGSY_REV5)
#define CONFIG_SYS_FLASH_BASE		0xFE000000
#define CONFIG_SYS_FLASH_BASE_CS1	0xFC000000
#define CONFIG_SYS_MAX_FLASH_BANKS	2
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, \
					CONFIG_SYS_FLASH_BASE_CS1}
#define CONFIG_SYS_UPDATE_FLASH_SIZE
#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
#else
#define CONFIG_SYS_FLASH_BASE		0xFF000000
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
#endif

#define CONFIG_SYS_MAX_FLASH_SECT	256
#define CONFIG_FLASH_16BIT
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_SIZE	0x01000000
#define CONFIG_SYS_FLASH_ERASE_TOUT	240000
#define CONFIG_SYS_FLASH_WRITE_TOUT	500

#define CONFIG_OF_LIBFDT  1
#define CONFIG_OF_BOARD_SETUP	1

#define OF_CPU			"PowerPC,5200@0"
#define OF_SOC			"soc5200@f0000000"
#define OF_TBCLK		(bd->bi_busfreq / 4)

#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_MISC_INIT_R

/*
 * Environment settings
 */
#define CONFIG_ENV_IS_IN_FLASH	1
#if defined(CONFIG_LOWBOOT)
#define CONFIG_ENV_ADDR		0xFF060000
#else	/* CONFIG_LOWBOOT */
#define CONFIG_ENV_ADDR		0xFFF60000
#endif	/* CONFIG_LOWBOOT */
#define CONFIG_ENV_SIZE		0x10000
#define CONFIG_ENV_SECT_SIZE	0x20000
#define CONFIG_ENV_OVERWRITE	1

/*
 * Memory map
 */
#define CONFIG_SYS_MBAR		0xF0000000
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#if !defined(CONFIG_SYS_LOWBOOT)
#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
#else
#define CONFIG_SYS_DEFAULT_MBAR	0xF0000000
#endif

/*
 *  Use SRAM until RAM will be available
 */
#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
#define CONFIG_SYS_INIT_RAM_SIZE		MPC5XXX_SRAM_SIZE

#define CONFIG_SYS_GBL_DATA_OFFSET	\
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT		1
#endif

#define CONFIG_SYS_MONITOR_LEN	(256 << 10)
#define CONFIG_SYS_MALLOC_LEN	(4096 << 10)
#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)

/*
 * Ethernet configuration
 */
#define CONFIG_MPC5xxx_FEC	1
#define CONFIG_MPC5xxx_FEC_MII100
#if defined(CONFIG_DIGSY_REV5)
#define CONFIG_PHY_ADDR		0x01
#else
#define CONFIG_PHY_ADDR		0x00
#endif
#define CONFIG_PHY_RESET_DELAY	1000

#define CONFIG_NETCONSOLE		/* include NetConsole support	*/

/*
 * GPIO configuration
 * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1)
 *  Bit 0   (mask 0x80000000) : 0x1
 * SPI on Tmr2/3/4/5 pins
 *  Bit 2:3 (mask 0x30000000) : 0x2
 * ATA cs0/1 on csb_4/5
 *  Bit 6:7 (mask 0x03000000) : 0x2
 * Ethernet 100Mbit with MD
 *  Bits 12:15 (mask 0x000f0000): 0x5
 * USB - Two UARTs
 *  Bits 18:19 (mask 0x00003000) : 0x2
 * PSC3 - USB2 on PSC3
 *  Bits 20:23 (mask 0x00000f00) : 0x1
 * PSC2 - CAN1&2 on PSC2 pins
 *  Bits 25:27 (mask 0x00000070) : 0x1
 * PSC1 - AC97 functionality
 *  Bits 29:31 (mask 0x00000007) : 0x2
 */
#define CONFIG_SYS_GPS_PORT_CONFIG	0xA2552112

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE	1
#define CONFIG_CMDLINE_EDITING	1
#define CONFIG_SYS_HUSH_PARSER

#define CONFIG_LOOPW		1
#define CONFIG_MX_CYCLIC	1
#define CONFIG_ZERO_BOOTDELAY_CHECK

#define CONFIG_SYS_CBSIZE		1024
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS		32
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_SCRATCH	0x00001000
#define CONFIG_SYS_MEMTEST_START	0x00010000
#define CONFIG_SYS_MEMTEST_END		0x019fffff

#define CONFIG_SYS_LOAD_ADDR		0x00100000

/*
 * Various low-level settings
 */
#define CONFIG_SYS_SDRAM_CS1		1
#define CONFIG_SYS_XLB_PIPELINING	1

#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL		HID0_ICE

#if defined(CONFIG_SYS_LOWBOOT)
#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_BOOTCS_CFG		0x0002DD00
#endif

#define CONFIG_SYS_CS4_START		0x60000000
#define CONFIG_SYS_CS4_SIZE		0x1000
#define CONFIG_SYS_CS4_CFG		0x0008FC00

#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_CS0_CFG		0x0002DD00

#if defined(CONFIG_DIGSY_REV5)
#define CONFIG_SYS_CS1_START		CONFIG_SYS_FLASH_BASE_CS1
#define CONFIG_SYS_CS1_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_CS1_CFG		0x0002DD00
#endif

#define CONFIG_SYS_CS_BURST		0x00000000
#define CONFIG_SYS_CS_DEADCYCLE	0x11111111

#if !defined(CONFIG_SYS_LOWBOOT)
#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
#else
#define CONFIG_SYS_RESET_ADDRESS	0xff000100
#endif

/*
 * USB
 */
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_OHCI_BE_CONTROLLER
#define CONFIG_USB_STORAGE

#define CONFIG_USB_CLOCK	0x00013333
#define CONFIG_USB_CONFIG	0x00002000

#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
#define CONFIG_SYS_USB_OHCI_REGS_BASE	MPC5XXX_USB
#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"mpc5200"
#define CONFIG_SYS_USB_OHCI_CPU_INIT

/*
 * IDE/ATA
 */
#define CONFIG_IDE_RESET
#define CONFIG_IDE_PREINIT

#define CONFIG_SYS_ATA_CS_ON_I2C2
#define CONFIG_SYS_IDE_MAXBUS		1
#define CONFIG_SYS_IDE_MAXDEVICE	1

#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
#define CONFIG_SYS_ATA_STRIDE		4

#define CONFIG_ATAPI		1
#define CONFIG_LBA48		1

#endif /* __CONFIG_H */
Commit	Line	Data
5c4fa9b4 GB	1	/*
	2	* (C) Copyright 2003-2004
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* (C) Copyright 2005-2007
	6	* Modified for InterControl digsyMTC MPC5200 board by
	7	* Frank Bodammer, GCD Hard- & Software GmbH,
	8	* frank.bodammer@gcd-solutions.de
	9	*
	10	* (C) Copyright 2009 Semihalf
	11	* Optimized for digsyMTC by: Grzegorz Bernacki <gjb@semihalf.com>
	12	*
1a459660	13	* SPDX-License-Identifier: GPL-2.0+
5c4fa9b4 GB	14	*/
	15
	16	#ifndef __CONFIG_H
	17	#define __CONFIG_H
	18
	19	/*
	20	* High Level Configuration Options
	21	*/
	22
b2a6dfe4	23	#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
5c4fa9b4	24	#define CONFIG_DIGSY_MTC 1 /* ... on InterControl digsyMTC board */
77d4357d AG	25	#define CONFIG_DISPLAY_BOARDINFO
77d4357d AG	26	#define CONFIG_SYS_GENERIC_BOARD
5c4fa9b4	27
2ae18241 WD	28	/*
	29	* Valid values for CONFIG_SYS_TEXT_BASE are:
	30	* 0xFFF00000 boot high (standard configuration)
	31	* 0xFE000000 boot low
	32	* 0x00100000 boot from RAM (for testing only)
	33	*/
	34	#ifndef CONFIG_SYS_TEXT_BASE
	35	#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */
	36	#endif
	37
5c4fa9b4 GB	38	#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
5c4fa9b4 GB	39
5c4fa9b4 GB	40	#define CONFIG_SYS_CACHELINE_SIZE 32
	41
	42	/*
	43	* Serial console configuration
	44	*/
	45	#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 */
	46	#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
	47	#define CONFIG_SYS_BAUDRATE_TABLE \
	48	{ 9600, 19200, 38400, 57600, 115200, 230400 }
	49
	50	/*
	51	* PCI Mapping:
	52	* 0x40000000 - 0x4fffffff - PCI Memory
	53	* 0x50000000 - 0x50ffffff - PCI IO Space
	54	*/
	55	#define CONFIG_PCI 1
	56	#define CONFIG_PCI_PNP 1
	57	#define CONFIG_PCI_SCAN_SHOW 1
4fc823dd	58	#define CONFIG_PCI_BOOTDELAY 250
5c4fa9b4 GB	59
	60	#define CONFIG_PCI_MEM_BUS 0x40000000
	61	#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
	62	#define CONFIG_PCI_MEM_SIZE 0x10000000
	63
	64	#define CONFIG_PCI_IO_BUS 0x50000000
	65	#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
	66	#define CONFIG_PCI_IO_SIZE 0x01000000
	67
	68	/*
	69	* Partitions
	70	*/
	71	#define CONFIG_DOS_PARTITION
	72	#define CONFIG_BZIP2
	73
a59996e3 AG	74	/*
	75	* Video
	76	*/
	77	#define CONFIG_VIDEO
	78
	79	#ifdef CONFIG_VIDEO
	80	#define CONFIG_VIDEO_MB862xx
	81	#define CONFIG_VIDEO_MB862xx_ACCEL
	82	#define CONFIG_VIDEO_CORALP
	83	#define CONFIG_CFB_CONSOLE
	84	#define CONFIG_VIDEO_LOGO
348de314	85	#define CONFIG_VIDEO_BMP_LOGO
a59996e3 AG	86	#define CONFIG_VIDEO_SW_CURSOR
	87	#define CONFIG_VGA_AS_SINGLE_DEVICE
	88	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	89	#define CONFIG_SPLASH_SCREEN
	90	#define CONFIG_VIDEO_BMP_GZIP
	91	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */
	92
	93	/* Coral-PA clock frequency, geo and other both 133MHz */
	94	#define CONFIG_SYS_MB862xx_CCF 0x00050000
	95	/* Video SDRAM parameters */
	96	#define CONFIG_SYS_MB862xx_MMR 0x11d7fa72
	97	#endif
	98
5c4fa9b4 GB	99	/*
	100	* Command line configuration.
	101	*/
	102	#include <config_cmd_default.h>
	103
a59996e3 AG	104	#ifdef CONFIG_VIDEO
	105	#define CONFIG_CMD_BMP
	106	#endif
5c4fa9b4 GB	107	#define CONFIG_CMD_CACHE
	108	#define CONFIG_CMD_DATE
	109	#define CONFIG_CMD_DHCP
	110	#define CONFIG_CMD_DIAG
	111	#define CONFIG_CMD_EEPROM
	112	#define CONFIG_CMD_ELF
	113	#define CONFIG_CMD_EXT2
	114	#define CONFIG_CMD_FAT
	115	#define CONFIG_CMD_I2C
	116	#define CONFIG_CMD_IDE
	117	#define CONFIG_CMD_IRQ
	118	#define CONFIG_CMD_MII
	119	#define CONFIG_CMD_PCI
	120	#define CONFIG_CMD_PING
	121	#define CONFIG_CMD_REGINFO
	122	#define CONFIG_CMD_SAVES
f1f66edf	123	#define CONFIG_CMD_SPI
5c4fa9b4 GB	124	#define CONFIG_CMD_USB
5c4fa9b4 GB	125
14d0a02a	126	#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)
5c4fa9b4 GB	127	#define CONFIG_SYS_LOWBOOT 1
	128	#endif
	129
	130	/*
	131	* Autobooting
	132	*/
	133	#define CONFIG_BOOTDELAY 1
	134
	135	#undef CONFIG_BOOTARGS
	136
ff27650b DZ	137	#define CONFIG_EXTRA_ENV_SETTINGS \
	138	"fw_image=digsyMPC.img\0" \
	139	"mtcb_start=mtc led diag orange; run mtcb_1\0" \
	140	"mtcb_clearled=for x in user1 user2 usbpwr usbbusy; " \
	141	"do mtc led $x; done\0" \
	142	"mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; " \
	143	"else run mtcb_fw; fi\0" \
	144	"mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; " \
	145	"else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0" \
	146	"mtcb_update=mtc led user1 orange;" \
	147	"while mtc key; do ; done; run mtcb_2;\0" \
	148	"mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0" \
	149	"mtcb_usb1=if fatload usb 0 400000 script.img; " \
	150	"then run mtcb_doscript; else run mtcb_usb2; fi\0" \
	151	"mtcb_usb2=if fatload usb 0 400000 $fw_image; " \
	152	"then run mtcb_dousb; else run mtcb_ide; fi\0" \
	153	"mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; " \
	154	"run mtcb_wait_flickr mtcb_ds_1;\0" \
	155	"mtcb_ds_1=if imi 400000; then mtc led usbbusy; " \
	156	"source 400000; else run mtcb_error; fi\0" \
	157	"mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0" \
	158	"mtcb_du_1=if imi 400000; then run mtcb_du_2; " \
	159	"else run mtcb_error; fi\0" \
	160	"mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; " \
	161	"run mtcb_checkfw\0" \
	162	"mtcb_checkfw=if imi ff000000; then run mtcb_success; " \
	163	"else run mtcb_error; fi\0" \
	164	"mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0" \
	165	"mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0" \
	166	"mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\
	167	"mtcb_uledflckr=mtc led user1 orange 11\0" \
	168	"mtcb_error=mtc led user1 red\0" \
	169	"mtcb_clear=erase ff000000 ff0fffff\0" \
	170	"mtcb_prog=cp.b 400000 ff000000 ${filesize}\0" \
	171	"mtcb_success=mtc led user1 green\0" \
	172	"mtcb_ide=if fatload ide 0 400000 $fw_image;" \
	173	"then run mtcb_doide; else run mtcb_error; fi\0" \
	174	"mtcb_doide=mtc led user2 green 1;" \
	175	"run mtcb_wait_flickr mtcb_di_1;\0" \
	176	"mtcb_di_1=if imi 400000; then run mtcb_di_2;" \
	177	"else run mtcb_error; fi\0" \
	178	"mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0" \
	179	"ramdisk_num_sector=16\0" \
	180	"flash_base=ff000000\0" \
	181	"flashdisk_size=e00000\0" \
	182	"env_sector=fff60000\0" \
	183	"flashdisk_start=ff100000\0" \
	184	"load_cmd=tftp 400000 digsyMPC.img\0" \
	185	"clear_cmd=erase ff000000 ff0fffff\0" \
	186	"flash_cmd=cp.b 400000 ff000000 ${filesize}\0" \
	187	"update_cmd=run load_cmd; " \
	188	"iminfo 400000; " \
	189	"run clear_cmd flash_cmd; " \
	190	"iminfo ff000000\0" \
	191	"spi_driver=yes\0" \
	192	"spi_watchdog=no\0" \
	193	"ftps_start=yes\0" \
	194	"ftps_user1=admin\0" \
	195	"ftps_pass1=admin\0" \
	196	"ftps_base1=/\0" \
	197	"ftps_home1=/\0" \
	198	"plc_sio_srv=no\0" \
	199	"plc_sio_baud=57600\0" \
	200	"plc_sio_parity=no\0" \
201	"plc_sio_stop=1\0" \
202	"plc_sio_com=2\0" \
203	"plc_eth_srv=yes\0" \
204	"plc_eth_port=1200\0" \
205	"plc_root=/ide/\0" \
206	"diag_level=0\0" \
207	"webvisu=no\0" \
208	"plc_can1_routing=no\0" \
209	"plc_can1_baudrate=250\0" \
210	"plc_can2_routing=no\0" \
211	"plc_can2_baudrate=250\0" \
212	"plc_can3_routing=no\0" \
213	"plc_can3_baudrate=250\0" \
214	"plc_can4_routing=no\0" \
215	"plc_can4_baudrate=250\0" \
216	"netdev=eth0\0" \
217	"console=ttyPSC0\0" \
218	"kernel_addr_r=400000\0" \
219	"fdt_addr_r=600000\0" \
220	"nfsargs=setenv bootargs root=/dev/nfs rw " \
221	"nfsroot=${serverip}:${rootpath}\0" \
222	"addip=setenv bootargs ${bootargs} " \
223	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
224	"${netmask}:${hostname}:${netdev}:off panic=1\0" \
5c4fa9b4	225	"addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\
ff27650b DZ	226	"rootpath=/opt/eldk/ppc_6xx\0" \
	227	"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
	228	"tftp ${fdt_addr_r} ${fdt_file};" \
	229	"run nfsargs addip addcons;" \
	230	"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
	231	"load=tftp 200000 ${u-boot}\0" \
	232	"update=protect off FFF00000 +${filesize};" \
	233	"erase FFF00000 +${filesize};" \
	234	"cp.b 200000 FFF00000 ${filesize};" \
	235	"protect on FFF00000 +${filesize}\0" \
5c4fa9b4 GB	236	""
5c4fa9b4 GB	237
ff27650b DZ	238	#define CONFIG_BOOTCOMMAND "run mtcb_start"
ff27650b DZ	239
f1f66edf GB	240	/*
	241	* SPI configuration
	242	*/
	243	#define CONFIG_HARD_SPI 1
	244	#define CONFIG_MPC52XX_SPI 1
	245
5c4fa9b4 GB	246	/*
	247	* I2C configuration
	248	*/
	249	#define CONFIG_HARD_I2C 1
	250	#define CONFIG_SYS_I2C_MODULE 1
	251	#define CONFIG_SYS_I2C_SPEED 100000
	252	#define CONFIG_SYS_I2C_SLAVE 0x7F
	253
	254	/*
	255	* EEPROM configuration
	256	*/
	257	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
	258	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	259	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	260	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
	261
	262	/*
	263	* RTC configuration
	264	*/
466f0137 HS	265	#if defined(CONFIG_DIGSY_REV5)
	266	#define CONFIG_SYS_I2C_RTC_ADDR 0x56
	267	#define CONFIG_RTC_RV3029
a01ebd96 HS	268	/* Enable 5k Ohm trickle charge resistor */
a01ebd96 HS	269	#define CONFIG_SYS_RV3029_TCR 0x20
466f0137	270	#else
5c4fa9b4 GB	271	#define CONFIG_RTC_DS1337
5c4fa9b4 GB	272	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
c569ad6e	273	#define CONFIG_SYS_DS1339_TCR_VAL 0xAB /* diode + 4k resistor */
466f0137	274	#endif
5c4fa9b4 GB	275
	276	/*
	277	* Flash configuration
	278	*/
	279	#define CONFIG_SYS_FLASH_CFI 1
	280	#define CONFIG_FLASH_CFI_DRIVER 1
	281
466f0137 HS	282	#if defined(CONFIG_DIGSY_REV5)
	283	#define CONFIG_SYS_FLASH_BASE 0xFE000000
	284	#define CONFIG_SYS_FLASH_BASE_CS1 0xFC000000
	285	#define CONFIG_SYS_MAX_FLASH_BANKS 2
927d2cea HS	286	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
927d2cea HS	287	CONFIG_SYS_FLASH_BASE_CS1}
466f0137 HS	288	#define CONFIG_SYS_UPDATE_FLASH_SIZE
	289	#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
	290	#else
5c4fa9b4	291	#define CONFIG_SYS_FLASH_BASE 0xFF000000
5c4fa9b4	292	#define CONFIG_SYS_MAX_FLASH_BANKS 1
466f0137 HS	293	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
	294	#endif
	295
5c4fa9b4 GB	296	#define CONFIG_SYS_MAX_FLASH_SECT 256
	297	#define CONFIG_FLASH_16BIT
	298	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
466f0137	299	#define CONFIG_SYS_FLASH_SIZE 0x01000000
5c4fa9b4 GB	300	#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
	301	#define CONFIG_SYS_FLASH_WRITE_TOUT 500
	302
	303	#define CONFIG_OF_LIBFDT 1
	304	#define CONFIG_OF_BOARD_SETUP 1
	305
	306	#define OF_CPU "PowerPC,5200@0"
	307	#define OF_SOC "soc5200@f0000000"
	308	#define OF_TBCLK (bd->bi_busfreq / 4)
	309
	310	#define CONFIG_BOARD_EARLY_INIT_R
	311	#define CONFIG_MISC_INIT_R
	312
	313	/*
	314	* Environment settings
	315	*/
	316	#define CONFIG_ENV_IS_IN_FLASH 1
	317	#if defined(CONFIG_LOWBOOT)
	318	#define CONFIG_ENV_ADDR 0xFF060000
	319	#else /* CONFIG_LOWBOOT */
	320	#define CONFIG_ENV_ADDR 0xFFF60000
	321	#endif /* CONFIG_LOWBOOT */
	322	#define CONFIG_ENV_SIZE 0x10000
	323	#define CONFIG_ENV_SECT_SIZE 0x20000
	324	#define CONFIG_ENV_OVERWRITE 1
	325
	326	/*
	327	* Memory map
	328	*/
	329	#define CONFIG_SYS_MBAR 0xF0000000
	330	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	331	#if !defined(CONFIG_SYS_LOWBOOT)
	332	#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
	333	#else
	334	#define CONFIG_SYS_DEFAULT_MBAR 0xF0000000
	335	#endif
	336
	337	/*
	338	* Use SRAM until RAM will be available
	339	*/
	340	#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
553f0982	341	#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
5c4fa9b4	342
5c4fa9b4	343	#define CONFIG_SYS_GBL_DATA_OFFSET \
25ddd1fb	344	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
5c4fa9b4 GB	345	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
5c4fa9b4 GB	346
14d0a02a	347	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
5c4fa9b4 GB	348	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
	349	#define CONFIG_SYS_RAMBOOT 1
	350	#endif
	351
	352	#define CONFIG_SYS_MONITOR_LEN (256 << 10)
	353	#define CONFIG_SYS_MALLOC_LEN (4096 << 10)
	354	#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
	355
	356	/*
	357	* Ethernet configuration
	358	*/
	359	#define CONFIG_MPC5xxx_FEC 1
	360	#define CONFIG_MPC5xxx_FEC_MII100
1b41493d HS	361	#if defined(CONFIG_DIGSY_REV5)
	362	#define CONFIG_PHY_ADDR 0x01
	363	#else
5c4fa9b4	364	#define CONFIG_PHY_ADDR 0x00
1b41493d	365	#endif
5c4fa9b4 GB	366	#define CONFIG_PHY_RESET_DELAY 1000
	367
	368	#define CONFIG_NETCONSOLE /* include NetConsole support */
	369
	370	/*
	371	* GPIO configuration
12602339 GB	372	* use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1)
	373	* Bit 0 (mask 0x80000000) : 0x1
	374	* SPI on Tmr2/3/4/5 pins
	375	* Bit 2:3 (mask 0x30000000) : 0x2
	376	* ATA cs0/1 on csb_4/5
	377	* Bit 6:7 (mask 0x03000000) : 0x2
	378	* Ethernet 100Mbit with MD
	379	* Bits 12:15 (mask 0x000f0000): 0x5
	380	* USB - Two UARTs
	381	* Bits 18:19 (mask 0x00003000) : 0x2
	382	* PSC3 - USB2 on PSC3
	383	* Bits 20:23 (mask 0x00000f00) : 0x1
	384	* PSC2 - CAN1&2 on PSC2 pins
	385	* Bits 25:27 (mask 0x00000070) : 0x1
	386	* PSC1 - AC97 functionality
	387	* Bits 29:31 (mask 0x00000007) : 0x2
5c4fa9b4 GB	388	*/
	389	#define CONFIG_SYS_GPS_PORT_CONFIG 0xA2552112
	390
	391	/*
	392	* Miscellaneous configurable options
	393	*/
	394	#define CONFIG_SYS_LONGHELP
	395	#define CONFIG_AUTO_COMPLETE 1
a781de12	396	#define CONFIG_CMDLINE_EDITING 1
5c4fa9b4	397	#define CONFIG_SYS_HUSH_PARSER
5c4fa9b4	398
5c4fa9b4 GB	399	#define CONFIG_LOOPW 1
	400	#define CONFIG_MX_CYCLIC 1
	401	#define CONFIG_ZERO_BOOTDELAY_CHECK
	402
	403	#define CONFIG_SYS_CBSIZE 1024
	404	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	405	#define CONFIG_SYS_MAXARGS 32
	406	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	407
	408	#define CONFIG_SYS_ALT_MEMTEST
	409	#define CONFIG_SYS_MEMTEST_SCRATCH 0x00001000
	410	#define CONFIG_SYS_MEMTEST_START 0x00010000
	411	#define CONFIG_SYS_MEMTEST_END 0x019fffff
	412
	413	#define CONFIG_SYS_LOAD_ADDR 0x00100000
	414
5c4fa9b4 GB	415	/*
	416	* Various low-level settings
	417	*/
	418	#define CONFIG_SYS_SDRAM_CS1 1
	419	#define CONFIG_SYS_XLB_PIPELINING 1
	420
	421	#define CONFIG_SYS_HID0_INIT HID0_ICE \| HID0_ICFI
	422	#define CONFIG_SYS_HID0_FINAL HID0_ICE
	423
	424	#if defined(CONFIG_SYS_LOWBOOT)
	425	#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
	426	#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
	427	#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00
	428	#endif
	429
	430	#define CONFIG_SYS_CS4_START 0x60000000
	431	#define CONFIG_SYS_CS4_SIZE 0x1000
	432	#define CONFIG_SYS_CS4_CFG 0x0008FC00
	433
	434	#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
	435	#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
	436	#define CONFIG_SYS_CS0_CFG 0x0002DD00
	437
466f0137 HS	438	#if defined(CONFIG_DIGSY_REV5)
	439	#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE_CS1
	440	#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE
	441	#define CONFIG_SYS_CS1_CFG 0x0002DD00
	442	#endif
	443
5c4fa9b4 GB	444	#define CONFIG_SYS_CS_BURST 0x00000000
	445	#define CONFIG_SYS_CS_DEADCYCLE 0x11111111
	446
	447	#if !defined(CONFIG_SYS_LOWBOOT)
	448	#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
	449	#else
	450	#define CONFIG_SYS_RESET_ADDRESS 0xff000100
	451	#endif
	452
	453	/*
	454	* USB
	455	*/
	456	#define CONFIG_USB_OHCI_NEW
	457	#define CONFIG_SYS_OHCI_BE_CONTROLLER
	458	#define CONFIG_USB_STORAGE
	459
	460	#define CONFIG_USB_CLOCK 0x00013333
	461	#define CONFIG_USB_CONFIG 0x00002000
	462
	463	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
	464	#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB
	465	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200"
	466	#define CONFIG_SYS_USB_OHCI_CPU_INIT
	467
	468	/*
	469	* IDE/ATA
	470	*/
	471	#define CONFIG_IDE_RESET
	472	#define CONFIG_IDE_PREINIT
	473
	474	#define CONFIG_SYS_ATA_CS_ON_I2C2
	475	#define CONFIG_SYS_IDE_MAXBUS 1
	476	#define CONFIG_SYS_IDE_MAXDEVICE 1
	477
	478	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
	479	#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
	480	#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
	481	#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
	482	#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
	483	#define CONFIG_SYS_ATA_STRIDE 4
	484
	485	#define CONFIG_ATAPI 1
	486	#define CONFIG_LBA48 1
	487
	488	#endif /* __CONFIG_H */